I have a Logitech optical mouse and I need it to be rt.click. Whenever I reboot, Vista Premium resets to default. It is o.k at the user window and almost at the end of the desktop b4 it resets. Vista also deletes my passwords in Outlook 2002/XP every bootup. But Vista Mail is untouched.
View 4 RepliesMy Logitech Optical Laser USB Mouse has just recently begun turning on and off whenever it feels like it. I have used the mouse for years and all seemed good. I got a new laptop 5 months ago with Vista Ultimate 32 bit and the mouse worked fine, but a few days ago my laptop froze up and I was forced to hold down the power button to restart it. When it rebooted the mouse will work for a while then turn off for 3-5 seconds and then work again. Does this a few times every minute. I have 6 USB ports and tried the mouse in all of them but has the same problem. Tried the mouse on another computer and it works fine. Device manager says device is working properly and all latest drivers are alredy installed.
View 7 Replies View RelatedThis problem started a few monts ago. It is a simple MS wired (through USB) Scrolling Optical Mouse. It only works intermittently. I am using Vista Business on my ThinkPad T61.
View 8 Replies View RelatedI have a Microsoft optical mouse. It's a couple of years old and I'm trying to determine whether it's faulty or not. The problem seems to be with the scroll wheel. When on a webpage and using the wheel to scroll, often the page will continue to scroll (only another 50 or so pixels) after I've released the mouse. It seems to be at least a full second or two after I've finished scrolling, let go of the mouse then the page continues to scroll (only by one increment/decrement). It doesn't seem to be the wheel clicking into place either, as I first thought. I'm trying to find out if anyone else has experienced this and/or whether it could be a registry setting or something else causing this. Otherwise, it's a hardware issue.
View 4 Replies View RelatedI have Windows Vista Home Premium 32 bit, up to date, Microsoft Office 2003 and a Microsoft Optical Mouse 3000 with Intellipoint 6.1 (Takes breath....) Under XP, if used the wheel in word it would scroll lines of text by rolling the wheel and zom in-out if I rolled the wheel while holding CTRL down on the keyboard.
View 4 Replies View Relatedmy optical mouse has started behaving erratically (moves around on its own a bit) have used tools to remove and detect conficker, updated avg regularly and install all the security updates, so.... seems like a virus but I don't know. Anybody can troubleshoot this issue? And What woudl be the best antivirus program- free, and the best purchased? also the best conficker detector. I mean this may not be a virus but still...
View 4 Replies View RelatedI have an old Logitech but fully functional mouse (cordless optical).
When I ran Vista x86 Ultimate, I installed a small program that allowed me to double-click with middle mouse button. Now, with Vista x64 Ultimate, it doesn't work anymore.
Do someone know another small program to allow me that?
Built a new PC a few days ok. first day went fine. Today ive been experiencing freezes every 2 hours or so but my mouse can still move across the screen. I cant click on anything but it can move.
View 6 Replies View Relatedi have an HP Notebook with a Vista Home Premium 32bit OS. I can't do a mouse click, directly on the touchpad. The Synaptics Touchpad V6.5 is installed. II tried to download a newer version of the synaptics, but the system told me that the installed version is newer.
View 5 Replies View RelatedI am a new user of windows vista home premium, I have been suffering from a strang problem somtimes I open any file some of the thing remove from my destop and my mouse's right click didn't work here is the picture of my problem
View 9 Replies View RelatedIs there any way short of turning this blankety blank thing off that I can start programs on my own computer without having to click three times and issue two permissions every time? Heck, I even have to do that just to empty the recycle bin. That's incredibly a pain in the butt.
View 9 Replies View Relatedwhenever i go on a file and go under "send file to" by the right click of the mouse it freezes and then the whole desktop goes under not responding?
View 6 Replies View RelatedI have a HP Touchsmart PC, running Vista x64 and using Internet Explorer 8. Recently we had a malware virus which was successfully removed by the computer technician. Everything is back to normal and when we run a virus scan it is now all clean. However, when we are on the internet the mouse now can't click with the left button
on websites and we can't use the left button to click to navigate around the site. The only temporary way I have found (which is very difficult and limiting) is to right click on the site and scroll up to "Open" or click on the site with the left button and hit "enter" which sometimes works.
I have replaced the mouse and ensured all the mouse setting are correct. This problem doesn't happen in emails only on Internet Explorer.
I have recently accepted a Windows Update and it seems that after this I lost the right hand click function on my mouse. I generally use a toolbar from the taskbar at the bottom of IE8, I can still highlight this but cannot see any sub-menu's.
View 5 Replies View RelatedMy start button no longer responds to my mouse click. Any ideas what I can do to restore this so I can get into my start menu?
View 5 Replies View RelatedNot terribly important (I can liev with black & white icons), but annoyance indeed and only started recently. It does NOT affect WindowsExplorer/Filemanager icons for folders, files, etc. Those have been and are fine 100%. Just the mouse right-click, now shows weird black&white icons, icons themselves are OK, colors are not. Difficult to see quickly what to click as I used to know by color what is what. For example right-click on empty space in Windows Explorer and select "new text Document" - the icon for it is a very bleak, black & whit eone. Use to be vivid greenish/bluish.
View 4 Replies View Relatedno matter what i do at times left click opens closes application with out it stay open its like i clicked to close app. i just uipdated drivers i hope that was it.
View 5 Replies View Relatedwhen i upgraded to SP2 my start button stopped responding to my mouse click. i tried goin back to SP1 but it still didnt work? when i try to right-click on the start orb it comes up but with three black rows at the bottom of the right-click menu? i had to download that "Vista Start Menu" just to use it again but i'd rather have the normal start menu.
View 5 Replies View RelatedWindows and other programs are starting to lock up when I click the "RIGHT" mouse button.
View 9 Replies View RelatedI have a microsoft wireless keyboard and mouse which work really well but when I reboot, the keyboard shortcuts that I have programmed don't work until I go into properties and click on them and then click ok. The keys then work ok until I reboot again.Is there any way that I can programme the changes so they are the default programmes whenever I reboot. The software loaded fine and I clicked on apply and save when I originally set the keys.....I have a HP Pavilion DV6700 Laptop with windows visa home premium which is about one month old.
View 9 Replies View RelatedIt seems that I'm not the only one who had the Windows Sidebar no longer working after installing the new release of Internet Explorer. After spending a lot of time trying to find a solution, here is the way I have solve the problem. Now the sidebar is just working fine. This behavior is observed if the XML registration is missing in the system. To fix the problem, use the following steps:
* Close Windows Sidebar. To do so, right-click on the Sidebar icon in the Notification area and click Exit
* Open an elevated Command Prompt window. To do so, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
* In the Command Prompt window, type the following and press ENTER:
I had a fried computer that had an optical drive I wtd to take out and put into my new computer running Vista. The drive has IDE connections on the back (its about 5 yrs old or so). I had bought an IDE to SATA drive adaptor in order to hookup the drive to my computer. I put the card on the back of the drive and hooked up one cable out of the back of the drive to an empty power cable...and the other cable out of the back of the drive to the SATA3 slot on the motherboard (the only one not used).
I went to re-boot the computer but during the boot process, it hangs. Do I have to do anything to the master/slave thing on the back of the drive or do anything in BIOS before the drive works? I am a bit new to this but I had thought I did things correctly. I just figured that I would slap the drive in..the computer would recognize it..install drivers..and be good to go.
My suspicions started off on the DVD-R drive I was using, then moved to my motherboard, then to my SATA controller drivers, and now finally lie on Windows Vista itself (dozens of hours of troubleshooting, adding and removing hardware, and re-installing Vista and XP led me to this conclusion).
The S203N worked completely in XP. In Vista, it works "almost" completely. The catch is that when you put a disc in the drive, the volume label in Windows Explorer does not update (nor does the drive icon, or more importantly, the right-click context menu). Sometimes it recognizes data discs as blank, because of this. However, either rebooting the system, or simply logging out and back in (even easier) will "force" the drive to refresh (volume label, icon, and all).............
I have only two optical drives in my system ever since the beginning, but some how there is an additional icon shows up with letter assigned in "computer". Can't get rid of. It doesn't show up in Disk Manager nor Device Manager as shown below.
View 9 Replies View RelatedWhen I click on my empty optical drive within windows explorer, the tray opens automatically. I would like to stop this behaviour.
View 7 Replies View RelatedWhen I click on my empty optical drive within windows explorer, the tray opens automatically. I would like to stop this behaviour.
View 7 Replies View RelatedThis seems to be common—the optical drive doesn't work. I'd like to detail more symptoms, though, that might help form a real fix for those whom the solution at The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista wouldn't work, as it didn't for me (Upperfilter and Lowerfilter values don't exist in my registry).
Upon a clean installation of Vista, the optical drive works fine. After installing the whole slew of current updates, it stops working. I didn't figure this was a thread for the Windows Updates forum, though. When putting in a disc, the drive goes to work (illuminated busy light and the sound of the drive spinning) for a bit, then turns off and on continuously, freezing the computer until the disc is ejected. A disc left in the drive upon start-up will work correctly. Once I open the drive, however, that's when it no longer works, whether I load the same or different disc. So my question is, is there a way to fix this? Other solutions, like uninstalling the drive in the device manager and rebooting, haven't worked for me.
I think it was after the updates loaded for windows incl. sp1 or after the vista patch for the game witcher which came from the microsoft site. Problem is that my optical drives dissappeared and the wireless adapter seemed to become D drive. Device manager says drivers missing but windows says has latest drivers. Have disk for both LG drives but computer cant see drive to be able to run.
View 6 Replies View RelatedI have evga motherboard with built in Realtek HD audio (ALC883). Board features 2 ports for digital audio (optical and coaxial). and according to manual both are output. However when installed vista drivers one of the ports has been chosen as digital output (optical) and another as digital input (coax) (i can see that when i hover the mouse over the jacks in "Realtek HD audio manager") Is there any way to make the coaxial port as an output port instead of optical? My my HT reciver has no free optical ports so i have to use coax to get some sound from the computer.
View 9 Replies View RelatedI am experiencing some interesting problems with an optical drive on a Lenovo T61p laptop running Vista Business x86 SP1. The problem is that the DVD drive will not auto play and while it recognizes that a disc is in the drive and the files on the disc, it does not recognize any executables even though they are there.
I am shying away from it being a hardware issue due to the fact that I have swapped the drive out with a known working drive and it does the same thing. And the oddest thing about it is that when a disc is in the drive a little apple pops up in the lower left hand corner of the DVD icon in My Computer:
Installing vista x64 took 3 days (unbelievable really!) - and clearly had problems reading / extracting the files from the DVD drive. Vista works completely fine now (normal speed, no bugs-of-significance, with one major exception: The optical drive does not work correctly) The drive is recognised correctly in device manager, there are no reported errors and the drive appears correctly in explorer.
Insert a disc, and the drive sounds like it is struggling to spin up correctly. Explorer takes about 2 minutes to read the volume in. Succeeds, gives the volume name and launches autoplay with the appropriate options (video for a DVD, slideshow for a cd of photos etc. . . ) Try to open to browse the disc, or run a file and the application hangs (e.g. try to browse with explorer, and explorer hangs; try to play a DVD and media player / centre hangs etc.). Killing the programme with task-manager usually works - eventually. The drive has the most recent firmware.
The real kicker is that I've tried two drives in the same machine, with the same error. I've tried the same drives in another (XP Pro) machine, and they work fine. I've even tried installing XP-Pro on the problem machine, and under XP-Pro, the drives work fine. The only thing I can think of is that is there is some kind of compatability issue between the motherboard and Vista x64 - which would affect the optical drive. That said, I have 2x Samsung Spinpoint SATA II drives installed on two other ports, and they work like lightning.