I had a problem with my windows 7 partition (I ran partition magic 8 on it and let it "fix" the drive, bad mistake and FYI it was a accident). Anyway following this the computer froze and I went to reboot. When I restarted, I got a currupt file system message and no boot.. I had another hard drive sitting aroung and I reinstalled 7 on this new drive. I then plugged in the original hard drive to try to copy files off of it and I got the message that the original drive file system was corrupt and "would you like to format it?" question.
I said no and backed out. I then took this drive and plugged it into a windows XP computer via external USB port and I was able to access files no problem. I could see the files and was able to transfer them to the new drive through sharing of the drives on my network. I think this is interesting (weird really) that Windows 7 wanted to format the drive yet Windows XP saw the files just fine and I was able to save them easily. This actually has happended twice now where Windows 7 says a drive is corrupt and can't be read, but windows XP sees it just fine.
I checked the forums and could not find my specific issue.
The other day, I successfully installed Windows 7 Ultimate (full version, clean install) on my primary "C" partition and everything worked. Now, I believe I have a corrupt OS. When I attempt to boot normally, I receive an "Error loading operating sytem" message. The Windows 7 installation CD is detected, and begins booting, but following the "loading Windows" screen no options are displayed.
Here is what I did to cause this issue:
-I had an old external drive not compatible with Windows 7, so I decided to try and install XP onto a secondary partition.
-In order to create this partition during the installation, I deleted my "E" partition which I had previously locked with BitLocker. I left my "C" partition (System Rese) and "D" partition (with Windows 7) in tact.
-I began installing Windows XP. Upon reboot, I received my first "Operating SYstem Not Deteced" error.
-I tried booting from my WIndows 7 CD to see what was going on, but following the boot from the CD, the installation program stpped running before any options were displayed. This occured after the "Starting windows" message was displayed.
-I tried booting from the Windows XP install CD. This CD boot properly. I deleted the partition I had attempted to install XP on.
-I tried booting normally, and "Operating SYstem Not Deteced"
-I tried booting from the WIndows 7 CD again and "Operating SYstem Not Deteced"
At this point, I am considering loading from the XP CD and deleting all partions with hopes for a fresh Windows 7 installation.
Anything else I should try before deleting my partitions?
Toshiba Laptop running windows 7 64 bit. 4 gigs ram. T4500 processor.In a new house, just installed a new wireless router (linksys WRT something) with encryption.I am having difficulty downloading anything from the internet. Browsing works just fine but whenever I load a video or download a file of any size I get difficulties.After downloading Silverlight or Steam and attempting to install I get a message that the file is corrupt.Google downloader (trying to reinstall chrome) and windows update will both download just fine up a certain point then the download will abruptly stop, even though the internet is still working.This is an ongoing theme with movies as well. They will buffer to a point then the video will be unable to play past that point.I have tried going around the router and using a different browser both to no avail. I ran spybot and had to download updates from 2 different locations because 3 items would not download from the first server. Several problems were found but my problem was not fixxed.
I have an Acer Aspire one. It came with XP and I have it dual booting into Windows 7 which is working well which I installed from a USB Drive as this model doesnt have a CD Drive.
In the main boot screen it says "Earlier version of Windows" For XP and "Windows 7" for windows 7. All was working well until yesterday...
Now I can't boot into "Earlier version of Windows" i.e. XP. It gives me the C:\windows\system32\config\system is missing or corrupt message. I can boot into Windows 7 fine but all of my work stuff is on the XP platform (I know I can access the files from "7" but I need to get it operational again).
Any ideas? Can I do a repair from the USB Drive?..I've tried a couple of things to boot from the USB Drive but to no avail. And I can't find the BOOT.INI file from XP (I think it gets moved to Windows 7's hidden boot partition when I installed it. I cant seem to access that partition either).
I have a bit of an odd problem, I have an external USB 640gb hard drive (Freecom ToughDrive with Password encryption software removed using Freecom tool), I use it at home (on a new dell Windows 7 64 bit PC) to store all my dataIf I take the drive into the office and plug it into my machine there (Windows XP) I can read all the files, copy them off, no problem, same with my Windows 7 (64 bit) laptop that I have at home as well and on my Mum's (windows 7) laptop.The problem is that if I open a file on any of the non home PC's (a word document or a JPG etc) if I then save changes to the file, when I try to open it on the home machine it either says it is corrupted/unreadable or that in the case of a folder of documents I copied on yesterday in the office - that the folder contents were not accessible.
I have just tried opening a word (2003) doc that I saved on the drive in the office yesterday on my home machine and word shows that it is goobledygook, I have closed the file (without saving or editing on the home machine) unplugged the drive and plugged the drive into my windows 7 laptop and when I view the folder with the word file in, the file has now gone...I have also noticed that when I have created this 'corrupted' file situation, when I then plug the drive into a different machine I get the windows "scan and fix" option. I have done that in the past and it has 'found' all the files that I corrupted on the other machines and stuck them in a $found folder as though there was actual hard drive corruption.Until about 6 months ago I had a Windows XP machine and have been working with an external USB drive for years switching it between many different machines - I thought it was the drive (I originally had a freecom toughdrive 320gb) at first so I replaced that about 2 months ago when I realised what was going on but it hasn't made any difference.
no problems with Vista in another partition nor with XP.
I scanned the (two year old) hard drive with tool downloaded from Seagate
and found no problem.
I have just installed the newly released Windows 7 on a different partition and the same problem is happening. Any clues as to why this is happening and why should it only happen to Windows 7 and why now?
My C: drive seem's corrupt. Can't boot my win7, neither in safe mode. Did try to repair my version 64 with the installation disk, no luck, same problem.
How can i do a repair disk on the drive like chkdsk on it. Is there a tool in the installation disk?
I an trying to recover data from a seemingly corrupt drive in 500 gig sata HDD which I ran in windows 7 on 64 bit and I made two partitions one being a boot and the other had data on it and then I had one other sata drive that was 200 gig on separate drive with data! When I run on another computer it doesn't seem to read anything or recognize data!how to recover it?
I've got a corrupt file on my TomTom ONE Third Edition. TomTom support has been unhelpful, and Google has let me down for the last 2 hours. I've tried programs like ChkDsk, Move On Boot, Unlocker, and FileASSASSIN.
I am running Windows 7 Ultimate, and the file that needs to be deleted is ttsystem.
I can't access my external hard drive on my computer but I can from my laptop I get the message the drive is not accessible,'access is denied'. I was able to until recently, I use it for my backup.
I was trying to backup my flash drive and all of a sudden, it did not work. I kept plugging my flash drive in and out but that did not work. Here is the error that I got."The last backup did not complete successfully because Windows Backup could not backup any of the drives in the backup. Make sure that the drives are plugged in and working correctly."The error above is the message when i backed up my flash drive. Here is the system informationTech Support Guy System Info Utility version 1.0.0.2 OS Version microsoft Windows 7 Home Premium, 64 bit Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5 Processor Count 4 RAM: 7860 Mb Graphics Card: Intel(R) HD Graphics, -293 Mb Hard Drives: C: Total - 476937 MB, Free - 410972 MB; D: Total - 476937 MB, Free - 453231 MB;Motherboard: Dell Inc.,Antivirus: None
My flash drive on windows 7. Says a program is using it. I've tried to see what programs but I don't see anything. Does this happen often or is it just my computer or usb port?
I'm trying to copy an audiobook cd to a blank cd. It ripped to windows media player, but when I tried to burn it to a cd-rw disk I got the message "Windows Media Player could not complete burning because the disc is not compatible with your drive. Try inserting a different kind of recordable media or use a disc that supports a write speed that is compatible with your drive." Is there a different type of disk I should be using?
My son turned on his computer and it stated that he has "corrupt files on the "c" drive and needs to check for consistency". When it checks, an error occurs it says bc of a "recently installed program" and "needs to restore" his computer. It then goes to a black screen with only the mouse visible. He re-started in safe mode and tried to restore and it goes to the original message that he has corrupt file son the "c " drive.
A few months ago after a hard-drive meltdown I purchased a new Hewlett-Packard computer, with Windows 7 HP (64 bit) as the operating system. The tech who installed the computer said I should be fine to back-up to my Phillips 1 GB external hard-drive using the back-up facility provided with Windows 7 HP. I have made a few attempts to do so, all unsuccessful so far. Each time I get a fairly vague 'generic' error message (0x81000001), which does not really provide specific information:
Check your back-up: Windows back-up encountered an internal error. Please review your settings and re-try the operation (It then gives the options of re-trying the back-up or changing the settings). I soon realised after my first failed attempt that my hard-disk space precluded me from backing up a system image, so I configured the back-up facility not to include one- but still the back-ups failed. My hard disk drives are thus:
(C) OS: 207 GB free of 919 GB (D) HP- Recovery (1.45 GB free of 11.9 GB) (G)'Elements' external HD- 1.20 MB of 298 GB (Basically this is an old back-up of my C Drive to an External HD, the capacity of which soon made it woefully inadequate for my back-up needs!) (I) Phillips 1 TB external hard drive (921 GB free of 931 GB)
"windows 7 setup.exe corrupt file the file or directory is corrupt"I'm trying to install 7 32bit OEM Home Premium with the legit bought holographic CD (not a burned image of any kind) onto a Gateway laptop with a brand new hard drive.I was getting this error installing the OS the regular way booting to the cd and installing from it, so instead I copied the contents of the cd to a freshly quick formatted NTFS partition on the new laptop hard drive, then used bootsect and diskpart to setup the disk. It boots just fine and also gets the same error installing straight from the hard drive.
when checking the disk, i got the following message:"windows resource protection found corrupt files but was unable to fix some of them." it mentioned a log that was saved (CBS.log), though i'm not sure what to make of it.what can i do to fix this? i have a lot of data on here that i don't want to lose. the computer does seem to be working mostly ok, but i did just get a BSOD and the above message.this is Windows 7 Pro, 64-bit. and i ran malwarebytes and kaspersky but they came up clean.
My new work computer, running Windows 7 is now unable to install software. I get various error msgs towards the end of installations. Usually some component or dll cannot be found. Aside from this inconvenience my system seems to be running smoothly. Our IT support guys have examined the system and have determined that my registry has become corrupt. They want to take my system and reformat it, and also run some intense hardware diagnostics. This is the second time this has happened in two months. I suspect these guys are just taking the easy option of reformatting rather than actual trouble shooting.
I just built my first computer and was happy to turn it on. When I tried to install Windows 7 I received the error in the title. I had Windows XP on the computer before but formatted it all to two 80GB NFTS partitions. When I try to boot up the Windows 7 recovery disc(or XP for that matter), my moniter goes off, saying no signal(The Windows 7 install disc is the only disc that I've tried that actually boots). I am about to try booting the recovery console off of a USB. Is there anything else that might alleviate this problem? Everything is checked and works fine inside the case.And just to make sure, I have no operating system, so after the BIOS screen the moniter will say no signal anyway, with a disc in or not.
I have a year old "gifted" computer currently running Windows 7 Ultimate OEM.Much of the software on it was transferred over from another standalone XP computer. This represents years of accumulated data.nfortunately, all that old software has come back to haunt me : running slow, if all. And corrupted registry, etc. etc. -- a real mess.If that wasn't enough there was also a bag of malware on the machine. I have spent the last several days cleaning it so the machine will run half decently. So far, so good! No trace of any viruses or malware Along the way I also found out that the OS may be corrupted (as in non-legit) as there appears to be some sort of EULA boot loader (DAZ.Loader?) on it (from the guy who originally set up the computer for me). With that in mind I think it's now best that I repurchase a legit copy of Windows 7 Pro (at least) OEM and reinstall the whole thing properly. But I'm not sure how this new OS will work with the remnants of the other OS still on the computer.As I still want to hang on to our most sacred data that's well integrated on both the OS drive and the larger data drives?
In the case of sfc /scannow CBS.log showing there are corrupt files and the MUI is also corrupt, where do we get hold of clean MUIs and where do we put them when we've found them? I've tried searching on my Win 7 dvd with no luck. It would obviously be preferable to replace the corrupt MUI rather than just the dll or exe, in case corruption happens again. I was under the impression that sfc /scannow would scan the dvd if it couldn't find a clean MUI and replace from there, but maybe not?
i have windows 7 Starter and bought the disk to upgarde it to windows professional, so i put dvd into dvd-unit... duh and after loading two white bars for secondary boot device it displays the hell message "winload is missing or corrupt..." i have already tried EVERYTHING on the forums and on the web including all the bootrec processes, rebuilt bcd, get a new copy of winload switching carpets, and modding BCD file to specify diferent routes for windows to search the file.. and yet nothing...I personally think the problem is that my C: drive it's partitioned in 3 one called system backup (wich is the standar recovery console for vaio, another partition of around 10 gb named System reserved and the free space where windows is located.
Administrador de arranque de Windows ---------------------------------- Identificador {bootmgr} device partition=C: description Windows Boot Manager locale en-us
When I bought the kit and built my new computer last year, I noticed that Windows 7 didn't like being turned off for any period of time over 5 minutes. Anytime longer and it would BSOD on me. Sometimes it gave me a full coded screen, other times notSometimes it would take me to a repair screen, sometimes not. Sometimes it would just boot up (I liked those times best) Every so often, I would have to system restore. It was annoying, but I could not find a fix, and when I did diagnostics on the disk, I was never given any errors on for the Hard drive or anything. Fast forward to a month ago when My monitor up and died on me. I had to send it to be repaired. This meant that I had to turn the hard drive off. I hooked it up today and it decided not to work. I tried system restore and the system repair and they have been useless. I contineu to get the following message upon every boot up now[CODE]
I'm looking into a relative's PC running Windows 7 Home Premium and it's giving me quite a lot of errors.I can't say exactly what the problem is, but several messages/errors led me to believe that a system repair of corrupt/missing files was in order:- Example 1: Control Panel >> Programs >> Turn Windows features on or off: The system could not find the environment option that was entered. Same error comes up when I try to run CMD as Administrator. - Example 2: Opening pictures with Windows' default picture viewer produced an error. This led me to believe that maybe just the picture viewer was corrupt, but then I saw WMP wouldn't run either, and different system options wouldn't work (as in Ex. 1).
I looked around and found that the appropriate files actually did exists, but still wouldn't run for some reason (e.g. WMP, Picture Viewer, etc.)So I decided to run "sfc /scannow" which, at first, just popped up and then immediately closed. Then I tried running it from the Windows 7 installation DVD, via Safe Mode, and via other accounts. In most cases, it said it was starting and that "This will take some time", and a few seconds later "Windows Resource Protection could not perform the requested operation".I also tried "sfc /scannow /offbootdir=c: /offwindir=c:windows" and the same via the installation DVD, in which case I used "sfc /scannow /offbootdir=d: /offwindir=d:windows" instead.I Googled a lot and nothing seems to work. I'd really like to restore this system back into working condition without losing any personal data. Yes, I've already backed it up.
First of all, I apologise if this is the wrong forum, but I don't know where the cause of this problem lies.I have a Windows 7 64 bit PC which until recently was working fine, including burning data DVDs (ebooks, zip files, text files, etc). ABout a week or two back, though, the discs I burnt began to turn out corrupt, with Nero reporting errors when verifying the discs. Whenever I reformat my PC and install the drivers and programs I make a disc image of the C: drive, so that I can reapply this image back to the drive at any point in the future, effectively rolling back the hard drive to the day when I reformatted and reinstalled everthing, so I applied the image to the C: drive, thinking that this would cure whatever file corruption was causing Nero to burn corrupt discs.
This failed to cure the problem, so I assumed that the DVD drive was failing, so I bought a new one, which exhibited the same problem. I tried other software (CDBurnerXP and Ashampoo) and they produced the same corrupted discs (some of the files on the disc had errors, just like with Nero, but the data on the hard drives itself was fine). So I tried burning a virtual disc image from Nero, and it turns out that the disc images Nero makes have the same corruption (which staggered me, as if the problem is purely software then I'd have thought that when I applied the C: drive backup image over the C: drive that would have solved the problem). Someone suggested it might be a rootklit, hiding in the boot block of the drive (I'm not well up on drive fundamentals, can a virus/rootkit hide in the bootblock and escape a C: drive re-imaging?) so I tried Combofix and others, and Combofix detected some 'suspicious' items and deleted them, but the problem still persists.
I tried four seperate Linux boot discs, as that way I could bypass the hard drives totally, so if I got the same error with Linux then I'd know the problem was hardware based, but Ubuntu, Mint, and Mageia all stuck mid-boot, whereas I managed to get Puppy linux to work via it's VESA setting, but the burner software in Puppy Linux (when I'd finally worked out that I had to mount the Windows 7 drive for the data, and how to then find the drive in the file system) just threw up an error - I can't remember what the error was now, I'll post it up when I get home later). I'm a *total* beginner to Linux, so please can anyone help me to get Ubuntu etc to load, so I can burn a DVD using Linux, to see if it's a hardware or software cause of the DVD-R data corruption?
Anyway, I removed all three of my hard drives, inserted an old IDE drive that had never been in a PC before, formatted it, and installed Windows 7 and Nero, and it too produced corrupted virtual disc files, and I'm 99.999% certain that no malware/rootkit could have infect that new (to the PC) hard drive, so I think the problem here is hardware, but I'm not sure.
My Acer laptop is suddenly having this issue and will not boot into windows in any mode including safe mode. I tried using a recovery disc with no luck. I can get to the command prompt from the recovery disc and I tried fixboot and fixmbr with no results.
My computer crashed and then crashed again during the restart. Windows tried the start-up repair, did its self diagnosis and said I have a corrupt ntfs.sys file.How do I fix this? I have looked on the Win7 installation disk but did not find any drivers.
A few weeks ago my computer started acting strange, in that mozilla firefox would freeze a few seconds after I started it. It would usually unfreeze about 10 seconds later, but sometimes it never would and I'd have to restart. I figured I could live with this until last week when the problem got worse and the freezing would last longer (and more often be permanent) and it didn't always require opening of the browser to trigger it anymore.Last week I re-installed windows 7 on a formatted partition, but the problem quickly came back. In fact today it was worse than it's ever been - my computer froze so I had to hold the power button to restart it. After that, I couldn't even start windows without it just hanging on on the loading windows page. I ran windows repair multiple times and kept being told that windows repair couldn't fix the problem. I tried running sfc \scannow but the computer wouldn't let me because it kept saying it had a pending repair and I couldn't get rid of the pending process. Anyway, I re-formatted the partition then re-installed Windows just now, but figure this problem won't go away unless I get to the bottom of it. Obviously a re-install isn't the answer since it didn't work the first time.For full disclosure - I have a 2nd partition and a 2nd hard drive installed on the computer that I did not format when I re-installed windows either time. One is work / program files, while the other is photos and videos. Obviously I can't just delete these, and if I back them up and restore them, any trojan or hijacker hiding in them will just return.Could this be a hardware issue, or does it sound like there's something more malicious here?At this point I've only installed Avast anti-virus and the windows updates. Please let me know if I should run any scans and post back here, as I'd really like to get this issue fixed ASAP so I can use the computer productively again.
