Dual Boot Windows 7 64-bit With (pre Installed) Xp 32-bit
Jul 18, 2011
My installation was FAILED!!! i have windows xp 32 bit pre-installed (in C drive), I was trying to install DUAL BOOT xp with Windows 7 (in D drive NTFS) using ISO image file of Windows 7 64bit ultimate (present in my HHD), i mounted the ISO file of windows 7.The installation started normally but in the FINAL step (Finalizing installation) when system restarts to perform configuration etc, but instead of that i got message "Failed to install windows and rolling back changes".mportant NOTE: Using virtual dvd rom, i mounted and install Windows 7 "32 bit" all right!!! There was NO problem at all of dual booting windows xp 32 bit and windows 7 32 bit on the same hard disk (on different drives)so my question is Windows 7 64 bit cant be dual boot with pre loaded Xp 32 bit ??? or tell me how to do it please..i got 4 gb ddr2 ram and i want to run 64 bit OS windows 7 to utilize it maximum.My system info;Dell OptiPlex GX620 2.8 ghz, 4 gb ram, ATI 4350HD-512 mb Hard disk space on D Drive is 25GB
View 5 Replies
ADVERTISEMENT
Sep 30, 2011
I installed xp pro sp3 on my dell inspiron 1545 on a seperate partition of the same hard drive windows 7 is already installed on. Now the computer will only boot into xp there is no bootmanger screen to choose from.
View 7 Replies
View Related
Jan 19, 2013
My concern is only to make Desktop dual bootable where Winodws 7 is already installed and I want also install RedHat 5 Linux. I want to know what settings in BIOS are required to be changed or what is the proper procedures to do so.
View 1 Replies
View Related
Dec 13, 2010
I have Window XP installed on Drive C:. My son installed Windows 7 on Drive E:. However, when the computer is booted up, it boots up in Windows 7, without allowing a choice. I suspect this can be corrected in BIOS, but don't want to screw it up.
View 5 Replies
View Related
Feb 13, 2013
My existing PC has Win XP. I have a hdd which has a windows 7 install already from where it was previously connected. Can I now dual boot windows 7 and Windows XP?
the new hdd is detected but the os is not detected in the boot loader.
View 8 Replies
View Related
Mar 27, 2011
I decided to Dual boot Hackintosh (iDeneb) and Windows 7 on my HP laptop. I got OS X up and running and I can't seem to repair my Windows 7. The installation disk can't find and fix the problem automatically, so I went to Command line prompt and when I type it Bootrec.exe/scanOS is says that it can't find any installed windows on the disks. I am 100% sure I did not over write my windows partition with the OS X and honestly, I have no idea how to get Windows running again without having to install from scratch.
View 5 Replies
View Related
Feb 17, 2012
Is this possible? I do not have a windows 7 cd, is this necessary? What version of Snow leopard do I need, and what other programs? If you know of a good tutorial, please post it! I'm new to partitions and bios and stuff.
View 3 Replies
View Related
Mar 3, 2011
I have Win 7 installed on my netbook, for watching movies would be XP better. So I have divided the disk into 2 partitions, I have an installation file with Win XP on my disk... I have read some tutorial but still am not sure how to do that - as I do not have CD/DVD on my ntb (and an easy way, hot to repair a system)?
View 3 Replies
View Related
Sep 12, 2011
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies
View Related
Feb 4, 2011
dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies
View Related
Sep 2, 2009
I have Windows 7 64-bit and I want to install Windows XP 32-bit for extra cross-compatibility. I know 32 bit apps can work in 64 bit but I also need my printers and other devices working.
I need help with a guide to dual-boot operating systems but I can't find a guide that includes Windows 7 as the first operating system. Could anybody help me by pointing me in the right direction?
View 5 Replies
View Related
Aug 25, 2011
I have Win XP on a separate HD and I am upgrading to Win 7 on a new HD. How do I do this and prevent dual booting from being installed on the Win XP HD. I want to be able to remove the Win XP HD from the system and just run the Win 7 HD.
View 6 Replies
View Related
Dec 25, 2012
this is what I did, since I have no CD-ROM, to install Windows 7 I created a partion X: NTFS and set it as the ACTIVE ONE, the put there the Windows 7 installation files, and opened prompt command to type bootsect.exe /n60 X: , next I restarted my computer, and automatically it booted into the Windows 7 setup, I installed Windows 7 on the partition C: and formatted the partition C:, everything installed and after the installation finished, a multiple choice menu appears that reads:[CODE]
View 6 Replies
View Related
Nov 12, 2009
As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
View 9 Replies
View Related
Oct 14, 2009
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies
View Related
Aug 8, 2012
I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies
View Related
Aug 1, 2009
I have found guide for dual booting Windows 7 with XP or Vista already installed, but not the other way around.
I allocated some free space from my C drive for the XP install. I installed XP, but when I restarted my computer, I got this error, "A disk read error has occurred; press Ctrl-Alt-Del to restart dual boot".
What am I doing wrong?
View 3 Replies
View Related
Apr 6, 2012
I installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies
View Related
Dec 3, 2010
I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies
View Related
Mar 11, 2009
How to Change the OS Name in Windows Boot Manager ?
View 0 Replies
View Related
Aug 6, 2012
I have installed a year before UBUNTU on my pc with dual boot (i.e. use either window 7 or ubuntu).the NTFS partition that contains the UBUNTU was corrupted and i wanted to take the dual boot from my PC. I used the instructions from the web site: http://www.makeuseof.com/tag/how-to-...t-environment/but the disk management tool would not let me delete the NTFS partition.Could any one help me delete the NTFS partition and use just windows 7 as the only boot. step by step help would be great.
View 8 Replies
View Related
Feb 17, 2009
I got windows 7 running fine for a while now and ever since my XP did not boot anymore.I was not worried to much about it since i did not need it at the time.But now i really REALY need it,See i got all my Cubase projects in there and my cubase plug-ins al setup in XP and i need to get to the projects?At first it did not do anything and using easyBCD did not help either.I cpoied ntldr and detect to the root of C: wich contains my XP and now it shows the bootscreen but hangs on a black screen.The thing is right before the bootscreen shows i see the text" invalid boot.ini" flashing by very quick.I am able to enter that winXP install in safe mode and i tried safe/vga mode as well wich works but thats all.
View 9 Replies
View Related
Nov 9, 2012
I have a laptop I bought a year ago on which a created a dual boot Win 7 (32bit)/Win XP SP3 install, each on a separate partition. It was my first Win 7/XP dual boot install, and my first personal system that I allowed to have a Win 7 install on it at all, so although I have plenty of experience working on pretty much every previous version of Windows, I have very little experience with Win 7 and dual boot configs.
Today about 2 hours ago my audio spontaneously stopped worked for no good reason, so after shutting down each program to see if that cured it (which it didn't), I restarted the system. Out of the blue, for the first time I've ever experienced it, I received the msg "MBR Error 1" - Press any key to boot from floppy. I don't have a floppy of course on my laptop, and if I press any key I simply get the same msg. I turned the system off for a few minutes to make sure it was a good cold boot, but every time I still get the same msg. I tried switching the BIOS setting from IDE to AHCI (IDE is required for XP to boot, AHCI required for Win 7), but I still get the same error msg before I'm even prompted with the OS boot selection, so it made no difference of course.
I looked up this issue and found various suggestions, but none of the ones I found took into consideration a dual boot config., they were all Win 7 specific solutions. I don't what to try and repair the MBR only to have it screw up my dual boot config and be unable to access XP, which is what I use almost exclusively, nor do i want to lose access to Win 7 if at all possible.
I had a backup HD of my complete system that I saved several months ago when I upgraded my HD, and I periodically refresh the most important files on it, so I'm currently running on the laptop in question using my old HD, and it's working just fine. Worst case I can just clone my old HD to my newer HD that's screwed up, but I'll still lose a lot of changes I've made to the OS since I upgraded the HD and have to reinstall and config a number of programs, so that's my last option. I'll also have to back up about 200GB of data from the newer HD which is much larger than my old HD, and then restore it back after the clone, something that will take a lot of time and unncessary effort if I can just fix the MBR.
View 4 Replies
View Related
Mar 10, 2012
I had Win XP on 1 HDD & installed Win 7 on a different HDD. I think I accidentally did a dual boot install because Win 7 won't boot without the the XP disk connected to the motherboard.
That was fine until my XP drive died yesterday. Now Win 7 won't boot. The first time I tried to repair, Win 7 was not even seen. so I booted into diskpart and made the partition active. Now it could be seen as an OS.
Then I did a startup repair. It did whatever it does & when it was finished I restarted the pc but it didn't boot I went back to diskpart and confirmed the partition was active. I went back startup repair and tried again.
This time it said it could not detect a problem, but it still will not boot. What else can I do? My pc is homebuilt. Right now I have the 1 sata drive, 2.53 ghz cpu, 4gb ram, onboard video & sound
View 5 Replies
View Related
Jan 2, 2010
I have Win XP 32 bit on my old drive. I buy Win 7 full retail and a new HD. I set bios to boot from cd etc. Win 7 starts up. It shows the 2 drives, so I select new drive...no problems. It starts install. I leave it to do its stuff.When I come back its up and all ok.I dint get any option to boot from XP. The drive was listed as "SYSTEM" but not old Windows or anything.
Also ASUS chipset drivers dont work and they were listed as 7 drivers.I tried Vista drivers but it normally shuts down and restarts. Nothing.
View 9 Replies
View Related
Dec 8, 2010
I installed Windows 7 32bt profesional on the D: partition on an XP machine (C. Dual boot worked fine, but since I had to reinstall XP I have lost the option to change partitions at boot.I want XP to be the default but with Win 7 to an option at boot.My boot.ini is currently:[CODE]
View 4 Replies
View Related
Oct 30, 2009
I have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
View 9 Replies
View Related
May 9, 2011
I installed a new motherboard for my Windows 7 Home Premium system and was surprised to find Windows won't boot now. I tried repair option from the install disc but didn tried the in place upgrade but after selecting the Install now option I end up with a message that the system was booted from the install disc and I need to start Windows normally and then insert the install disc again which of course won't work when Windows can't boot.I made a new install on a test hard drive to check my motherboard and it is working fine. What can I do? I would like to boot on my regular drive with all my data and programs and not have to go through the long process of finding and installing everything anew.
View 7 Replies
View Related
Sep 24, 2009
I was having win 7 RTM and i tried to installl OSx86 in second hard disk
after few failure i successfully installed OSx86 in my secondary had disk now the problem is that i cant boot win 7
i changed boot order i tried windows 7 disk repair
but both failed
im getting some Boot mldr missing...
Actually even OSx86 is not booting i get OSx86 boot screen with two hard disk to select if i select windows disk it still says the same Boot mldr missing.
View 3 Replies
View Related
Aug 27, 2009
I setup an XP/Windows 7 dual boot on two drives. Currently C: Windows 7, D:XP
Love Windows 7 and now I'm ready to convert to single boot Windows 7.
I'm not real savy re. bcdedit so will need very detailed instructions
I did find the command line in Windows 7 by going through accessories but I'm scared to go further without help.
Eventually I want to clean up the D:xp and use it for storage etc.
I'm guessing this procedure may have already be written up but I can't seem to find it.
View 9 Replies
View Related
May 19, 2011
I wanted to dual boot Mac OS with my Windows 7 but everything I do it comes wrong, simply doesn't work. I tried dual boot with iatkos v1.0i, iatkos s3, iatkos v7 but still nothing.
View 3 Replies
View Related
