so i was on windows, on a website, when my computer formally shutdown and restarted.it wouldnt boot. i checked the bios and there were no changes. tried every bootrec / command and nothing would work. i ended up installing windows on my second drive, making that the boot priority, then adding the primary drive's OS onto that boot menu. i tried moving the bcd using easybcd onto my primary drive then booting from it and still nothing.to sum up, my computer now boots bios-->E:cd->C:Windows.i want to fix it because I need to unplug my E drive to plug in my DVD drive because my gtx 570 is so long it blocks 3/5 of my sata ports and i want to install skyrim again
Running WIndows 7 Home Premium on a Lenovo Ideapad z585 This is a brand new unit.Started having problems after I turned on and started installing Microsoft updates. Did not even have a chance to make any recovery disks.The system does not load properly. No Windows splash screen. Only shows all the program scrolling as it loads.I am getting these two error messages:System Restore Failed: 0X1FSystem File and integrity check and repair Failed 0X490
Working on a a New Dell Inspiron Desktop (Dec 2011) with Windows7 All was we'll until about a month ago, when it would not boot up properly, it would get to the windows logo and freeze, or take a tremendous amount of time to get to desktop. I minimized msconfig start up programs, ran a CHKDSK, start up repair, system restore, everything, still no real luck, however once started it would run fine. Finally I did a complete reinstall, and all was smooth for a day, and boom once again, it will not boot properly on 1st try, then if I power down and immediately reboot it will start and run fine, I am puzzled, could it be a HDD issue? Even though when once past starting up session it runs fine. Usually in my experience if a hdd is the culprit it will run bad in more than just the start up session.
The windows7 cd doesn't boots properly, i mean the first process of windows loading files is good and then starting windows, but then its just the backgroung of windows7 and no installation window pops up.I burned the image using ultra iso at 4x speed.I had a different CD and used that too but same prob appers again.But the problem doesn't ends there, now when i thought to install other cdburning software i get this "Windows cannot access the specified device,path, or file. You may not have appropriate permission to access the item."and its not that, anything i try to install, gives me this problem.Have this problem occured due to previous failure attempts to install windows7,although tecnically the installation never started.
I recently cloned my HDD to my SSD. Then used some software (thinks its something like BCd something)Then I formatted the old HD, it was booting fine, byt as I've realised since iis it was still hooting from the old drive Now I cant run startup repair, I can login but it logs me into a temp user and nothing works, just a blank blue screen i can start CMD but thats it It says preparing your desktop and nothing happens PS I replaced my Optical drive with the SsD?
I have a windows 7 laptop which recently started booting to the BSOD, the starting windows screen comes up, but when the user login page should appear, its just black with the cursor.I can boot it in safe mode, and using the command prompt can run tools, oddly enough if I schedule a CHKDSK /F scan for when its restarted, it continues to load windows fine.I have scanned the whole laptop for viruses with malwarebytes pro, nothing found. I have run CHKDSK /F, SFC /SCANNOW. nothing found, I have a copy of the windows installation disc but there system repair tool doesn't work.
my 3 day old Win7 Ultimate innstallation on my 3 day old computer just crashed after trying(or maybe succeding) to innstall Service Pack 1.
This is how the screen looks when I try booting. [URL]
I have tried all safety modes, last known good config. Debugging mode. The Windows 7 DVD(tells me the chosen OS version can not be repaired), none of these options worked. What else can I try?
Could this be the punishment for not getting genuine windows and using a loader? Can it be saved?
3 day old Win7 Ultimate innstallation on my 3 day old computer just crashed after trying(or maybe succeding) to innstall Service Pack 1.This is how the screen looks when I try booting.I have tried all safety modes, last known good config. Debugging mode.The Windows 7 DVD(tells me the chosen OS version can not be repaired), none of these options worked.What else can I try?Could this be the punishment for not getting genuine windows and using a loader?
So I have a HP laptop running Windows 7 Home Premium 64 bit that turned off during an update not to long ago. I have been trying to get it fixed but I have ran out of options. After a long boot time to the login screen and after I get logged in, I can do nothing on my desktop. It lags and freezes like crazy. Then when I try to get in via Safe Mode, it just restarts.
I have a Philips 220VW 22" 16x10 monitor and till a year ago I had a similar 22" 16x10 Philips monitor(had to replace it since I had some problems with it). After using Windows XP for quite some time I decided to give Windows Vista a try (that was back in 2007). However, every time I boot up or restart Windows, when reaching Windows Vista boot screen (the one with the green blocks, not the log in screen), I had to wait about 10 seconds while the monitor was trying to center the Windows logo without luck since the logo ended up somewhere in the low right corner of the screen.
Unfortunately, this happens on Windows 7. I contacted Philips and they claimed that this is not a hardware issue but a software issue since everything else was fine. I was told that Windows 7 does not have a proper scaled loading screen for this monitor???. This also happens when, by any chance, I end up with the Windows fail options screen (the one with last goon known configuration, normal boot etc - don't know how it is called ). I know I don't spend too much time staring at the loading screen but is there any way to fix this?
my 3 day old Windows 7 Ultimate innstallation on my 3 day old computer just crashed after trying(or maybe succeding) to innstall Service Pack 1.I have tried all safety moodes, last known good config. Debugging mode.The Windows 7 DVD(tells me the chosen OS version can not be repaired), none of these options helped.What else can I try to get past this madness?Could this be the punishment for not getting genuine windows and using a loader?
So I recently dropped my laptop and as a result the hard drive isn't working properly. I'm going to buy a new hard drive and put it in, and then try to plug my old hard drive in and get the data off of it.I've got Windows Vista (Home Premium) on my laptop but I want to upgrade to Windows 7. Will I need to buy a Windows 7 upgrade or will I need the buy the entire thing? Because I don't have a Vista recovery disc (it didn't come with my laptop). Another thing is: my brother has the CDs for Windows 7 but he just doesn't have a spare licence key for me to use. What I basically want to be able to do is put Windows 7 on my laptop
since i have clean installed windows 7 on my laptop my dvd drive is not working properly. it starts reading the disk and stop and keep doing it several times and finally i removes the dvd. i have even cleaned the lens with lens cleaner but still it do read erroe many times.
I am currently in safe mode as my Toshiba laptop cannot boot up properly. I get through the windows startup. All the icons on my desktop look normal, and then about 40 seconds later, a blue screen filled with information briefly appears before the computer shuts down and attempts to restart itself. It happens so fast I can't write down much of what was on the screen other than a data dump, with numbers counting down to 0 and then it does a restart on its own. I did a restore to November 20 and that did not help, so I did another restore for Nov. 9 and that too did not help. I did manage to open in safe mode and managed to find these errors in some event log :
Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 11:06:07 AM, on 11/28/2012 Platform: Windows 7 SP1 (WinNT 6.00.3505) MSIE: Internet Explorer v8.00 (8.00.7601.17514) Boot mode: Safe mode with network support
If you overwrite a file and disable windows shadow copy (system restore) service, is there anyway to recover the overwrited files? I've heard of people recovering data from wiped hard drive disks. I'm need to know because I accidentally erased a text file that had all of my passwords stored on it...
I purchased hp laptop, pavilion g6, windows 7 before five months. There were two partitions c and D. D was fixed for recovery which is damaged now. How can I recover windows 7, my sound is not working properly as well.
I recently built my computer and installed a ssd and a hdd, the OS is on the ssd which is the c drive but since it is smaller than the hdd I tried to change the letters around and make the hdd the c drive using regedit because the default install location seems to be the c drive and after restarting the computer it boots up and says preparing your desktop then goes to a blue screen with just the cursor. I tried booting in safe mode and all I get there is a black screen also
Current setup: C: Boot, Corsair SSD D: Files, samsung HDD
D:/boot files/user/(all user account directories moved here, when possible) I'm wondering if it's possible to install games such as Assasins' Creed or Skrym, but install all game data to this folder?D:/boot files/programs/* Many installers allow you to define a custom installation path, But I am unsure if these games would ask for one or force me to install to the default directory?
I have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
I have a partition question and after scouring the Web, can't find anyone with the exact same situation as mine. Basically what I'm wondering is if I can delete a primary partition and then extend another, non primary into that space.
Here's what I have and why I want to do this: my laptop came from the factory with one 500GB SATA drive, split into two partitions (C, primary, and D, logical, each 250GB). The Win7 install was on the C drive. Recently, I installed a 120GB SSD as a second drive, and using the tools with it, copied the contents of my existing C partition to the new SSD, and then made the SSD the boot drive labeled as the C drive. So far so good, everything works fine.
Now, what I'm left with is this: C: 120GB (SSD, now the boot drive with the Win7 install) D: 250GB (SATA, the original D partition, Disk Management IDs it as a logical drive, extended partition) E: 250GB (SATA, the original C partition, Disk Management IDs it as a primary partition)
So, I have the original "C drive" on E now... it's no longer the system/boot drive. Obviously I don't need the files on it as they are all on the new SSD. What I want to do is to delete all those files and then combine what's on D and E into one 500GB D drive as I have no reason to have the two partitions. Is it possible to just delete the E partition and then extend the D partition into the unallocated space? I'm confused because it seems as though the D partition may rely on the E partition being there since the E drive IDs as primary. Or would the D partition become primary?
I know I could just back up the D partition to an external drive, delete both D and E partitions, and reformat as one new D and restore the files, but I don't want to create more work for myself if I don't have to. Obviously I don't want to mess up the files on the D drive though, which is why I'm asking.
ok so im having a weird problem thats probably very easy to fix.
background info: before my Windows 7 install i had 3 partitions
vista 64
xp 32
empty (soon to be linux)
when i downloaded the newest win 7 build i deleted my xp 32 partition and installed Windows 7 on that partition. because Windows 7 creates that "reserve partition" or what ever, it extended my EMPTY partition with my vista partion. which cause it to become a "logical drive" rather than a "boot" drive. aka i cannot figure out how to access my vista OS.. rather annoying since im just toying with Windows 7 atm.
2 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled PXE-M0F: Exiting Nvidia Boot Agent DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?
I deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
My HP laptop HD crashed, am trying to replace it with a Kingston HyperX 120GB SSD. I do not have Windows installation disks, only have Windows Recovery Disks. All installation instructions I have found for SSD's is for cloning, which I cannot do since the HD is deadI have installed the SSD, booted into BIOS, this simple BIOS version doesn't allow me to change anything on the HD, but it does recognize it and let me do a HD test, so it does recognize the SSD. I then put the Windows Recovery disk in the CD drive, attempted to boot up, but the CD drive just spins and spins but never boots up. I thought the CD drive might be bad, so I tried an external USB CD drive with the Recovery disk, but it does the same (just spins). I even got a new Windows 7 installation disk (from another PC) to see if it will boot from it, but get nothing but a spinning CD I have not done anything yet to the HyperX SSD, haved not formatted or partitioned it.I thought this would be done by Recovery on the OS installationThe BIOS is set up to first boot from the CD drive, so the boot order is not the issue.
Now this should be simple to do but for some reason my PC just won't boot from a DVD (Windows7). I have a GIGABYTE GA-Z77=DS3H and I have changed the SATA mode to AHCI, and when I restart the PC I go into the boot sequence (F12), where I select my DVD drive but it just keeps booting from the C drive.
Is it possible to buy this SSD , install windows to it for faster boot time and better windows score? If it is, how do I do that? I want all my programs/files/folders just as it now...Would I need to like 'uninstall windows' from my current drive (only have one), or can I just take out my current drive, put in SSD, install windows 7 and put my current drive back in again?
I just got done setting up my new Crucial SATAIII 128GB SSD drive and another Western Digital SATAIII 500GB hard drive for my system. I have them both on SATAIII connection speeds and everything is very nice, but how do I make it where I have ALL of my Program Files and dumps on the Western Digital and only the Boot and main files for the SSD? I am a gamer, and I use Steam. So, I think we all know that I don't want Steam to take up 95% of my SSD drive.If anyone can direct me to a tutorial or something, that would be great. I have tried the method of changing the registery on making the default location for all Program Files to drive F:, the Western Digital, but this simply isn't working. Steam won't connect to the servers and Microsoft Security Essentials won't run at all.
