heres the setup: nfts hd on mac os x lion with read write drivers installed for the nfts format workgroup name on both windows and mac is the same"WORKGROUP" both are on same local network shared on mac using smb and with username and password in mac database that was entered on windows 7 to gain access to majority of shared components
i was able to access all of the mac hd which was actually kinda scary, and i was able to even access a external backup drive.
when i try to click on any of the shared folders as well as the whole drive shared on the network from my mac i get an error saying "Windows can not access \computers name\(folder/drive) check the spelling of the name. otherwise there might be a problem with your network" error code:0x80070035 the network path was not found. its a 3 tb hd and i would prefer not to format it becuase 2 tbs have been used and i would prefer not to have to transfer it to variosu other devices and then back
I have a Maxtor External Hard drive and Windows 7 Premium 64 bit. I have a user setup for each member of my family on the computer. The maxtor drive was working fine uptil I decided that I wanted only myself to be able to access it only. The drive appeared as my K drive. I went to sharing and added myself as read/write access and removed the everyone share thinking that only I would be able to use the drive. I restarted my PC and now nobody can access it. When I plug the drive into the usb slot the drive whirs up as normal but there is no drive letter for it and it does not appear in device manager etc. I plugged it into my old XP machine and that cannot read it either..
I have been trying to connect to my 4 tb harddrive through the network, but windows only finds it as a media device, not a harddrive, so i cant access non media files on it!
I'm having a hell of a time trying to connect to my shared folders on my Win 7 RC machine from my XP machine. I have my shared folder permissions set to 'full control' for 'everyone'.On my XP machine I click to open my win 7 machine from the workgroup and I get the username/password screen. The username is already filled in like this: WIN7PCjohn. I type my win 7 password for john user account and I get an error that says: \win7pc not accesible. You might not have permission to use this network resource ... multiple connections to a server by same user ... etc.
I just upgraded all of my computers to Windows 7 Professional and Office 2010 Professional Plus, and they're all running great. Much faster than the previous configuration, Windows XP Professional SP3 w/Office 2003 Standard. I'm using one computer to store all of the file backups and share the printer, a Dell Photo AIO 924. Everything's working fine, except for the printer. The printer prints from the computer its directly connected to, and I have it shared. However, when I try to connect other computers to it, I get an unable to connect to printer error with code 0x06. I checked a couple of things, Print Spooler service is running, network passwords are disabled, and all computers are in the same workgroup. I've gotten this to work before, but that was a while ago when I was running Windows 7 Enterprise trial on the same computer, everything worked great
I made a few months back a backup of my machine(windows 7 64bit edition). The size was like 25gb's so I saved it on my external hard-drive(I bought a case and put a hard drive(Seagate I think) in it). I know want to use this to restore my computer. So I made a system repair disk and loaded it up. However it cannot find my external hard-drive. I have "WindowsImageBackup " in my root directory of my external drive. Yet it still does not see it. I would install some drivers but I have no clue what drives I need as when I plug it into my computer and I am in windows 7 it finds my drive. What do I need to make window 7 recognize my image?
I've got two Vista Ultimate computers. Both have the same username and password. Same workgroup name.
Password protected sharing is enabled on both. I shared a folder on computer 1, and added Everyone to the security tab, with full control.
When i try to map the folder from computer 2, I can see computer 1 listed. But when I click on the + next to it, it asks for a username and password (which I did not expect to be necessary since they are both the same user account and password) and when I enter it it says Logon Unsuccessful.
so i'm having an issue trying to connect to the shared printer on one of my windows 7 x64 machines.i've tried setting the network on windows 7 to "work network" instead of "home network" thinking that the workgroup being the same on all systems will do the trick but it doesn't.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
In a small office (about 50 staff members) we have a shared drive on Windows Server 2008 R2. The file server is virtual machine on Hyper-V. The shared drive is mapped to every users account.And the data on that drive gets more and more.And now my goal is to organize a search on that drive. So how can I do that? Will Google Desktop installed in every user�s computer solve the problem?Or is there any other (better) ways to search on shared drive?
i have a samsung galaxy ace. my laptop is accessing internet through wifi from my friend's building. So can i access internet in my samsung galaxy through wifi from my laptop? if yes..how?
Me and a friend were testing if Windows 7 Home Premium could host a shared Drive. It was able to easily, but now I cant get rid of the Shared Drive that was created. I went in and selected to no not share the drive and yet it wont disappear under the network locations category in windows explorer. How do I get rid of this Shared drive.
I have just created a VHD on my laptop so I can share is as a shared area as I have over 5 computers in my house. I want the whole household to have access to the drive but not to a folder that i own as it contains private stuff. How would I go about protecting a folder from being accessed without the correct password and username. Or maybe, how would i go about stopping the folder from being accessed from the whole network but being able to access it on the local machine?
I recently replaced a Freeagent Pro with a Goflex Desk. Both the new and old drives were permanently assigned drive letter H and the new drive fitted in seamlessly about a week ago. The old drive is not used My Synctoy backups (run via Task Scheduler) all worked fine daily from 28th July until today when H was not found.I checked the properties and sharing was unchecked (not by any human hand!)The drive is permanently attached via USB.
We have a company drive that we map folders from to certain computers. They reconnected at log in like normal. However, we have a separate external drive that when I map a folder from it, it never reconnects on log in. I have set the folder permissions for the user I want. I have tried directly connecting with the folder share name and also using the IP address of the server. They will initially connect when you set it up at first, but then it never reconnects to the drive/folder when logging back on. I have tried almost everything I can find and it still never seems to connect.
I have two computeres set up in an offline LAN with a 4 port switch connected to a router. One is a server with 4 shared 1TB drives. The other is just a works station. Both computers are running windows 7 ultimate x64. My problem is that 1 drive which I've label as Z: keeps disconnecting in the workstation. When I check the server I noticed that the Z drive has been marked as un shared. So I re enable sharing and set the desired permission. Then I re map the drive on the workstation. A few days later and the same issue happens. Both computers are always left on and I've set the power options accordingly.
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
I have a Gigabyte 870-UD3 motherboard and I also have two hard drives, One is a TB and the other is 500GBs, The TB one is the primary one at the minute and I was wondering does it matter what way my hard drives are connected to the motherboard? Will one slot make it slower or faster?
I have a system with 3 drives disk0, disk1, and disk2.What I'd ultimately like to do is install Windows 7 on disk0 and install Linux on disk1. Then I want to have disk2 split into 2 partitions(part0, part1) for programs and other misc install files.However I don't want disk1 and disk2part1 to be visible while using disk0 and disk2part0 and vice versa.Is there any way to make this possible?
I bought a 2TB external hard drive (Western Digital) earlier this year on sale and for Christmas I got another one for redundancy (a back-up in case the one I have fails). My problem is that while my computer (a Dell Desktop purchased last year) will get a bit glitchy in picking up one (sometimes it won't recognize it but this is seldom), it will never recognize both at the same time. As a result, I have to add files (pictures, music, etc) to my external hard drives one at a time. I've checked all the USB ports with other hardware, and they all work - the only thing I can think of is that this is a Windows issue. I have both external hard drives assigned to different drive paths, so it's not a matter of that.
