After Startup Repair, User Account Will Not Open?
Jan 15, 2011
Whilst using my Acer laptop it crashed and went to 'startup repair'. The repair lasted roughly two hours but once it had finished and I had turned the laptop back on, the user account had become de-personalised and looked like a 'guest' account. My immediate reaction was to switch user but then it remained at the 'welcome' screen and wouldn't stop until after an hour I gave up and switched it off.It then wouldn't get past that screen on the numerous occasions I restarted the laptop after that.I have tried a startup repair after pressing f8 at start up and have tried loading in 'safe mode' and its other two variations and I still have the same problem. The startup repair this time detected no problems and I have now let it do a 'Windows Memory Diagnostic' check.
View 8 Replies
ADVERTISEMENT
Jan 21, 2011
So I am very familiar with windows 7 and stuff, and for obvious security reasons I don't want to use a an administrator account just to browse the net and do day to day activities like most people do and then wonder why they have malware. So I have installed some software from the administrator account that was originally created during install and then I changed that account to a standard user account and created a separate administrator privileged account named admin. All should be good right? When windows starts up now in the standard user account that I want to use most of the time I need to use my password for certain startup programs like core temp i.e. you have to verify you want to them to run using the administrative password. What if I don't want to do this? I just want them to run without the password? I tried going in and changing the permissions to allow full control for authenticated users and my standard user account but it still asks for a password on log on.
View 7 Replies
View Related
Nov 30, 2012
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 6109 Mb
Graphics Card: Intel(R) G45/G43 Express Chipset, -1265 Mb
Hard Drives: C: Total - 938406 MB, Free - 886307 MB;
Motherboard: Gateway, EG43M
Antivirus: Microsoft Security Essentials, Updated and Enabled
My computer suddenly tells me it can't open my pictures on one of my user accounts by asking what file do I want to use to open it or to go online to search for an opening file. I tried to start a new user account, and I'm told I need to tell what file I want to use to complete and open this account.
View 3 Replies
View Related
Sep 18, 2012
Ever since the last update of my Windows 7 system I have been experiencing problems with my user account. When I click on my account and enter the password, I get the message that the computer is "preparing the desktop" and afterward I see a neutral background and I get the message that I have been logged into a temporary account. In the beginning, I just had to restart my machine and I would still be correctly logged in to my own account after 2-3 attempts. However, yesterday it took me about 15 attempts before I finally logged in.
View 9 Replies
View Related
May 16, 2011
The other day I had to access User Account Controls because I was having some problems with Itunes and when I tried to open the Configure User Account Controls panel, a blank window opened for about 10-20 seconds and then it closed on its own. This kept happening even after I had restarted the computer. Also, this is the only thing with which this happens. Everything else opens perfectly.
I've been looking around for a while now, in other forums and costumer support, and I couldn't find anyone with the same problem or any thread addresing it.
I have a Windows 7 Professional, 32bit and I was using the Administrator account when this happened (it is the only account in the computer).
View 8 Replies
View Related
Mar 17, 2011
I have two applications that require User Account Control. When I include them in my startup they are not executed.Is the a way to bypass User Account Control in the startup configuration file?
View 3 Replies
View Related
Dec 29, 2012
i start my pc up (from being off) and get logged into a temp user profile. It tells me that i cannot acess my user profile and all information will be deleted on logging out. I've looked online for a soloution but none work for me ,I really dont know how to resolve this problem,I have limited knowledge and computer skills. i really dont want to scrap this drive and start over.
View 15 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Oct 31, 2011
I am using Windows 7 Pro 64x and apparently the default user account (Owner) that I use is not working correctly. Unless I have UAC set to Never Notify, I cannot open Control Panel or UAC again. I have created a second user account as Administrator and it works correctly.
I would like to know if there is any way to fix this problem short of a clean install of Windows. If not, is it possible to move all of my settings to the user account that works correctly and delete the one that does not.
View 4 Replies
View Related
Sep 6, 2012
I'm hoping to teach Mum how to use my PC in the near future and she will only be using it for typing etc and maybe the internet. Also she only use it sometimes. shall I create a Limited User Account for her or turn on the Guest Account?
View 3 Replies
View Related
Sep 29, 2011
I would appreciate any help identifying the cause of extremely slow log on times for a user account on our family laptop. The machine is running Windows 7 - 64-bit version, and currently has 3 users accounts 2 admin and 1 regular. The regular account has begun to experience log on times that last for minutes (The Welcome splash screen prior to log on screen), while the admin accounts have no problems. I have seen other posts regarding slow log on times, but I haven't seen those which address the issue for a specific user account.
View 5 Replies
View Related
Oct 19, 2011
I have always been running admin and even until now I run as admin. But, I have been doing a little bit of research and realize that using a standard account is a safer practice. I have never even used a standard account.Is using a standard account a better practice? Also, how does doing average task such as installing programs and updating work through the standard user account?
View 4 Replies
View Related
May 6, 2010
How to Unlock a Locked Out User Account in Windows 7 ?
View 0 Replies
View Related
Feb 23, 2012
How to change a power user account to administrator account
View 2 Replies
View Related
May 11, 2011
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies
View Related
Jan 14, 2011
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies
View Related
Oct 5, 2012
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies
View Related
Mar 24, 2012
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies
View Related
Jul 31, 2010
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies
View Related
Mar 10, 2011
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies
View Related
Jul 24, 2012
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies
View Related
Jan 2, 2011
How do I map existing User Folders to a newly created User Account?I had existing User Folders on drive D. I added a new drive C and installed the OS on C but changed default location of User Folders to D. Now my existing User Folders are in the Users folder on D but there is no User Account associated with them. If I create a user account with the same name will it map to the existing folder within Users?I did a test of this. I created a folder called Test within Users then created a User account called Test and logged in. It created another folder within Users called Test.Computername.
View 2 Replies
View Related
Feb 18, 2012
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
View 1 Replies
View Related
Oct 31, 2012
I changed a user from admin to standard after creating a new admin account. When I boot into the standard user, I am prompted by UAC for the admin password for 4 programs to start. All the programs are ASUS utilities that came with mymotherboard.I have checked the permissions of the programs and the User group has full control.Also, these programs do not show up in the MSCONFIG startup tab. I want the utilities to run but do not want to have to authenticate every time I boot
View 10 Replies
View Related
Jul 30, 2012
the Startup screen. So I went to the Startup repair tool as was recommended, but after few tries nothing has changed. So I tried to recover to previous recovery point, but also nothing. Then I tried booting to Safe mode, and I saw that during the loading process there was no file shown as succesfully loaded. I might also know what could be the cause of this problem, because yesterday when I was shutting Win down, there was a blackout so obviusly some files are corrupted.
View 3 Replies
View Related
Aug 17, 2010
I hate it when this happens and so far, the startup repair has always been able to fix the problem. Today, I'm not so lucky.
I'm using my other built right now coz I have to work. I don't remember what updates I did last night but I do remember the dvd drive firmware was updated.I popped in the system restore disc, start it up and the same page appears: Start with windows start up or Start windows normally. Tried both and neither one of them would bring up system restore. This built was only a month old and was hardly used so far so no system restore point was created at this point. I have files in it that I would like to keep but I can't get to them right now so a clean fresh install is needed but I can't get it up.
View 9 Replies
View Related
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
View Related
May 13, 2012
I was installing a patch so i could get the Personalization Panel on my Windows 7 Home Edition and had to restart my computer. When i was logging in my user account i typed my password and the screen just went black and then just brought me back to the start up screen where you pick a user. I share a computer with my sister and she couldn't log in her account either. I'm guessing there was probably some kind of virus or something but i'm not sure. What can i do?
View 1 Replies
View Related
Apr 24, 2012
I know one can change how to allow User Account Control to change its settings (the slider) but is there a way for controlling which programs are always allowed (giving it permission hence never having to see that annoying window for that program)? I do not want to disable it. I just want Windows 7 to know which programs to allow and which to not allow.
View 1 Replies
View Related
Aug 17, 2011
I just got a new computer. I had my User Account setup, had a password on it. I was making sure Windows was up to date, had to restart, then restarted on its own again(I'm assuming part of the update), and when it booted back up, it said my account has been disabled. Please contact your system administrator. I can sign in under Administrator, or Other User. The password I set up with my account doesn't work for Administrator. Is there a default password?
View 3 Replies
View Related
Jan 30, 2012
I have an HP Pavilion with windows 7.When the user account screen comes up for you to log in on your account, under mine it says "locked".Why does it say that and how can I change that setting to unlocked.My account is the only one on the computer and we all just use that one, so there are no other accounts on the pc.
View 5 Replies
View Related
