I have an ACER One (Model A0531h) netbook. I have now tried several times to recovery it to factory settings using the built in recovery partition. I access this recovery partition by using Alt-f10 during boot. The recovery runs fine up until 99% where it 'sticks'.. for days..The application running the recovery is Acer eRecovery Manager v7.5.15. I have also recovering using the recovery DVD's which I burned. They seem to go through the process but then when I restart the system I get a black screen complaining about missing files. I am then instructed to run recovery...This is driving me crazy. I have also reseated the RAM but dont want to have to strip of the cover to reseat hard drive. I can however hear it running and I have also used Active@boot to reformat the C drive. The recovery partition has not been touched and is not damaged. It runs perfectly up to 99%.
I started to do a full system recovery on my son's Acer Aspire 5750z, Windows 7 Home Premium 64-bit using the (4) Recovery DVD's we made when we bought it. Everything was working fine through the first three discs. I was called away while the third disc was in use (maybe 10 minutes) and when I got back to the machine, the window was up asking me to remove disc 3 and insert disc 4. I did, and in the 4 hours and 15 minutes since then, nothing has happened. The Acer eRecovery Management (v8.3.2) Window is up. Step 5 "Restore Progres" is highlighted. The elapsed time counter is continuing to run (currently at 5 hours 8 minutes and counting), the "Restoring System" bar is full and shows 100%, and the "Updating System" bar is stuck at 2%, which is where it was when I put in the 4th disc. I am tempted to shut down the laptop and start all over again, but I am afraid that it will mess something up if I do..
I accidentally reinstalled the wrong Operating System Recovery CD on my Acer Aspire 5534 laptop, and I want to return it back to factory settings. How do I do I restore it back to factory settings?
I accidentally reinstalled the wrong Operating System Recovery CD on my Acer Aspire 5534 laptop, and I want to return it back to factory settings. How do I do I restore it back to factory settings
When i turn the computer on i get the screen : setup is starting service. Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click ok to restart the computer, and then restart the installation. I have contacted acer they tried to help with the ALT and F12. Nothing I have tried works.. They told me to order the recovery discs for $20.00. I did , and they dont work either... I contacted them back, and now they say to send it back to them and for $199.00 plus shipping, they will repair the computer..I do not have the money for that..I have the the system disc, the 3 recovery disc and the language disc , that I just ordered from Acer for $20.00.
When I press down f10 and ALT at the same time during boot up from the factory recovery disk when seeing the splash screen, nothing happens and the 'acer laptap just boots from the regular hard drive as usual.
i recently was using a product called ptedit32. In which i was trying to unhide my pq service to see what was in there. So i changed its boot from hidden to active.(0C was changed to 07) with the other three partitions being 07 as well. This has turned out bad for me now. It seems there is a mbr that is not being recognized. I turn the acer 0ne aspire d255e on and the machine goes to a screen that say can't load windows due to recent hardware or software changes.Status: 0xc0000225It also ask to have the installation disk inserted, of which there is'nt one and the computer doesn't have a dvd/cd drive anyway. It was all on the pq service, which is the hidden partition. I've tried flashing the acer pc as well from usb. and can't get that to work.
So one evening my laptop randomly restarted itself and upon logging back in I found that I could not run almost any of my programs (.exe files). I tried checking for anything unusual in the registry but found nothing. In task manager when I clicked a program or attempted to run it in various ways I would see it pop up for a second before it got killed.
Finding no way of fixing it online I decided I would attempt the factory restore option that comes with the laptop in the system recovery that places all your documents in a C:Backup file. But nearing the end of this an error came up saying 'setup is starting services', which says to restart the computer to continue. But I can no longer get it past this screen. I've tried rebooting it in safe mode as well.
This is an acer aspire laptop that is stuck in hibernation/sleep mode. It has windows 7, the power light blinks, no response whatsoever to windows key or any other keys including ctrl alt del. I have checked without memory and hard drive and have the same results. It will power off but will not get out of hibernation mode while it is turned on.
i cannot get to control panel to change or set my password... i let my son use it and he changed it by not knowing what he was doing and now im locked out and cannot get pass the sign in
I would like to know how I can reset my Aspire 5532 Laptop from Yahoo to Google's format and how to just erase all of the used memory, etc.from yahoo. Basically how to start from scratch, with my Aspire 5532 Laptop ?
The model is 532h. The hard drive went bad so I replaced it with a brand new hard drive that's smaller in size (120GB vs original 160GB). I first cloned the recovery partition "PQSERVICE" to the new hard drive and then install it, ran alt+F10 but it shows "no bootable device". Alt + F10 worked with the old hard drive and the recovery ran fine but because the drive is bad it gave an error at the end. With the new hard drive the alt+F10 doesn't work at all. I checked in the BIOS and it's there. I changed the partition type to active but still get the same error. I finally use the recovery disk, wiped out everything and the recovery went through till the end (it said successfully) but after reboot I still get "no bootable device" error.
I have an Acer Aspire 5534 laptop and cannot reset my Admin. password and did not set up a recovery disk, is there any other way I can reset the password?
I have an acer aspire desktop, which I recently restored, or attempted to anyway. It has become stuck on a screen saying 'software installation' then a loading bar with 'installing nvidia vga 3d vision above it. it has been like this for at least ten hours, and seems to have gotten nowhere. I tried turning it off, but it just resumes in the same place, anyone know anything?
My Windows 7 x64 desktop box developed a problem this morning with the ACLS file that Windows diagnostics could not fix. After several attempts, I decided to do a non-destructive re-set via the recovery management software included with the box (eMachines 1331, which came with no disks, only recovery partition).
The process seemed to go smoothly, but the Restore Progress screen has been sitting at 'Please wait a moment...' for well over an hour now and I'm puzzled. Shouldn't there be some sort of progress bar indicating how long remaining in the process, or is it meant to just sit on the 'Please wait a moment...' with the trailing dots cycling from 1 to 5 dots as it is doing?
The drive is 683 gigs usable, with about 50% in use for files and programs.
I am having trouble with a friends computer... his computer was becoming unresponsive with up to an hour start up times before he was able to use it. We tried to run anti-virus software but wouldn't complete any scans.
We decided to go ahead and save all the files he needed and do a complete system recovery f11 (format hard drives back to factory settings) when started it takes about an hour or two and hangs up at 9% and will go no further. Left it overnight to no avail.
I have an acer aspire one and when I turn it on it doesn't ask me to type my password even though I have set one. I have tried resetting my password but it still doesn't make a difference.
I already have windows 7 fom start on my acer aspire 521. Then it got slower, so I installed 2Gb memory. Now its getting slower again.So I want to fully reinstall the software from scratch. I do not have an recovery disk from the binning. So what is the procedure and do i have to reformat the c drive or can it be done without?I don't want the old registry and so on, because thats one of the problems I think.
my acer aspire one cannot come out from system recovery and complete the process... there is a messages pop-out that is "windows could not complete the installation.to install windows in this computer,restart the installation" so i hit enterok... then the same problem still popout... and remain in that state over and over again..i try(F2 then F8) Advance Boot option to start my computer normally hoping that the installation to stop and start as previously.. but all the option that i try still continue the installation... what should i do??
So I've been trying to solve this since it randomly started happening yesterday, but to no avail. I have a Samsung Q430 Intel i5 with Windows 7 x64 Home Premium (SP1), and the computer randomly started to lag, so I restarted it. It logged in successfully the first few times, but became extremely laggy after login, until it froze up completely each time. I then tried the recovery CD, and it worked the first time, but nothing changed, and it was still laggy. However, the computer could not even get past the black loading screen anymore, and began on a continuous reboot cycle, each time ending with a flash of a BSOD that I couldn't catch. It restarts to two options: Launch startup repair or Start windows normally, both of which end up freezing and restarting.I have tried:-Safe Mode (worked first time, but was laggy, and now it just freezes during loading)-Last Known good configuration (nothing happened)-Recovery CD (becomes stuck while trying to find the OS, says "Drive E: 0 bytes, windows 7 and never finishes loading)-Installation CD (stuck at entering setup screen)The only thing that really works is the Ubuntu Live CD.
