Crash Of A Newly Install Windows 7 System - Error 0x80041003
Nov 10, 2012
I just had my newly installed Windows 7 32 bit system crash. Here is the error code from the event viewer. Can anyone tell me what I can do to resolve this error?Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
i was unable to create a restore point(or should i say the restore point which were created were all shown up with this following error earlier, Error message was: "System Restore" did not complete successfully. Your computer's system files and settings were not changed."Details: An unspecified error occurred during System Restore (0xc0000022).Anyways,today as i was updating my display driver,while uninstalling the old display driver and installing the latest one,my system didn't accept the driver and thus my system went out of order(more preciously,as i uninstalled the whole catalyst control centre,every icon was appearing bigger and my display adapter was also deleted). now, coming back to the problem, when i tried to go back to a restre point ,i actaually managed to get all my previous settings back but after the completion of system restore that same message was again there which saidError message was: "System Restore" did not complete successfully. Your computer's system files and settings were not changed."Details: An unspecified error occurred during System Restore (0xc0000022).Now,i am a bit confused to what actually happened as all my settings were back and the system was there in its previous setings but then why i got that error message?
I have put together a computer, new motherboard, processor, hard drive, everything. Now I'm trying to install Windows 7 from a boot DVD, but obviously have no drivers installed, so my computer doesn't communicate with my monitor. I guess I'm stuck between needing the driver installed, but needing Windows to install the driver? Do I need to install MS-DOS or something first?I have a completely blank hard drive. Trying to install Windows 7 Pro, 64-bit.
I needed to upgrade anyway, so I bought a new motherboard, new SATA HDD and a new copy of Windows 7 Home Premium..I had problems with th initial install, it started hanging three quarters of the way through, I checked online and found that if I disconnected all USB connections it installed fine.Now installed it won't load up correctly, or if it does it crashes almost straight away, it runs fine in safe mode, but I can't use Windows Update in safe mode.Rather than reinstall again.I've got the feeling the problem may relate to the build rather than the software, but wanted to check if anyone had experienced similar problems?
I have: reset the icon cache, reset registry settings (perhaps regretting it now? no effect), tried IconPackager.So the problem is that I have missing icons for all .exe's on my system, except newly installed ones. I also have a problem with any folder that contains a file. (when a folder has a file in it, it shows a preview of it inside the folder: that is the icon that is messed up, the normal folder with nothing in it is fine).I replaced that icon a while ago and then tried to set it back with IconPackager, but it never reset that icon (all the rest are fine). Lastly, shortcut icons are also screwed up.I can manually reset shortcut icons by re-referencing the .exe, but not the .exe icons themselves.
I believe this may be to do with the fact that IconPackager was intended for XP or something like that, because I've readthat the way icons are linked to applications is done differently between the two OS.So, what I need is a way to, en mass, link all .exe's with their own icons that are bundled inside the .exe.Be it an app, a cmd line, whatever.I also need a way to reset that folder problem. I've tried with the Registry to no effect.
Last night, I built my first desktop machine. Most of my components were brand new, but I kept my old hard drive.(Which contained my Windows Home Premium 64 bit OS on it.)
When I finally went to power it up for the first time, it booted up normally, and then when it goes to the black screen with the colors swirling together to make the windows logo, right away it quickly flashed to a blue screen and then restarted.
I then went into the repair windows mode, but the automatic repairs failed. They left me with these details:
Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385 Problem Signature 03: unknown Problem Signature 04: 21200924 Problem Signature 05: Autofailover Problem Signature 06: 3 Problem Signature 07: No Root Cause OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033
The hard drive with the operating sytem was working fine for me yesterday in my old machine. So I am assuming it has to be a problem with the new hardware, or I failed to connect something, or i need to change a setting.
Some when we're installing applications they're requesting for "Restart PC before use that Software" (You must restart PC before use this software). So are there any way to run that newly installed application without restart PC or longing-off PC.
I have an ASUS G73 laptop and have installed an OCZ 240GB SSD drive. The laptop currently has Windows 7 Home premium 64 on it on the original drive. I would like to install a new Windows 7 Professional 64 version on the new drive and be able to dual boot. I have formatted the new drive and it is recognized in My Computer and I can save files on it.When i tried to install 7 Pro, it would not show the new drive as an option to install on. I tried this by inserting the disc in the DVD drive and by rebooting with the DVD in the drive. I also took the original drive out of it's bay and tried to reboot and could not get it to install. I then moved the new drive to the original drive's bay and rebooted and could not get it to install.When you all finish giggling about all the stuff I went through, could you post a guide on what I can do to get it to install?
When I created a new user (with Admin privileges) and log into it, it will not connect to the wi-fi network. It detects the network, but will not connect.
When I try to run the Wi-Fi Configuration utility from the manufacturer its says the the Wi-Fi Adaptor is not found. When I check under the Device Manager while in that user account, the adaptor is shown as working properly.
The Network and Sharing centre shows nothing to indicate the error in either account; the troubleshooting fails to fix the problem when run.
Its all very strange and I have no idea what to do. Any clues would be most welcome.
The card is a new D-Link Wireless G DWA-510 Desktop Adaptor (PCI).
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
I was attempting to reinstall Windows 7 because it was getting slow, and I was almost finished and was on Completing Installation... phase I get an error saying that "Windows could not configure one or more system components" and then it started rolling back the system. I'm using Windows 7 Ultimate and I never had this problem before.
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
I had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
I had Windows 7 automatically downloading and installing critical updates. NO MORE!!! On 8/7/2012 a critical update was automatically downloaded and installed, unnoticed by me. When my computer would not turn on yesterday, 8/8/12 I tried many things, eventually restarting in Safe Mode - which did at least get me out of the black error screen and into windows. After poking around and testing things, I finally decided the only way to go was System Restore. There, I found there'd been an automatic critical update on 8/7/12. After restoring to before that point and turning off all automatic windows updates, my computer is now running fine.
Mmy computer with windows 7 failed and will not reboot, I have an external hard drive set as a back-up. What do I need to do to put the backed up stuff in my new computer with windows 8 ?
Now the problem:Insert disc and boot, no problem. Windows 7 sees the SSD and installs.Once install completes, PC reboots and attempts to complete installation. Another reboot occurs now and upon restarting a message pops up saying that an error occurred and installation cannot continue and to start it all again.Sometimes instead of rebooting it will flash different colours on the screen.BIOS is set to AHCI (i have tried IDE as well, same problem)Installing the OS to a normal SATA drive works OK.Have tried using Acronis to clone the disk but this doesn't work, i'm assuming the 100MB partition Windows 7 creates may causes some problems when imaging and redeploying.
I am having a problem with doing a fresh install of Windows 7. It is on a Dell Inspiron 1546 with a 150 GB hard drive. There was an original install but the computer was having issues as some files were corrupted. I used the Windows 7 disc to format the hard drive and booted from CD after restarting.
However when I try to install the new Windows 7 it sits at the part where it says: Expanding files. Then after a while an error pops up that says: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information
I recently did a whole new build, new hard drive, mobo (GA-P35-DS3L/S3L) and processor. The problem is, I'm trying to install Windows 7 Ultimate and I come up with "Insert system disk and press enter" error when I try to boot from the disk. I checked the BIOS and the mobo had recognized the DVD drive and the hard drive. I tried putting the hard drive under slave and the DVD drive under master, and vice-versa. I am a high school student who generally gets lots of home work, so it would be nice to be able to type out my work.
I got a new laptop, an LG A550, with an i5 and Geforce 640M two weeks ago things were running ok until yesterday, i was playing online and suddenly the flash game crashed. i thought it was a flash player problem, so i updated it, and problems began: not only stills with the game not loading, but also i had most web pages not loading properly. taking lots of time to load and when it happens it shows an text only creepy version of it that happens to facebook, kongragate and other sites i guess uses flash, but google and gmail and this forum works ok then i tried to update the java, but that bug makes me not be able to download that update.
I got mad and tried system restore. All attempts failed. Finally i tried to restore the whole system to factory conditions, to get rid of ALL softwares i had installed in this two weeks. when completed, guess what... the issue CONTINUES!
what should i do now? could be a problem with the files at the D partition? a hardware problem? or some rare hard time register bug?
i bought a new setup, moved all old stuff to another empty computer case or what.the only i didnt moved to the old case was the PSU and some harddrives. first time i started the computer with the SSD (with functional OS of win7x64)everything works fine.. but it crashed some random times inside the windows, i thought it was because of the drivers, i got that fixed by removing one graficcardSo i thought it was better to whip all the data from SSD and make a clean installation, stability installation.i wipe the SSD drive from my old OS and installed a new one, in one step of the win7x64 installation, it crash and wont boot upstrange, i had not been at the bios with my fingers, after trying with some solution in 6h i change the ODC-> marvellSata6G controller to AHCI mode, main -> storage configuration to ACHI, in bios. Wont work.. I tried to change them to IDE, wont work either. I removed the two others ram sticks, it wont work either..uhm,the total time i been working of this in three days to get a clean Windows 7 to boot at this motherboardat last.. i luckly installed the OS to the SSD at my new setup and then move it to the old setup. That works.. first time, then the computer wont boot windows again.
A few days ago (8/6/2012) my system started experiencing hourly system crashes to the tee. No matter what I'm doing (gaming, skyping, browsing, idle) the OS siezes. Things I've done so far:
1) Reviewed event logs
2) Updated Motherboard & Video card drivers
3) Disabled all scheduled tasks
4) Reviewed memory.dmp (outdated - no new dumps)
5) Configured performance monitoring
6) Ran CCleaner
7) Disabled/Uninstalled unused applications
8) Watched process explorer around problematic time for any noticeble spikes. (none were found)
9) I've also ensured my antivirus has the latest definitions and ran a full scan. To be safe I also scan'd using trenmicro which came up empty.
By reviewing the event logs I learned that the crashes have been occurring every hour. A small sample shown below:
----------------------------------- Log Name: System Source: Microsoft-Windows-Kernel-Power Date: 8/8/2012 2:40:04 AM Event ID: 41
I am helping a friend with her Windows 7 laptop which crashed this evening. Startup repair has tried several times but still cannot fix the problem. System Restore fails as well despite trying numerous restore points.The log show that a root cause was found:
Boot critical file C:CI.dll is corrupt
She has important personal data on this system so a fresh OS install is not an option yet.THis will be a good learning experience for me as I am looking into starting my own computer repair business. I'm not quite sure how to proceed with this. What should I do from here? Do I need to remove her HD and use a data recovery app on a separate system to recover her files, then reinstall Windows 7?
The kernel Power errors happen when ever I play a rather large game, such as Left 4 Dead, Left 4 Dead 2, Dead Rising 2, Assassins Creed Series, and Battlefield Bad Company 2. I've tried unplugging all my external devices such as, my headset, It worked for about two weeks, but then the errors started happening again. I had this computer custom built for gaming, It's not even a third full, And I want this to stop. I've updated all my drivers, Uninstalled tons of my games, just to get one working. The errors don't occur immediately once I run the game. It takes about 20 minutes more or less to stop. The computer doesn't freeze, or give any warning that it's about to happen. Just swiftly shuts off. I gave up for a while and tried to restore my system to factory settings. I can't restore it to factory settings, because I don't know where the disc is, and when I try to reset it by a restore point, the restore points are only for this month.
I installed the Brother Driver for my 8670 printer. I'm running Windows 7. My computer keeps restarting then giving me an error that Google Chrome crashed and all settings are lost. I now get a pertetual Windows Error Recovery screen?
I don't understand why this system is crashing. Replace motherboard and it keeps doing it no rhythm or reason to it. So I thought I give it a push out to here to see if I can get any feedback from you all.
i got a big problem with my cherry keyboard Cherry - eVolution SIRIUS XT Wireless MultiMedia Desktop
all hotkeys worked properly until my system crashed due to some OC. now all other keys work but hotkeys (play, mute, forward, backward, volume up, volume down, calculator, e-mail, home and sleep) which are all hotkeys my keyboard has. they were all global setted so i was able to skip tracks while musicplayer was in tray on default settings. i tried to reinstall windows plug&play-drivers
we just wanted to know how to report this problem of his where all of a sudden, he couldn't stream videos anymore without his laptop crashing.can i use the bsod reporting tool for this even though he doesn't encounter the bsod?he can view video files (with vlc for example), but when streaming videos like on Internet or dailymotion... his system freezes immediately as soon as the video loads and all he can do is restart.he's running windows 7 home basic 32-bit on a laptop with the following specs:cpu: intel(r) core(tm) i3 cpu m 370 @ 2.40ghzmobo: samsung electronics co., ltd. r439 bios: phoenix securecore(tm) nb version 03us.m004.20100605.leoram: total memory 2.00 gb usable 1.93 gbhdd: toshiba m3265gsxgpu: ati mobility radeon hd 545v audio: (1) ati high definition audio device (2) realtek high definition audio s: microsoft windows 7 home basic 32-bit 7601 multiprocessor free service pack 1
I have a C-media sound card (CMI8738/C3DX PCI audio device) that was running fine on XP. But since I changed to Windows 7, the sound became choppy and delayed when watching videos. I used the same driver that I used on XP, I tried updating but Windows 7 said its already up-to-date.
The worst part: I tried uninstalling the driver and my PC turned grayish white..one time I even saw pixels of my mouse on the corner screen, much like a distorted screen of some sort. Even disabling the device crashed the screen same as uninstalling it (like a BSoD). Now I can't change the driver.
Details: MOBO: ECS P4M800 Processor: Pentium D RAM: 1GB Video card: internal, 32 MB shared
Also, my MOBO had internal sound cards running previously on realtek that got busted after an internal short circuit...damn. Its undetected at the device manager.
My event viewer keeps showing error 10016 causing my computer to crash.I've seen the tutorials but I don't know what caused my problem; I don't run any servers.Sometimes, it crashes without error 10016, though I think its the main problem.Error 10016: The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID[CODE]
I read through a few threads with similar topics but the issues were either not quite the same and/or resolved comparatively easily. I am trying to repair a 1.5 year-old HP Pavilion running Windows 7 Home Premium 64. This machine is used as the main office computer in a small doctor's office. In spite of my warnings, anti-virus software was not installed until it was too lateThere was a major issue about seven months ago that required another company to repairThe problem is explorer.exe will not run. Double-clicking a shortcut on the desktop, clicking the text name of a program from the Start menu, and even in the cmd results in the same response, a dialog box pops up stating windows explorer has stopped working.
windows is checking for a solution to the problem. followed by another box stating windows explorer is restarting. But the requested application never starts. I have run the Ultimate Boot CD 4 Win, replaced the hard drive and cloned all data, run numerous registry scans, malware scans and antivirus scans. Initially removing over 1500 virus/malware hits and over 1400 registry errors. But the main problem persists, explorer.exe won't open programs.