My mouse does not seem to be where it is actually visible. For instance when I want to close a program window I have to move around the x to close the program but am not acutally over the button. The accuracy of the pointer is out by half an inch. When I go into the control panel and select the mouse there is not option to calibrate the mouse. how to get my mouse pointer to be more accurate
View 8 RepliesIve got vista ultimate 64. With a standard computer. My problem is that I cant configure my mouse buttons. After I install the latest 64bit mouse driver, and click on the mouse icon to configure the mouse buttons, an error pops up that says - 'Some mouse settings might not work until you connect a Microsoft mouse to a USB port on your computer or set up a Microsoft mouse that uses Bluetooth technology'.
The problem is that I have a microsoft mouse that is connected to a USB port. The mouse works fine on my spare XP computer so its not the mouse that's faulty. I tried separate microsoft mice - wheel mouse optical and the intellimouse optical, both by microsoft and both have same issue.
I tried different usb ports and same happens. I tried the ps2 port and same happens.
I uninstallled all mouse drivers and reinstalled but no help. Basic left and right click works but cant configure the wheel button. It was working a week ago, but I went for a holiday and when I came back it was faulty. All vista updates are installed, security is the windows firewall, AVG free antivirus, and windows defender, but none of these have been a problem before
My wifes machine, a desktop with a new mother board, has a mouse that jumps once in a while. It is driving my wife (and therefor me) I found a solution to this problem once and it did fix it but its back again. The original solution involved setting some security setting so that Vista did not make some check constantly during mouse movements and keystrokes.
View 2 Replies View RelatedWhen I put mouse cursor on start button, the start balloon does not show up.
Whenever this happens, my mouse left click does not work properly.
For example, if I click on internet explorer then the it opens however I can't click
anything on explorer. The blue color on top of explorer turns gray and nothing happens.
When I do ctrl+alt+del to turn on task manager and click couple times on the task manager screen then it goes back to normal.
Of course first mouse click doesn't work. it is second click on task manager that will make it work properly.
I know this sounds so strange and unusual. But I'm just trying to explain the situation as best as possible.
I tried different mouse/ new driver and so on. It has nothing to do with mouse at all. I just thinking maybe something is running that prevent my mouse from working properly. I checked virus and adware and everything.
I even format the hard drive more than 5 times but same problem still exists.
This does not necessarily always happen but some times the mouse pointer jumps away to the top left corner area from where I click. Is there a remedy to stop this from happening?
View 9 Replies View RelatedI have just bought a new laptop with Windows Vista Home installed. I've noticed that my mouse pointer sometimes jumps around the screen by itself whilst I am on the internet. What could be causing this problem and how do I rectify it?
View 9 Replies View RelatedI recently had a power failure whilst working on my PC - I restarted it - but started getting problems - I have put both C and D drives through the Check Disk Utility. To all intends iand purposes the Pc appears to be workin, except:
1. The Mouse pointer has the `working in the background`i.e.the revolving circle which goes on for 5 secs then off for 1 sec and back to 5 secs etc.I have tried changing the pointer but to no avail.
2. I can not delete anything in the C/ directorory Program Files.
I have a Gateway Desktop model GM563E with a Vista Home Premium operating system. After installing Vista update 938371 released 4/8/08, my mouse pointer disappeared (while keyboard functions still worked). Changing mouse settings and installing a new mouse did not remedy the problem. I needed to do a system restore and remove the Vista update to make the pointer work again. Has anyone else had this problem?
View 5 Replies View RelatedI have Windows Vista Home Edition on my new laptop (Dell Inspirion e1530). My pointer disapears anytime i move it over an area that allows you to type. For example, it will not work at all in Microsoft Word. It appears over the toolbars and i can click on file, edit, etc, however when i want to edit an existing document or begin a new one the pointer will not show up on the page. It has basically been a trial and error click process until I find the place i want the cursor.
View 5 Replies View RelatedWhen watching moives my mouse disappears. If I use the CTRL key to locate it, the circle indicates but cannot get the mouse to return without shutting down.....powering off!
View 4 Replies View RelatedRunning Vista on laptop with 1.5 GB memory. When using internet explore the mouse moves around.
View 4 Replies View RelatedCan anyone help with a missing mouse pointer? It's on a Gateway laptop (notebook) and the default finger tablet shows no mousepointer and if I plug a USB mouse in, there is still nothing. Has something become corrupted? I have a dual boot on this laptop and can boot up win 2000 successfully with the mouse pointer working perfectly so at least I know that it is not a hardware issue. Can it be fixed without doing something drastic like a re-install? I tried starting with last known good configuration
View 4 Replies View RelatedThis does not necessarily always happen but some times the mouse pointer jumps away to the top left corner area from where I click or even when I do not click anywhere but moving the pointer to certain direction. Is there a remedy to stop this from happening?
View 4 Replies View Relatedbooted up my PC, typed in user name and password. Went on to Mozilla Firefox, about 10 or 15 minutes.... my laptop freezes. My mouse pointer cannot move, neither the programs. The only thing I could do, was the Windows Flip 3D (Win+Tab). My indicators (Power, Battery and Hard Drive) looked fine. So I shut down my PC.
I booted the PC, somehow... it failed. It had "Microsoft Corporation" and the loading bar, it was like that forever. I shut down my PC again and decided to go to Startup Repair and System Restore. It fixed the booting error, but my computer still freezes. This problem always goes on forever and ever. The worse place is to go is logging in as Administrator. But it does the same thing, except it also had blue screen of death. (KERNEL_DATA_INPAGE_ERROR). I booted in Safe Mode, and it does the same thing. I did chkdsk /f , startup repair and system restore. I haven't thought about restoring my PC to factory settings.
Windows Vista Home Premium SP1 with 4gb memory I have as my cursor 3D Bronze pointer. I went inside Control Panel/Mouse, chose Pointer Tab, Work in background and changed the icon to icon of drum beating. In the preview window, I can see the drum beating. When I press OK and exit. When I open some application, the drum icon would appear but without animation as though it is frozen. Does anyone know what might be the problem on why there is no animation?
View 4 Replies View RelatedI am having a problem with my mouse pointer. When I move the pointer/arrow over an "X" I have noticed that if I try to click on the "X" (or whatever the button may be for that matter) I have to actually move the pointer so that it is above what I want to select. The odd thing is though, that this is not always the case. Sometimes the poiner works just fine. I have noticed that this does not happen on just certain applications; for the most part it just randomly happens. It does consistently happen howver with the items shown in the tray at the lower right portion of my screen.
View 9 Replies View RelatedBack in the days I had time to be a Windows MVP, there were a lot of
questions I knew how to answer, but this wasn't one of them.
We have a Vista machine running Vista Ultimate. It is a Toshiba Tecra.
Within a few minutes of booting up, even in safe mode, the mouse pointer
drifts to one side, usually the right, and stays there. If you leave the
machine alone for a while, the issue goes away, but the moment a user starts
doing anything, the mouse becomes unusable in this way. I have tried exiting
all applications, and meticulously exiting every service whose function I
know is not a core Windows function, without avail. Windows Defender has not
found an issue.
Windows Vista Ultimate x64. Service Pack 2. Gigabyte GA P55A UD3. Intel i5 750 2.67 ghz
Powercolor Radeon 5850. These are what i am using,
I really can't understand why my vista pc wakes up the monitor when it resumes from sleep due to a scheduled task in the task scheduler. I expect logically that when Vista resumes form sleep due to a scheduled task the monitor stays completely off, that is it remains in standby mode, instead it turns on showing a black screen and the mouse pointer and the worst thing is that, even if i set an idle time for the monitor to turn off, it doesn't go to into sleep, that is if the scheduled task is running for one hour the screen remains on with black screen and mouse pointer for one hour!!!!
Windows Vista Ultimate 64 bit Service Pack 2 Gigabyte GA P55A UD3 Intel i5 750 2.67 ghz Powercolor Radeon 5850 These are what i am using, anybody else have the same issue?
View 4 Replies View RelatedMy girlfriend has recently (August 09) purchased a Dell Inspiron 15 laptop with Windows Vista Home Premium x64 edition pre-installed. Everything was absolutely fine for a week or so, but now whenever the computer starts up, it goes through the welcome screen etc in normal time, then the screen goes black with a mouse pointer (which one can move freely), for about 1 - 2 minutes. After these few minutes, the desktop loads perfectly fine. It would be okay, but it's a really new laptop and it's a little bit annoying. I've tried everything I can think of to sort it out, but I'm getting sick of it.
Here's a list of what I've tried: Had a play with services.msc (I'm not an idiot, I know what I'm doing). Had a play with the msconfig startup services to remove AVG watchdog. Tried to load 'last known good configuration'. Tried some bootup stuff. Installed some original Dell software which I had removed. There's still nothing and I'm starting to stress out. My girlfriend is at university now, and she's patient but it's not really fair on her to have to wait too long for her laptop to startup, because it's an amazing laptop!
Here are the specifications: Microsoft Windows Vista Home Premium 64-Bit Edition (Service Pack 1) Intel Pentium Dual Core CPU T4200 (2.0GHz) 4Gb DDR2 RAM ATi Mobility Radeon HD4570 (512mb Dedicated)
I recently bought a Dell Inspiron 530 running under Vista Home Premium. It was supplied without a monitor. I have tried it with two monitors, a small LG flat screen and a 20.5" widescreen Samsung. In both cases the mouse pointer is about 2 mm (1/8th inch) out of true so that when for example selecting files from a list in Windows Explorer it is easy to select the one below that intended. How do I synchronies the mouse pointer with the hotspots? An obvious answer is to contact Dell, but, if it comes to that, if there is some simple registry tweak in Vista, then hopefully I can fix it with kind guidance from this newsgroup.
View 6 Replies View Relatedwith no hand on my mouse, the pointer will begin to move around erratically usually in a small area. It is a cheapy optical made by Micro Innovations. Is it eh mouse's fault or something else in my system? I'm running Vista 64-bit Ultimate.
View 9 Replies View RelatedI just acquired what seems to be a really old PCIe ATI card that I can't seem to install correctly. I went to the ATI support site and the drivers for the card just don't seem to work. Is there a specific order to follow when installing a GPU -- sorry, its been a while. It doesn't go into a PCI slot but its the bigger one, looks like a big ole' AGP card but it has a sticker right on the card that says PCIe. I can only find the drivers for a Radeon HD2600XT and I'm not sure if those are the correct drivers or not. When I first installed it everything went well and it installed correctly but the XP hardware wizard wasn't satisfied. So it doesn't fully install -- note, I do not have the original discs -- but just need the most up to date drivers.
View 9 Replies View RelatedI have recently started to transition to Vista (dual booting with XPPro). One problem that I'm having is that my ergo mouse (EvoluentVertical Mouse) uses a driver that runs as an application, not aservice (I think). It has a tray icon, but that can be hidden via the options. The problem is that every time it's software runs at startup (the application launches via the Startup start menu group) the UAC kicks off and ask for consent for it to run. Normally you only see this when you install something or if you try to access a high level admin type tool, as I understand it.Is there some way to permanently consent to this application running at startup? If the application isn't running the mouse doesn't function properly. I tried using the compatibility option to have it run with administrator privileges, but that didn't make any difference.
View 9 Replies View RelatedQue tal foro, perdon por el [OT] pero me han solicitado una unidad DVD-ROM con esa caracteristica y segun busco con varios fabricantes, pues a 20x escriben pero lo mas que leen es a 16x, alguien sabe algo al respecto?
View 4 Replies View RelatedI've recently installed AoE3 on my computer and it works fine, I can start it and all that. Though then I ran into some trouble. I can't make home cities! When I click the "create-button" it freezes for a while and then I come to the menu which is supposed to let you handle your cards and all that. Though there is no city chosen, and when I try to choose one the only option I can click is create new home city. I simply don't get it. One would assume that it's something wrong with the game, and yeah. Of course there is, but I tried reinstalling it and that didn't resolve the issue..! Then I installed AoE: Asian Dynasties thinking that a later update might have a fix, but nope. Problem remains. This is really starting to get to me... I'm at a LAN and I'm the only Vista user you see, though I've had it installed on this computer before so...
View 9 Replies View RelatedI recently spilled something on my Microsoft intellitype pro natural ergonomic 4000 keyboard and, after letting it dry and all that stuff, it started to mess up the keyboard keys. Now, "f" types both "f" and "space" and vice versa, "o" brings up the "My favorites key assignment screen, "5" or "." brings up both a "5" and "." together and finally, maybe the worst, "comma" brings me to the last page I visited. (luckily, as I was typing this, I also found that the page is always exactly as I left it, so all the words I struggled to type so far are still there when I go forward in my browser history.) Now I play a lot of FPS games on this computer and this is very very irritating to me. Is there any way to fix this without buying a new keyboard all together? And here's what typing looks like for me without any editing: F or fgoodnessf sakes,f If thinkf myf keyboardf isf broken5.5.5. andf rememberf everyf "O"f goesf tof thef f avoritef f keyf listf andf everyf commaf goesf tof thef lastf pagef If wasf on5.
View 4 Replies View RelatedEvery time I try to shut down my computer I get an error message saying something like the application 0x______(different every time) referenced memory at 0x0000000 that could not be read. I have done disk clean up, it did not fix it. What would cause this and what can I do??
View 6 Replies View Relatedwhy [question mark] because they are not workin, when i push the left one it does this kLJFS; but puts it way back at the beginning of whatever i was typing and turns on my caps and when i push the right one it does this ][iOURW! and if i had words in front of that [i had to do that in another program to make it nt erase all this] it gives me this W! and erases a bunch of stuff infront of it. this is really driving me nuts and i cant figure this out, i cannot unplug the keyboard because this is a laptop. i just bought this laptop like 3 days ago and it has been working wonderfully up until now.
View 8 Replies View RelatedI am having a problem with Google Search. it has been this way ever since I got this new computer back in April. It does not do this on any "Search" but Google. I have Google as my home page. When ever I type something into the "Search" bar and click on search, it goes as it is suppose to, to the search results. If i go back to Google search and remove the former Search item and replace it with a NEW search term and hit search, it goes nowhere. it will not move. i have to X out of the Browser and then open up a new browser and then type in the term and it will go. This is strange as it does it on Google only. the Google toolbar will do the same thing. It really is annoying to have to x out of the browser and open another one for a different search term. I have never had a problem like this before.
View 7 Replies View Related