Wireless Printer Stops And Won't Print The Rest
May 28, 2008
I have a new Dell computer running Vista Home Premium. My Brother printer prints fine when hooked up via USB. But won't print wirelessly through my router (Airport Express). The computer recognizes the printer wirelessly and has it as "ready." When I send something to print, it starts printing the first few lines and then just stops and won't print the rest. If I try again, nothing happens at all. I have to uninstall and reinstall the printer to get it to do anything. And even then, it won't print more than the first few lines of the document. Had no problems printing wirelessly with this printer and router on my old Dell that ran XP.
View 7 Replies
ADVERTISEMENT
Mar 16, 2009
I am running Vista Home Premium on my laptop. I have a Brother wifi printer (although it connects to the router with a wire). I have 2 desktops and my laptop that use the printer. The two desktops use the printer without a problem. My laptop only works during the period after I add the network printer. When I reboot, it will seem to print to the printer but it just gets stored in the printer queue and won't print it.
Telling the print queue to try again doesn't do anything. If I delete the printer from my laptop and add it again as a new printer, it works great until the next reboot. I have no other printers in my printer list, only the Brother. None of the desktops (one Vista Home Premium, one XP) have this problem.
View 5 Replies
View Related
Mar 23, 2008
i am trying to make a wireless connection from my sony vaio laptop, running vista business, to a printer (canon pixma ip4300) connected via usb to the print server of my wireless router (siemens gigaset SE551). i installed the printer as a 'local' printer on a tcp/ip address, as per the router manual - admittedly, the manual instructions were for winxp.
the problem: the printer comes up in vista as 'offline', cannot be changed to online, and won't print. documents appear in the print queue but do not print out - only sometimes when i restart the computer, the printer prints out a page or two of whatever the last failed job was. the same wireless setup with my old sony xp pro laptop works perfectly, and the printer works when connected to the vista laptop directly via usb cable, so the problem must be vista... i've turned off win defender and win firewall to no avail.
should i install the printer as a network printer? i have tried this but windows couldn't see the printer - it could see the router, but not the printer connected to it. but i've never setup a networked printer before so maybe there is something simple i'm missing.
View 8 Replies
View Related
Jun 15, 2008
I have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
View 6 Replies
View Related
Jun 22, 2008
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
View 7 Replies
View Related
Mar 23, 2008
I have a Brother HL-5280DW. My mac will print to it over the wired network. My XP machine will print to it over the wired network. Vista, however, will only print to it until somehow the IP address is changed. This is confusing, since to the best of my knowledge, the IP address has always changed and it never mattered on the mac or under XP. I have no idea how to fix this, but I do know that my frustration with Vista is reaching the point that I need to either get this stuff working or junk the OS.
View 4 Replies
View Related
Jan 19, 2010
I recently upgraded my OS from Vista Home to Ultimate (a clean install). It seems as though after I have been using the internet for a while or if I am using too much bandwidth (downloading a few things or have a couple windows open) my wireless stops. I have access to the network - just the actual wireless internet stops. I can't use the diagnose feature by right-clicking as it never has a solution that actually fixes it - I've tried them all. We have several other computers in the house and they don't have problems with it - it also happens when I'm at work as well. When I attach the computer directly to the modem (even while this problem happens) the internet works fine.The only fix is restarting - but that's quite annoying and happening often. I have downloaded the newest drivers for this computer from HP (its a DV9200 CTO pn: EZ345AV) and I can't figure it out.
View 8 Replies
View Related
Mar 23, 2008
I have a XP desktop and a Vista laptop. I have the network configured and I can see the shared folders and printers on the XP desktop from the Vista laptop. I can access the shared folders and printer. I can send a print job to the printer from the laptop and I can see it in the print que but the job will not print it just sits there. I cant print a test page or any other document. I let Vista install the print drivers for the printer, a Lexmark 1270.
View 5 Replies
View Related
Sep 22, 2009
I added HP printer using open as admintrator command through the control panel and I can see the printer on MS word control center, however it does not print at all. I tried printing via pdf and still it does not print. It seems that vista 64 is not seeing the printer.
View 5 Replies
View Related
Mar 6, 2009
So i got a Dot Matrix Panasonic KX P2123 for my computer. My use of this is for tatoo stencils in which you dont need the ribbon and such. But I just got it todayand went to hook it up to my computer and hooked it up with a parallel/USB cord. Once I did so, I went to add printer, and added it just fine, automatically had the driver installed. Which I was trilled about!.............
View 7 Replies
View Related
Apr 4, 2009
I did a clean install with VISTA ULTIMATE (same program as-was). I have been trying to figure out all day why the USB laser jet printer will not print. It is supposed to 'see and install a USB printer when switched on', but it won't. Nothing was changed on the hardware hook-up since it worked fine on the previous VISTA O/S. I know this is got to be a simple fix, but danged if I can figure it out?
View 4 Replies
View Related
Apr 2, 2010
There was a problem when installing the Dell v305 printer that I found answered at I tried to follow their solution but in the folder C:Windowssystem32spoolDRIVERS I could not delete the folder color, because, it said I need permission to delete it. I am the sole owner and user of the computer. How can I provide permission to myself?
View 4 Replies
View Related
Mar 26, 2009
Everything works just fine on my new Vaio laptop running on Vista home premium, connecting to my wireless network TalkTalk (the router is Echolife HG520s), until the connection stops working but still says I'M CONNECTED PERFECTLY!
I thought it was a typical firewall problem so i tried with disabling Windows firewall and the mcafee security center but nothing seems to work except disabling the network hardware and enabling again.
View 5 Replies
View Related
Jun 1, 2008
I have done this often on XP to XP. Now I want to do it on a two machine setup using VISTA on one machine and XP on the other.
I have a EPSON R320 printer installed and working fine on the XP machine. It was connected to that machine's USB.
I moved the USB connector to the VISTA machine and installed the printer drivers etc on that machine. It printed fine.
On both machines printer sharing is activated, using share name R320.
I moved the USB connection back to the XP machine, I can't figure out how to 'add printer' on the VISTA machine to enable printing on the R320 from the VISTA machine to the R320 via the XP machine.
View 9 Replies
View Related
Jun 23, 2009
I have Vista Ultimate.
I don't have a printer, but there are some documents that i want to save.
The only option in a web page to make copy of them is to print them.
How can i configure my vista to print what ever "to file" instead to printer?
View 2 Replies
View Related
Jul 29, 2009
I have a new Vista 64-bit computer. Connected to the Vista computer is an HP F4820 Desk Jet printer. My Vista computer connects to the internet via a wireless connection. In another room in the house, we have an XP computer. It, too, connects
to the internet and home network via the wireless connection. When I got the Vista 'puter and the new printer, and hooked them up, the XP computer was able to print. It took some hoop-and-fire jumping to get it to do so, but it did.
My DVD/CD burner died and I had to kill my computer at the instruction of Dell (grrr), which created more problems than it was worth given that I already knew it was a harddrive problem. BUT, anyway, now my XP cannot print........
View 9 Replies
View Related
Apr 13, 2009
We have a small network with 3 PCs and 1 printer with wired connections to a router. All of the PCs can see each other on the network. One of the PCs cannot see or print to the network printer, though the other two can. The printer is shown as installed, but PING shows 4 packets sent, 4 packets received - 'Host Unreachable'. Is there some file or driver that might be corrupted on the one PC causing this... ?
View 7 Replies
View Related
Aug 25, 2009
I've got 2 Vista laptops. Both on Home Premium. One of them is sharing a usb Lexmark 8300 printer. The other one can see the shared resources and connect to that printer but it can't print. No error messages whatsoever. After printing a test page I can see number 1 next to the printer status but when I double click the printer the print job is not there. Both the computers are in the same workgroup. Both have Printer Sharing enabled in Network and Sharing Center. On the computer that's sharing the printer the Everyone group was given full access. All paper set to A4 on both of them.
View 4 Replies
View Related
Sep 21, 2009
I have a Brother MFC-420CN that I had hooked up to our Fios wireless router for almost 2 yrs with no problems. We had to unhook everything for a while. When I went to set it back up tonight I tried to print to it from My Dell Desktop (Vista Home Basic) but it kept erroring out. I noticed that it said it was offline. I checked my router admin page and it showed the printer as active and enabled with an IP address of 192.168.1.100. I was able to successfully ping it from the admin panel and the comand prompt, but I was not able to view it in a browser window. I tried rebooting the router, PC and printer to no avail. I then tried printing from my wireless laptop, (Compaq- Vista). I successfully did a test print from the laptop, but then I tried to view the printer thru an internet browser and after that it did the same thing as the Dell.
It will show Ready for the status, but if I try to print it errors out and goes to Offline. I tried it from one other laptop we have (Toshiba-Vista) with no luck. I tried deleting and readding the printer, no change. I found a thread that said to remove SNMP from the Port settings. I did that on both the Dell and the Compaq. The Compaq now prints, but the Dell still won't print at all. Haven't tried it on the Toshiba yet (limited access- teenagers pc :-) I don't see why unplugging it would make it stop working on all three pc's. I don't know why I can ping it, but not connect to it in a browser or print to it.
View 4 Replies
View Related
Jun 23, 2008
XP Pro x32 cannot print to Vista Ultimate x64 Shared Printer
1). XP Pro 32 node can see Vista Ultimate 64 Shared Printer
2). Right Click Vista Ultimate 64 Shared Printer From XP Pro 32. No Printer Driver Installed Installed Printer Driver no reboot and then tried reboot Test Page create Widows Error..........
View 4 Replies
View Related
Oct 27, 2009
If I let my computer sit for roughly 1 hour or more the mouse stops working and I have to restart the computer via the keyboard. I've tried reconnecting from the transceiver and switching the mouse on/off and pressing the reset button. None of these things seem to do the trick.
View 5 Replies
View Related
Mar 23, 2008
I have a remote printer installed with a wireless router. I install the printer on a wireless notebook PC using Vista???s wizard, and initially everything works properly. However, if I turn off the PC, or reboot it, or sometimes only if just a few days elapses the PC will no longer be able to get the printer to print. If I have the spooler enabled, the pages appear to be sent to the printer, but nothing happens. If the spooler is disabled, then the process just hangs until I abort it. The only other symptom I've seen is that when the problem is occurring the printer???s status shows it is offline, but when I try to change it to online the status simply changes to ???offline.offline???. Wireless connectivity does not appear to be a source of the problem, since I have no interruption of other network activities, including Internet.
View 9 Replies
View Related
Mar 23, 2008
i have problem with HP Deskjet 450 under Vista Home Premium. Printer is installed by Vista, everything looks ok, but i can't print. When i want to print Test page, only row of 2-20 smilies is coming out in best case and print job shows error . When i ask HP, they say Microsoft is responsible for drivers. Microsoft says i should ask HP. I slowly begin to be annoyed. Have bought short certified hi-speed USB 2.0 cable. Windows update shows that there is optional update for Other hardware - dj450 USB, dowloaded and it says it is not possible to install, error code: 80070103. Under Win XP are no problems. Is there any solution aside from buying new printer or downgrade to XP?Is there a way to install this update
View 9 Replies
View Related
Jun 5, 2008
I have a Lexmark Printer which worked with Windows 98. Now it won't work with
my new Emachines computer with Windows Vista Home Premium. I have downloaded
the recommended updates, but all I seem to get is the documents put in the
queue, but does not send to the printer to begin printing.
View 9 Replies
View Related
Mar 23, 2008
My situation is I have a home network with one desktop running XP Home, attached to a wireless router by CAT5 cable and a local Epson printer. The Epson printer was shared as a network printer. I have another NEC notebook, which accessing the network very fine through the WiFi, and can print properly. I just purchased a new Sony notebook that run Vista Business. I set up the network as follows :
Workgroup : checked and was the same as my desktop
Network : Private
Printer sharing : On
File sharing : On
I can see my desktop in the network map. The notebook can browse the internet by using IE without any problem. However, I cannot add the network printer. I choose "Add new printer", and choose "add new network printer", the result is no network printer found. I also try to add new local printer, and build a new port, and key in my shared printer location "\Zeeman_DesktopeemanEpson", but got the response that the port is not correct.
View 7 Replies
View Related
Sep 23, 2009
Using vista business sp2.
Have had the printer for several years and it works flawlessly
3 days ago it suddenly refused to print When I look at the printer folder, it is default but it says it's offline I can't find out how to make it go online
From 'justanswer' I was told to do a restor, so I've tried going back a couple of restores, but they both failed, then had to undo the restores to get back to where I was
In safe mode I removed the printer then added it back by re-installing its software
sometimes vista asks me to say which port, but as it's usb plugnplay I dont know how to handle it I've tried resetting the printer from this website
http://tricks-collections.com/resetter-printers-canon-pixma-ip1000-ip1200-ip1300-ip1500-ip1600-1700-ip1880-ip2200-ip3000-ip4200-ip5200/.
View 9 Replies
View Related
Oct 10, 2008
I'm having a problem with Vista business that's driving me crazy. At work I have Vista business on a main machine (called MAIN). It's a Dell Vostro and it came pre-installed with Vista Business, 4 GB RAM, 200 GB hard drive. I have patient management and imaging software on it and I have up to 7 computers that connect to MAIN to access this software. I have all the sharing and security settings for "Everyone" and I can connect with all seven computers most of the time. But everyday, one or two of the workstation computers (running Vista basic), will be kicked off and I get an error message when I try to reconnect to MAIN "No more connections can be made at this remote computer at this time because there are already as many connections as this computer can accept."
So I can't access the software on MAIN, I can't print to the printer on MAIN, I can't do anything until I reboot MAIN. Then everything can connect again. This happens randomly and I know the maximum connections is 10 computers, so why am I having this problem with 7? Connection to the router is fine and I have internet connections on all seven. 2 of the seven are wired to the router and the other 5 are wireless connections.
View 5 Replies
View Related
Mar 31, 2008
I have some Dell laptops (d830, d620, d630) that has problems with the wireless networkcard (Intel Wireless 4965 AGN). Very often it stops to function after the computer has been to sleep. The wireless icon still apears in the bottom right corner with a red cross over it. When you click it it says that it's connected with limited access. The wireless card will not apear when you run ipconfig If you disconnect it will not connect successfully again It seems like it manages to find all availble networks, but you can not connect successfully to any of them.
I have tried to install this fix reagardless that I already have SP1, but this won't install. Probley because it has already been applied. Also tried the Regedit workaround mentioned in the KB. I have set the power option to high preformance, but it still happends when the computer is manual set to sleep.
View 6 Replies
View Related
Mar 23, 2008
I have a desktop running XP with a Canon MP160 hardwired to it. I also have a laptop running Vista. When I first hooked up my router to the desktop computer with XP, verything was working fine. I could share files back and forth between the two computers and I could print over the wireless network. But for some reason now I can't print. I can't even find the printer through the add printer thing.
View 6 Replies
View Related
Jun 9, 2008
I have a Dell desktop computer & a Aser laptop, both running Vista Home Premium. I have a HP Officejet 6110 all-in-one printer. I also have a wireless router. From the desktop computer I can print just fine but I cannot print from my laptop. I have tried Adding a New Printer. It runs through all the steps. I have tried selecting "use an existing port" and when that didn't work I started over and chose "create a new port". Both times it looks like it is going to work. At the end you can choose to print a test page." However, it never actually prints a test page. I do not get any sort of error. If I go to file, print, it shows my hp6110 listed and it is highlighted but nothing happens.Can someone tell me exactly what I need to do to be able to print from my laptop? I'm somewhat dense to all the terms and jargin so please be specific.This forum is the only place I have ever been able to come to get answers that really work.
View 8 Replies
View Related
Mar 2, 2009
We have a Dell Desktop running XP it connects through USB to our 2Wire Gateway router.
We recently purchased a HP Laptop running Vista x64, it is connected to the same 2Wire through the wireless signal.
Here is our problem. We purchased a HP Photosmart C5580 which is connected to our desktop and functioning fine.
We were told we could connect our laptop to this printer wirelessly all though it has no wireless capability (other than bluetooth which we do not have on our laptop). They said there were two ways to network it so that we would not have to use the USB with our laptop.
What is the easiest way to do about doing this?
I have spent 6 hours on the phone with HPs so called "techs" and they were unable to help at all. Kept trying to connect through bluetooth (which I told them our laptop was not capable of). I called Geek Squad to make sure are laptop was some how to connect to this printer with out a USB as that is the only reason I bought it. They said we could do it 2 ways through networking and that it would be simple enough for me to do on my own.
Is anyone able to help??
View 9 Replies
View Related
