Wireless Card Stops Function After Sleep In Windows Enterprise SP1
Mar 31, 2008
I have some Dell laptops (d830, d620, d630) that has problems with the wireless networkcard (Intel Wireless 4965 AGN). Very often it stops to function after the computer has been to sleep. The wireless icon still apears in the bottom right corner with a red cross over it. When you click it it says that it's connected with limited access. The wireless card will not apear when you run ipconfig If you disconnect it will not connect successfully again It seems like it manages to find all availble networks, but you can not connect successfully to any of them.
I have tried to install this fix reagardless that I already have SP1, but this won't install. Probley because it has already been applied. Also tried the Regedit workaround mentioned in the KB. I have set the power option to high preformance, but it still happends when the computer is manual set to sleep.
View 6 Replies
ADVERTISEMENT
Sep 27, 2008
Occasionally when I use the Sleep function I am unable to open the screen again by hitting a key. I've had to manually shut down and reboot. I then get a message that the Windows was improperly shut down. Has anyone else experienced this?
View 2 Replies
View Related
Jan 19, 2010
I recently upgraded my OS from Vista Home to Ultimate (a clean install). It seems as though after I have been using the internet for a while or if I am using too much bandwidth (downloading a few things or have a couple windows open) my wireless stops. I have access to the network - just the actual wireless internet stops. I can't use the diagnose feature by right-clicking as it never has a solution that actually fixes it - I've tried them all. We have several other computers in the house and they don't have problems with it - it also happens when I'm at work as well. When I attach the computer directly to the modem (even while this problem happens) the internet works fine.The only fix is restarting - but that's quite annoying and happening often. I have downloaded the newest drivers for this computer from HP (its a DV9200 CTO pn: EZ345AV) and I can't figure it out.
View 8 Replies
View Related
Mar 23, 2008
My Dell 8400 had XP. We upgraded to Vista a month ago. No problems with the
wireless network card. (Netgear WG311 v.3)
HOWEVER - we decided to purchase more RAM for the pc. We called Dell to
purchase the RAM so it would be compatible. We had two 512MB cards in dual
slots. We ordered two 1GB cards to place in the remaining dual slots. That
gives us 3GB of RAM. Vista maxes out at 4MB according to what was sent to me
by NetGear.
The problem is that if we use all four slots, the network card stops
working. If we use two 1GB cards in dual slots, the network card works fine.
If we use all four slots, the network card stops working. We changed the
cards around so the 1GB cards were in one set and the 512MB cards in another
set. We had them paired each time, so that was not the problem.
We ordered two more 1GB cards with the thought that because the four we had
were not quadruplets, that might be the problem. It isn't. Dell took back
the extra RAM.
Dell support blames the problem on NetGear. NetGear blames the problem on
Vista. The technician at NetGear sent me a kb of Vista limits for RAM. When
I replied that we hadn't maxed out on RAM, I got an email that the email I
sent in reply couldn't be delivered.
View 9 Replies
View Related
Mar 16, 2009
I am running Vista Home Premium on my laptop. I have a Brother wifi printer (although it connects to the router with a wire). I have 2 desktops and my laptop that use the printer. The two desktops use the printer without a problem. My laptop only works during the period after I add the network printer. When I reboot, it will seem to print to the printer but it just gets stored in the printer queue and won't print it.
Telling the print queue to try again doesn't do anything. If I delete the printer from my laptop and add it again as a new printer, it works great until the next reboot. I have no other printers in my printer list, only the Brother. None of the desktops (one Vista Home Premium, one XP) have this problem.
View 5 Replies
View Related
Mar 26, 2009
Everything works just fine on my new Vaio laptop running on Vista home premium, connecting to my wireless network TalkTalk (the router is Echolife HG520s), until the connection stops working but still says I'M CONNECTED PERFECTLY!
I thought it was a typical firewall problem so i tried with disabling Windows firewall and the mcafee security center but nothing seems to work except disabling the network hardware and enabling again.
View 5 Replies
View Related
May 28, 2008
I have a new Dell computer running Vista Home Premium. My Brother printer prints fine when hooked up via USB. But won't print wirelessly through my router (Airport Express). The computer recognizes the printer wirelessly and has it as "ready." When I send something to print, it starts printing the first few lines and then just stops and won't print the rest. If I try again, nothing happens at all. I have to uninstall and reinstall the printer to get it to do anything. And even then, it won't print more than the first few lines of the document. Had no problems printing wirelessly with this printer and router on my old Dell that ran XP.
View 7 Replies
View Related
Oct 27, 2009
If I let my computer sit for roughly 1 hour or more the mouse stops working and I have to restart the computer via the keyboard. I've tried reconnecting from the transceiver and switching the mouse on/off and pressing the reset button. None of these things seem to do the trick.
View 5 Replies
View Related
May 29, 2008
When I try to activate my newly installed Windows Vista Enterprise an error message appears saying: DNS-naam bestaat niet. (in English DNS-name doesn't exist). So I'm unable to activate my Windows Vista. This may result in problems within 3 days.
My vista license is a MS-KISS license.
View 9 Replies
View Related
Mar 23, 2008
when my laptop goes to sleep, the network connection is lost, is there any way i can stop i from doing this so that i still have access to my home network when it is in sleep mode.
View 9 Replies
View Related
Aug 21, 2008
I've got a production network that I'm test Windows Vista x64 Enterprise on. I'm at my witts end with this problem: I add the Vista PC to the Windows domain. The computer performs the tasks and then tells me it needs to reboot. Upon rebooting it immeadiately drops itself from Active Directory (Windows 2003 SP2 R2 based domain).
Oddly, the computer account in active directory is still there. The Vista client drops itself, but the server side thinks everything is fine. What the heck is causing this? There are no issues with IPv4 connectivity. (We don't use IPv6...) The server shows that the PC and the users are connecting to the domain securely, and without issues (pass security audits). The Vista Client (Enterprise x64) just drops itself from Active Directory.
View 5 Replies
View Related
Dec 5, 2009
My laptop has the same problem. I think it's something to do with the internet because when switch my wireless off it's going to sleep like it should be. If I'm connected to the university wireless it's waking up immediately. The same if I'm using the LAN cable. I suppose you guys will know what exactly causes it to wake up and tell me what to do so it wont be necessary always to switch wireless off when I want to put it to sleep.
View 5 Replies
View Related
Mar 23, 2008
I'm really frustrated at this and feel I've tried everything. I've been searching all over the internet for help but to no avail - nobody seems to have this specific problem. I have just bought a new Sony Vaio VGN-NR11Z/S (2 GHz Processor - Intel Core 2 Duo T2750; 2 GB RAM; Windows Vista Home Premium 32-bit Version). It has an integrated wireless switch on it and is running windows Vista. These two things don't seem to agree with each other. I boot up the laptop and the wireless connection works fine, I connect to the internet straight away. I then put it to sleep in the way I used to using standby on XP (closing the lid basically). When Vista comes out of sleep mode I find that I can't connect to the internet, and the little light on the wireles switch is off.
I diagnose the problem and it tells me to turn on my wireless switch, which is odd as it is already on. The only way to get the internet working again is to restart the computer. "ipconfig/renew" in command prompt says the media is disconnected. Device manager says the device is working properly and disabling then enabling it doesn't help. I've just installed the latest driver (11.5.0.32) and that hasn't helped either. Changing power settings to maximum performance does nothing as well, neither does turning the switch off then back on again. My wireless device is "Intel(R) PRO/Wireless 3945ABG Network Connection". It's basically when I come out of sleep the computer can't recognise the wireless switch, or it turns itself off even when it's in the on position.
View 5 Replies
View Related
Mar 23, 2008
1. My network has ALWAYS failed upon RESUME FROM SLEEP using a WIRELESS connection via a NETGEAR WN121T wireless-N USB 2.0 adapter, but NOT when using a wired Ethernet connection.
2. It also works perfectly from BOOT via the WN121T wireless connection with my NETGEAR DG834N draft 802.11n (and another 802.11g) wireless modem/router on Windows Vista Ultimate, both with and without the SP1 Release Candidate.
3. But upon resumption from SLEEP, the wireless n/w connection has ALWAYS failed: attempting to re-connect to the network fails, and Device Manager reports for the WN121T that ???Windows has stopped this device because it has reported problems (code 43)???.
4. The only remedy is to REBOOT.
5. The consequences of this are twofold:.........
View 9 Replies
View Related
Jun 28, 2009
Following some of your threads and digging more, I have now conquered my problem. The issue was USB wireless interface would not work after waking from S3. I was able to restore functionality by disabling the device and re-enabling (key part of diagnosis). That was a pain, and certainly not something I want to tolerate over time.
This problem is nicely discussed A USB device may no longer work correctly after Windows Vista resumes from sleep or from hibernation I know MS gets blamed for lots of PC issues which sometimes are BIOS, 3rd party drivers, and unresolved PC architecture issues. This work around forces an HCI reset after sleep/hibernation, much like how removing and replacing a notebook to a docking station would do. I expect this will evolve over time with more use of S3. New drivers, hotfixes, maybe BIOS... but for now this brute force workaround works and makes total sense.
View 0 Replies
View Related
Aug 19, 2009
I think after this update: Update for Windows Vista for x64-based Systems (KB968389) …my dual monitor video card: PNY VCG86GTS5XWB-OC GeForce 8600 GTS 512MB 128-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card …sometimes does not bring the second monitor on after waking from S3 sleep. It’s still in dual screen mode as I can see a taskbar window fly to the second monitor. But I have to sleep and wake again to get it to come back on. Anyone else experience something like this? I don’t remember it ever happening before and was wondering if it could be the patch.
View 6 Replies
View Related
Mar 23, 2008
I have one pc installed with vista business and I have license key of vista enterprise which we have purchased. I like to upgrade windows vista business to windows vista enterprise without uninstallation of vista business.
View 5 Replies
View Related
Nov 14, 2009
The system is a HP with AMD quad proc, COTS from BestBuy. Came with Vista Premium and is new, runs Vista OK after I turned off the power conservation sleep mode on the system. Turns out sleep/wake on Vista isn't always that reliable and messes up with Wireless LAN drivers and the TV PVR card. But setting the CPU to never sleep fixed all that.
I added a second disk, using a newer SATA disk, unpluging the primary existing disk as to preserve it. Using the recovery media I made earlier, I recovered the Vista OEM image to the new disk. Always like to know if those OEM recovery things really work. And I will say this, it is better than other vendors as it properly restores the recovery partion too.
Next to upgrade the system to Win 7 picking a clean install. I like clean installs as it doesn't carry the garbage forward including possible old driver issues. And it should give the OS a fair chance to run. Then installed drivers for the stuff Win 7 didn't recognize. Really it was just the keyboard and the PVR. Let the system settle in as Win 7/Vista have a propensity to do stuff in the background, waited until that seem to subside............
View 7 Replies
View Related
Mar 29, 2009
let me pick everyone's brain here. Can you guys tell me what the best wireless network card is vista 64 compatible? I play a lot of FPS'es online and want to try to find the best one for me. I just moved and right now I am running a 50ft wire from the living to the second room of the house (so I'm basically 40ft away). Also, how bad will my lag be for games like COD5 with a wireless card? I've only ever hardwired my rig to the router and never gone wireless before. So I'm leary of this move in fear of completely destroying my online playing.
View 7 Replies
View Related
May 31, 2008
is anyone able to name a wireless network card (preferably d-link, but others welcome) that I will be able to:
1) find in a store
2) find the vista x64 drivers on the companies website
3) 100% guaranteed to work with drivers in x64 VISTA
It seems that there are so many out there and no one can 100% say if any work.
View 4 Replies
View Related
Feb 26, 2009
I bought a computer from Velocity Micro. It has a Geforce 9500GT graphics card, a 500gb Hitachi hardrive, and 2 gig memory. It runs about 2.4 ghz. However, I have been having major issues with this computer. I get constant bsods. So far I have reinstalled the driver, replaced a bad memory stick with a replacement, and updated everything I basically have on my computer, including the mouse. However, I have done many tests which revealed that there is nothing wrong with the hardware. There was a problem with my belkin wireless card so i replaced it with a Ralink wireless LAN card. However, i am still getting bsods and the techs at velocity say that there might be a issue with this card too. Now i am just speculating but its too weird to have 2 internet cards which malfunction, one of them which is only a few months old. Can someone just tell me if it were the two so called "malfunctioning" cards or it might be something else.
View 4 Replies
View Related
May 26, 2010
It appears that Windows Media Player that comes with Vista Enterprise does not include the ability to play DVDs. When I try it says that no codec is installed. what I need to download, preferably for free, to either get WMP to play DVDs, or a free player that's not too obnoxious with ads. I tried installing the K-Lite Standard Codec pack, but either I did it wrong or it isn't enough.
View 9 Replies
View Related
Apr 16, 2008
shortly after i installed SP 1 for vista business my wireless card started to disable itself and stop all traffic. the only way i could get my network back was to reboot the laptop. i have looked in the network connections folder and saw the card was listed as disabled, after trying to enable it it still said it was disabled even tho the enabling... window poped up. i have tried to reinstall drivers, upgrade drivers, release and renew (only to be told it is disabled), run the diagnositcs and checked my router. my router was not causing the problems as others in my house were still connected.
View 9 Replies
View Related
Mar 23, 2008
I upgraded from XP and now find my wireless has disappeared. I have updated the driver but the icon says the Ralink wireless lan card 'Not exist'.
View 5 Replies
View Related
Jun 18, 2008
I downloaded lates drivers from Dell, no go, I reinstalled drivers several times, no go I checked in cmos and it is enabled. Why goingform Vista pro to ultimate caused problem?
View 6 Replies
View Related
Jun 10, 2009
I have to move my computer so I'll need to go wireless. Are those Wireless USB Adapters as fast as a PCI Card? Seems so easy to install, and if it's just as good, why not? My PC will be 6 feet from the router, but the signal will have to go through a 4-foot wall. (standard residential wall, drywall and wood 2x4's)
View 5 Replies
View Related
May 12, 2008
I have a Novatel Wireless Merlin S720 card. In my Toshiba Satellite P105-S921 laptop, this card fits snugly in the PCMCIA slot and the power light lights-up. However, in my Toshiba Satellite X205-SLI4 laptop, this card does not fit snugly in the PCMCIA slot ( it jiggles back and forth ) and the power light does not light-up.
View 7 Replies
View Related
May 11, 2009
I wrote a couple of days ago about stuttering sound, and how it would kill my FPS in Bioshock or any other games. I looked in my system info and saw this: <img src="http://img17.imageshack.us/img17/883/irqproblem2.png">
View 4 Replies
View Related
May 20, 2009
since building a new rig last christmas ive had endless problems with wireless networking.
specs:
asus p5q-se
intel e8400
4gb corsair dominator ram
palit hd4870 1gb
seagate sata II 500gb
corsair tx series 650w
vista ultimate 64 bit
wireless cards: d-link g510 rev C and Asus wl-138g v2
With the g510 i can get a connection to the internet but im getting only 1mbps despite 22mb internet, browsing and downloads are painfully slow.
With the wl-138g i can only get a local connection or connection with limited access.
Ive tried everything i can think of:
Wipe, reinstall and try new drivers,
tried all pc slots
removed second stick of ram
updated bios, cleared cmos
reinstalled vista
I've even installed xp on a spare hard drive and i get the exact same problems.
After all this, i thought i must have a faulty mobo so i returned it to the reseller, they told me they have "confirmed the fault" and sent me a new one.
Yesterday i put my pc back together without any cards, installed the asus drivers and put the card in, connected fine and got good speeds on the internet. I rejoiced and celebrated, thinking it was all over.
Then, this morning i booted up and i got no connection at all, after loads of tinkering im back to square one and both cards are operating like they did before the motherboard replacement.
View 9 Replies
View Related
May 20, 2008
I can't get online to update any of my drivers.. cuz my wireless card doesn't work. I even tried the disk, it only has x86 on it. so I ran a hardwire, can't usually, it's on the floor. so I used it and downloaded some things 'm having NO luck with it. It's a Airlink Mimo XR 802.11G PCI Adapter mdel AWLH5026.
View 7 Replies
View Related
Jan 13, 2010
I was wondering if anyone can tell me how to find the mac address for my wireless card in vista. I'm having some difficulty as neither ipconfig /all nor wireless card properties from device manager seems to have the info. I know I could physically look at the card and get the number, but I would really like to learn how to find it through the software.
View 5 Replies
View Related
