Dual Boot Hakintosh - Cannot Find Installed Windows 7 On Disks
Mar 27, 2011
I decided to Dual boot Hackintosh (iDeneb) and Windows 7 on my HP laptop. I got OS X up and running and I can't seem to repair my Windows 7. The installation disk can't find and fix the problem automatically, so I went to Command line prompt and when I type it Bootrec.exe/scanOS is says that it can't find any installed windows on the disks. I am 100% sure I did not over write my windows partition with the OS X and honestly, I have no idea how to get Windows running again without having to install from scratch.
My installation was FAILED!!! i have windows xp 32 bit pre-installed (in C drive), I was trying to install DUAL BOOT xp with Windows 7 (in D drive NTFS) using ISO image file of Windows 7 64bit ultimate (present in my HHD), i mounted the ISO file of windows 7.The installation started normally but in the FINAL step (Finalizing installation) when system restarts to perform configuration etc, but instead of that i got message "Failed to install windows and rolling back changes".mportant NOTE: Using virtual dvd rom, i mounted and install Windows 7 "32 bit" all right!!! There was NO problem at all of dual booting windows xp 32 bit and windows 7 32 bit on the same hard disk (on different drives)so my question is Windows 7 64 bit cant be dual boot with pre loaded Xp 32 bit ??? or tell me how to do it please..i got 4 gb ddr2 ram and i want to run 64 bit OS windows 7 to utilize it maximum.My system info;Dell OptiPlex GX620 2.8 ghz, 4 gb ram, ATI 4350HD-512 mb Hard disk space on D Drive is 25GB
I installed xp pro sp3 on my dell inspiron 1545 on a seperate partition of the same hard drive windows 7 is already installed on. Now the computer will only boot into xp there is no bootmanger screen to choose from.
My concern is only to make Desktop dual bootable where Winodws 7 is already installed and I want also install RedHat 5 Linux. I want to know what settings in BIOS are required to be changed or what is the proper procedures to do so.
I have Window XP installed on Drive C:. My son installed Windows 7 on Drive E:. However, when the computer is booted up, it boots up in Windows 7, without allowing a choice. I suspect this can be corrected in BIOS, but don't want to screw it up.
My existing PC has Win XP. I have a hdd which has a windows 7 install already from where it was previously connected. Can I now dual boot windows 7 and Windows XP? the new hdd is detected but the os is not detected in the boot loader.
Is this possible? I do not have a windows 7 cd, is this necessary? What version of Snow leopard do I need, and what other programs? If you know of a good tutorial, please post it! I'm new to partitions and bios and stuff.
how do find the bootpath for windows 7 which was my old OS from recently installed windows XP OS.Since i have installed XP i could boot into my windows 7. It only boots in XP where do i find the boot path so that to add it in startup and recovery in XP
As Windows tells me, "on EFI systems, Windows can only be installed to GPT disks". This is the error message I get trying to install a Windows upgrade from 7 Home Premium to Pro. I have to do a custom install because I am installing English over Russian. I have looked on the internet about how to change my partition system to GPT. Seems like something I can do, however, I have a question: If I have only one physical hard drive in my machine, is it possible the change the partition system from MBR to GPT? I see lots of examples of doing it to a second hard drive, but not many when it is the only hard drive. It is a new drive and clean, so I do not worry at this point about the data on it.
I have Win 7 installed on my netbook, for watching movies would be XP better. So I have divided the disk into 2 partitions, I have an installation file with Win XP on my disk... I have read some tutorial but still am not sure how to do that - as I do not have CD/DVD on my ntb (and an easy way, hot to repair a system)?
I can't find the driver disks that came with my motherboard, graphics card, etc. D;I downloaded Speccy, and here are my pieces:Those are things that I think I need to get drivers for. I tried googling "P6X58D-E drivers" but kept coming up with multiple lists of individual things to download and wasn't sure what all I should have gotten.
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
This is for a friends computer, It has worked before because when i got the computer i put win 7 on then something ****ed out so i then put xp pro on and since then it doesnt want to know about any os disks, other bootable disks work just not os disks. I have a problem which i have had for a while now, every time i try to install a new os it wont boot the disk so that i can install it, I have been into the bios changed the boot priority to cd-rom first, i have changed the cables around, i have unplugged everything except the dvd drive, i have pulled the whole computer apart and put it back together piece by piece, i have also crawled the internet for solutions but no seems to give any answer that works, i have put a different dvd drive in aswell and that made no difference either.
My system specs are as follows
MB: Asus m4a79t deluxe CPU: Athlon II X4 965 BE memory: Gskill 4gb 1066 GFX card: HIS Ati 5850 Optical: Asus dvd burner Storage: Samsung spinpoint F3 1TB
Ive noticed that MSE seems to do a hidden scan after you boot up and get to the desktop. Doesnt always do it but sometimes. Is there a way to prevent it from doing this?
There is no option in the MSE interface and I cant see any option in task scheduler.
I have Windows 7 64-bit and I want to install Windows XP 32-bit for extra cross-compatibility. I know 32 bit apps can work in 64 bit but I also need my printers and other devices working.
I need help with a guide to dual-boot operating systems but I can't find a guide that includes Windows 7 as the first operating system. Could anybody help me by pointing me in the right direction?
An ex coworker of mine installed Windows 7 Pro on a pc for one of our clients, which was never activated. Now it's 30 days later and it's asking for the key. The sticker with the Windows 7 Pro OEM key on the side of the box is rather illegible. I input the key in an attempt to activate, but it fails. My issue is I don't know if I'm putting in the wrong key or the Windows 7 Pro that was installed is not OEM version. Is there an easy way for me to tell if it is OEM or not without having to reinstall?
For XP when you press F8 and select "Choose OS Menu" it will tell you whether it's XP Home or Pro. For Win7 it doesn't give you that option. Is there a way to find out which version of Windows 7 is installed when a system won't boot? Using the Win7 disc and run a command through repair console to find out?
The label on the Win7 disc or COA tells you, but just want to know if there is another method.
I have Win XP on a separate HD and I am upgrading to Win 7 on a new HD. How do I do this and prevent dual booting from being installed on the Win XP HD. I want to be able to remove the Win XP HD from the system and just run the Win 7 HD.
I have DELL Inspiron 2200. I installed win 7 on it. Now there are two drivers that have exclamation marks in device manager, multimedia audio controller and video controller. The dell site for my laptop doesnt have the drivers for windows 7, only for windows xp. Is there any way to find and install the necessary drivers?
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
I have found guide for dual booting Windows 7 with XP or Vista already installed, but not the other way around.
I allocated some free space from my C drive for the XP install. I installed XP, but when I restarted my computer, I got this error, "A disk read error has occurred; press Ctrl-Alt-Del to restart dual boot".
I installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
Today when I was surfing on my laptop (G74S Series) I wanted to restart the laptop because the internet crashed and it usually helps to restart. But I restarted it holding down the power button thing.So, I restarted it and while I was waiting, staring in to the screen, the blinking "_" thing when you start up was doing that for a while and nothing was happening, and a couple of seconds later the computer tells me that it can't boot the laptop/pc because no drive was found. I saw an error code but I didn't catch it, but it was something like "0x0000".So then on later, it sent me in to "Image Restore" But I have no image to restore with, so I cancel it, and then it sends me into the menu where. I can choose to "Restore Computer" or "Scan for startup errors" or something like that (I don't really have a such accurate memory.)And on the top it also says "os unknown on (unknown) local disk".Everytime I start the computer it sends me to that menu where I can choose to restore my computer etc..And I can't really do much about it since I don't have the windows 7 disc/dvd thing either.And this all came all so sudden I don't really know what to do.I don't have any backu or anything, and windows can only detect my /D: drive and not /C:, and I have my OS on /C/
Yesterday i bought a new motherboard MSI G41M-P26 and i reinstalled windows because of this problem (im using win8 release preview) i installed Realtek (everything went fine) and i restarted my pc, after that i couldn't find the realtek icon anywhere, even on the program files the realtek folder is empty there are only 2 files (RtlUpd.exe can't even run it, and USetup.iss) the HDA folder is empty also.I reinstalled it many times, tried various versions of Realtek, it's not even on the Task Manager. It seems like it's installed but i can't run it. I have everything up to date,'s really important for me to use realtek.PS : i have the sound in case you were wondering. But i need realtek. It has so many good options and i'm using a 5.1 home theater.
