TCP/IP Address Change Stops Printer?
Mar 23, 2008
I have a Brother HL-5280DW. My mac will print to it over the wired network. My XP machine will print to it over the wired network. Vista, however, will only print to it until somehow the IP address is changed. This is confusing, since to the best of my knowledge, the IP address has always changed and it never mattered on the mac or under XP. I have no idea how to fix this, but I do know that my frustration with Vista is reaching the point that I need to either get this stuff working or junk the OS.
View 4 Replies
ADVERTISEMENT
Mar 23, 2008
I'm using Vista Home Premium. I have a Brother 5170DN (direct network connection) that has been working fine with my older computers running earlier Windows versions. The trouble is that when the IP address of the printer changes, Vista is no longer able to print to it, so I end up having to reinstall. The reinstallation adds a new TCP/IP port into the driver, and then it works fine until the next time. Since my network is changing frequently right now, due to reconfiguration, this is a pain.
View 6 Replies
View Related
Mar 16, 2009
I am running Vista Home Premium on my laptop. I have a Brother wifi printer (although it connects to the router with a wire). I have 2 desktops and my laptop that use the printer. The two desktops use the printer without a problem. My laptop only works during the period after I add the network printer. When I reboot, it will seem to print to the printer but it just gets stored in the printer queue and won't print it.
Telling the print queue to try again doesn't do anything. If I delete the printer from my laptop and add it again as a new printer, it works great until the next reboot. I have no other printers in my printer list, only the Brother. None of the desktops (one Vista Home Premium, one XP) have this problem.
View 5 Replies
View Related
May 28, 2008
I have a new Dell computer running Vista Home Premium. My Brother printer prints fine when hooked up via USB. But won't print wirelessly through my router (Airport Express). The computer recognizes the printer wirelessly and has it as "ready." When I send something to print, it starts printing the first few lines and then just stops and won't print the rest. If I try again, nothing happens at all. I have to uninstall and reinstall the printer to get it to do anything. And even then, it won't print more than the first few lines of the document. Had no problems printing wirelessly with this printer and router on my old Dell that ran XP.
View 7 Replies
View Related
Dec 12, 2009
I have two ethernet hardwired network printers on my home net. Why do the IP adresses change and what can I do to to prevent this or at least find an easy way to fix it when it does. This is not an user freindly ergonomic situation MS.
View 6 Replies
View Related
Apr 17, 2008
Up to a few weeks ago, I was able to change my IP address with these commands:
ipconfig /flushdns
ipconfig /release
ipconfig /renew
But all of a sudden, I cant. I talked to my ISP and they say that nothing change on their side and I still have a dynamic IP. I believe that maybe one of the updates is responsible for this, I update to SP1 and almost every update exist for vista. So, my question is, do you know maybe on an update that can cause this?
View 5 Replies
View Related
Jun 10, 2009
I thought my IP address changed on every boot, I have a router/modem and thought it kept changing.
Is there a way to change the IP address?
when I log into gmail it shows the last 5days of logging in--all the same IP address.
View 9 Replies
View Related
May 17, 2008
Need to change my IP Address. Details; i'm with Virgin media broadband i'm using a cable modem. and i've read how to change it; Via the Network > Manage network connections > Porperties. Doesnt work it tells you. "Obatain and IP address automatically." But mine is already set to that. and with the "Use this IP address." option i don't know what to put in, for the simple fact i wouldnt want to put in an invalid IP.
View 9 Replies
View Related
Mar 27, 2010
I have IE8, Windows Vista and Windows Mail, which shows as my default mail and only email address.
I would like to have my Hotmail address as my default mail, but Windows Mail will not allow me to add Hotmail. Wizard error says it does not support HTTP and I cannot see anywhere under Hotmail options/more options where it allows me to change any type of connections to POP3.
I read it can be done in G-Mail, but unfortunately I have Hotmail.
Is downloading "Windows Live" and uninstalling my "Windows Mail" a solution?
I have all my mail forwarded to Hotmail, so I wouldn't lose saved messages.
View 9 Replies
View Related
May 10, 2010
If I have multiple email aliases for my POP email account how can I change which one I use for the response. Or does it default to only one in my preferences under tools?
View 6 Replies
View Related
Aug 22, 2008
I was just wondering if anyone else had experienced these annoying freezes that occur randomly in Vista 64. It can happen while I'm playing a game, it can happen while I'm browsing firefox etc. I freeze up about 4 times a day and the only solution is a hard restart.
It is beyond me, I have the video card drivers up to snuff, all updates are installed, virus scanners/spyware scanners, video card isn't overheating, CPU idles at 33 loads at 42. I'll describe the problem a little better other than to just say it's freezing. When the freeze occurs, the entire screen stops moving, I cannot move my mouse, all sound stops working, and if there was a sound playing, it will get mutilated into a nasty buzz.
View 9 Replies
View Related
Mar 29, 2009
Been trying for hours to use Xbox 360 to access music and other files on my compuer, using both Drive address and network address. ALL files can be seen successfully on WMC on the Vista computer but nothing on the Xbox 360 -- except some photos on my son's XP machine (that worked easily).Could really use a simple solution to this please!
View 5 Replies
View Related
Mar 23, 2008
in Window XP, i used to be able to select full address to be displayed in the address bar. But for Window Vista, I could not find the way to do it. e.g. instead of showing D:Document, i want to show \sapsgsmapsnap01document. I want to send the link to my colleague to access directly to destination folder.
View 9 Replies
View Related
May 15, 2008
Whenever i create a new email by click "To" to open up my address book for selecting any email address, or when i use "reply all" and want to add in some more email address from the address book, the computer start to run and till it stuck, so the only choice for me is to end this task and type email address instead of selecting email address from address book.
i thought that this is because i got too many email address, thus i deleted most of it and now only got 700 email address inside my address book, i just can not understand that when outlook express can take more than 3000 email address book, but windows mail can not take about 700 email address book. And somemore, this email address book is just useless for me, because whenever i want to use the address book, the windows mail is going to hang... and the only choice is to go to task manager, end this task and restart my windows mail.
View 9 Replies
View Related
Feb 25, 2009
Need directions to remove a former friend's email address from my address bar. Whenever I create a message to someone with an address starting with the same first letter, his email address also shows up.
View 5 Replies
View Related
Jul 29, 2009
I?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
View 9 Replies
View Related
Jun 15, 2008
I have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
View 6 Replies
View Related
Mar 23, 2008
Dose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
View 4 Replies
View Related
Jun 1, 2009
Just installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
View 7 Replies
View Related
Jun 17, 2008
I cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
View 4 Replies
View Related
Jun 22, 2008
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
View 7 Replies
View Related
Apr 10, 2009
I just upgraded my XP home edition to Vista home premium with an upgrade disk provided by Dell. Before the upgrade I uninstalled my HP 2575 printer and software because it was listed as a compatibility issue. After upgrade I reinstalled new software from HP for my printer from the HP website. I plugged in the USB cable from my printer. Vista recognized the new device but would not put it in the printer folder in the control panel. Vista did find driver software online but could not install it. The HP solution center tells me no HP devices have been detected. When I try to print I get a message that I don’t have a printer hooked up. That’s the back ground here is what I have done.
I have updated Vista; most were successful some security ones failed. I have Service pack 1 I uninstalled and reinstalled HP software many times I started my spooler and reinstalled printer and software many times. I checked Task Manager and the hpqste08 services are running. I uninstalled virus protection and turned off the firewall. I have done everything I can find at HP, Microsoft and here. I tried to reload Vista but got a Worker Thread Returned at Bad IRQL error message so I stopped reload.
The one odd thing I did find was in the Device Manager. In the Device Manager the HP 2575 is listed twice. Once under IEEE 1284.4 compatible printer and once under Other Devices. When I click on the one under IEEE 1284.4 compatible printer and update driver software it finds the driver and says it’s up to date. When I do the same on the one under Other Devices, windows finds the software for this device but encountered an error when trying to install it. It does this when looking online and when looking in C: drive.The printer still does not show up in the printer folder in the control panel.
View 7 Replies
View Related
Jun 10, 2008
I have a Vista Home Premium Laptop, an XP Home laptop and an XP Home desktop (and an XBox 360) connected to my Linksys wireless G router and an XP Home desktop connected via CAT5 to the same router. All connect to the internet fine. The XP laptop finds and uses the printer on the desktop fine. I had setup a share of the Canon I560 printer, connected to my XP desktop, on the Vista laptop and it worked fine. I don't believe I made any changes, but now it won't find the printer and I can't seem to install a new copy.
The Vista machine will not detect the printer and won't even find the XP desktop or laptop on the network. The XP machines find each other fine. All machines get their IP address from the router via DHCP. All are in the same workgroup, or it seems so. Strangely the Vista machine shows WORKGROUP and the XP machines show Workgroup, even if I type the name in caps, XP still shows Workgroup and Vista WORKGROUP.............
View 6 Replies
View Related
Jun 10, 2008
I have a Vista Desktop that has a wireless router. I have shared a printer, but I would like my Mac laptop to be able to print to it. Do I install the printer driver on the Mac or on the Vista machine? If I install on the Vista machine, is there a special installer? The printer is an HP DeskJet 2445.
View 4 Replies
View Related
Nov 21, 2008
I have a HP Color Laser Jet 3600n already installed on the company network. I just got a new gateway with Windows Vista Home Premium 32bit. When i go to the printer wizard it locates the 3600 printer on the network. Then it asks me to choose the printer software from a list. or choose a disk. I don't have the disk. So, looking through this list, it doesn't even have the HP Color Laser Jet 3600 in there. it's got a 3000 and then jumps to 7000.
View 9 Replies
View Related
Oct 8, 2009
i have a printer on my old windows xp computer. but i went to hook it up to my vista, obviously the printer is not compatible which sucks. so is there a way i can connect it through a network? i have no idea where to start or what to do first.
View 4 Replies
View Related
Dec 27, 2007
I followed the tut here -> http://www.vistax64.com/tutorials/11...ate-1-rc1.html
Got all the prereq installed. Then after waiting the 10-15, I acutally had dinner and came back started to d/l the SP. It got to 6% and stopped, sat there for a while and then failed with a code of 80070002. Click on the get help link and followed the instructions for clearing out the Software Distribution folder.
Then I checked for updates again. Did the same thing, stopped and failed at 6%. This time I clicked the 'Try Again' button. This time after hanging out for a while it went to 19%. But then it failed AGAIN! If I try again it just stays at 19%.
I figured that maybe the server is overwhelmed. It was 9pm EST or so. I tried again here at 5:15am figuring that most of the US is in a coma at this time. Same results.
Any ideas on how to get this SP? I'm plum out of ideas!
I'm down for anything, just to get this to work! Why did they have to change the way SP where handled? The d/l from a URL was just fine!
View 9 Replies
View Related
Dec 31, 2009
Problem: sfc/scannow stops at 76 %, gives no Info just that it can not
perform the requested operation
it started when I Restored the System to Factory Install with the Discs ( 2
Discs) sent to me by Acer by mail
SP 1 is already on the Discs, all Updates installed successfully, including
SP 2
Event Viewer shows some Errors but don't know witch are associated with the
sfc/scannow
Problem Reports and Solution (reports but no solution found)
1.-
Problem signature
Problem Event Name:WindowsWcpOtherFailure3
OsVersion:6.0.6001.18000:1
File:basewcpsilmergedtutsystem.cpp
Function:Windows::Rtl::SystemImplementation:irectFileSystemProvider::SysReadFileLine:1920
Status:c0000011
StackHash:0x563c8df4
OS Version:6.0.6001.2.1.0.768.3
Locale ID:1033
2.-
Extra information about the problem
Bucket ID:182505946
Problem signature
Problem Event Name:CbsPackageServicingFailure
Stack Version:6.0.6001.18000
Package:Package_for_KB973687~31bf3856ad364e35~x86~~6.0.1.1
Status:80070026
Failure Source:Execute
Start State:Resolved
Target State:Installed
OS Version:6.0.6001.2.1.0.768.3
Locale ID:1033
Extra information about the problem
Bucket ID:769551469
I suspect that its related to the CBsPackageServicingFailure or both or more
don't know where to go from here
would really like to get sfc/scannow working Email with Acer America this Computer is still under Factory Warranty don't know what it covers, but they DON'T want me to return it to Store in Winnipeg where I purchased it don't know if I been screwed, this computer (LapTop) does Not have a Recovery partition, it has 1 disc C and 1 partition 232 GB (my Emachine Home Basic Desktop did have a Recovery Partition on D)
the Store made me set, 2 Discs after I complained and Acer sent me a set, 3.
Discs after some Emails already been at the store they are slick and have few answers , don't think I'll get far at the store.
View 9 Replies
View Related
Sep 17, 2009
I am running Vista Home Premium x32 SP1 on a Dell XPS T8300@2.4 GHz. Whenever I try to run sfc /scannow it stops at either 39% or 69% ('Windows Resource Protection could not perform the requested operation')and at the same time I get a pop-up message 'Windows modules installer stopped working and was closed'. I decided to run the sfc because yesterday morning I found my pc with a blue screen and the dreaded 'Windows has encountered a fatal error...' message. It booted successfully but I noticed several things (so far): all entries from System restore had disappeared, Windows updates had failed several times in the last 3 days trying to install Windows Vista SP2 (KB948465), and the 'uninstall/repair program' button in the control panel did not work (when I right-click over a highlighted program I only get two empty squares and no options). So I could not restore the system, could not update it and could not uninstall the most recent programs that might have caused the problem.
The next step was to do a repair install since I have the original Dell installation DVD for Vista SP1 but the upgrade was also unsuccessful - in the beginning of the installation I got a pop-up window with the message: setup.exe - Bad Image : C:Windowssystem32uniplat.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. I clicked 'Ok', the installation ran for about 1 1/2 hours and afterwards a message informed me that it was not successful and my system was being restored to its previous state.........
View 9 Replies
View Related
Dec 29, 2008
Just starting this afternoon whenever I go to view pictures, WMP stops working and shows this message:
Problem signature:
Problem Event Name: APPCRASH
Application Name: explorer.exe
Application Version: 6.0.6001.18164
Application Timestamp: 4907e791
Fault Module Name: PhotoViewer.dll
Fault Module Version: 6.0.6001.18000.....
View 4 Replies
View Related
Mar 23, 2008
When I open outlook, vista stops running after a few minutes Whenever I work in Oulook safe mode there seems to be no problem. This started after I downloaded SP 1 Someone experience?
View 4 Replies
View Related
