I really can't understand why my vista pc wakes up the monitor when it resumes from sleep due to a scheduled task in the task scheduler. I expect logically that when Vista resumes form sleep due to a scheduled task the monitor stays completely off, that is it remains in standby mode, instead it turns on showing a black screen and the mouse pointer and the worst thing is that, even if i set an idle time for the monitor to turn off, it doesn't go to into sleep, that is if the scheduled task is running for one hour the screen remains on with black screen and mouse pointer for one hour!!!!
My girlfriend has recently (August 09) purchased a Dell Inspiron 15 laptop with Windows Vista Home Premium x64 edition pre-installed. Everything was absolutely fine for a week or so, but now whenever the computer starts up, it goes through the welcome screen etc in normal time, then the screen goes black with a mouse pointer (which one can move freely), for about 1 - 2 minutes. After these few minutes, the desktop loads perfectly fine. It would be okay, but it's a really new laptop and it's a little bit annoying. I've tried everything I can think of to sort it out, but I'm getting sick of it.
Here's a list of what I've tried: Had a play with services.msc (I'm not an idiot, I know what I'm doing). Had a play with the msconfig startup services to remove AVG watchdog. Tried to load 'last known good configuration'. Tried some bootup stuff. Installed some original Dell software which I had removed. There's still nothing and I'm starting to stress out. My girlfriend is at university now, and she's patient but it's not really fair on her to have to wait too long for her laptop to startup, because it's an amazing laptop!
Here are the specifications: Microsoft Windows Vista Home Premium 64-Bit Edition (Service Pack 1) Intel Pentium Dual Core CPU T4200 (2.0GHz) 4Gb DDR2 RAM ATi Mobility Radeon HD4570 (512mb Dedicated)
when I wake up my eMachine t5234 by hitting return, it only displays a black screen. I know the monitor is on because when I turn off/on the power switch it displays the Acer logo but then goes black again. I have to restart my computer using the power button and then it displays properly. It was previously waking up fine.
Everytime I return to work after putting computer to sleep, the computer wakes up without no problem. But once I move the mouse, a shadowed box appeared. With the moment of the mouse, the size of that box enlarges or shrinks. If I click on the mouse, that box disappeared but then a window [View/Sort by/Refresh/NVIDIA Control Panel/New/Personalize] opens. I close this window, only to find the pointer of mouse stop working and the screen is frozen. For now I solve the problem by two ways described below, but it is very annoying to have to do it everytime I return to work from Sleep.
1.I open Task Manager, do nothing, and close it.
2.I right click the mouse on desktop, change the size of Icons. Repeat this action one more time.
Hey my names Mike and at the moment i have an HP Slimline with Vista Home Premium. (Vista Home Premium was already installed when i bought it) So heres my problem- I bought my comuter a couple months ago and its been working great. But a couple days ago whe i was trying to set up a webcam with software, i was told to restart my computer. fine. Though afterwards when it was booting up and after the Windows logo apeared it said Welcome and then went black with only my mouse cursor.
Im not to tech savey so i'm not to sure what im doing. Ctrl+Alt+Delete does work. Safe Mode Works also (Not really sure what to do in Safe mode though) Also im not sure if it's the new software or a malfunction in my computer but I've tried several times to restart it with no success. I've also tried a system restore with no success either.
A few days ago i tried turning my computer on and it jsut kept restarting it self, with quick BSOD every time it boot. Ive had this problem b4, I fixed with repair.(this time the repair disk wasnt on me, i downloaded 1, if this is the case i will try the real one at my dads house) But this time when i try enter vista repair It shows black screen with a mouse.
Vista SP2. I close the cover, the machine is sleeping, everything looks good. Move the mouse, it wakes up and starts running with the cover still closed. Any known fixes? I do want the mouse to be able to wake the machine, but it should not do it with the cover closed.
I put my computer to sleep it immediatley wakes up without pressing any keys or moving mouse. Same with Hibernate... I press hibernate it starts saving all info shuts off (power light off) within 5 seconds it is starting up again.
This does not necessarily always happen but some times the mouse pointer jumps away to the top left corner area from where I click. Is there a remedy to stop this from happening?
I have just bought a new laptop with Windows Vista Home installed. I've noticed that my mouse pointer sometimes jumps around the screen by itself whilst I am on the internet. What could be causing this problem and how do I rectify it?
I recently had a power failure whilst working on my PC - I restarted it - but started getting problems - I have put both C and D drives through the Check Disk Utility. To all intends iand purposes the Pc appears to be workin, except:
1. The Mouse pointer has the `working in the background`i.e.the revolving circle which goes on for 5 secs then off for 1 sec and back to 5 secs etc.I have tried changing the pointer but to no avail.
2. I can not delete anything in the C/ directorory Program Files.
I have a Gateway Desktop model GM563E with a Vista Home Premium operating system. After installing Vista update 938371 released 4/8/08, my mouse pointer disappeared (while keyboard functions still worked). Changing mouse settings and installing a new mouse did not remedy the problem. I needed to do a system restore and remove the Vista update to make the pointer work again. Has anyone else had this problem?
I have Windows Vista Home Edition on my new laptop (Dell Inspirion e1530). My pointer disapears anytime i move it over an area that allows you to type. For example, it will not work at all in Microsoft Word. It appears over the toolbars and i can click on file, edit, etc, however when i want to edit an existing document or begin a new one the pointer will not show up on the page. It has basically been a trial and error click process until I find the place i want the cursor.
When watching moives my mouse disappears. If I use the CTRL key to locate it, the circle indicates but cannot get the mouse to return without shutting down.....powering off!
Can anyone help with a missing mouse pointer? It's on a Gateway laptop (notebook) and the default finger tablet shows no mousepointer and if I plug a USB mouse in, there is still nothing. Has something become corrupted? I have a dual boot on this laptop and can boot up win 2000 successfully with the mouse pointer working perfectly so at least I know that it is not a hardware issue. Can it be fixed without doing something drastic like a re-install? I tried starting with last known good configuration
This does not necessarily always happen but some times the mouse pointer jumps away to the top left corner area from where I click or even when I do not click anywhere but moving the pointer to certain direction. Is there a remedy to stop this from happening?
booted up my PC, typed in user name and password. Went on to Mozilla Firefox, about 10 or 15 minutes.... my laptop freezes. My mouse pointer cannot move, neither the programs. The only thing I could do, was the Windows Flip 3D (Win+Tab). My indicators (Power, Battery and Hard Drive) looked fine. So I shut down my PC.
I booted the PC, somehow... it failed. It had "Microsoft Corporation" and the loading bar, it was like that forever. I shut down my PC again and decided to go to Startup Repair and System Restore. It fixed the booting error, but my computer still freezes. This problem always goes on forever and ever. The worse place is to go is logging in as Administrator. But it does the same thing, except it also had blue screen of death. (KERNEL_DATA_INPAGE_ERROR). I booted in Safe Mode, and it does the same thing. I did chkdsk /f , startup repair and system restore. I haven't thought about restoring my PC to factory settings.
My mouse does not seem to be where it is actually visible. For instance when I want to close a program window I have to move around the x to close the program but am not acutally over the button. The accuracy of the pointer is out by half an inch. When I go into the control panel and select the mouse there is not option to calibrate the mouse. how to get my mouse pointer to be more accurate
Windows Vista Home Premium SP1 with 4gb memory I have as my cursor 3D Bronze pointer. I went inside Control Panel/Mouse, chose Pointer Tab, Work in background and changed the icon to icon of drum beating. In the preview window, I can see the drum beating. When I press OK and exit. When I open some application, the drum icon would appear but without animation as though it is frozen. Does anyone know what might be the problem on why there is no animation?
I am having a problem with my mouse pointer. When I move the pointer/arrow over an "X" I have noticed that if I try to click on the "X" (or whatever the button may be for that matter) I have to actually move the pointer so that it is above what I want to select. The odd thing is though, that this is not always the case. Sometimes the poiner works just fine. I have noticed that this does not happen on just certain applications; for the most part it just randomly happens. It does consistently happen howver with the items shown in the tray at the lower right portion of my screen.
Back in the days I had time to be a Windows MVP, there were a lot of questions I knew how to answer, but this wasn't one of them.
We have a Vista machine running Vista Ultimate. It is a Toshiba Tecra. Within a few minutes of booting up, even in safe mode, the mouse pointer drifts to one side, usually the right, and stays there. If you leave the machine alone for a while, the issue goes away, but the moment a user starts doing anything, the mouse becomes unusable in this way. I have tried exiting all applications, and meticulously exiting every service whose function I know is not a core Windows function, without avail. Windows Defender has not found an issue.
Windows Vista Ultimate 64 bit Service Pack 2 Gigabyte GA P55A UD3 Intel i5 750 2.67 ghz Powercolor Radeon 5850 These are what i am using, anybody else have the same issue?
I have a problem with this graphic card, when I run a game with better graphic details. My computer freeze for 2-5 second, next is black screen for 2seconds(as monitor is shuted down) and next is black screen while i don't stop the game. Next I see this-> I hope that you solve my problem(and see that image) BTW: if this problem was solved on this forum sorry, but on system instantForum i was never been and i don't know how it control. Or if this post is in bad category please send message for me when you move it.
I recently bought a Dell Inspiron 530 running under Vista Home Premium. It was supplied without a monitor. I have tried it with two monitors, a small LG flat screen and a 20.5" widescreen Samsung. In both cases the mouse pointer is about 2 mm (1/8th inch) out of true so that when for example selecting files from a list in Windows Explorer it is easy to select the one below that intended. How do I synchronies the mouse pointer with the hotspots? An obvious answer is to contact Dell, but, if it comes to that, if there is some simple registry tweak in Vista, then hopefully I can fix it with kind guidance from this newsgroup.
with no hand on my mouse, the pointer will begin to move around erratically usually in a small area. It is a cheapy optical made by Micro Innovations. Is it eh mouse's fault or something else in my system? I'm running Vista 64-bit Ultimate.
Not terribly important (I can liev with black & white icons), but annoyance indeed and only started recently. It does NOT affect WindowsExplorer/Filemanager icons for folders, files, etc. Those have been and are fine 100%. Just the mouse right-click, now shows weird black&white icons, icons themselves are OK, colors are not. Difficult to see quickly what to click as I used to know by color what is what. For example right-click on empty space in Windows Explorer and select "new text Document" - the icon for it is a very bleak, black & whit eone. Use to be vivid greenish/bluish.
I am building a new system and have a new copy of Vista Home Premium 32bit.
I got it all put together and tried to load Vista. It got to the Windows is loading files screen and then screen in getting black video. Keyboad and mouse stopped working at times. So I updated the board BIO's per intel through iso image and same thing. So I tried installing XP and got to the F8 screen to accept lic. and it just reboots everytime.
Any ideas why Vista would stop? Added the info about the XP install so it may help.
I have recently bought a new PC running Windows Vista Home Premium. I have loaded the above programs for my son and when they a running the screen is not centred and the is a black bar to the right of the screen approx 3 cm wide. I have tried to run the games in compatibility mode and as adminstrator as recommended with other games but with no success.
I am having a very wierd issue with vista's screen saver. So basically when I leave the comp idle it goes into screen saver then turns off the monitor after 15 mins. Sometimes, more often than not, I come back and move the mouse and hit a few keys on the keyboard and nothing. The monitor wont come out of standby I try turning it off and back on, and nothing. I have the latest drivers for everything in my system and I checked the power management settings and they both are able to wake the computer up. I have a G15 keyboard and I keep the leds on and when this happens the leds are off and the lazer for the mouse is off too.
