Sfc /scannow Stops At 39%

Sep 17, 2009

I am running Vista Home Premium x32 SP1 on a Dell XPS T8300@2.4 GHz. Whenever I try to run sfc /scannow it stops at either 39% or 69% ('Windows Resource Protection could not perform the requested operation')and at the same time I get a pop-up message 'Windows modules installer stopped working and was closed'. I decided to run the sfc because yesterday morning I found my pc with a blue screen and the dreaded 'Windows has encountered a fatal error...' message. It booted successfully but I noticed several things (so far): all entries from System restore had disappeared, Windows updates had failed several times in the last 3 days trying to install Windows Vista SP2 (KB948465), and the 'uninstall/repair program' button in the control panel did not work (when I right-click over a highlighted program I only get two empty squares and no options). So I could not restore the system, could not update it and could not uninstall the most recent programs that might have caused the problem.

The next step was to do a repair install since I have the original Dell installation DVD for Vista SP1 but the upgrade was also unsuccessful - in the beginning of the installation I got a pop-up window with the message: setup.exe - Bad Image : C:Windowssystem32uniplat.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. I clicked 'Ok', the installation ran for about 1 1/2 hours and afterwards a message informed me that it was not successful and my system was being restored to its previous state.........

View 9 Replies


ADVERTISEMENT

Freezing: The Entire Screen Stops Moving, Cannot Move My Mouse, All Sound Stops Working

Aug 22, 2008

I was just wondering if anyone else had experienced these annoying freezes that occur randomly in Vista 64. It can happen while I'm playing a game, it can happen while I'm browsing firefox etc. I freeze up about 4 times a day and the only solution is a hard restart.

It is beyond me, I have the video card drivers up to snuff, all updates are installed, virus scanners/spyware scanners, video card isn't overheating, CPU idles at 33 loads at 42. I'll describe the problem a little better other than to just say it's freezing. When the freeze occurs, the entire screen stops moving, I cannot move my mouse, all sound stops working, and if there was a sound playing, it will get mutilated into a nasty buzz.

View 9 Replies View Related

Ran Sfc /scannow As An Administrator

May 13, 2009

Ran sfc /scannow as an administrator. Received the following message when it finished. Verification 100% complete. Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log, etc. Copied the CBS.log to my desktop and opened it. It was quite large so I deleted all entries except those made today. I didn't really know what I was looking for, but there didn't appear to be any anomalies. The last two lines in the log were:

2009-05-13 09:18:11, Info CSI 000001cd [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired. 2009-05-13 09:19:45, Info CBS Scavenge: Package store indicates there is no component to scavenge, skipping. These two lines seem to be saying that all is well and that it was not necessary to find any replacement files.

View 9 Replies View Related

SFC Utility And Scannow

Dec 2, 2009

I recently got a new external hard drive with 1TB capacity and have tried to do a back up of my files. There was an error when I tried to do this ox81000008 which informs me that I must use the Sytem File Checker. I have opened up a command prompt to and typed in sfc /scannow

However it won't run and I'm being informed "You must be an administrator running a console session in order to use the sfc utility". I am the only person that uses my PC and my profile has full administration. how I might be able to successfully backup my files?

View 6 Replies View Related

Does Not Work Sfc /scannow

May 15, 2010

does not work, or it opens and closes instantly . .any thoughts on what might be causing this?

View 8 Replies View Related

Sfc Scannow - Cannot Repair File

Aug 25, 2009

SFc scannow is reporting that the system cannot repair some corrupt files. From reading the CBS log I found this entry:

CSI 0000001d [SR] Cannot verify component files for 3c52bd14fb076de75da14b4b67a96f83, Version = 6.0.6000.16720, pA PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, Type neutral, TypeName neutral, PublicKey neutral, manifest may be damaged (TRUE)

View 4 Replies View Related

Found Corrupt Files With Sfc /scannow

Aug 31, 2008

found corrupt files when I ranAttachment 6215 sfc /scannow Also found the same thing when i went to use vista glazz to patch upAttachment 6216 and I cant provide the cbs log that scannow provided me, b/c I don't know what info is relevant

View 8 Replies View Related

Checkdisk Weirdness And SFC /scannow Oddities

Feb 12, 2009

I powered up my Vista 64 machine tonight and chkdsk starting going berserk. I saw a whole bunch of "deleting index entry" and something about Windows and AMD64. I had no idea what I was even seeing until I did some research, but I'm confused about what's happening. Anyway, from a command prompt I ran sfc /scannow and this is what I saw: C:UsersAdministrator>sfc /scannow

Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 100% complete. Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log

C:UsersAdministrator>findstr /c:"[SR]" %windir%logscbscbs.log> %userprofile%
Desktopsfcdetails.txt.....

View 5 Replies View Related

SFC /scannow Found Two Termserv.dll Files

May 30, 2009

I looked at the CBS.log and found that doing a search this has been going on since 1/2008 and my system runs fine. I just rebooted yesterday with 1252 hours of processor idle time so I think the system is stable. I looked at repairing the dll file from the vista disk but I think I could learn Chinese sooner than follow all these steps to take ownership and get the files from the disk.

View 5 Replies View Related

Computer Freezes During Scan (be It Windows Defender, Anti-virus, Or SFC/scannow)

May 12, 2010

This friend of mine has real problem with her laptop (Vista sp1)it was first noticed when her anti-virus did a scheduled scan. The anti-virus program hung whilst scanning the System32 folder.I tried with Windows Defender. Same thing, it hangs after a while.

I de-activated her anti-virus program (forgot the name. Not a well known brand) and downloaded/installed Avast, to no avail it also hangs whilst scanning the System32 folder.I also tried to scan using SFC/scannow. The PC freezes at 68 % of the scan.I tried these different manipulation in safe mode.Same results and everytime, the PC Freezes and I am obliged to do a hard stop/restart.

View 9 Replies View Related

"sfc /scannow" Windows Resource Protection Could Not Perform The

Mar 23, 2008

I'm using Vista Ultimate. You can suppose that if I'm writing here it's because I'm finding some problems (and I'm unable to solve them by myself). I'm quite sure that I don't have malware on my computer. It's usually not connected to internet. I think I have some kind of system files & registry corruption.

"Chkdsk" says the filesystem is ok. Next step would be running "sfc" (sfc /scannow). But it refuses to start. The message is: "Windows Resource Protection could not perform the requested operation." I already tried it starting in "safe mode". I tried also to install "Service Pack 1" but it I couldn't.

View 9 Replies View Related

CBS File " Access Denied " After Running Sfc/scannow

Jun 15, 2009

I ran sfc/scannow in administrator mode and it said it had found some corrupt files that it was unable to fix. I opened the C:WindowsLogsCBS directory and it contained 5 files: CBS,CBS.persist,CheckSUR,CheckSUR.persist and Filterlist. I attempted to open CBS but a message says " Access is denied ". The same applied to CBS.persist. I am able to open CheckSUR, CheckSUR.persist and Filterlist. Upon opening properties on these three files the date created, modified and accessed is May-28-09. The dates for CBS are as follows: Created: November-27-08; Modified: June-15-09; Accessed: May-31-09. The dates for CBS.persist are: Created: November-27-08; Modified May-31-09; Accessed:November-27-08. The CBS file is apparently 15.7 MB and the CBS.persist file is 50.2 MB. access the relevant CBS file?

View 7 Replies View Related

Can't Download SP1 RC - Stops After 19%

Dec 27, 2007

I followed the tut here -> http://www.vistax64.com/tutorials/11...ate-1-rc1.html

Got all the prereq installed. Then after waiting the 10-15, I acutally had dinner and came back started to d/l the SP. It got to 6% and stopped, sat there for a while and then failed with a code of 80070002. Click on the get help link and followed the instructions for clearing out the Software Distribution folder.

Then I checked for updates again. Did the same thing, stopped and failed at 6%. This time I clicked the 'Try Again' button. This time after hanging out for a while it went to 19%. But then it failed AGAIN! If I try again it just stays at 19%.

I figured that maybe the server is overwhelmed. It was 9pm EST or so. I tried again here at 5:15am figuring that most of the US is in a coma at this time. Same results.

Any ideas on how to get this SP? I'm plum out of ideas!

I'm down for anything, just to get this to work! Why did they have to change the way SP where handled? The d/l from a URL was just fine!

View 9 Replies View Related

Sfc/scan Now - Stops At 76 %

Dec 31, 2009

Problem: sfc/scannow stops at 76 %, gives no Info just that it can not
perform the requested operation

it started when I Restored the System to Factory Install with the Discs ( 2
Discs) sent to me by Acer by mail
SP 1 is already on the Discs, all Updates installed successfully, including
SP 2
Event Viewer shows some Errors but don't know witch are associated with the
sfc/scannow

Problem Reports and Solution (reports but no solution found)

1.-
Problem signature
Problem Event Name:WindowsWcpOtherFailure3
OsVersion:6.0.6001.18000:1
File:basewcpsilmergedtutsystem.cpp
Function:Windows::Rtl::SystemImplementation:irectFileSystemProvider::SysReadFileLine:1920
Status:c0000011
StackHash:0x563c8df4
OS Version:6.0.6001.2.1.0.768.3
Locale ID:1033

2.-
Extra information about the problem
Bucket ID:182505946
Problem signature
Problem Event Name:CbsPackageServicingFailure
Stack Version:6.0.6001.18000
Package:Package_for_KB973687~31bf3856ad364e35~x86~~6.0.1.1
Status:80070026
Failure Source:Execute
Start State:Resolved
Target State:Installed
OS Version:6.0.6001.2.1.0.768.3
Locale ID:1033

Extra information about the problem
Bucket ID:769551469

I suspect that its related to the CBsPackageServicingFailure or both or more
don't know where to go from here
would really like to get sfc/scannow working Email with Acer America this Computer is still under Factory Warranty don't know what it covers, but they DON'T want me to return it to Store in Winnipeg where I purchased it don't know if I been screwed, this computer (LapTop) does Not have a Recovery partition, it has 1 disc C and 1 partition 232 GB (my Emachine Home Basic Desktop did have a Recovery Partition on D)
the Store made me set, 2 Discs after I complained and Acer sent me a set, 3.

Discs after some Emails already been at the store they are slick and have few answers , don't think I'll get far at the store.

View 9 Replies View Related

WMP Stops Working

Dec 29, 2008

Just starting this afternoon whenever I go to view pictures, WMP stops working and shows this message:

Problem signature:
Problem Event Name: APPCRASH
Application Name: explorer.exe
Application Version: 6.0.6001.18164
Application Timestamp: 4907e791
Fault Module Name: PhotoViewer.dll
Fault Module Version: 6.0.6001.18000.....

View 4 Replies View Related

Stops In Outlook

Mar 23, 2008

When I open outlook, vista stops running after a few minutes Whenever I work in Oulook safe mode there seems to be no problem. This started after I downloaded SP 1 Someone experience?

View 4 Replies View Related

IE8 Stops Working Opening 2nd Tab

Oct 1, 2009

I get "IE8 stops working" messages whenever I open a second tab, this problem started after enabling "Google Chrome Frame" Add-on. I like to keep this Add-on as it makes IE8 faster, I would appreciate any workarounds to resolve this, I have attached some info from event viewer.

View 3 Replies View Related

Explorer.exe Stops Responding

Oct 6, 2009

Over the past few days my Windows Explorer has begun to give me trouble. Stops responding several times a day. I've been through the Reliability and Performance Monitor and the Event Viewer and cannot find any specific correlation with installs or hw, sw changes. Most, but not all, of the errors seem to be related to ntdll.dll and encoders.dll. I can search for the specific error codes one by one, but since there are several, I thought there might be an easy way to check or re-install Explorer.

View 9 Replies View Related

WMP Stops Working When I Try To Play A DVD

Feb 19, 2009

Greetings, I just formatted my new computer and when i try to play a dvd with WMP it loads the dvd and goes to a black screen and thinks for a moment, then a windows box pops up and says that WMP has stoped working,"we will look for a solution to this problem"

"This problem was caused by *NVIDIA nForce Networking Controller*,which was created by *NVidia*.

A newer version of this product is available that might solve this problem."


I believe that suggests that i reinstall my nvidia drivers, which i did, but it didnt work.

I have no codec packs installed either

Before the format everything worked perfect but i was having pop up problems and i think i had a virus of some sort.

HERE IS SOME MORE TECHNICAL INFO:

OS: Vista 32 Enterprise
Graphics card: EVGA 9800 GTX +

Product
Windows Media Player

Problem
Stopped working

Date
2/19/2009 7:42 AM

Status
More information available

Problem signature
Problem Event Name: APPCRASH
Application Name: wmplayer.exe
Application Version: 11.0.6000.6344
Application Timestamp: 46e5f12e
Fault Module Name: StackHash_5255
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c0000374
Exception Offset: 000af1c9
OS Version: 6.0.6000.2.0.0.256.4
Locale ID: 1033
Additional Information 1: 5255
Additional Information 2: a75fd876183f6f3219cdd8086d3ff68b
Additional Information 3: 9767
Additional Information 4: b9e147287e4dfdd53aff7aa96f91c5f1

Extra information about the problem
*Bucket ID: 529184598*

View 9 Replies View Related

Clock Stops /ur Stopper

Sep 11, 2009

I just got a new HP pavillion dv3 with vista home primium. But every time the computer went to sleep the clock and date stopped. I could not find out why, tried to remove sync with internet but nothing helped. But then we tried to correct the time and date ind bios and now it works Don't know why but it does. So if anyone else have the same problem I think it is worth trying.

View 0 Replies View Related

DEP Stops Me From Playing My Games.

Jan 27, 2009

with all the latest games I have bought (gta IV and mirror's edge) I get DEP errors. I tried to exclude them from DEP but my vista won't accept it. So now every ten minutes my games freeze up. What can I do about it? I've read some artikels about shutting of DEP completely. I'm wondering though what that will mean for my security. On some other forums it has been implied that the DEP errors have something to do with faulty hardware.

View 9 Replies View Related

DVD Clone Stops Burning At 99%

Jan 6, 2009

I am trying to run Easy DVD Clone on a vista computer. The decryption happens through a DVD Fab software which transfers the video ts folders to a location that Easy DVD Clone can then read from. The initial process works fine and it transfers the files to a temp location but then when it tries to burn it to a DVD, the process stalls at 99% and right after I get the pop-up window stating "Easy DVD Clone has stopped working". This happens with all DVD's. Do you know why this maybe the case and if this a vista related issue? I have already disabled my virus protection software as someone has suggested somewhere that it may cause a problem and I also deleted some other dvd burning softwares that I had on there but the result is much the same.

View 7 Replies View Related

Stops Printing When IP Address Changes

Mar 23, 2008

I'm using Vista Home Premium. I have a Brother 5170DN (direct network connection) that has been working fine with my older computers running earlier Windows versions. The trouble is that when the IP address of the printer changes, Vista is no longer able to print to it, so I end up having to reinstall. The reinstallation adds a new TCP/IP port into the driver, and then it works fine until the next time. Since my network is changing frequently right now, due to reconfiguration, this is a pain.

View 6 Replies View Related

Upgrading To Windows 7 Stops At 62%

Nov 1, 2009

I just received my upgrade Windows 7 disks. Ive followed the steps and everything appears to be ready to upgrade for vista... Ive tried the upgrade process 2 times and both times my computer got to 62% of the final part of the install and sat there from 11pm until 730 am. what is the problem? bad software?

View 6 Replies View Related

Rundll32 Stops Working

Sep 27, 2008

I am on windows vista sp1 home premium, and I often get a problem saying rundll32 has stopped working. I googled and found out that this is often caused due to nero's codecs which interfere with vista, but I have neither nero nor roxio installed, except that I use the latest version of vista codec pack. I just checked out by disabling startup services in msconfig and rebooting each time, but it's all the same every time, the problem just keeps repeating. I often get the problem on resuming from standby.

Can anybody recommend a solution? BTW, i am on an HP Pavilion dvt6846tx. Problem log from "Problem Reports and Solutions":Product Windows host process (Rundll32)

Problem
Stopped working .........

View 7 Replies View Related

System Slows Down Until Stops It

Sep 21, 2008

I have a Asus pro80 series laptop with Vista 32 bit. I connect using the ethernet Lan. Uptil about one month ago averything was fine. Since then my Connection after about 10 to 20 minutes slows right down until it stops. It dosn't actually disconnect from my provider. it just stops. If I dis-connect and re-connect then it will work again for a while. Then stops.

What I have tried so far: Updated the drivers for the realtek ethernet. Reinstalled Vista Installed the vista service pack 1 Checked power settings for the ethernet card. Other info: I know that the connection its self is ok as i use the same cable for my works laptop without any problem. Hardware manager says all is running correctly Changing user has no impact.

View 7 Replies View Related

PC Run Runs For 1 Min. And Stops For 1 Min, Starts Again

May 4, 2008

I have Vista Home Premium. My PC has recently started running a lot. Sometimes it runs for 1 min. and stops for 1 min. then starts again, does this over and over for a long period of time. Sometimes it runs constantly. Other times when it is in sleep mode it just runs constantly also.

View 5 Replies View Related

Windows DVD Maker Stops At 98.8%

Apr 20, 2009

I have an HP Pavilion Media Center m8200n PC with Windows Vista Home Premium 32bit. The problem is with publishing from WMM to DVD using Window DVD Maker. The encoding process goes fine but once it begins to finalize (98.8%) the DVD will eject and then it gives me the message that it cannot complete the burning process due to an error but it doesn?t tell me what the error is. The only thing mentioned is to check the burner and make sure it is connect properly. I should mention that I have an internal LightScribe burner (ATAPI DVD A DH16A3L SCSI cd Rom device). After spending the better part of a Sunday afternoon I tried using only a LightScribe DVD and that worked but in the past I have been able to use any brand DVD.

View 5 Replies View Related

MSWMM Stops Encoding

Jul 29, 2009

Using Vista Home Prem. I have made a dvd (and it played fine) that contained pictures with
music background and transitions using MSWMM and Windows DVD Maker. I've done the editing for a video dvd (about 1 hr 59 min) but when I try to encode I get an error at about 28% complete and have to cancel the encoding.

View 6 Replies View Related

Games Stops: No Error

Aug 28, 2008

My operating system is Windows Vista Home Premium 64 Bit with SP1. The computer downloads the majority of BF2 until the end of the 3rd cd then stops and doesn't say error or anything. It won't allow me to download a patch for BF2 either because it can't specify the file BF2 is in. When I start BF2 it says it can't start up because some file wasn't found and I have to reinstall the application. Which I have tried mucho but won't download the whole shin dig. In the quick info of BF2 where it has the minimum system requirements it doesn't recognize the OS and says that requirement failed but everything else is just peachy.

View 5 Replies View Related

System Stops Functioning

Mar 19, 2010

I have a Fujutsu Siemens Amilo Pi Laptop.. I run Vista Premium Home 32 Bits. Service Pack 2. Intel Core 2 duo CPU T7100 @ 1.80 GHz 1.80 GHz Memory: 2GB. But everytime when i'm working on it for a while it stops functioning.. ( for about 30 minutes ). I went to a computer shop and said they would fix it for me.. but when i got it back they said everything is working fine. does anyone know how i can fix it myself? I think it has something to do with my hard drive.. cuz when i'm working in office word i save it multiple times but when i open it later i find out it haven't been saved for a while..

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved