I have Windows Vista Home Premium 32 bit, up to date, Microsoft Office 2003 and a Microsoft Optical Mouse 3000 with Intellipoint 6.1 (Takes breath....) Under XP, if used the wheel in word it would scroll lines of text by rolling the wheel and zom in-out if I rolled the wheel while holding CTRL down on the keyboard.
View 4 RepliesRunning Vista Ultimate, had tried to install Logitech Pro 3000 cam. Not able to do so, bought Microsoft LifecamVX-3000 which is supposed to be Vista certified. Inserted the installation disc as instructions and was told that it was not compatible with Vista. Link to Microsoft where an updated file was available. Downloaded and installed and plugged in USB connector for the Cam as instructed. Plug and Play now pops up and tells me that it is not certified. Another box comes up telling me that it is finished. Close the Plug and Play dialog box. and the another box tells me that installation has failed and underneath thia I get, Installation was successfull. Am not able to use it because Cam has not been detected.
View 4 Replies View RelatedI installed the software & followed the installation instructions (I thought), but the wireless mouse & receiver (which the system reports is working normally) doesn't seem to do anything. The old mouse is still installed & connected & works. What should I do to get the new mouse working? Be gentle with me I'm not a computer wizard...
View 9 Replies View RelatedMy Logitech Optical Laser USB Mouse has just recently begun turning on and off whenever it feels like it. I have used the mouse for years and all seemed good. I got a new laptop 5 months ago with Vista Ultimate 32 bit and the mouse worked fine, but a few days ago my laptop froze up and I was forced to hold down the power button to restart it. When it rebooted the mouse will work for a while then turn off for 3-5 seconds and then work again. Does this a few times every minute. I have 6 USB ports and tried the mouse in all of them but has the same problem. Tried the mouse on another computer and it works fine. Device manager says device is working properly and all latest drivers are alredy installed.
View 7 Replies View RelatedI have a Logitech optical mouse and I need it to be rt.click. Whenever I reboot, Vista Premium resets to default. It is o.k at the user window and almost at the end of the desktop b4 it resets. Vista also deletes my passwords in Outlook 2002/XP every bootup. But Vista Mail is untouched.
View 4 Replies View RelatedThis problem started a few monts ago. It is a simple MS wired (through USB) Scrolling Optical Mouse. It only works intermittently. I am using Vista Business on my ThinkPad T61.
View 8 Replies View RelatedI have a Microsoft optical mouse. It's a couple of years old and I'm trying to determine whether it's faulty or not. The problem seems to be with the scroll wheel. When on a webpage and using the wheel to scroll, often the page will continue to scroll (only another 50 or so pixels) after I've released the mouse. It seems to be at least a full second or two after I've finished scrolling, let go of the mouse then the page continues to scroll (only by one increment/decrement). It doesn't seem to be the wheel clicking into place either, as I first thought. I'm trying to find out if anyone else has experienced this and/or whether it could be a registry setting or something else causing this. Otherwise, it's a hardware issue.
View 4 Replies View Relatedmy optical mouse has started behaving erratically (moves around on its own a bit) have used tools to remove and detect conficker, updated avg regularly and install all the security updates, so.... seems like a virus but I don't know. Anybody can troubleshoot this issue? And What woudl be the best antivirus program- free, and the best purchased? also the best conficker detector. I mean this may not be a virus but still...
View 4 Replies View RelatedI Just want to know why my screensaver doesn't work using a Microsoft wireless laser mouse, also microsoft wireless keyboard, windows vista.
View 9 Replies View RelatedI have a Comfort Optical MS mouse, PC details in Rig Specs...
anyway, before installing intellipoint software, pressing the wheel button down, while browsing websites, enabled a circle on the pointer, where you could move the mouse up or down to scroll the site... now intellipoint has changed it to the 3D Flip... what is the previous action called? and how do i get it back if the option is not listed in the intellipoint drop down for available commands?
I have two identical monitors for one computer running Vista with two identical graphics cards. My arrow indicator jumps to the wrong monitor screen and is hard to return to the intended original monitor. Can the Microsoft Programmable Mouse, or other mouse, be programed with arrow indicator to left monitor/arrow indicator to right monitor switch? How? I have a Dell mouse now.
View 9 Replies View RelatedI just recently bought a laptop (HP Pavilion dv7-1267cl), a bluetooth usb dongle and a microsoft bluetooth mouse 5000. I connected the usb dongle and the computer recognize it without any problem. What I need to do to pair the mouse with my computer? I turned on the bluetooth on my cell phone an it found the mouse. So it means that the mouse is working properly.
View 4 Replies View RelatedUsers that have the Microsoft Wireless Laser Keyboard 6000 and/or the Microsoft Wireless Laser Mouse 6000 have been experiencing issues for the past few months with their screen saver failing to turn on as well as any power saving features. The problem was linked to the new 3.0 version receiver shipping with the new 6000 series mouse and keyboards and the media center components.Â
Microsoft has finally released an update for these users so that they can use screensavers once again in Windows Vista. Follow theses steps to get the update for your computer:
Click on the Start Button and type in Windows Update....
i recently got a new wireless Microsoft keyboard/Mouse combo. The mouse is too large for my hand. I do a lot of Photoshop and my hand is killing me, so I tried to install my old Logitec (comfortable) mouse. No go..I downloaded the newest Vista 64 bit drivers for both. The Microsoft keyboard has a stick-type USB. The Logitec mouse has a little USB thingie that sits on the desk. Only one of them will work at a time.I've tried every configuration I can think of and can't get them both to work at the same time. The thing is, when I got this new computer (with Vista) they both worked together fine..until I installed a new video card. Now they won't play nice together at all. The mouse hangs once in a while and akthough I have set it to be as precise as it can be..it
View 6 Replies View RelatedMaybe I could get an answer to my question that I should had asked when I was buying. This wireless mouse uses two "AA" batteries or rechargeable batteries. What about turning it off for the night or whenever I leave my computer? So that I don’t change them every two-three days.
View 7 Replies View RelatedUntil today, this mouse was working nearly perfectly. There was one incident when the mouse stopped working with my computer, and after a restart, it was fine. However, today it stopped working, and I restarted my computer only to find that my computer was now asking for a pairing number when I tried to connect the mouse. I have no clue what this mouse's pairing number is or why I would need it when it was working just fine earlier without one. I checked the bottom of the mouse to see if I could find a pairing number, but nothing was to be found, and I do not have the box or the items that came with the mouse.
How do I connect my mouse? Note: The mouse shows up when I search for bluetooth devices, but the problem arises from the fact that my computer now asks for a pairing number to connect the device, a number I do not have. In addition, it was working just fine earlier today, so I do not believe it is a software issue. If anyone could shed any light on this situation, I would be grateful. I'm at a loss of what to do.
I have a Dell 9400 series with Vista Home Premium Edition, and the mouse and keyboard are not working. I tried to change ports, wait until the system is up to plug them in, but nothing. I can not use F8, because the keyboard is not working. What can I do , please suggest, I do not know what to do.
View 9 Replies View RelatedI am having some problems with my mouse cursor, at first I thought it was my logitech wireless mouse and I got a different wireless microsoft mouse, and still have the problem. When I go to click on something, sometimes I have to click above it because it seems as if the mouse is not actually clicking where the cursor is.
View 9 Replies View RelatedToday suddenly my mouse stopped working properly. The mouse cursor stops moving then I hear the sound that hardware is removed from the system and immediately after the sound that hardware is added and then the mouse works again for a little while. This happens all the time. Mouse stops..hardware removed..hardware added..mouse works.
View 4 Replies View RelatedRunning Vista Home Ult 64. I have a USB mouse, which is listed in the DMgr as "HID compliant device". There are no drivers for the mouse, which is by Kingwin.
If I wake the computer with the keybaord, the mouse functions fine. If I wake the computer with the keyboard, the mouse no longer functions. Doesn't even function after a reboot. The only way to get it to function is to unplug it from it's USB port, and then back in again. Called ASUS, and they said I do have the right amperage coming from the PSU.
Ive got vista ultimate 64. With a standard computer. My problem is that I cant configure my mouse buttons. After I install the latest 64bit mouse driver, and click on the mouse icon to configure the mouse buttons, an error pops up that says - 'Some mouse settings might not work until you connect a Microsoft mouse to a USB port on your computer or set up a Microsoft mouse that uses Bluetooth technology'.
The problem is that I have a microsoft mouse that is connected to a USB port. The mouse works fine on my spare XP computer so its not the mouse that's faulty. I tried separate microsoft mice - wheel mouse optical and the intellimouse optical, both by microsoft and both have same issue.
I tried different usb ports and same happens. I tried the ps2 port and same happens.
I uninstallled all mouse drivers and reinstalled but no help. Basic left and right click works but cant configure the wheel button. It was working a week ago, but I went for a holiday and when I came back it was faulty. All vista updates are installed, security is the windows firewall, AVG free antivirus, and windows defender, but none of these have been a problem before
After having failed to install some program, mouse, precicely 'Double Click' stopped working, then I'm forced to use 'Open Page' by clicking intended icon, i.e. 'Word' by clicking and then 'open.' Also, 'Favorites' at the top, I'm NOT able to access any web-site because mouse/'clicking' does not work. 'Start' at far left bottom, if 'classic view,' mouse is completely useless.
View 4 Replies View RelatedI am having problems with erratic mouse movements that have occured since I acquired my new computer with Vista installed. I have tried re-installing the mouse drivers but it made no difference. After numerous attempts to download a hotfix provided by Microsoft that I thought might fix the problem (error code 40?), I eventually managed to get the hotfix installer to work only to be informed that it was not for my system!!! I have Windows Vista Home Premium 32-bit and a Dell Premium mouse.Has anybody else experienced this problem, and would they be able to tell me what they did to fix it? As you can imagine, working with the mouse is very frustrating - forget the intricate work!!
View 7 Replies View RelatedI'm sorry if this thread has already been sorted but I can't find an answer to my particular problem. I changed my keyboard and loaded the keyboard driver and since then the keyboard or mouse will not work. I switch on the pc it boots ok but as I said KB or mouse will not work. I shut down via power switch to force the pc to ask "start normally, safe mode etc" at this point I can use the keyboard, I then select any of the above, allow the PC to boot, and same problem.
I have tried to "Repair" with Vista disk but I have a Reminder program that is "ontop" so cannot get access to the Repair window because --- thats right KB and mouse will not work. Can you give me any help please on how to access the control panel, as I feel sure that if I remove the KB driver all will be ok. I have connected the KB for which I loaded the driver no go. Replaced KB with a no frills one, no go. I was using a wireless mouse originally and have changed that also to a basic one.
I've got a custom built pc- athlonxp 3000+ ,2 gb mem, Windows Vista home basic . The problem is the wired keyboard and wireless mouse aren't working. I swapped out the wireless mouse for a wired one and the problem stayed the same.
View 8 Replies View RelatedI dont know if im posting in the right area or if I should even post here with vista 32bit but im desperate to get this fixed. ok While I was trying to uninstall the drivers for my Zune I accidentally uninstalled my mouse and keyboard drivers as well. my USB mouse and keyboard work on startup but as soon as vista boots the mouse no longer recieves any power. I cant logon to any users because theres no way I can click on a user.
View 8 Replies View RelatedI recently purchased a Dynex wireless optical mouse for my laptop running vista. after installing the driver and software I can not get the mouse to work. When I physically move the mouse the light on the receiver blinks but the mouse does not move on the screen. I tried plugging the mouse into another system I have running xp and have zero problems. When I open device manager and look under universal serial bus controllers, the standard OpenHCD USB Host Controller says it does not have enough free resources.
View 5 Replies View Relatedstill playing around with the mouse trying to figure out how it works how to use or find the wheel and scrolling without pushing buttons at same time. Is there such a thing as plug in mouse for laptop?
View 7 Replies View RelatedNot really sure what genre this problem should be on. However i have recently purchased a Fujitsu Siemens Amilo Li2727 notebook. Working fine when i got it but i decided to use a usb mouse instead of touchpad now the touchpad has stopped working entirely even when usb mouse id plugged out. i really want to resolve the problem. i have already gone onto control panal, mouse but the touchpad does not come up as a device.
View 5 Replies View RelatedSometimes when i watch a movie in ect wmp or streams something on the net, then my mouse cursor often goes ape :s It turns in to a thin line or either it shows up like it has been in a blender because its messed up. Normaly it fixes with a reboot or if i am lucky then i can try click around a bit or open and close folders, then it turns normal again. I have a radeon 4800 1 gb ddram and i have tryed with uniblue, ccleaner, Seach and destroy. scandisk, defrag and clear temp folders. I tryed to update every single program and drivers, but i have a clue that it could be related to codex packs.. I use K-Lite newest. I tryed to remove and install K lite over and over, but this problems is still driving me nutz.
View 4 Replies View Relatedi have vista x64 it has been going fine for somthime.Until today i started it neither my mouse nor keyboard were working, I have a wireless usb mouse, i connected it to a extender so i could plug it in a ps2 slot. it was working well before, but now it stooped working. it works when when i put it in a usb plot. the keyboard is ps2.
View 4 Replies View Related