I'm new to Vista and all ready messed it up :-(The cleartype factory setting was actually very good, but as the geek I am I thought that I could improve it by using the Microsoft online cleartype tuner.... I was wrong - I've tried all the possible 16 settings but none of them worked very weel and now I can't find a way to reset my cleartype to factory setting
View 5 Replies
We've bought an HP 2710p tablet and built up the pre-installed Vista Business OS to work on our network. putting domain, installing bespoke software, taking the pre-installed crap off, etc. A user had it and was working fine for a few weeks and his story was that it was running low on battery, so he plugged it in, then went away for a bit. He comes back and finds the thing re-installing itself to factory settings!
I found that hard to believe, but upon taking re-possession of it, that's exactly what's it done - seemingly no questions asked! A crash is one thing, but a complete automatic factory recover! Have to say we're not best pleased. Why would it do that and how do i stop if from doing anything on its own terms again?
I just restored my Dell Inspiron to it's original factory settings. It has Vista Home 32 bit. I got the "Reset was succesfull" screen. Now at start up I get my user name (there was always only one user acct.) and when I type my password it does not accept my password. It may be possible that when I purchased the computer three years ago I used a different password and then changed it and have just orgatten that I did that but I doubt it. Should I just throw this thing away or is ther any solution to get past the welcome screen?
View 4 Replies View RelatedI was recently given a Medion desktop pc (its a second hand one), and i want to recover it back to factory settings. I got nothing with the pc, no disks or anything.It has one HDD which is partitioned into two drives, one of which is called "recover" and contains what i assume to be files that will reset the pc to factory settings and install all of the orginal content again. This drive has no .exe file in it, or any other file extention that i can do anything with. The appears to be no program that i can find that will recover the pc.
how i restore it factory settings? Confused_ms p.s. The DVD-rom is not working at the min, so even if i did have a disk i wouldnt be able to use it. p.p.s. The pc has 2.8ghz processer (pentium D), 250gb HDD, 1GB RAM, Vista home prem OS Btw, the pc also has no internet connection, however i do have another computor so i can download things and transfer them over. (i cant set up my internet connection because they drivers i need to run the wireless adapter are on a CD and i currently cant run Cd's) edit: I think i might be making progress (assumin im heading on the right track?), when i press F10 during start-up i get the following come up on screen: EDIT BOOT OPTIONS Edit Windows boot options for: Microsoft windows Vista Path: windowssystem32winload.exe Partition: 1 Hard Disk: cb352c78 [ /NOEXECUTE=OPTIN ] Then is says ENTER=submit ESC=Cancel Now am i right in thinking that the partition needs to be changed to 2? if so how to i do it, becasue it wont simply let me change it as the only thing i have acess to is the bit in [](thats the only bit i can change or type in).
I was having some issues with my pc and it was long overdue for a reinstall anways, so I set it back to factory settings. Here is a list of my issues so far since..
1. Won't recognized my 9600gs - Keeps saying their is just an avg card their.
2. Downloads are corrupting. Video drivers, Firefox, Googlechrome, etc.. all get a corruption error when trying to install.
3. Some of my windows updates are getting errors to.
A. Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86 Download size: 17.1 MB - 55.6 MB
B. Update for Windows Vista (KB950124) Download size: 15.8 MB
C. Internet Explorer 8 for Windows Vista Download size: 23.5 MB
Only changes I have made is upgrading to a 9600gs with the hardware specs, otherwise you can find my pc specs at this link. Newegg.com - HP Pavilion M9040N(GN553AA) Core 2 Quad Q6600(2.40GHz) 3GB DDR2 640GB NVIDIA GeForce 8400 GS Windows Vista Home Premium
I don't know what I clicked, but my vista settings changed and I no longer have the little previews when I hover over the buttons on my bottom bar thingy, and my windows are no longer semi-transparent. Does anyone know what to reset or change to get these things back?
View 5 Replies View RelatedMy company has a fax shared on one of the 2003 servers. When I print to this fax server in Windows XP the Fax Wizard walks me thru all the necesarry screens and remembers my Delivery Notification settings, i.e. whether I want a notification, the email address I want the notification sent to and the attach a copy of the fax to the notification.
All of these settings I can find in the XP Registry at HKCUSoftwareMicrosoftFaxUserInfoReceiptEMail(dword), ReceiptAttachFax(dword) and ReceiptAddress(string). However, I cannot find these same settings in Vista Registry. I can set these each time I send a fax in Vista under ToolsOptions, but it is a pain to have to set these everytime I send a fax in Vista. Where can I find the equivalent Vista Registry values?
I'm trying to set up a new email account have followed the instructions all ok until it gets to the email server names for incoming and outgoing mail. how do I find out my email server names?
View 4 Replies View Relatedincoming e-mail server type and outgoing e-mail server how do i find this
View 9 Replies View RelatedI have forgotten the Username and Password for the Login ID... and it is not the default (Username: *blank* Password: admin). I have heard you can hold the reset button on the back of the wireless router but will this reset my wireless network? By that i mean... will i be able to connect with my laptop still through that wireless network or will i have to set it up again?
View 9 Replies View RelatedIt has happened occasionally, but with no predictability that I can see. I change settings in control pannel / power settings / balanced to 10 min for monitor and never for computer. I check the "advanced settings" to assure that they are the same. I use balanced because that seems to be the default in the registry. I do not see the actual settings in the registry. Every so often Vista resets the settings back to 20 min for the monitor. I have looked at but it speaks of "System Settings page" - I don't know what that is. In any case, my settings have no effect and I can't get the monitor to dependably go to standby after 10 minutes.
View 7 Replies View Relatedok im tryimg to restore my dell inspiron 1525 laptop to factory settings.(also i run vista home premium 32bit). I have tried the f8 advancted options and people say i should see a command to restore to factory settings but it dosent show up for me. can anyone help me out
View 7 Replies View RelatedI have made a mistake and I am struggling to get out of this mess, I hope Shawn or someone who experienced this problem can help me out.
I was doing the Factory state recovery using Alt+F10 while booting in my Acer Aspire laptop, everything was fine until the "Acer Launch" window appeared. The last process Install eRecovery solution is not completing. The AL window just sitting in the middle of the screen and couldn't be moved. I tried to disable it from startup, msconfig window vanishes behind the Acer Launch window.
I think the cause of this problem is I forgot to create the 2nd(D: data) partition prior to starting the Recovery process.
My original set up was like this:
EISA hidden partition
C: system partition
D:data partition
I have deleted the D: partition and extended the C partition
I have created Recovery disc but I don't have Vista installation DVD as my machine is OEM version of Vista on it. I do have an Anytime upgrade DVD which came with the laptop when I bought.
I had a HP PC running windows vista home basic, it crashed and was not able to boot in vista. Startup repair or safe mode did not work, so inorder to save data I installed vista business on top of it. The data is recovered and now when I try to boot to the factory restore it does not work, noticed in msconfig under boot.ini tab there is no boot record to the factory restore partition. Is there a way I can add in the record so that If I press F11 my PC will boot into the factory restore partition?
View 8 Replies View RelatedMy laptop is Dell inspiron 1420, home premium 32 bit. It's about 5 months old. It came with :-
1.) OS reinstallment DVD
2.) Dell Drivers and Utilities disk
3.) Microsoft Works 8.5 disk
4.) Trend Micro Internet Security ( but I have changed to McAfee since)
It's only 5 months ago that I learned how to use computer by reading and asking questions. So please be step-by-step in showing me how to.
How do I restore the computer back to the factory defaults?
View 8 Replies View Relatedmy computer keeps locking up betweenpages and sites also having problem with typing letters keep falling off words in sentence not sure weather 1 has anything to do with other--Question if i go back to factory settings what would happen to my upgrades and other stuff thaks Linda
View 7 Replies View Relatedwhen i type a document in microsoft and it pops up type your key numbers in i typed them in from under my laptop they dont match i contacted hp but they never get back to me what should i do i think the wrong sticker was put on in the factory overis seas
View 6 Replies View RelatedWill this option restore your Registry? And all of the factory drivers and programs. I had a virus and I think my registry is screwed up.
View 6 Replies View Relatedmy D drive is in red and apparently full. i am not getting the warning sign yet but was curious if I can somehow just delete this drive. yes i know that it is a recovery drive. we do have a recovery disk handy. when i click on it it says "warning this area of your hard drive comntains files used for your PC Recovery. Do not delete or alter....." so if I were to delete it will is mess my computer up? do i really need to back it up to a cd since i already have a recovery disk? is there a way to just keep the drive but not have the full red bar there?
View 4 Replies View RelatedI purchased a HP Pavillion DV2222tx laptop computer that came with Windows Vista Home Premium installed on it. I then purchased Vista Business and installed without making a backup/recovery disk. I now want to put it back to it's factory condition and get Vista Home Premium back on it but can not seem to find how to do it. There is still 4.46GB of HP_RECOVERY on D:/ that you can not see what is on it. How get it back to factory. I have tried pressing F11 repeatedly on startup - that did nothing, tried repeatedly pressing F8 as well - couldn't work that one out and just do not know what to do now. When I installed Business it has taken away the Recovery Manager and I don't know what to do.
View 4 Replies View RelatedI tried running my HP Recovery Manager a couple of days ago and it kept freezing around 77% so I talked to someone at HP and they said I needed the recovery disks, so I ordered them. I tried using them today and HP Recovery manager freezes at 33% during the re-install process. Why is it doing this? It's driving me crazy.
View 4 Replies View RelatedI have a Dell insperon 530S. I think its time for a factory re-install. I am confused about how to save all my doc's, music, pix, etc before I do this. The kids use I-tunes, I have folders of music in different formats ( I think), we have Kodak and Olympus picture folders, old email in two different identities, and on and on. Is there a step-by-step on how to do this correctly, so I don't lose stuff and I am able to find and save everything I need? I'm figuring I will burn everything to a DVD or two, but I don't know....
View 4 Replies View RelatedI am using a HP Pavilion dv6000 running Windows Vista Home Premium. My computer has numerous problems: it won’t load certain websites, windows updates won’t work, I can’t load or re-download windows defender, I can’t download software from Microsoft.com…..and so on and so on. I have searched and searched the internet and tried many solutions from many different forums with none of them working. My last resort is to restore the system to factory settings however that too presents a problem. The files in my HP_Recovery drive have been deleted and the recovery disks that I created were lost when I moved. I know it’s a long shot, but is there any way I can restore my system to factory settings without the HP_Recovery partition or recovery disks?
View 6 Replies View RelatedI need to do a complete factory reset on my Gateway. The restore discs that Gateway sent me no longer work (I've had to factory reset previously) and the OS disc that Gateway sent me isn't reading in my T-6835 laptop. Since I reset my hard drive previously, I don't have Gateway Recovery Manager. I do have a recovery partition though, but I can't access it for some reason or another. I have tried tapping alt + f10, f10, and r at the beginning but to no avail.
View 5 Replies View RelatedAnyway, can the recovery created disc you make at first use of your pc, restore your computer back to the factory defult after you do a complete clean install of another OS? Say, I go from the Vista premium 64bit that was installed in the laptops stock form, to Xp 64bit from a offical OS disc, back to the Vista 64bit factory install.... lol follow that? It sounds way better inside my head then it sounds read out loud. Maybe thats where it should of stayed...?
Also, the Vista key that is used on my laptop from the factory installed OS, can it be used If I were to try and use the same OS to do a clean install, but from an offical cd? Basicly, would my key that I am currently using, work if I use it on a OS disc install? I just want to make sure I can get this thing back to "fresh out the box" stands if need be. For the windows 7 update, or to return shortly if I can not get issues resolved on my own.
I have used my HP m7763w with Vista Home Premium for more than 2 years now, and finally got to the point of having to use my rescue CDs to reformat the HD and reset to factory setting. Unfortunately, I get frequent error messages now, and missing file notices, and Windows Update refuses to work. I understand that the old factory settings are way outdated by now, but what am I supposed to do to get it all working right, if Windows Update fails?
View 6 Replies View RelatedA few weeks ago my computer died from a windows update it automatically did, i managed to get back onto the computer by booting my OS disk to save my files and now i need to completly restore my computer back to factory settings. I Don't want to restore it back to a certain point, or repair my system as i log on, which is all i seem to be able to find in other posts, i just want to completly restore it back to day 1. F11 doesnt work when i turn my computer on (yes im doing it right and ive tried it LOTS of times), F8 brings up a screeen i dont want, booting from teh OS disk just boots the pc normally and alt F10 doesnt seem to be bringing the page that i need up, just an editing page.
View 5 Replies View RelatedEverytime i turn my computer on i get the blue screen of death i can't restore to factory defaults by CTRL+F11 or from CD... Last known good configuration doesn't work neither.
View 4 Replies View RelatedThe tech at HP told me that I need to use the exact same hard drive (Fujitsu 120G) that came with the notebook originally to use the recovery disks to reinstall Vista. Is that true? I wanted to use a Western Digital 160G HD instead.
View 9 Replies View RelatedI had to do a disc recovery which took me back to factory settings. Most things are required to be set up from scratch. Do I have to set up my e-mail account all over again?
View 5 Replies View Related
