I have window 7 in 1st hdd, installed centos6 in 2nd sata hdd (note, I disconnected data cable before installing centos from mother board)After completion of installation centos, I reconnected the data cable to the 1st hdd and reboot and I didn't see the option for booting to windows at all.
View 2 RepliesI am new to dual boot and centos, how to set up a dual boot?
my machine: MSI U135dx wind netbook my current OS: Windows7 my Plan: dual boot windows 7 with centos(Linux)
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies View RelatedI installed a new motherboard for my Windows 7 Home Premium system and was surprised to find Windows won't boot now. I tried repair option from the install disc but didn tried the in place upgrade but after selecting the Install now option I end up with a message that the system was booted from the install disc and I need to start Windows normally and then insert the install disc again which of course won't work when Windows can't boot.I made a new install on a test hard drive to check my motherboard and it is working fine. What can I do? I would like to boot on my regular drive with all my data and programs and not have to go through the long process of finding and installing everything anew.
View 7 Replies View RelatedSo long story short, my current os (w7) is installed on a non-boot partition of a now internal drive that used to be external. This wasn't an issue/I didn't notice because I had another unused internal hdd which DID have an old bootable os partition, and then I'd just choose the correct instance of Windows when that one booted.I have to get rid of the old HDD with the bootable partition. Is there anyway I can change the non bootable my currant OS is on to a bootable partition (ie thru windows, cmd, bios etc)
View 7 Replies View RelatedI installed windows seven and it boots up automatically without giving me the option to boot into my old vista partition.
Background:
I am sure this is something simple, but I can't get it working.
I had vista installed and I used partition magic to repartition my hard drive on my laptop.
I made the new partition come before my old partition, because I wanted windows 7 to be my primary eventually.
I think it may have someting to do with making the vista partition active, but I am notentirely sure how to do that.
My installation was FAILED!!! i have windows xp 32 bit pre-installed (in C drive), I was trying to install DUAL BOOT xp with Windows 7 (in D drive NTFS) using ISO image file of Windows 7 64bit ultimate (present in my HHD), i mounted the ISO file of windows 7.The installation started normally but in the FINAL step (Finalizing installation) when system restarts to perform configuration etc, but instead of that i got message "Failed to install windows and rolling back changes".mportant NOTE: Using virtual dvd rom, i mounted and install Windows 7 "32 bit" all right!!! There was NO problem at all of dual booting windows xp 32 bit and windows 7 32 bit on the same hard disk (on different drives)so my question is Windows 7 64 bit cant be dual boot with pre loaded Xp 32 bit ??? or tell me how to do it please..i got 4 gb ddr2 ram and i want to run 64 bit OS windows 7 to utilize it maximum.My system info;Dell OptiPlex GX620 2.8 ghz, 4 gb ram, ATI 4350HD-512 mb Hard disk space on D Drive is 25GB
View 5 Replies View RelatedI have a custom built system. windows 7 installed but it will not start up in this system. A friend put the hard drive into his system and Windows started up fine on his. I ran the memory check on windows and it never said that there were problems but you have to be able to get into windows to see the report so i can't be totally sure. The motherboard was sent back and checked by the mfg. and i doubt that the processor could be bad if it was able to install windows 7 onto the hard drive.
View 9 Replies View Relatedhow to create bootable dvd from insatalled window 7 from my pc
View 1 Replies View RelatedI recently installed a new SSD and put my OS on it but every now and then when I boot up it just wont get an internet connection.Once its booted up and I restart Windows though its fine.It doesn't happen everytime but 50% or so I'd say on boot up.I'm thinking its something to do with how fast its booting up now and for some reason my network settings or drivers have not had a chance to load or something and its not getting a handshake with my router.
View 4 Replies View RelatedMy system was working fine last week until I've installed an additional SATA HDD, windows will boot up until the windows 7 logo after that its all black screen, I've waited for hours for some response to happen but nothing happened, I've reformatted it a few times with the same outcome. I've tried resetting CMOS a lot of times but to no avail. But this evening I tried taking out my Graphics card and other peripherals and then windows boot! it boots with all other accesories(wifi card,firewire etc.) and the new HDD but when I try to reinstall the Graphics card it goes back to a black screen after the windows 7 logo!! is it a case of a busted video card? if so then why does it have display? I also checked the back of the Graphics card's heatsink and it has this white paste-like goo that has hardened, should i clean it and apply new thermal paste?
View 14 Replies View RelatedI had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.These are my curent booting settings:There are a total of 3 entries listed in the bootloader.
Default: Windows 7
Timeout: 15 seconds
Boot Drive: C:
Entry #1
Name: Versi�n anterior de Windows
BCD ID: {ntldr}
[code]....
I tried also copying a regular boot.ini file (see below) into the Server 2003 partition, but all I got with this is, instead a black screen, a message saying that system in " NSTeasyldr1" cannot be loaded by some hardware/software error (no more options but to go back)
Code: [boot loader]
timeout=5
default=multi(0)disk(0)rdisk(0)partition(1)WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Windows Server 2003, Enterprise" /noexecute=optout /fastdetect As said, I am totally desperated with this, I really need my server 2003 getting launched
I recently bought a new hard drive with windows 7 home premium 32 bit installed. When tried to install it in my pc it would not boot up, I am assuming its because everything is new to it. I bought a windows 7 recovery disc but it has not worked. I did not get an install disc with the new hard drive.
View 5 Replies View RelatedI had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.
First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.These are my curent booting settings:
Quote: There are a total of 3 entries listed in the bootloader.
Default: Windows 7
Timeout: 15 seconds
Boot Drive: C:
[code]....
i am using windows 7 ultimate 32 bit, and when i install windows xp to install some software that is not compatible with windows 7, after i finish installing xp., the boot screen not showing options either ro boot windows 7 or xp, it just goes booting windows xp
View 2 Replies View RelatedNow, I've installed Win 7 (Professional) on the same as XP is installed. When I try to boot from HDD, I only get the XP entries, but can only boot Windows 7 through.
View 2 Replies View RelatedI have a computer with two (IDE ribbon cable) hard drives. One had a bad windows XP installation on it. I installed Windows 7 on the other. I formatted the drive before installing Windows 7.Then, I decided I want to use the hard drive with the bad winXP installation on it, in another computer (I will format it). When I opened the computer side panel, I wasn't sure which hard drive was which, so I unplugged the power to one, and started the computer.The thing is, it won't boot Windows 7 with either of those hard drives alone, only when both are plugged in. With HD #1 disconnected, it says "Can't find BOOTMGR, press a key to reboot." With HD #2 connected, I get asked whether I want Windows 7 or an older OS, and when I choose Windows 7, I get an error message, something like "Windows 7 failed to start. To try and repair, insert install disc, or use recovery mode, etc" With both HDs, I get asked the same question, "Windows 7 or an older OS," but when I choose Windows 7, it works. In my computer, I have verified that Windows 7's files are on one disk, and corrupt winXP files on the other.
View 8 Replies View RelatedI really need to get my Server 2003 running, as that is working platform (need it for my job).I had three operating systems in my computer: Ubunt, Win XP and Win Server 2003. Grub was the booting program, that offers you go to Windows loader. When I selected this, I could choose between XP and Server 2003, according to XP boot.ini file.Yesterday I got Windows 7 installed over XP. Everything seemed to be fine. I got back Grub booting with Super Grub. When I boot the computer I choose Windows booting, and now, Windows 7 menu is shown.First options here were:
- Previous Windows version
- Windows7
Firtst entry did not work: when you select it the computer just hungs up doing nothing, showing nothing, totally black.I installed EasyBCD and tried to edit boot menu: adding new entry to be autodetected or selecting the drive, but I get just absolutely nothing. When I choose this new entry to be loaded, same result: black screen.
I recently built a new machine. I installed Windows to my drive, a 1TB Western Digital. Installed worked fine, but at thestage 'preparing your desktop', it just says 'shutting down' then 'logging off', and then starts rebooting up to the point where it would load the OS, then reboots again.What gives? I tried re-installing the OS, same exact thing happened.
View 10 Replies View RelatedI installed xp pro sp3 on my dell inspiron 1545 on a seperate partition of the same hard drive windows 7 is already installed on. Now the computer will only boot into xp there is no bootmanger screen to choose from.
View 7 Replies View RelatedI recently got a new ssd and installed Windows 7 on it (I used the oem code on the bottom of my laptop [Lenovo Y580] along with the iso from digitalriver). It's been... well, as good as you can expect windows to be up until yesterday. When I booted the laptop into Windows, I had no internet despite having an ethernet cable connected. I checked to make sure it wasn't just my router. Sure enough, wifi and ethernet work perfectly in Ubuntu. I went into windows again and checked if I had the latest drivers. I did, so I tried reinstalling them and everything worked fine. Until I restarted. Every single time I restart I need to reinstall my wifi and ethernet drivers. It takes seconds, but it's still annoying and shouldn't be happening.
View 1 Replies View RelatedMy concern is only to make Desktop dual bootable where Winodws 7 is already installed and I want also install RedHat 5 Linux. I want to know what settings in BIOS are required to be changed or what is the proper procedures to do so.
View 1 Replies View RelatedI have a Machine with the Following Config:
Intel E2180 CPU
2GB Ram
Gigabyte GA-G31M-S2C Mainboard
Seagate ST31000340NS SATA Hard Drive Connected on SATA0
Operating Systems:
Windows 7 Ultimate 64Bit on HDD
Windows 7 Ultimate 32Bit Booting from VHD
I Installed Windows 7 Ultimate 64Bit onto Hard Drive as Per Normal Installation Onto the Hard Drive and Installation created 2 Partitions (1 System PArt and Another for C: Drive) Everything Works Great.m I Then Installed Windows 7 Ultimate 32bit Into a VHD. Setup Created a Multiple Boot Entry into the BCD so that when I Boot it Prompt Which OS I Want, I then Used BCDEdit to Change the Descriptions of the Boot Options "Windows 7 Ultimate - 64Bit - HOST" and "Windows 7 Ultimate - 32Bit - VHD" Everything still works Great.. No Problems.. Been Like this for a While Now and Perfect.
Now the Problem is that I Need to get some Data From and Old SATA Drive. I Shutdown .. Plugin the WD1600AAJS (160GB) into Another SATA Port (SATA1).. Turn Machine on and Press Delete to Enter Setup for Bios.. Goto Set Boot Device Priority and Ensure that the ST1000340NS Drive is at the Top (1st Priority).. Exit and Save Settings.. PC Goes through POST and Then Will not Boot.. it Gives "Missing Operating System" Shutdown Remove WD1600AAJS Drive.. Boots Perfect.. Reattach WD 1600AAJS Drive and "Missing Operating System" Tried Using "F12 to Select Boot Option" during POST to Select Boot Device.. Choose ST1000340NS ... and Still same Issue.. Remove the WD1600AAJS and Boots No Prob Off the ST1000340NS.
I thought that maybe it was the WD Drive.. so Tried another Seagate Drive.. and Same Issue..
I have set Every Available Option on The Bios to Choose the Boot Device and NOTHING Works.. I have Even swapped HArd drive SATA Ports .. still no Difference.
I have an Idea there is a problem with the BCD but I Cannot Edit or Add any thing to the BCD as it will not boot with the second drive attached. And When you edit the BCD it need the second drive attached to be able to Add a BCD Entry.
My installs of Windows 7 was working fine and all of a sudden it wont boot anymore. Yesterday I put in a required Java Program update install and I think Windows just added a couple of critical updates as well. I have tried booting in every way possible, rolling back, safe mode, etc, and nothing works.
I keep getting the screen telling me there is a problem and must do a system repair. Then the repairs and all it wants to do is shut down. I managed to pull up some error reports and it seems two files are corrupt which are TCPIP.SYS and one called FWPKCLNT.SYS.
TCPIP.SYS is located in C:/WIndows/System32/Drivers
FWPKCLNT.SYS seems to be in drive F:/ which is not an actual drive. It must be a temporary boot drive created by Windows 7.
I have an older XP on another partition on the same hard drive so I booted in XP to see if I could possibly delete the reported corrupt TCPIP.SYS file and replace it from another Windows 7 install from my laptop just to see if that might work. But it wont let me delete the TCPIP.SYS file. It says it is in use, but I can't understand that since I am trying to delete it from the Windows 7 partition while I am booted up from the XP boot partition.
A couple of months ago I was working on a logo design in Adobe Illustrator CS5 (I'm a graphic designer) when the power in my town cut out for a moment. It shut the computer down, and since then I noticed that it takes quite a long time for the machine to boot up... 5 or more minutes.
Also since then, every time I buy and install a new font it does not keep the font installed. I have to continuously reinstall them. Anything installed prior to that day is fine, but new fonts since then just won't stay put.
I'm using a Dell Studio XPS with Windows 7 Pro.
Asus cm5570-ap006 originally running vista premium and owner wanted an upgrade to seven. Bought a new hard drive b/c old one died. Mobo had trouble finding new drive but, after setting bios back to default(F5) it installed and finally got working.Owner gets pc and starts getting blue screening and saying theres an f1 drive error and wont wake up after suspending without reboot.So I get it running fine by removing avg(which is causing blue screen for some reason) and the it is now waking up after auto hibernation. But if you put into hibernation manually it wont wake. I update windows and it goes back to not recognising hard drive.Flash bios remove cmos baterry reset bios to default and set hard drive to ahcpi and it reinstalls fine update windows and it stops working. Use restore point to get it back and running and this time dont update windows and its running ok again. Shut it down for the night and the next day go to boot it up and there is no bootable media and now I am trying to reinstall Windows 7 and after it does it gets a no bootable media error even though it is
View 3 Replies View RelatedI have Window XP installed on Drive C:. My son installed Windows 7 on Drive E:. However, when the computer is booted up, it boots up in Windows 7, without allowing a choice. I suspect this can be corrected in BIOS, but don't want to screw it up.
View 5 Replies View RelatedIm using a Amd 6950 2gb. Anyways so i noticed after reinstalling windows that it would hang after the first set of program and driver installs (Anti virus, ccleaner, google chrome, etc etc.) And so I started to figure out where the problem was. Found out that windows will start when I uninstall the graphics drivers. Ive tried hotfixes old drivers.
View 1 Replies View RelatedFirst, the information as it is. I had a hard drive issue that I'm working on currently, trying to recover I suppose what is a crashed hard drive. There are tons of errors on it, but that's not the question I have right at the moment, but some background.
I have tried to reinstall Windows on a brand new 2.5" Seagate 500GB 7200rpm HDD. I formatted the drive using the windows 7 ultimate installer and booted it using a USB booter made from the windows 7 download tool.
When I booted it up and tried to get it going, it gave me a hardware error saying "Windows wasn't able to configure the hardware and try startup repair" or something to that effect. I read around and it said that since my BIOS says the HD is in raid configuration that it needed some Intel Raid driver, which I installed and tried running, but it didn't seem to work. It says now "windows cannot repair this computer automatically". The problem signature is as follows:
Problem Event Name StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
[Code].....
Primary HDD in the BIOS is recognized as 500GB RAID is On as well. Trying to install Windows 7 Ultimate 64 bit.
My existing PC has Win XP. I have a hdd which has a windows 7 install already from where it was previously connected. Can I now dual boot windows 7 and Windows XP?
the new hdd is detected but the os is not detected in the boot loader.
I decided to Dual boot Hackintosh (iDeneb) and Windows 7 on my HP laptop. I got OS X up and running and I can't seem to repair my Windows 7. The installation disk can't find and fix the problem automatically, so I went to Command line prompt and when I type it Bootrec.exe/scanOS is says that it can't find any installed windows on the disks. I am 100% sure I did not over write my windows partition with the OS X and honestly, I have no idea how to get Windows running again without having to install from scratch.
View 5 Replies View Related