Can't Select 1440x900 Resolution
Jul 11, 2012
I run a gt200, and windows 7 32 bit pro. One morning, about a week ago, I turned on my computer and I thought it was in low graphics mode. Reseated the GPU and nothing changed. Then I noticed Aero themes was still working and found out my resolution was changed to 1024x768. 1440x900 is the native resolution for my monitor, and when I tried to change it back it wasn't an option under screen resolutions in the control panel. 1440x900 also isn't an option in any of the games that I have tried. First thing I did was restore a windows backup from a few days ago and that didn't do anything, then I tried forcing 1440x900 with the Nvidia control panel and that made it look even worse. Then I tried rolling back my GPU update and rebooting, which didn't do anything either. Right now I run 1280x960, which is alright unless I'm playing a game, then it looks messed up and bother me.
View 17 Replies
ADVERTISEMENT
Nov 26, 2011
i have nvidia 9600gt and HP 1907s.
on the resolution list there is no 1440x900
View 5 Replies
View Related
Jun 2, 2012
I am using an ASUS monitor model ML228, ATI Radeon HD 3300 Graphics, and Windows 7 32-bit. I have used this monitor before at the correct resolution of 1920x1080, but now it is not available to select from the screen resolution manager.
I read through a couple of other threads that said to uninstall and reinstall the driver from device manager for both my graphics card and the monitor and it says both are up to date and nothing changed.
Here is a screen shot of the screen resolution manager: [URL]
View 18 Replies
View Related
Feb 3, 2013
Products:
HP Pavilion a6655f Desktop PC
HP W1907 19-inch Widescreen Flat Panel LCD Monitor
OS: Windows 7 64-bit
Problem: I'm unable to set the native resolution of my monitor to 1440x900. The monitor tries to auto adjust to that resolution, but it always gets set to a non-standard widescreen resolution, which results in poor blurry image.
In the display settings it doesn't list 1440x900 as an option, not even if I go into advance and tell it to list all unsupported.
I've tried numerious Nvidia driver updates and downloading the latest w1907 monitor driver and I'm still not able to set it to the native resolution.
Before going to Windows 7, I even did a factory restore from the recovery drive to stock factory Vista and it still did the same thing even straight from the factory reset.
Is the monitor defective? I hooked another 27 inch monitor up to it and it works fine and shows 1440x900 in the list, but it's almost like the EDID is messed up on the 1907.
I'm concerned by the fact that it was messed up like this even right after the Factory restore.
View 12 Replies
View Related
Jul 1, 2010
i m having this weird problem where, the moment i set my screen resolution to 1440*900 (or anything close to 8:5 ratio), my system crashes, the screen goes blank except 4 a thin white line in the corner and remains this way no matter how many times i reboot. my only option then is to start in safe mode and restore the system to an earlier restore point.
View 9 Replies
View Related
Jan 25, 2012
banging my head with this issue...i have an ati radeon hd 5850 and samsung syncmaster 2233SW monitor....in the games the resolution being displayed is very low, somewhere in the 1280 x 1024 type of regions...though in the game settings its showing 1920 x 1080 .rivers are latest...11.12 amd vision engine control centerbtw my desktop resolution iv put at 1280 x 800 ...wen i put it at 1920 x 1080 in the desktop d sides of the screen get cut...evn my monitors auto adjustment function doesn
View 3 Replies
View Related
Sep 10, 2011
I have Dell Optiplex GX260 system. I intalled Windows 7 Ultimate on that. The resolution of screen is fine but it is not supporting 1280 x 1024 resolution and videos are not playing properly. It was not taking audio drivers as well but when I ran the SoundMax drivers for XP in compatibility mode they were installed. But display drivers are not getting installed. I even tried the various driver from Nvidia for XP/Vista/Win 7, but none of them works.
View 1 Replies
View Related
Oct 20, 2011
I have a new computer with Windows 7. In order to do work online, I keep several tabs open at the same time. The only tab that times out regularly is our access to owa. In addition, my soft phone times out randomly. Everything esle works out fine, regardless of the browser used.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X4 645 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 4
RAM: 5887 Mb
Graphics Card: ATI Radeon HD 4200 , 256 Mb
Hard Drives: C: Total - 942279 MB, Free - 894483 MB; D: Total - 11486 MB, Free - 1403 MB; J: Total - 1430796 MB, Free - 1325120 MB;
Motherboard: FOXCONN, 2AB1 , 1.00,
Antivirus: Norton Business Suite, Updated and Enabled
View 2 Replies
View Related
Mar 16, 2011
when using IE9 i can not sign in or select a value to narrow what you see on this web site. but is does work when i use my firefox and google chrome.
View 14 Replies
View Related
Sep 28, 2012
I recently had to reinstall windows 7 on my laptop as it randomly decided not to boot up. I had a backup of my files saved onto a partition on my laptop but it won't let me restore them for some reason.
I can access the partition from the computer tab and I see the backup there. When I click on it it asks me if I want to 'restore files from this backup', but when accept there are no backups listed.
I originally tried to repair my windows 7 when I had to reinstall it but it came up with a message saying that there were no backups to restore!
View 8 Replies
View Related
Oct 26, 2011
Whenever I downloaded a file in WinXP, a window would come up asking me where I wanted to save the file to. In Windows 7 HP, it just seems to automatically download to the current "users" Download file. How do I configure Windows 7 to work like XP?
View 5 Replies
View Related
Sep 26, 2011
I recently started working with Windows 7 and I haven�t figured out yet how to set a folder to select files to download.When I go to a web form and I want to upload files from my hard drive, in all previous versions of Windows that I worked with, I used to select once the desired folder, pick a file to upload and for all subsequent file uploads, pressing the "Examin" or "Select file" button would take me to the same folder, saving me a lot of mouse clicks if I manually need to upload several files.Since I switched to Windows 7 everytime I want to upload a file, it takes me to the Documents Library and I need to navigate to the desired folder again.
View 6 Replies
View Related
Jul 14, 2009
How to Select a Power Plan in Windows 7 ?
View 0 Replies
View Related
Jun 1, 2011
(Which I what I've started calling this product since I'm on my 5th reinstall and probably will get to a 6th.) Anyway so now I have a new issue this time with Live Messenger. I can double click on a contact and it theoretically creates a window so I can talk to them. The problem is that I can't make that new window be visible. If I hover my mouse over the icon in the task bar I can see that it really did create a window so I can talk to my contact but if I click on it nothing happens. (The window stays hidden.) So anybody else see this behavior with Live Messenger in Reinstall
View 1 Replies
View Related
Jun 17, 2011
Im having a problem installing windows 7 on multiple hard drives and i dont know if its a problem with the hdd's itself or the installation setup. installation works fine on laptops but not on some harddrives i put on my open test bench. (though i have installed it on two harddrives on the same test bench.
the message i get is :
Select driver to be installed
this then has a blank box
a popup comes up:
a requireds cd/dvd is missing. if you have a floppy disc, CD,DVD or flash USB drive, please insert it now.
Note: if you have the windows installation disc inside you can safely remove it now.
View 2 Replies
View Related
Feb 15, 2012
during the installation process, i was asked to select a destination folder where the files will be extracted to.i don't have the slightest idea about what folder to use.
View 2 Replies
View Related
Jul 2, 2012
When I removed old printer, the printer remains in the registry. When I set the new printer as default printer, it doens't keep it. Have not been able to change registry entry.
View 1 Replies
View Related
Jul 26, 2012
a couple of days ago I've started to encounter this problem. My computer will ask me to select an operating system every time I successfully boot - even though I have only one. I have been into the system config and unchecked this option, however the problem still applies. What's more, I occasionally will get a Drive Reading error, forcing me to rebootIn terms of recent hardware changes, all I have done is revert back to an older graphics card due to having an insufficient PSU. I also started using my old Logitech G11 keyboard, but I doubt this will make a difference
View 5 Replies
View Related
Oct 14, 2012
I have been trying to upgrade my windows ultimate from 32 bit to 64 and take advantage of the extra gig of RAM.First of all i have been looking for a clean iso file completetly legal and use the serial from my 32 bit. So far i fou] sp1_64-bit and it is the one im currently trying to use.he main problem is: When i get to the installation menu it asks for the drivers to install. From the guides i have been looking at to reformat and clean install it doesn´t show up or mention such a thing.
View 4 Replies
View Related
Dec 15, 2012
I have spent over 6 hours on my own trying various BIOS settings and what not, but cannot figure this thing out.I used to have an old HP build with "market" RAM and GPU and SSD.
Recently got an eVGA motherboard, and new GPU, and when I install Win7 Pro thru my installation disc, it says 'select the driver to be installed'. So, I put all the eVGA motherboard drivers and SATA drivers on a thumb drive, hooked it up to the back of my computer, tried to install from the drivers available, and then it said that the hardware was not detected on my machine...
Then I tried my wife's Win7 disc, thinking that my disc was corrupted. Same BS. I am so frustrated.I have tried loading my SSD both as IDE and AHCI, and same issue.
point me in the right direction??? I don't mind wiping my drives, I just want to use my damn computer.
mobo: eVGA FTW Z77
cpu: Intel 3770 3.5 GHZ i7
gpu: evGA 2GB 680 GTX
SSDs: Both Intel 840s
PSU: Antec 750 earth watts
ram: 16GB DDR3 1333mhz (4 x 4) 9-9-9-24
Oh, and, EVGA was useless when I called their support team. So was Microsoft.
View 8 Replies
View Related
Jun 15, 2012
I have a laptop that I have set-up with 3 OS's; windows 7 (to use), windows 8 (to learn), and Linux (to do everything else). The other day I noticed a few issues and decided I needed to remove windows 8 and Ubuntu in order to prevent a system crash (kinda ironic once you read the whole thing). When I installed Ubuntu and windows 8, I created a 45gb partition for them. Not a big deal. The problem is when I removed ubuntu/windows 8 and their partition, I forgot to set something with the windows 7 partition so it was the main boot partition. Now its trying to boot from a partition on the hard disk that doesn't exist. I know for a fact that the windows partition is completely functional and intact. It's a rookie mistake and I make no excuses. At this point I'm 90% sure I need to reinstall windows 7, which I can easily do as I have restore disks and multiple back-ups. I was just curious if there is a way to change this either through BIOS or using a USB/SATA cable to externally boot and access Windows 7 system files.
View 2 Replies
View Related
Oct 16, 2011
I recently had to force shut down my Asus g73jh laptop because it was being extremely slow. Now when I turn it on it tells me to "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key" I don't have the windows 7 repair cd.
View 9 Replies
View Related
Mar 3, 2010
I've got a computer with Windows 7 Home Premium. There are two users, but I want that the computers always starts with the same user (no password) and not to show the user select screen.
View 2 Replies
View Related
Feb 19, 2011
In windows 7 in windows explorer we can search and control our files and folders.When I click on a folder or file I get a nice light blue selection. I am really sick of this color. I do not wish to change the Windows 7 Theme per se , I was just wanting to change the color of selected files and or folders , because the color is too faint.
View 1 Replies
View Related
Feb 23, 2012
I have, today, installed Win 7 on a new computer. I have been using XP until now. I have googled and searched through the forum for an answer to this problem but can't find anything. Either I am the only one that has it, or I am the only one that it bothers
Scenario:
I have a folder with 200 audio files of various formats. I want to select only the .OGG files whose filenames start with "A".
On XP:
I would sort by filename, select all the "A" files, re-sort by file type, using CTRL and the mouse, I would then deselect non-OGG files.
When I try this on Win 7 my selections are cleared when I re-sort.s there a setting somewhere that I need to change?
View 3 Replies
View Related
Dec 16, 2012
When I select anything on the desktop or in folders it is XP style or Grey on the outside.
View 4 Replies
View Related
Feb 14, 2012
I would like to use a specific driver but when I don't have my eGPU connected the driver causes BSODs. Is it possible to have to bootup options one with the driver loaded and one without. I googled about that a lot but I wouldn't find anything. I even willing to upgrade to windows 7 Ultimate if it won't work on Home Premium
View 2 Replies
View Related
Dec 19, 2011
As opposed to just the hard disk that the partition is on? For example, would I be able to create a small partition on my C drive then go into the BIOS and set it as my primary boot device?
View 8 Replies
View Related
Jul 2, 2010
when ever I click or select a icon a tick shows in the top right corner how do i disable this.
View 1 Replies
View Related
May 9, 2011
I want upgrade my PC some parts including "Processor,VGA etc" so i want select most suitable parts. So are there're any special utility software for that?
View 1 Replies
View Related
Jun 27, 2011
I have 3 computers with Windows 7 Pro.
I can use remote control between 2 of them, but I can not connect from any of those two to the third one. All the services needed for remote control are running, and I have tried several tutorials on how to set up remote control...and nothing. Again, only on third computer remote control does not work. On that computer I have 2 accounts: one standard and one admin. I have put admin account under "Select users" and did not help. Tried with enabled Administrator account and nothing. Below you will see the picture which describes the problem. I can not select who can connect.
View 3 Replies
View Related
