I'm new to the forum but hopefully can follow all the directions to give you the info you need. Last night I got a blue screen error:The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa80069ff060, 0xfffff800050043d8, 0xfffffa80074245c0). A dump was saved in: C:WindowsMinidump121811-15834-01.dmp. Report Id: 121811-15834-01.
This is the 3rd or 4th time I've gotten this in the last month or two, and it's always happened while the computer was in a Sleep state. When it's occurred I have used the power button on the CPU to shut down. Then I wait awhile and turn it back on and it's fine again. This computer is 4 months old, an HP purchased direct from HP.
My System Info:
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 8172 Mb
Graphics Card: NVIDIA GeForce GT 530, -2048 Mb
Hard Drives: C: Total - 1419105 MB, Free - 1346316 MB; D: Total - 11590 MB, Free - 1416 MB;
Motherboard: PEGATRON CORPORATION, 2AB5
Antivirus: Webroot SecureAnywhere, Updated and Enabled
Note also that I had Norton installed up until a few weeks ago. I have been having Outlook email problems that I thought might be related to Norton, and since I hate Norton anyway I uninstalled it (using their Removal Tool) and installed Webroot SecureAnywhere instead. It is active and updated.
Computer has rebooted a couple of times in the last month. Added details from event viewer and also updated dump files. Critical Error - Event ID 41 Source Kernel-PowerThe system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000f4 (0x0000000000000003, 0xfffffa8007f88800, 0xfffffa8007f88ae0, 0xfffff80002bdd240). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 071012-8112-01.
Windows 7 is freezing. At first I thought that it's random. I made a clean install but the problem was still there. Then I figured, that windows only freezes if I am running utorrent with storage on external WD mybook. Quite weird.
Event wiever says:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 0xfffff80002a10477)
What could be the cause? Driver, application?
I am going to test the memory with memtest just in case.
Running windows 7 ultimate 32bit full retail. Asus M4A77TD. Radeon 3850. AMD Phenom ii black edition. 2 x 2GB Patriot G2 PC3-10666 1333MHz.
Running Windows 7 for about 3-4 months after old motherboard died. System was idle for about 2 hours when screen went blank for about a second, then replaced by bluescreen.
"The computer has rebooted from a bugcheck. The bugcheck was: 0x000000c2 (0x00000007, 0x0000109b, 0x08060017, 0x87d1d218). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 033112-16177-01."
Got this from event viewer. This has happened a couple of times intermittently, but let it go...til now, not sure if its the same error message, as this is the first time I got BSOD while system idle. Also, have had other erratic behaviour e.g.: while transferring large files to external drive transfer would stop leaving me thinking all done, this would happen when power options set to power down monitor after 30 minutes. Have set monitor to never sleep and problem solved, but maybe worth a mention here. Also, have noticed warning in event viewer, "dll's for all apps being loaded". Using avast free av, and noticed avast real time scanner going crazy with 100%...maybe its scanning all these dll's at that time but again not sure, just maybe worth a mention.
My pc shutdown unexpectedly and coming blue screen. The computer has rebooted from a bugcheck. The bugcheck was : 0x000000d1 (0x7ec1d0b8, 0x00000002, 0x00000000, 0x8c61c031)
I recently upgraded my computer ( which is working fine ) and some of my old computer parts would now belong to my brother. When assembling my brothers computer I didn't remove the cpu or RAM once. The only things that were switched from my computer to his were graphics card, PSU, HDD and CD-DVD Driver.Now when starting my brothers computer, it will recognize the cpu and the amount of ram, but after that it stops. It still is answering because if I press DEL or f11, I will acess either bios or boot menu. After that it tells me that the HDD hasn't been recognized. Another weird thing is that it only shows the bios startup screen if the CD-DVD reader is connected, otherwise the computer will start but it will remain full black screen.
So i recently added ram to my computer, this is DDR2 RAM, so i took out 2 old sticks that were 1 gig each and put in two 2 gig sticks. Therefore all 4 of my slots are full and i have 6Gigs in total. When i tried to start up my computer i pressed F1 to save the new memory amount (This amount was indeed correct), and my computer rebooted but then stopped at a disk check. I allowed it to run the disk check for about 10-15 seconds. In this short amount of time it was displaying a bunch of corrupted files and attempting to resolve them i am guessing, but suddenly my computer restarted around 5 times in a row in 5-10 second intervals then i got the error saying: 2233 - HECI error during MEBX execution. ME BIOS Extension Module halted. Update BIOS or ME Firmware if problem persists.I have only found onereference of this on uring-MEBX-execution/td-p/4490533 which seems like it was a faulty motherboard. What i did was i took out the new sticks of RAM and put in the old sticks of RAM and tried my computer again. This time I got all the way to the disk check again and this time i skipped it. Windows started up fine but with some other issues. When i started Google Chrome, it said that my internet explorer.lnk file was corrupted. Also if i tried to reinstall internet explorer, it would fail installation near the end. (by fail i mean i would get a window saying Internet Explorer could not fully install). Next i tried Microsoft excel, and it failed saying i did not have enough memory even though my computer stated i had 6 gigs but 5.7 something usable RAM. I tried word and it instantly "Stopped Working" as windows put it. So i uninstalled microsoft office to try an reinstall it but I rebooted my computer after I uninstalled it.
If chkdsk will not run when you click error check at Computer, what is the command prompt that will do it instead.I am looking for the two replacements only. One is the default with one check at computer and the second is if you were to insert a check at the default at computer.When I surf for this I get too much information rendering it useless to me at my level.
Then when it loads up I get a Windows Error Recovery screen. saying.Windows failed to start. A recent hardware or software change might be the cause.If Windows files have been damaged or configured incorrectly, StartUp Repair can help dianose and fix the problem. If power was interrupted during startup, choose Start Windows Normally.if not etc. choose Launch Start Up Repair ( Recommended )When I choose the first option ( Launch Start up Repair ), what happens is, it first says Windows is loading files.Then it will just turn into a black screen with no cursor and nothing on it.Will stay that way until I force reboot once again.When I choose the second option ( Start Windows Normally ) , when I do this, it moves to the Starting Windows screen that's black with the Microsoft logo, and stays there for a couple minutes until it will eventually Restart itself back to the Windows Error Recovery screen with the 2 options.These are the two issues, and I have no idea how to start up my computer normally again, which is very frustrating b/c most of my work is on this laptop, and not backed up.I'm using a Windows 7, 64bit Laptop.I cannot restart the computer in safe mode.
This time the message was DES has been disabled. Enable it or some such nonsense. I have no clue what it means. Luckily I had a PS/2 keyboard to use to hit the ENTER key or my PC would have been disabled again.
When I got back online, every website that uses PWs had to be logged back into. Sites that I never have to log into once I've done it once.
I am installing Windows 7. I deleted all partitions during the install setup and created a new one for Windows to install on (plus the 100MB partition it created itself). The installation seems to go fine until the "completing installation" phase. The computer reboots and the Windows 7 desktop appears but an error window pops up that says "The system unexpectedly rebooted during the installation. The installation can not be completed." It also tells me to restart the installation (which I've done several times with the same result each time).
I know that the system meets (actually exceeds) the minimum requirements. Does anyone have any ideas on how to fix this or what could be causing this problem?
My computer freezes during a virus scan, defrag, disc check, etc. I have to manually shut down. Does it even in safe mode. Windows7 64 bit. Operates perfect otherwise.
my laptop shut off then rebooted to a blank screen with invalid partition table at the top.It will go to start up screen,and get to bios but other than that nothing.
I have installed a software and environmental variable get updated automatically. But when I re-boot the machine I can't find that environmental variable. I need to add it manually in order to work with it.
I am running a 3 year old Sony Vaio, Win7 Sp1, home edition and recently it has been shutting down randomly (not restarting) when I am running games (99% of the time I am on the laptop is when I am running games So I cannot say if this shut-down issue will or will not occur if I just kept the system idle). I have never had this problem until a few days ago when I experienced a BSOD (which happened to me before so I thought it was no big deal), and from that point my laptop began to shut down randomly (just crashes, no BSOD), sometimes within a few minutes, sometimes after a few hours of use.
"WhoCrashed" failed to generate any reports (I ran the crash test, it works fine) and after checking my computers event viewer, there was multiple occurrences of the "event 41 Kernel, Windows was rebooted after an unexpected shutdown" critical error. I browsed the internet looking for possible causes of this, and have taken the following actions:
1. Sending in my laptop for repairs (new thermal paste and heatsink cleaning), the core temp when running games tops out around 60-65C which is nowhere near the level needed for a overheat shutdown 2. Testing my GPU temp, (around 50-60C) once again no where near the level needed for overheat (I am running a Nvidia Geforce GT 330M with updated drivers) 3. Multiple Chkdsks 4. Checked system, power, performance, battery etc with Vaio Care 5. Tested it unplugged and plugged on battery 6. Toning down my power plan's maximum processor usage, changing system cooling policy 7. Reinstalling service pack 8. Cleaning out registry with CCleaner 9. Planning on doing a memory test
After all this, the problem still occurs. I am not sure if it is a hardware problem or something else I am probably going to do a repair install on WIN7 to see if that will fix anything.
I have a dell lattitude lap top running windows 7. I had picked up a virus that seemed to shake up norton AV. I think I have it settled, but still can not have anyone webex in. Norton did not think this was the virus and suggest I search the OS or whatnot. Before reinstalling Windows 7, is there a program I can run similar to the old scan disk, to check for errors?
I was about to just uninstall most everything, and reinstall it. I am having an issue with a bsod for memory_management. I did a ram check, and a HDD check. Memtest86+ passed 5 times, nearly 6 but I stopped it when I woke up. WDC extended test proved no errors. That leaves me down to drivers.
I have two PCS running WIN 7 that are networked through a switch.I've been having issues with sharing folders & beleive I have it sorted now. But, want to check that the below is correct.I note that I can see folder changes, etc in the home network area and network area of the both PCs. But, I cannot see any changes directly in the C: Drive of each computer.Is this what I should be seeing?
So I try to schedule Disk Check on my C: drive by going to Computer-> Right Click on C: -> go to properties -> Tools -> Error Checking -> Check now ->select both Disk options (1. Automatically Fix file system errors 2. Scan for and attempt recovery of bad sectors). Of course, it tells me that the disk is in use and asks me if I would like to check for disk errors the next time I start my computer. I click yes
I had a "windows explorer has stopped working" the other day. Everything seems to work fine but I thought it might be a good idea to try and scan the system to make sure all is well.
