Running Vista Home Ult 64. I have a USB mouse, which is listed in the DMgr as "HID compliant device". There are no drivers for the mouse, which is by Kingwin.
If I wake the computer with the keybaord, the mouse functions fine. If I wake the computer with the keyboard, the mouse no longer functions. Doesn't even function after a reboot. The only way to get it to function is to unplug it from it's USB port, and then back in again. Called ASUS, and they said I do have the right amperage coming from the PSU.
I would like to put my wireless mouse in inactive mode during sleep mode. As it is an mouse movement, usually accidental, wakes up the computer. I looked for a way but couldn't find this facility.
I can put the pc to sleep with either the sleep button on the keyboard or the on-screen sleep button but when the pc goes to sleep the keyboard and mouse USB connections go to sleep too. leaving me with no way to wake up the pc! I have tried using Vista 64's built in drivers for the mouse & keyboard and also tried downloading and installing the Microsoft software for the keyboard & mouse. Same problem. the light on the keyboard and mouse both turn off when sleep is utilized. I've tried changing the settings in the Power Options to enable the power button on the pc to turn on sleep instead of shut down. It does put the pc to sleep but when I try to wake the pc from sleep with the power button the pc acts like it was completely shutdown and tries to do a full boot which then results in the windows screen saying it didn't shut down right, "start normally"?
The pc then starts as normal but how do fix the sleep problem? I have no problem with another pc with Vista Ultimate and 2 other pcs with MCE2005 and the sleep status. The problem pc has all the latest Window updates, current bios, latest ATI 64 bit drivers for the graphics card. One possibility might be that the graphics card is designed for the new PCIe 2.0 but the board is the older PCIe standard. The graphics card is supposed to be "backwards compatible" with older PCIe slots but now I wonder if that could be the problem?
After waking the PC each morning the mouse (MS Wireless Optical Mouse 2.0) exhibits poor scrolling. A significant amount of wheel rotation will result in a jerky and slow scroll. Before sleep it is perfectly smooth. I have tried disabling the power save option - no improvement. I am using the latest drivers from MS (6.31.230.0 dated 26/11/2008) Vista Business SP2.
The problem is that that wireless mouse does not work after the system resumes from sleep mode - I can use the mouse to wake the system but after the system resumes from sleep i am not able to use the wireless mouse - but after a hard reboot is done the wireless mouse works fine.
I have a very annoying problem with my Microsoft Wireless Intellimouse Explorer for Bluetooth. When after putting my computer in sleep mode the bluetooth mouse does not reconnect. The only thing I can do is pull the batteries out of the mouse and put them back in and only then it decides to reconnect.
I am running Windows Vista Ultimate 64-bit with the latest 64-bit MS Wireless IntelliMouse drivers. When logging onto the computer after completely shutting down the computer (not sleep mode) the mouse reconnects just fine.
I put my computer to sleep it immediatley wakes up without pressing any keys or moving mouse. Same with Hibernate... I press hibernate it starts saving all info shuts off (power light off) within 5 seconds it is starting up again.
For all you 680i users running Vista 32bit AND successfully using sleep mode, please post your settings here... "Successfully" means that:
1. Your system actually wakes up and none of your devices, such as mouse, keyboard, usb drives, bluetooth, and other devices, etc. are disconnected and/or malfunctioning...
2. In particular, are you still connected to the internet without resetting your network adapter (presuming you were connected before bedtime and presuming you're using the on-board NIC)
post your chipset driver versions and sleep mode settings... My settings are listed below and my system WON'T SLEEP "successfully"... bluetooth mouse and keyboard crash, and my internet connection is trashed:.....
ive got a 4gig usb plugged into my pc used as a readyboost because its just lying about so i thought id give it a job to do but it keeps waking my computer up when i put it in sleep mode but cant find an option to stop waking the computer up in the device manager unlike the network adapters etc ..so basicly how do i get it to stop waking my pc from sleep mode?
I am having a problem that started about 1 week ago with my password protection.I have absolutely no idea what I have done to cause the problem and have tried Googleing, but cannot find a solution.When I lift my lid on my laptop (whether it is plugged in or not)I have settings coordinated in a way so that I am prompted for my password for security reasons (obviously).I have the lid settings, set to 'sleep'(and have also tried 'hibernate' as well).All of a sudden the only time I am prompted to enter my password is on Startup. Checked all settings; tried hibernate (plugged in and unplugged) same as sleep and nothing worked.
Tried changing my password and also turning it off and on and still it is not working! I am the only one who uses my computer, therefore I am the Administrator. The concern is, anyone in the workplace can open my laptop lid and have full access to my laptop, as well as the sticky beaks at home. I am not familiar with drivers etc nor do I know how to figure out what versions of particular programs I am running, but if given steps can easily figure it out.
I have a Dell 9400 series with Vista Home Premium Edition, and the mouse and keyboard are not working. I tried to change ports, wait until the system is up to plug them in, but nothing. I can not use F8, because the keyboard is not working. What can I do , please suggest, I do not know what to do.
I am having some problems with my mouse cursor, at first I thought it was my logitech wireless mouse and I got a different wireless microsoft mouse, and still have the problem. When I go to click on something, sometimes I have to click above it because it seems as if the mouse is not actually clicking where the cursor is.
Today suddenly my mouse stopped working properly. The mouse cursor stops moving then I hear the sound that hardware is removed from the system and immediately after the sound that hardware is added and then the mouse works again for a little while. This happens all the time. Mouse stops..hardware removed..hardware added..mouse works.
Ive got vista ultimate 64. With a standard computer. My problem is that I cant configure my mouse buttons. After I install the latest 64bit mouse driver, and click on the mouse icon to configure the mouse buttons, an error pops up that says - 'Some mouse settings might not work until you connect a Microsoft mouse to a USB port on your computer or set up a Microsoft mouse that uses Bluetooth technology'.
The problem is that I have a microsoft mouse that is connected to a USB port. The mouse works fine on my spare XP computer so its not the mouse that's faulty. I tried separate microsoft mice - wheel mouse optical and the intellimouse optical, both by microsoft and both have same issue.
I tried different usb ports and same happens. I tried the ps2 port and same happens. I uninstallled all mouse drivers and reinstalled but no help. Basic left and right click works but cant configure the wheel button. It was working a week ago, but I went for a holiday and when I came back it was faulty. All vista updates are installed, security is the windows firewall, AVG free antivirus, and windows defender, but none of these have been a problem before
After having failed to install some program, mouse, precicely 'Double Click' stopped working, then I'm forced to use 'Open Page' by clicking intended icon, i.e. 'Word' by clicking and then 'open.' Also, 'Favorites' at the top, I'm NOT able to access any web-site because mouse/'clicking' does not work. 'Start' at far left bottom, if 'classic view,' mouse is completely useless.
I am having problems with erratic mouse movements that have occured since I acquired my new computer with Vista installed. I have tried re-installing the mouse drivers but it made no difference. After numerous attempts to download a hotfix provided by Microsoft that I thought might fix the problem (error code 40?), I eventually managed to get the hotfix installer to work only to be informed that it was not for my system!!! I have Windows Vista Home Premium 32-bit and a Dell Premium mouse.Has anybody else experienced this problem, and would they be able to tell me what they did to fix it? As you can imagine, working with the mouse is very frustrating - forget the intricate work!!
I'm sorry if this thread has already been sorted but I can't find an answer to my particular problem. I changed my keyboard and loaded the keyboard driver and since then the keyboard or mouse will not work. I switch on the pc it boots ok but as I said KB or mouse will not work. I shut down via power switch to force the pc to ask "start normally, safe mode etc" at this point I can use the keyboard, I then select any of the above, allow the PC to boot, and same problem.
I have tried to "Repair" with Vista disk but I have a Reminder program that is "ontop" so cannot get access to the Repair window because --- thats right KB and mouse will not work. Can you give me any help please on how to access the control panel, as I feel sure that if I remove the KB driver all will be ok. I have connected the KB for which I loaded the driver no go. Replaced KB with a no frills one, no go. I was using a wireless mouse originally and have changed that also to a basic one.
I've got a custom built pc- athlonxp 3000+ ,2 gb mem, Windows Vista home basic . The problem is the wired keyboard and wireless mouse aren't working. I swapped out the wireless mouse for a wired one and the problem stayed the same.
I dont know if im posting in the right area or if I should even post here with vista 32bit but im desperate to get this fixed. ok While I was trying to uninstall the drivers for my Zune I accidentally uninstalled my mouse and keyboard drivers as well. my USB mouse and keyboard work on startup but as soon as vista boots the mouse no longer recieves any power. I cant logon to any users because theres no way I can click on a user.
I recently purchased a Dynex wireless optical mouse for my laptop running vista. after installing the driver and software I can not get the mouse to work. When I physically move the mouse the light on the receiver blinks but the mouse does not move on the screen. I tried plugging the mouse into another system I have running xp and have zero problems. When I open device manager and look under universal serial bus controllers, the standard OpenHCD USB Host Controller says it does not have enough free resources.
still playing around with the mouse trying to figure out how it works how to use or find the wheel and scrolling without pushing buttons at same time. Is there such a thing as plug in mouse for laptop?
Not really sure what genre this problem should be on. However i have recently purchased a Fujitsu Siemens Amilo Li2727 notebook. Working fine when i got it but i decided to use a usb mouse instead of touchpad now the touchpad has stopped working entirely even when usb mouse id plugged out. i really want to resolve the problem. i have already gone onto control panal, mouse but the touchpad does not come up as a device.
Sometimes when i watch a movie in ect wmp or streams something on the net, then my mouse cursor often goes ape :s It turns in to a thin line or either it shows up like it has been in a blender because its messed up. Normaly it fixes with a reboot or if i am lucky then i can try click around a bit or open and close folders, then it turns normal again. I have a radeon 4800 1 gb ddram and i have tryed with uniblue, ccleaner, Seach and destroy. scandisk, defrag and clear temp folders. I tryed to update every single program and drivers, but i have a clue that it could be related to codex packs.. I use K-Lite newest. I tryed to remove and install K lite over and over, but this problems is still driving me nutz.
i have vista x64 it has been going fine for somthime.Until today i started it neither my mouse nor keyboard were working, I have a wireless usb mouse, i connected it to a extender so i could plug it in a ps2 slot. it was working well before, but now it stooped working. it works when when i put it in a usb plot. the keyboard is ps2.
My wifes machine, a desktop with a new mother board, has a mouse that jumps once in a while. It is driving my wife (and therefor me) I found a solution to this problem once and it did fix it but its back again. The original solution involved setting some security setting so that Vista did not make some check constantly during mouse movements and keystrokes.
I pressed the circle button with the vertical lline in Vista (from pressing Start) This sent the computer to sleep or hibanate I dont know which. I cannot get the computer to come back on. The monitor remains black (no picture) and says no signal. I have deprived the computer of power. This was achieved by unplugging it from the wall, and removing the power cable also from the computer.
I have tried restarting the computer but to no avail. I have also removed the keyboard and mouse when I try starting up. I have also tried, holding in the power button and then restarting. No matter what I try still no joy. No signal on the monitor. The lights in all cases come on, on the base unit and I can hear fans spinning etc. I have read about this issue in round about ways but all of the fixes seem to rely on actually being in windows.
When I put mouse cursor on start button, the start balloon does not show up.
Whenever this happens, my mouse left click does not work properly.
For example, if I click on internet explorer then the it opens however I can't click anything on explorer. The blue color on top of explorer turns gray and nothing happens.
When I do ctrl+alt+del to turn on task manager and click couple times on the task manager screen then it goes back to normal.
Of course first mouse click doesn't work. it is second click on task manager that will make it work properly.
I know this sounds so strange and unusual. But I'm just trying to explain the situation as best as possible.
I tried different mouse/ new driver and so on. It has nothing to do with mouse at all. I just thinking maybe something is running that prevent my mouse from working properly. I checked virus and adware and everything.
I even format the hard drive more than 5 times but same problem still exists.
Is there any way short of turning this blankety blank thing off that I can start programs on my own computer without having to click three times and issue two permissions every time? Heck, I even have to do that just to empty the recycle bin. That's incredibly a pain in the butt.
I've started to get some problems with bluetooth on my Dell Vostro laptop (running Vista Home Premium). Up until about 3 weeks ago my bluetooth mouse was working fine and I was able to connect to my phone via bluetooth. One day, the mouse stopped working and I wasn't able to reconnect through all the normal procedures. I initially thought it might be the mouse, so I got hold of another bluetooth mouse that is fine with my office XP computer.
I've even uninstalled and reinstalled all the bluetooth software and drivers from the Dell website, but no success. There is no reaction from the laptop when I switch the mouse and click the little button to start discovery. When I try to initiate a connection from my phone, a message pops up on the laptop saying 'a device is trying to connect, please click on this message'. I click on the message, but nothing happens. Has anyone got any ideas as to what the problem might be?
My mouse does not seem to be where it is actually visible. For instance when I want to close a program window I have to move around the x to close the program but am not acutally over the button. The accuracy of the pointer is out by half an inch. When I go into the control panel and select the mouse there is not option to calibrate the mouse. how to get my mouse pointer to be more accurate
I just installed this game but it stutters heavily and in the main menu i can't see the mouse. It isn't my system I have a AMD HD4850 an E8400 , even FarCry2 works perfectly. Can it be that this game isn't vista x64 proof??
