I bought an Acer 5742 with Windows 7 last month, and I have reason to believe I was attacked by a virus. Losing hope, I try using the 4 recovery disks GeekSquad gave me when I bought the computer. I choose the option to restore my computer to factory defaults while backing up my personal files. Everything goes smoothly up until the "updating system" part. According to the time-elapsed, it's been 10 hours since its been frozen on 99% (still on Disc 3 of the 4). I'm going to put in Disc 4 and leave it for another couple hours while I go to school. If I don't see any changes, I'm going to force a shut down and reboot the computer. Will this harm my computer, and possibly corrupt my system?
my computer is not working. It won't get past the start up screen so I am trying to do the Acer eRecovery Management. I can pull it up just fine but the blue circle (thinking) has been there for awhile and won't finish loading..is that normal?
I have my daughter's Acer 4820T laptop running Windows 7 Home Premium with 4GB DDR3 memory. The original HD failed, and I had to purchase the eRecovery media from Acer as she had not created them when it was working fine. I installed the new HD a 500GB Seagate, but when I run the eRecovery, I am able to choose the UI Language, and on the next screen where the choice of recovery options appear, the only one of the 3 options available is Exit. Both the Restore to Factory Settings and the Restore OS Saving Data options are grayed out. I tried changing the SATA method in the BIOS from ACHI to IDE. I wrote Tech Support but the system is 18 months old and out of warranty, and the only help they offered was to tell me to partition the drive with one partition formatted NTFS, directions to their support link.
I tried to restore Windows 7 Home Premium 32-bit on a new 700GB hard drive on my ACER Inspire X3950 by using the 3 recovery DVD's that were created by ACER eRecovery Management Software. The computer won't boot even when Safe Mode is selected.
Is it a formatting issue of the new hard drive? The original hard disk was 1TB and had three partitions: PQSERVICE ~35GB, BOOT SERVICE (or some title like that) 100MB, and ACER with the remainder of the space. How should the new hard drive be formatted?
Recently, I got an Acer z5610 AllInOne computer.Everything is installed and working fine.The problem I have now, is that I need to install a second hard drive(64 bit SSD)I opened the case, installed the drive, and windows recognised it immediately.Now I want to change the system from old HDD to the new SSD. Is there a shortcut? Acer eRecovery doesn't seem to support system drive change.
I have an ACER One (Model A0531h) netbook. I have now tried several times to recovery it to factory settings using the built in recovery partition. I access this recovery partition by using Alt-f10 during boot. The recovery runs fine up until 99% where it 'sticks'.. for days..The application running the recovery is Acer eRecovery Manager v7.5.15. I have also recovering using the recovery DVD's which I burned. They seem to go through the process but then when I restart the system I get a black screen complaining about missing files. I am then instructed to run recovery...This is driving me crazy. I have also reseated the RAM but dont want to have to strip of the cover to reseat hard drive. I can however hear it running and I have also used Active@boot to reformat the C drive. The recovery partition has not been touched and is not damaged. It runs perfectly up to 99%.
So one evening my laptop randomly restarted itself and upon logging back in I found that I could not run almost any of my programs (.exe files). I tried checking for anything unusual in the registry but found nothing. In task manager when I clicked a program or attempted to run it in various ways I would see it pop up for a second before it got killed.
Finding no way of fixing it online I decided I would attempt the factory restore option that comes with the laptop in the system recovery that places all your documents in a C:Backup file. But nearing the end of this an error came up saying 'setup is starting services', which says to restart the computer to continue. But I can no longer get it past this screen. I've tried rebooting it in safe mode as well.
This is an acer aspire laptop that is stuck in hibernation/sleep mode. It has windows 7, the power light blinks, no response whatsoever to windows key or any other keys including ctrl alt del. I have checked without memory and hard drive and have the same results. It will power off but will not get out of hibernation mode while it is turned on.
Ok, so earlier today i decided that i needed to restore my laptop to factory default. As you can see from the title, i use an acer laptop which means i used the acer Erecovery software. All went well at first, although it took a stangely long time at a screen which said "setup is starting." The problem now is, I am now stuck on the acer 'software installation screen!' It is stuck at 41/48 where it is trying to install clear.fi v1.0. I think i heard the sound of an error earlier which worries me as i dont want to force restart my laptop as it clearly says not to do that and doing this caused my hard-drive to break last time
i try ed resetting my laptop to factory setting and got stuck on the set up and it keeps restarting it when i get into the start up page is there anyway to reset from the boot menu
I started to do a full system recovery on my son's Acer Aspire 5750z, Windows 7 Home Premium 64-bit using the (4) Recovery DVD's we made when we bought it. Everything was working fine through the first three discs. I was called away while the third disc was in use (maybe 10 minutes) and when I got back to the machine, the window was up asking me to remove disc 3 and insert disc 4. I did, and in the 4 hours and 15 minutes since then, nothing has happened. The Acer eRecovery Management (v8.3.2) Window is up. Step 5 "Restore Progres" is highlighted. The elapsed time counter is continuing to run (currently at 5 hours 8 minutes and counting), the "Restoring System" bar is full and shows 100%, and the "Updating System" bar is stuck at 2%, which is where it was when I put in the 4th disc. I am tempted to shut down the laptop and start all over again, but I am afraid that it will mess something up if I do..
I have a Compaq Presario CQ56 64-Bit (Windows 7 Home Premium) laptop that I bought before the summer, today a Windows Update has given me an Acer display update published on the 28/12/2011. I thought because I had my vga cable plugged into the TV Windows Update may have become confused but despite checking for updates again it still appears there as optional.
AMD/ATI is recognized by Windows and Windows Update and there had already been a display driver update not so long ago, so I cannnot understand why I'm receiving an update for the wrong machine?
When i turn the computer on i get the screen : setup is starting service. Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click ok to restart the computer, and then restart the installation. I have contacted acer they tried to help with the ALT and F12. Nothing I have tried works.. They told me to order the recovery discs for $20.00. I did , and they dont work either... I contacted them back, and now they say to send it back to them and for $199.00 plus shipping, they will repair the computer..I do not have the money for that..I have the the system disc, the 3 recovery disc and the language disc , that I just ordered from Acer for $20.00.
When I press down f10 and ALT at the same time during boot up from the factory recovery disk when seeing the splash screen, nothing happens and the 'acer laptap just boots from the regular hard drive as usual.
i just have a assignment to explore the memory management of win 7
i have a problem to find some resource about this case, because win 7 is a new OS,.
and i got some information that win 7 was using a new method of memory management that different with the past version of windows OS and make it work faster..
i very hardly to find what memory management method was used in this OS (win 7),..
can u help me to describe or give me some information to find about the new method of memory management in win 7...?
I mean if i don't use partition all data (Programs, user data, Images, video, Music, ...) on one partition.I don't realy like that especial for backing up Data and System at deferent times and also for accessing data from a second operating system on same PC.So I use a second partition for User-Data (Private data, schools data, ...)and a third partition mainly for Media Data Pictures, Music and Videos Most of Music and Video is on an External HD.But in the folder "C:usersNAME" there are many folders like ".APP-NAME"and also Desktop, Download, My Pictures, .... I don't really miss them on my "Data" partition as my Musik is not in "My Music"my videos is not in "My Videos". But much applications "use" this Folders for default saving point or loading point,
I've been using Windows 7 now since 6th of May, and love it! I haven't had any troubles except 2, but this topic is meant for only one.
I remembered an application called Everest, it lists all of your hardware and information about it, OS and stuff, really nice. It also has tab for sensors, where you can monitor temperature.
When i was looking around in Everest, I found out somehow 7gigs. of virtual memory is available, and most of the time somewhere around 2gig. is being used. That was kind of weird, because I have 4 gigs of RAM, and most of the time only 25% is used of it. So, why would Windows prefer use of the virtual memory over the use of physical memory? I found out virtual memory could be managed in "advanced system settings". because 2.5 gigs of virtual memory was used most of the time, I thought: why not just completely disable paging file.
So it's: computer --> right click properties --> advanced system settings --> advanced tab --> performance --> settings --> virtual memory --> change.
So finally comes the problem, I have successfully disabled the paging file, and it says "total paging size for all drives: 0 mb". But when I go to Everest, it still says I have 7 gigs of Virtual Memory available, and it uses 2 gigs. I want to make full use of my physical memory!
What is a simple program that boots quickly,is user friendly and will allow me to access all them music on my computer (or in the music folder) build playlists etc ?
Many many people want to know the answer to this question but never asked it and continue using crappy music software like windows media player and hp media smart music player.
Getting several BSoD a day and it driving me mad! I have replaced the RAM but still giving me the "fault in non paged area" error and i have reinstalled windows and the error still there
i have a pile of memdumps if someone can help me
BSoD error i have had "IRQ", "MEMORYMAGEMENT" and "NON PAGE FAULT",
with me replacing the ram and reinstalling windows, where else could cause this issue?
Trying to create the 3 recovery discs for my new computer with Windows 7. It keeps asking for a clean disc even though I am putting in new formatted disc. I was able to create the System Recovery Disk with no trouble.
I built a tiny yet powerful HTPC with the new sandybridge Intel i3 CPU. is there some kind of software that will turn off the spinning HD when it is not needed and only turn on if say a tv recording is scheduled for a certain time, record the show, and then turn the hd off again. it runs windows 7 64 bit, 8 gigs of ram, 2tb hd, blu ray burner.
I'm new to this community and not the most computer savvy person, but I've been having this error for a while and it's starting to bug me. We recently got a new computer but as I start to use it, I'm noticing a lot of crashes and blue screen. Of the errors I've noted, the major one seems to be the "MEMORY_MANAGEMENT" blue screen. I'm currently running Windows 7 64-bit and I have about 16G of memory installed.I did some preliminary research and many topics suggested either pulling sticks out (which I do not know how to do), posting minidump file (attached), and running a memory test (I just ran it for 12+ hours and it still did not finish, but I need to use my computer).
Tried seatools which shows the drive as healthy - it also shows up the three partitions on it. The drive is from an Acer laptop, the drive when using external USB caddy shows in computer managment but not in my computer. Ran some data recovery software which scanned each partition but it showing only the option to recover the files.
I have done so for safe keeping but what I wish to do is fix the drive so that it will boot up windows again on the laptop (windows 7). I have also tried DiskInternals PartitionRecovery which also took ages to scan the drive partitions and will allow to recover the files to another location. Which other software could I try to rescue the partitions on the drive. There are three in total on the drive with probably the following on them.
After previously solving the BSOD error "a clock interrupt was not received on a secondary processor within the allocated time interval" by replacing the CPU, I have run into another BSOD. This time the error is "memory management". After doing some research I'm thinking this error is about some program conflicts or something similar (I'm hoping that is the case!), instead of a hardware problem. I have attached the last 3 minidumps I have.
the title say my problem is with pfn_list_corrupt and memory_management have already reinstalled windows thinking that was something bad with filesystem , but I still have this problem! Then i thought rams were broken , but after 8 hours i got 0 errors. And they are random , if i m play bsod , if the pc is idle BSOD.
I am am running Windows 7 64, and my C drive was 150GB, and the other drive was 450GB. I decided to extend or expand it by deleting one of the volumes. However, I have come across a speed bump while doing this. After deleting my unused partition which was 450GB, and right clicked on the C drive to extend, but the extend option is greyed out. The shrink volume seems to be clickable though.
I had a problem with Win7 not starting and the local shop I bought my computer from performed a Win7 reinstallation. I've just noticed a change in Disk Managagment which I'd appreciate clarification on. I'm running Win 7 Home Premium (64-bit)/TWO hard drives each 500Gb/8Gb of RAM, I also have TWO DVD-Rewriters.
