When I bought the kit and built my new computer last year, I noticed that Windows 7 didn't like being turned off for any period of time over 5 minutes. Anytime longer and it would BSOD on me. Sometimes it gave me a full coded screen, other times notSometimes it would take me to a repair screen, sometimes not. Sometimes it would just boot up (I liked those times best) Every so often, I would have to system restore. It was annoying, but I could not find a fix, and when I did diagnostics on the disk, I was never given any errors on for the Hard drive or anything. Fast forward to a month ago when My monitor up and died on me. I had to send it to be repaired. This meant that I had to turn the hard drive off. I hooked it up today and it decided not to work. I tried system restore and the system repair and they have been useless. I contineu to get the following message upon every boot up now[CODE]
I was getting notification bubbles in W7 about many of my .exe files being corrupt, including chrome.exe and a few other programs. The notifications recommended that I run Chkdsk, so I went to the C: properties and chose Disk Cleanup, or whatever Chkdsk is called in the menu, I forget at the moment. Well, when I did that, I got yet another notification, this time saying that Chkdsk.exe is corrupt, and recommending that I run Chkdsk (lol). Well, I apparently chose to schedule Chkdsk to run on next startup. But after I shut down to let it run I booted up and after my Dell screen I get....nothing.
Just a blinking horizontal bar, looks like that little input cursor flipped on its side, in the top left corner. I'm running Ubuntu 11.10 on a USB flash drive at the moment, what can I do from here? Until this happened I've never used a Linux OS before so I'm not very savvy with it yet, but when I view my partitions on here (500GB HDD) I see that 451GB is Unknown, in a partition manager there is a red flag notification saying that I have bad sectors, which I already knew. I've heard a lot about running a program called ntfsprogs, but I can't find it. Is there any way to recover my Windows 7 boot without losing any of my data on there?
When I start my computer I receive a message that says "Windows Boot Manager: The boot selection failed because a required device is inaccessible.: When I try to use the Windows 7 Recovery Disk to repair the computer I get a blue screen of death. I have a reburbished Dell GX620 that currently runs Windows 7 that I believe orginally had Windows XP.
well now ive got this really weird problem that only seems to be affecting windows 7 on my computer...i duel boot between both xp and 7; 7 is what i use most of the time and only really keep xp as back up and the fact that im to lazy to move partitions and files around. but to the problem...when i start up windows 7 as its booting up as far as i can tell it just keeps sucking up my physical memory...once i do get into an account(administrator which has nothing on it) and open task manager(which takes a long time to start up log on and bring it up) i see that my physical memory usage just keeps going up and up untill it evetually uses to much and i cant use my mounse.....then itll keep going untill its completly locked up and i have to use the power button to shut it down...this has been going on for bout a week now...ive tried taken off all hardware(exept video card which is because i have no on board) and tried windows start up repair(which does nothing) and i cant use my disc right now because it wont let me boot into it(gives me i/o error i think my cd drive is dieing....only bout 6 years old now heh) this problem only happens with windows 7 on xp i have no problem i boot up and can leave it going.also sorry for any spelling mistakes but im tired right now and left my glasses in the other room.
It was doing this once before, but this time there is no BSOD. My system is biostar TH55b hd mobo, Asus ATI 5450 HD Graphics, 4 gigs ram, and several hundred gigs oh hd space. The description of the issue is that my pc freezes daily without any specific messages. Wish I could give you a better desription. This is a fresh reinstall of the os. Also there isn't any bluescreen hence there's no dump file, atleast that I know of.
I have an Advent Roma 2001 configured, in PC World style, with a "recovery partition" alongside the system partition and, after resolving a hard disk problem, I found that the machine would not start/boot Windows 7. clearly some necessary files are missing or corrupted, but the normal system recovery tools have not solved the problem(s). I'm familiar with the process for resurrecting XP, but not its counterpart for Windows 7 the files and steps for doing this are rather different. it would seem that pretty much everything else is in place on the hard disk, but certain recovery programs report "0" Windows installations when Win 7 is still in place where it was before the disk problem, e.g. it is available to be selected by the main recovery/startup program...this prog can "see" it, but can't access/boot it.I can breathe some life into this anaesthetised device sooner rather than later...I may as well work my way through the whole lot rather than using a trial and error method that might take a long time.
I have an Advent Roma 2001 configured, in PC World style, with a "recovery partition" alongside the system partition and, after resolving a hard disk problem, I found that the machine would not start/boot Windows 7. clearly some necessary files are missing or corrupted, but the normal system recovery tools have not solved the problem(s). I'm familiar with the process for resurrecting XP, but not its counterpart for Windows 7...the files and steps for doing this are rather different. it would seem that pretty much everything else is in place on the hard disk, but certain recovery programs report "0" Windows installations when Win 7 is still in place where it was before the disk problem, e.g. it is available to be selected by the main recovery/startup program...this prog can "see" it, but can't access/boot it.
files, command line statements, etc. so that I can breathe some life into this anaesthetised device sooner rather than later...I may as well work my way through the whole lot rather than using a trial and error method...that might take a long time. however, I'm also happy to be advised on the approach if and where this unnecessary or inadvisable.
have a Toshiba Satellite A505-S6980 Windows 7 Home Edition Premium Edition laptop. I recently tried to dual boot with Windows XP Professional service pack 3 iso cd. I partitioned my primary windows 7 drive and installed the windows xp on the smaller partition. The windows xp was working fine then I downloaded easybcd and tried to add XP to my OS choices menu, while logged on my XP partition, and then each time I try to load XP from now on I get a blank screen that says Windows could not start because the following file is missing or corrupt: [CODE]
I am trying to fix my girlfriend's computer, which freezes on the windows log-on screen. (I am accessing these forums from my computer.)If I input her password in quickly, then it freezes with "Welcome" in the center of the screen and "Windows 7 Home Premium" at the bottom.If I am slow inputting her password, then it freezes before I get a chance to input the password.After a few minutes, the computer shuts down. When I boot it up, it says something about the computer overheating.I have tried a few things like system repair, etc, but not in any sort of rigorous way (and honestly, I don't remember which ones I have tried so I wouldn't mind starting from scratch, step-by-steph.
It's my daughter's computer. A little e-Machine, 250G HD, Windows 7 32-bit on it. Out of nowhere her computer wouldn't boot up. I can get it to try to boot using the Windows disk, it gets so far, and then the repair fails saying:
The file or directory C:/Boot is corrupt and unreadable. Please run chkdsk utility.
I try to re-install. she had backed up everything on my external just days before. It gets near the end, and then the same error comes up. I cannot get into anything else. Nothing else will load. I don't even know how I can run chkdsk. Unfortunately the computer is about three years old and she can't remember the specifics except there is only one HD in it. She had no internet at her place so it's not because she suddenly installed something. She was using it to watch movies and listen to music mostly. I'm at wits' end, can't figure it out.
Before doing anything what i did was to write zeros on the HDD because i wanted to format completely the hard drive and get rid of any virus infecting the HDD.The problem is not on my DVD, i have used it in the past to fix/format many computers and also tried running the setup from another CD of windows 7 and also a Windows XP one but it freeze on the same point.It looks like this.So if it is not a DVD problem, what could cause it, how do i fix it.The Computer has no OS installed since i wrote zeros on the HDD (FULL DATA ERASE) When i try to do this clean install thing it just freezes on this point after loading the necessary setup files.I tried changing the BOOT SEQUENCE to 1-> CD, 2-> HDD, 3-> Other Removable Devices.I tried disabling the FLOPPY DISK from the Boot Sequence and CMOS (seen this in another thread).I tried other DVD's, not working,
Setup a test PC at work the other for Windows 7 32 Bit and Windows 7 64 Bit (dual boot). Set the dual boot up with EasyBCD. It was working fine until about 20 minutes ago.
I have tried the automatic startup repair but it does not fix the problem. I have also gone through Bootsect.exe and Bootrec.exe commands and they have succesfully written new MBR's and Bootsectors yet the PC still restarts. I have had to /force the previous commands to run.
I have also tried Chkdsk /r but for some reason it just runs through very quickly and finds no errors.
Any ideas as the PC's also have the virtual XP setup.
I was originally dual booting XP and Ubuntu on my main 240gb drive. I decided to give 7 a shot and in doing so wiped my ubuntu install, formatted a nice 50gb ntfs partition for 7 and installed it fine. However now when trying to boot into my "Previous Windows Installation" I'm getting a blank screen. I've tried using the XP recovery console from the disk to restore the bootmgr however chkdsk fails. I think somehow the partition table got rearranged during my install, and 7 didn't fix it for me. I have no idea what to do anymore since 7 won't allow me to change the partition value in my boot.ini file. I have a feeling that's all i need to do. I'm getting "Access is denied" on bootmgr and boot.ini in my XP home folder when accessing from Windows 7..
I have Vista Home Premium 64 Bit and Windows 7 64 Bit. As you see I am dual booting. I had Vista installed first.I installed Win 7 later.Everything was fine.
I installed cuipid a program that monitors,memory,CPU,etc. on Win 7. I used the PC aftyer that for a couple of hours.I shut doem,the next day I booted up went in to Windows 7(set as Default). It was fine.I resarted and arrowed to Vista to boot into Vista.
I got a Black sctreen saying: Windows failed to start. Hardware or software change may be the problem. I went into 7 and restored the system back to before I installed Cuipid,No Luck.
The screen that comes up when I try to boot into Vista says:
1 Insert windows Disk and restart.
2.Choose your choose your language and click next.
3. Click repair your PC./
I tried a repair on Vista and &.
On the page I also get error: File/windows/system/32/Winload exe.
Status: Qxc000000F
then selected entry could not be loaded because the application is missing or corrupt.
I know there is a way to restore the Boot manager from Cmd??
I would appreciate it if anyone could advise me how to restore the Boot Sector.
i get an error boot image currupt and the system will not boot. i tried to run windows 7 dvd repair screen without any success. I changed the boot sequence from hard drive to cd/dvd. The system does not continue after the error.
My laptop advent won't boot. Start up repair wont work, even a system repair cd wont fully load. Only thing i can get to is launch repair your computer, and the only thing that works there is command prompt.
Tried fixboot & fixmbr... They worked but rebuildbcd never finishes.
I was asked by a friend to try and fix her laptop. I don't know any of the history that lead to this problem, So trying to fix this has become a bit difficult.When trying to boot it loads in the BIOS screen what seems like a little too long, and then it will start to load Windows7/Vista (I don't even know what OIS is running, that's how much I don't know about this laptop)(It was just dropped off at my house with a note) and I get the Windows Startup repair screen. After running the startup repair it says that the problem cannot be fixed automatically and in Signature7 of the repair it says CorruptRegistry. I have tried a backup point and there weren't any ever created. I try to run system restore or the Toshiba recovery and nothing happensI am aware that I may have to restore the laptop but I'm not even sure if the person has the disc anymore[CODE]
I've got a hdd with Windows 7 installed that recently wouldn't boot past the startup screen. The drive is showing up in BIOS and I was able to connect the suspect drive to another pc and back up my important data. Now I'm in the process of getting it to boot into windows again but none of the recovery options are working.
Here's what I did: the drive appears fine when plugged into another pc Booted into recovery and ran the Startup Repair several times, each time I'm presented with the same message: "Windows cannot repair this computer automatically". In the Diagnosis & Repair details it doesnt list any errors codes till the bottom which then says: "Boot Manager Missing or Corrupt" Error Code =0x2
Then I tried to run Bootrec.exe but when I typed in bootrec /fixmbr and bootrec /fixboot I got a "The request could not be preformed because of an I/O device error". This message appeared during both bootrec attempts.
I recently got my computer running again after the motherboard had been friend, obviously replacing the old one for new working one of a different model same manufacturer. I have tried starting with a fresh install, but consistently running into errors. Some of which include "Windows could not retrieve information about the disks on this computer." "Boot Configuration is corrupt 0x460" And screen randomly freezing and pixel breaking.
just moved my uncles HDD to a SSD i finally got it to boot no problem andeverything seems to be back to normal but a new issue has come up.every 5th or 6th time i reboot it gives me the BOOTMGR image is corrupt. The system cannot boot error then after i restart go into the BIOS go save to CMOS the system boots as if nothing happened. so far i have tried: run startup repair run bootrec.exe /fixmbr /fixboot and fix bcd commands x4 strangely it says everything is completed but shows 0 indows installs.reinstalled Win 7 no virues no spyware I'm thinking of maybe changing the CMOS battery.
My wife shout down her computer this morning took it on remote location for work today but never booted it up. When she got back home tonight it wouldn't boot up. I don't know what to call these screen but some Startup Repair screen. Just says Repair action: Boot sector repair, Result: Failed.I downloaded and burned to CD the boot CD for the MiniTool Partition Wizard Home Edition but I don't know what disk I am even looking for. I see 3 partitions listed for one disk.The only one with a label is BDEDrive and it's 300 MB. The other two have *: as what I would call a label. One is 297.79 GB and the other is 12.34 MB. The BDEDrive is the only with with status of Active. NTFS on that partition and Other on the big partition.
I was having trouble migrating my OS to a new ssd and received the "Bootmgr is corrupt system can not boot" screen repeatedly after restoring from system image, kept happening so I just decided on a fresh install. Install went well and was fully functional (eg drivers and devices) yet when restarting after installing microsoft office, I got the "Bootmgr is corrupt system cannot boot" appeared and now cannot get the pc past this point no matter how many reboots.
Win 7 (and soon to be Linux and maybe XP) on a second.
I want to be able to take out the primary hd to move it to a NAS unit and just have the second hd in. Problem is, the current bootloader is on the Vista drive. I need to know if there is a way to move this to the Win 7 HD without having to reinstall Win 7 at this time, though I know I will have to when it is released.
I have an Acer Aspire one. It came with XP and I have it dual booting into Windows 7 which is working well which I installed from a USB Drive as this model doesnt have a CD Drive.
In the main boot screen it says "Earlier version of Windows" For XP and "Windows 7" for windows 7. All was working well until yesterday...
Now I can't boot into "Earlier version of Windows" i.e. XP. It gives me the C:\windows\system32\config\system is missing or corrupt message. I can boot into Windows 7 fine but all of my work stuff is on the XP platform (I know I can access the files from "7" but I need to get it operational again).
Any ideas? Can I do a repair from the USB Drive?..I've tried a couple of things to boot from the USB Drive but to no avail. And I can't find the BOOT.INI file from XP (I think it gets moved to Windows 7's hidden boot partition when I installed it. I cant seem to access that partition either).
i hope im posting in the right place. For the past 3 weeks my computer has had me so frustrated i dont know what to do. First off it started off just randomly powering off. Which got worse and worse. So we took it apart and made sure everything was clean and dust free etc. Now its not powering off as much but its freezing. Freezing alot. When it freezes you cant do anything. No cntl alt delete, you cant even move the mouse. Its like complete freeze. Also everytime it freezes when i try to restart the computer it hangs in bios about 5 times until finally after restarting it 5 more times i can make it back into windows. It keeps doing it and i have tried almost everything i can think of. I know its not overheating because i have been checking the tempurture of everything on the computer everyday. Everything is running super cool.
i have recently restored my dell inspiron 1545 to factory settings, but i have started to notice that when i play videos or music the sound stutters or distorts like a kind of glitchy sound every 30 seconds or so. it also happens when i play videos on Internet. this is really starting to get annoying as i play my dj equipment through the laptop.i opened my task manager to look and see if there was any fluctuation on the cpu usage performance, and it seems to spike a little bit high, but nothing drastic, everytime this stuttering happens. could this be a driver problem or something along those lines?
I want to install Windows 7 home premium and got the ISO done with windows 7 usb download tool and unetbootin. When i try booting the USB i get "ntdlr is missing or corrupt press ctrl alt delete to restart"
I swiped the whole HD so there is no current partition on it. The usb is new and fat32 formatted with the 3GB windows 7 iso imgage on it..
"windows 7 setup.exe corrupt file the file or directory is corrupt"I'm trying to install 7 32bit OEM Home Premium with the legit bought holographic CD (not a burned image of any kind) onto a Gateway laptop with a brand new hard drive.I was getting this error installing the OS the regular way booting to the cd and installing from it, so instead I copied the contents of the cd to a freshly quick formatted NTFS partition on the new laptop hard drive, then used bootsect and diskpart to setup the disk. It boots just fine and also gets the same error installing straight from the hard drive.
A few weeks ago my computer started acting strange, in that mozilla firefox would freeze a few seconds after I started it. It would usually unfreeze about 10 seconds later, but sometimes it never would and I'd have to restart. I figured I could live with this until last week when the problem got worse and the freezing would last longer (and more often be permanent) and it didn't always require opening of the browser to trigger it anymore.Last week I re-installed windows 7 on a formatted partition, but the problem quickly came back. In fact today it was worse than it's ever been - my computer froze so I had to hold the power button to restart it. After that, I couldn't even start windows without it just hanging on on the loading windows page. I ran windows repair multiple times and kept being told that windows repair couldn't fix the problem. I tried running sfc \scannow but the computer wouldn't let me because it kept saying it had a pending repair and I couldn't get rid of the pending process. Anyway, I re-formatted the partition then re-installed Windows just now, but figure this problem won't go away unless I get to the bottom of it. Obviously a re-install isn't the answer since it didn't work the first time.For full disclosure - I have a 2nd partition and a 2nd hard drive installed on the computer that I did not format when I re-installed windows either time. One is work / program files, while the other is photos and videos. Obviously I can't just delete these, and if I back them up and restore them, any trojan or hijacker hiding in them will just return.Could this be a hardware issue, or does it sound like there's something more malicious here?At this point I've only installed Avast anti-virus and the windows updates. Please let me know if I should run any scans and post back here, as I'd really like to get this issue fixed ASAP so I can use the computer productively again.
