Computer Rebooted From Bugcheck - DLLs For All Apps Being Loaded
Apr 1, 2012
Running windows 7 ultimate 32bit full retail.
Asus M4A77TD.
Radeon 3850.
AMD Phenom ii black edition.
2 x 2GB Patriot G2 PC3-10666 1333MHz.
Running Windows 7 for about 3-4 months after old motherboard died. System was idle for about 2 hours when screen went blank for about a second, then replaced by bluescreen.
"The computer has rebooted from a bugcheck.
The bugcheck was: 0x000000c2 (0x00000007, 0x0000109b, 0x08060017, 0x87d1d218).
A dump was saved in: C:WindowsMEMORY.DMP.
Report Id: 033112-16177-01."
Got this from event viewer. This has happened a couple of times intermittently, but let it go...til now, not sure if its the same error message, as this is the first time I got BSOD while system idle. Also, have had other erratic behaviour e.g.: while transferring large files to external drive transfer would stop leaving me thinking all done, this would happen when power options set to power down monitor after 30 minutes. Have set monitor to never sleep and problem solved, but maybe worth a mention here. Also, have noticed warning in event viewer, "dll's for all apps being loaded". Using avast free av, and noticed avast real time scanner going crazy with 100%...maybe its scanning all these dll's at that time but again not sure, just maybe worth a mention.
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000f4 (0x0000000000000003, 0xfffffa8007f88800, 0xfffffa8007f88ae0, 0xfffff80002bdd240). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 071012-8112-01.
Windows 7 is freezing. At first I thought that it's random. I made a clean install but the problem was still there. Then I figured, that windows only freezes if I am running utorrent with storage on external WD mybook. Quite weird.
Event wiever says:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 0xfffff80002a10477)
What could be the cause? Driver, application?
I am going to test the memory with memtest just in case.
My pc shutdown unexpectedly and coming blue screen. The computer has rebooted from a bugcheck. The bugcheck was : 0x000000d1 (0x7ec1d0b8, 0x00000002, 0x00000000, 0x8c61c031)
I just looked at my environment PATH setting, and the only thing that's there is the path to UltraEdit.I was trying to install new software from a DVD (setup.exe at the outer layer), and it could not find any of the DLLs that were located in folder on the same DVD.How do I set up Windows 7 Pro 64 so that it will search inside this DVD, at least temporarily?
I'm new to the forum but hopefully can follow all the directions to give you the info you need. Last night I got a blue screen error:The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa80069ff060, 0xfffff800050043d8, 0xfffffa80074245c0). A dump was saved in: C:WindowsMinidump121811-15834-01.dmp. Report Id: 121811-15834-01.
This is the 3rd or 4th time I've gotten this in the last month or two, and it's always happened while the computer was in a Sleep state. When it's occurred I have used the power button on the CPU to shut down. Then I wait awhile and turn it back on and it's fine again. This computer is 4 months old, an HP purchased direct from HP.
My System Info:
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, Intel64 Family 6 Model 42 Stepping 7 Processor Count: 8 RAM: 8172 Mb Graphics Card: NVIDIA GeForce GT 530, -2048 Mb Hard Drives: C: Total - 1419105 MB, Free - 1346316 MB; D: Total - 11590 MB, Free - 1416 MB; Motherboard: PEGATRON CORPORATION, 2AB5 Antivirus: Webroot SecureAnywhere, Updated and Enabled
Note also that I had Norton installed up until a few weeks ago. I have been having Outlook email problems that I thought might be related to Norton, and since I hate Norton anyway I uninstalled it (using their Removal Tool) and installed Webroot SecureAnywhere instead. It is active and updated.
Computer has rebooted a couple of times in the last month. Added details from event viewer and also updated dump files. Critical Error - Event ID 41 Source Kernel-PowerThe system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Would like to get general thoughts on the best way to transfer programs from old computer to my new 8-core Windows Pro 64-bit(new install) computer. One of my areas that I'm concerned with is that several of the programs I'm wanting to transfer were purchased over the internet & downloaded with no physical media involved. Otherwise, I would just do the install via the install cd's
I can only connect to the network using 64 bit applications on Window 7 Pro SP1.The problem occured after installing the latest version of iTunes (may or may not be related). I uninstalled iTunes with no change. IE 32 bit crashes after opening. Firefox opens but gives Server Not Found error. I cannot connect webservers on the local network with Firefox either. Filezilla will not connect to local or remote servers. VNC will not connect to local servers - IE 64 works fine and command line tools like ftp and telnet to internal and external sites works fine - this is not a DNS, Firewall, or Routing issue.
Same results in Safe Mode sfc /scannow runs clean.
I reset the winsock, uninstalled all my network adapters, including the drivers and resinstalled them.Rebooted multiple times.Unfortunately I just discoved that System Restore was not enabled so I can't roll back.I doubt this is malware related as I have multiple levels of defense (postini, SpyShelter, Symantec Endpoint) and outside of iTunes have not downloaded or installed anything or even visited unusual websites. I'm about to do a deep scan that will probably take a few hours just to play it safe.
After I close programs that are still pinned to the task bar, can I install another program where the install wizard recommends closing any programs before continuing?
At this point i knew exactly what had gone wrong and had a major panic attack, i thought i had lost all my precious files, which i had no backup of. Then i remembered when i first got the computer i had to burn something called Acer eRecovery manager to 3 CDs. I then loaded the CD via the Boot Menu, and from there chose to restore my system but still retain user data (rather than restore to factory settings). the 2 and a half hour procedure, i found that all of my documents had been saved. I immedietly rushed to the store and bought a external hard drive and backed up all of my documents.
Now, moving on to the problem. Well it actually a very easy problem to describe. My new computer is now 50x slower than what it used to be, and im not even exaggerating. When i first got the Computer it loaded in 20 seconds, now it takes half an hour. Before this happened, when i used to click on internet explorer it came up instantly, now when i click on it it takes a minute or so. The problem is that i literally just bought this computer, and it cost me alot of money. It worked brilliantly fast when i first got it, now after this my old laptop is even better than it.[CODE]
I have a new computer that runs Windows7 64 bit. I have an older computer hard drive that has XP.I needed something from the old hard drive and hooked it up with the cables from the Windows 7 hard drive and it booted up and ran. I've since gone back to using the Windows 7 hard drive.How do I proceed to add that second hard drive running XP to the new computer so I can have the option of running either OS? I've read through some posts, but they all presume you are installing the OS to new clean hard drives, not have them already installed.Is it as simple as hooking the XP drive into the computer as a second drive and booting it up? Do I need to change some external setting on the hard drive to have it recognized as a slave? Will Windows 7 automatically change the boot to recognize the second OS and allow a choice at startup?
I'm having a very strange problem with my System32 folder. Basically if I move files into System32 I cannot open them while they are in there but once I move them back out I can open them again.For example I am trying to add some .dlls for a java library and they will open with programmers notepad fine on the desktop but as soon as I move them into System32 I get an error saying the files do not exist when I try and open them. But if I copy them back out again they will open fine again. ( A normal text file also has the same problem )I have access to another computer running Windows 7 Ultimate X86 and I didn't have the same issues. I did go through and compare permissions on System32 between the two and I couldn't really see a difference. I'm running Windows 7 Home Premium X64.
Got a BSOD with STOP error C00021a. Unplugged all peripherals except mouse and KB. Ran an sfc scan, but not all file corruptions could be repaired. Looked at the cbs.log. Three entries keep repeating, but I cannot find the files to replace them with the original ones from the CAB folder on the installation disc. ps1xml exists in several places in the Registry. The value is Microsoft.PowerShellXMLData.1.
The �offenders� are as follows:
2010-09-05 23:18:25, Info CSI 000001b6 [SR] Cannot repair member file [l:44{22}]"Registry.format.ps1xml" of Microsoft-Windows-PowerShell, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
I assume I have a trojan which replaced a certain windows core DLL by a modified version.When I list all files in a directory (e.g. C:widnowssystem32) in Windows Explorer then certain files are not visible.Yes, I checked unhide hidden files on unprotect system files in WinExp options.So actually ALL files must be visible which is not the case.Is there a win-explorer-like tool which does not use this faked win
I turned my computer off so it could update. It turned off correctly. The next morning, I turn on my computer, and windows starts, and then configures it's updates. After this windows restarts my computer. When the computer restarted, Windows couldn't start. I tried multiple times, but got nowhere. System restare didn't work, I got errors when trying to restore. (I have tried 2 different restore points.) Startup repair, after a few tries, finally gave me an error. It said:
Root cause found: Bad hard disk: Bugcheck 7a. Parameters = 0xfffff8a001342c00, 0xffffffffc000009c, 0xdda0b8c0, 0xfffff900c0780000.
Every other test ran without errors. This was somehow caused by windows update, because my comp has worked perfectly until windows installed these updates.
The poblems started a few weeks ago when i upgraded the CPU and the GPU. The vendors of the components and the motherboard stayed the same. (E6550 --> E8500 and HD4850 --> HD6850)It had some crashes before but now it got realy bad so i reinstalled the system, updated MB bios, dowloaded drivers from vendor sites, updated everything and only installed basic 3rd party drivers and software.The crashes still remained they happen more often when the computer is under heavy load (3D operations, games running), but they also occur if im playing a video or just use a web browser.I ran memtest, chkdisk but nothing, then furmark and intelliburn but no effect.The remaining drivers came up clean with verifier, and i looked after anything that came up from the crashdumps but my windbg knowledge is limited.
Then when it loads up I get a Windows Error Recovery screen. saying.Windows failed to start. A recent hardware or software change might be the cause.If Windows files have been damaged or configured incorrectly, StartUp Repair can help dianose and fix the problem. If power was interrupted during startup, choose Start Windows Normally.if not etc. choose Launch Start Up Repair ( Recommended )When I choose the first option ( Launch Start up Repair ), what happens is, it first says Windows is loading files.Then it will just turn into a black screen with no cursor and nothing on it.Will stay that way until I force reboot once again.When I choose the second option ( Start Windows Normally ) , when I do this, it moves to the Starting Windows screen that's black with the Microsoft logo, and stays there for a couple minutes until it will eventually Restart itself back to the Windows Error Recovery screen with the 2 options.These are the two issues, and I have no idea how to start up my computer normally again, which is very frustrating b/c most of my work is on this laptop, and not backed up.I'm using a Windows 7, 64bit Laptop.I cannot restart the computer in safe mode.
I received the BSOD twice today. I was just surfing the internet, nothing else. I have up to date virus and spyware and do regular scans. Not sure what the problem is. This is from the event log:The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa800a6bc050, 0xfffff8000472f4d8, 0xfffffa8009a53e10 I uploaded the files per the instructions.
This time the message was DES has been disabled. Enable it or some such nonsense. I have no clue what it means. Luckily I had a PS/2 keyboard to use to hit the ENTER key or my PC would have been disabled again.
When I got back online, every website that uses PWs had to be logged back into. Sites that I never have to log into once I've done it once.
I am installing Windows 7. I deleted all partitions during the install setup and created a new one for Windows to install on (plus the 100MB partition it created itself). The installation seems to go fine until the "completing installation" phase. The computer reboots and the Windows 7 desktop appears but an error window pops up that says "The system unexpectedly rebooted during the installation. The installation can not be completed." It also tells me to restart the installation (which I've done several times with the same result each time).
I know that the system meets (actually exceeds) the minimum requirements. Does anyone have any ideas on how to fix this or what could be causing this problem?
my laptop shut off then rebooted to a blank screen with invalid partition table at the top.It will go to start up screen,and get to bios but other than that nothing.
I have installed a software and environmental variable get updated automatically. But when I re-boot the machine I can't find that environmental variable. I need to add it manually in order to work with it.
I've been experiencing seemingly random crashes and auto-restarts of my computer that started a couple months ago. When it crashes, the video feed to my monitors stops so they go dark and say no signal and any sound that was playing begins stuttering; after about 10 seconds my computer restarts, so apparently there was a bluescreen that I could not see and the delay was windows saving the crash dump.The problem is that the crashes are completely random; well, not completely, they only occur when I'm playing a fullscreen game, never when browsing the web or watching videos. About a month ago I freshly reinstalled windows 7 on a spare hard drive; hoping the problem was somehow related to 'garbage' and a fresh install would fix it. It stopped... for a while, and then started back up again.
I did some googling recently, found that someone with a similar issue had fixed it by upgrading their drivers; did so and found several including mobo inf and related were very out of date. That was about a week ago. When Skyrim was released on the 11th I did a marathon gaming session that lasted about 30 hours (yeah, I know) with zero computer issues whatsoever.Then, yesterday afternoon I started playing Skyrim again.. and it crashed again randomly about 2 hours into my play. Crashed again about an hour later; and then this evening it crashed like 10 minutes into my play session.I don't normally ask for help with computer issues; I've always fixed them myself with assistance from googling stuff and forums that helped me figure out what to do, but this is beyond me.
I built my current system december '08, upgraded the graphics card to the current gtx 570 last december and upgraded my OS from vista to 7 a few months ago. The rest of my system info is in my system profile stuff. Brief version below:
Also, my system runs quite cool; normal cpu idle temps are 84 F and system 120 ish. I've never experienced any graphical corruption either.One other thing I just recalled. Before about november 8th, these crashes used to say they were related to:Event 18 WHEA-logger A fatal hardware error has occurred.
I am running a 3 year old Sony Vaio, Win7 Sp1, home edition and recently it has been shutting down randomly (not restarting) when I am running games (99% of the time I am on the laptop is when I am running games So I cannot say if this shut-down issue will or will not occur if I just kept the system idle). I have never had this problem until a few days ago when I experienced a BSOD (which happened to me before so I thought it was no big deal), and from that point my laptop began to shut down randomly (just crashes, no BSOD), sometimes within a few minutes, sometimes after a few hours of use.
"WhoCrashed" failed to generate any reports (I ran the crash test, it works fine) and after checking my computers event viewer, there was multiple occurrences of the "event 41 Kernel, Windows was rebooted after an unexpected shutdown" critical error. I browsed the internet looking for possible causes of this, and have taken the following actions:
1. Sending in my laptop for repairs (new thermal paste and heatsink cleaning), the core temp when running games tops out around 60-65C which is nowhere near the level needed for a overheat shutdown 2. Testing my GPU temp, (around 50-60C) once again no where near the level needed for overheat (I am running a Nvidia Geforce GT 330M with updated drivers) 3. Multiple Chkdsks 4. Checked system, power, performance, battery etc with Vaio Care 5. Tested it unplugged and plugged on battery 6. Toning down my power plan's maximum processor usage, changing system cooling policy 7. Reinstalling service pack 8. Cleaning out registry with CCleaner 9. Planning on doing a memory test
After all this, the problem still occurs. I am not sure if it is a hardware problem or something else I am probably going to do a repair install on WIN7 to see if that will fix anything.
I have been experiencing shutdown issues for the past 4-5 days now. I click the shutdown option under the start menu, and the screen goes black and the power button is still illuminated. The light had usually gone off, indicating the computer is powered off, but now it's non responsive and I have to hold the power button down to shutdown. Upon further research, I saw a bugcheck on the 20th of Sept 2012, about 4-5 days ago. Has to be related. Furthermore, when the computer goes into hibernate, it becomes non responsive as well, just like the shutdown issue. Of course here is the requested info per the sticky.
I'm running Win 7 Pro 64 bit, FF is primary browser. I have a Verizon FIOS network. I've been getting the following message when I boot up:"The RAS DLL couldn't be loaded. If you don't have a modem installed this is a normal situation. If you use a modem, check that the RASAPI32.DLL is properly installed. Due to this reason, the options related with the modem will not work.This alert can be disabled in the General Options tab." I don't have a modem. Could someone tell me what General Options tab this is referring to so I can disable this alert?
I have a Dell laptop with windows 7 OS 64-bit. The problem is that for the last 2 days i have found it impossible to install anything on it as an error keeps popping up saying MSCORWKS.DLL COULD NOT BE LOADED. I have a lot of important files on my system and i don't want to loose them. how to restoring my system to a previous date say like 2 weeks ago as the system restore only allows me to go back 2 days.
