I have an HP Pavilion Media Center m8200n PC with Windows Vista Home Premium 32bit. The problem is with publishing from WMM to DVD using Window DVD Maker. The encoding process goes fine but once it begins to finalize (98.8%) the DVD will eject and then it gives me the message that it cannot complete the burning process due to an error but it doesn?t tell me what the error is. The only thing mentioned is to check the burner and make sure it is connect properly. I should mention that I have an internal LightScribe burner (ATAPI DVD A DH16A3L SCSI cd Rom device). After spending the better part of a Sunday afternoon I tried using only a LightScribe DVD and that worked but in the past I have been able to use any brand DVD.
I have tried two different programs. The vid starts to capture, showing the preview, then everything stops (preview wise and capture wise). Video drivers? Bad fire wire?
Every time I try to use movie maker (Vista) to publish my movie as an avi file to the computer, movie maker stops responding (locks up & greys out) and produces the check online for a solution and restart the program. the fault module is "StackHash_1703"
Everytime i try to publish a movie that i have created, movie maker stops working. Please forgive me as im not particularly tech savvy. Here is the problem report;
Problem signature Problem Event Name: APPCRASH Application Name: MOVIEMK.exe Application Version: 6.0.6000.16386 Application Timestamp: 4549b5b6 Fault Module Name: StackHash_1703.....
After I press publish my movie that has a mix of videos(all .wmv) and audio stops working and a screen shows up saying the following: Windows Movie Maker has stopped working....A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I was just wondering if anyone else had experienced these annoying freezes that occur randomly in Vista 64. It can happen while I'm playing a game, it can happen while I'm browsing firefox etc. I freeze up about 4 times a day and the only solution is a hard restart.
It is beyond me, I have the video card drivers up to snuff, all updates are installed, virus scanners/spyware scanners, video card isn't overheating, CPU idles at 33 loads at 42. I'll describe the problem a little better other than to just say it's freezing. When the freeze occurs, the entire screen stops moving, I cannot move my mouse, all sound stops working, and if there was a sound playing, it will get mutilated into a nasty buzz.
apon using windows update, it froze around update 25, and windows modules installer stopped working. Now i have a issue with the windows licensing service, one second my windows is legit, the next it isnt, the next windows licensing stops working. I've tried to reinstall 5+ times now, on 2 different harddrives, and it does the same thing on both
I just received my upgrade Windows 7 disks. Ive followed the steps and everything appears to be ready to upgrade for vista... Ive tried the upgrade process 2 times and both times my computer got to 62% of the final part of the install and sat there from 11pm until 730 am. what is the problem? bad software?
I keep getting the "Program has stopped working" message with either of these programs. I have cleared all 3rd party drivers in the "Compatability" section. I have a recollection that Nero 7 can interfere with these programmes, but cannot find the article in the Discussion Group I cannot find any details regarding constant crashing of the program anywhere. I am running on Vista SP1
I have premium vista and i've used movie maker to create a film containing only video. when i try and encode it to wmv (dvd quality) it starts ok then just hangs half way though encoding. So I tried to burn it to DVD instead - DVD maker opens and I made a menu then clicked burn. It starts and makes one pass of the encoding progress bar. It then returns to zero and says buring and goes to 0.6% before stopping there. Both applications are running in task manager and respond to minimize/maximise/close etc without problems. my cpu use is low and I have free ram. I have tried different media and slowing down the burn speed, all to no result.
Symptom: IE 7 crashes or encounters a webpage it doesn't like (certain ebay webpages for instance). Wireless networking stops working (red X in network connection notification icon). Thereafter the ONLY way to get Vista to see any networks is to reboot. FPITA. Refresh wireless network list does NOT work. If IE7 doesn't encounter a webpage it doesn't like, can stay connected to my wireless network all day long.
Every once in a while when I try and send an email the message is lost and Windows Mal stops working and then restarts. Now I have to save all my messages in Microsoft Word before I send any email on Windows Mail in case this happens!
I've been seeing a consistent problem with Windows Mail lately,the version for 64-bit Vista Home Premium SP2. Whenever I try to enter a storage folder with 126891 unread news messages (mainly to divide up the contents of the folder), Windows Mail stops working correctly and offers me a chance to send in more information along with the bug report. When I enter a different folder with 73181 unread news messages, things are a little slow but otherwise normal. Some of the other problems I've seen on the same machine suggest that a collection of programs compiled to run in 32-bit mode cannot make full use of the 8 GB of memory this machine has; only the lowest 4 GB, all that 32-bit addresses can address directly. Is it true that Vista lacks the memory mapping needed to run 32-bit mode programs at addresses above the lowest 4 GB? Also, is is true that the version of Windows Mail that comes with 64-bit Vista has at least some part that must run in 32-bit mode?
When I have a set of BOINC programs running, with permission to use up to 4 GB of memory, it could easily come close to exhausting the lowest 4 GB of memory, since most of the BOINC workunit programs were compiled to run in 32-bit mode. However, neither BOINC nor Vista seems to offer any memory restrictions specific to the use of the lowest 4 GB. I've seen enough problems reported in the microsoft.public.windows.live.mail.desktop newsgroup with the Windows Live Mail user interface that I'm hesitant to consider switching to that program. In particular, some of the problem reports refer to functions controlled with buttons labelled only with symbols, not with words. Since I'm rather slow at learning the meaning of symbols not labelled with words, I want to avoid using any programs that use such symbols. Does the WLM program have the option of making labels of the symbols appear in words, perhaps only when the cursor is close enough to the symbol? Or, is there any other workaround for splitting up such a large folder of unread news messages?
i have reg. mechanic 8 installed on my p.c. vista 32 bit .every time i try to start the program windows stops me and says it has a problem. i had it on my p.c. befare and it worked fine. when i restart my pc i see conflicts with anti-malware and windows defender interfering with the reg. mechanic from starting. the web start says the program has no conflicts with other software. would it be my anti-malware program a-squared be the one doing it?
Nothing special but, it's a lot better than what I have now. What I would to know is if anyone knows what bit version of Windows Vista Home Premium the HP A6300F ships with, whether it's the 32 or 64 bit?????? Also, I would like to know if it supports Windows DVD Maker? Lastly, does it's dvd drive support all types of dvd burning or do I need other software also?
I'm working in a project and when my project is on storyline I can see the pictures that are in the movie but when it is on timeline there are no pictures. What is wrong with my computer
I’m having trouble creating a DVD from AVI files using Windows DVD Maker, When I try and Import an AVI clip into DVD Maker I get a message pop up that says file type is unsupported or corrupt, it does this for all my AVI files, My hunch is that I do not have the correct codec’s, if so does anyone know what codec’s I might need and where to get them from, DVD Maker does support AVI files right ?
My ultimate aim is just to get my AVI movie files onto DVD (for playback on a standalone player) so do not necessarily need to use DVD Maker just thought it would be easier using a built in Microsoft app
We all know about the "Windows .... has stopped working" then it says something about Data Execution and there is a problem. I cannot import .avi files into movie maker nor can I save files. I can import .wmv files and a few others but I get the error whenever I try to import .avi files. For DVD Maker, everything works fine until I try to burn and encode. It'll remain on "0.0 for encoding" and then the error will come up. It's not just .avi. I can't publish any videos.
I've read everywhere that Nero can cause problems and DivX. I do not have Nero and I have the latest version of DivX which I've uninstalled before. I've also tried removing filters from movie maker's tool options. Nothing has worked.
I bought the wife a HD video camera for Xmas, it records in mp4 format. What do I need to convert this to a format that I can play with it in windows movie maker?
The last (2) E-mails I was composing were lost when I hit: send. (No had not saved. Will begin). Message sid program stopped working-crashed. to correct?
my laptop screen stops working when login to windows (when in normal boot mode). So when i boot in safe mode it does work! also i don't know when it stop working in vista since i normally always work with my tv, you see and rarely switch back to my laptop screen. so what i have tried so far: reinstalled the VGA drivers fn+f3
I tried and tried to publish my holiday movie to DVD. It never reaches the finish on publishing and freezes around half way. I transferred it from a SD card and the file is VMP. I'm sure WMM is working ok as I have been successful at publishing a sample video that came with the PC. Really would appreciate some help as I'm getting very frustrated.
i have a relatively old (but working) movie recorder which records in mp4 format. it plays back fine on my pc (with the klite codec pack installed - otherwise it doesn't) but whenever i try to upload any video to Internet or edit it in movie maker, the picture is mis-aligned. i seem to only get the top left-hand section of the original video. it's like the recording has zoomed to the top left-hand quarter/third - which obviously ruins the recording. the original if fine (i see the whole picture) but whenever i try to do anything with the video, i get this weaird effect.
I have this promblem with one of my projet on Windows Movies Maker. After I am finished with my editing I go to publish my movie. It starts going through the process but on the Publishing progress window, it stops at 98% and just stais there and it never finishes the publishing. Has anyone ever had this problem? Why does it do it? and how can i fix it?
I tried several searches but am unable to find out if you can adjust the DVD writing quality in Windows DVD Maker. I would like to have the best video reproduction quality as possible on the DVD.
I normally use Windows DVD maker to burn movies and for some unknown reason, it just won't burn :/ So, in order not to wait forever for the encoding stage AND finding out I still have a burning issue, I then founf a program called 'ConvertxToDVD' which I'm sure your familiar with. Encoded my movie perfect, but same problem, will not burn, although, it did get to something like 48% but then spat it out. I don't understand why its doing this as I have never had this problem before hand until now (my luck only) and to top things off, my DVD+RW won't erase.
I browsed the internet and came across this website to do with IDE/SATA and my properties wasn't the same as this persons. Instead of showing 'Master'and 'Primary' mine shows 'Port 0' and 'Port 1' -surely there's something wrong?
Is approximately 2 minutes long with audio and there are about 20 clips with effects and a few transitions. some of the original avi was uncompressed. all the clips are avi. it got to 62% pretty quick and then the timer started going up. it is now up to 583 minutes since about 4pm yesterday. I know it may take some time but it this normal. I don't want to stop it if it is just compressing. I am outputting avi to 49mb size as i did not want to loose quality. I have a deadline. I'm not getting an error message. The minutes just keep increasing and the progress bar just staying at 62 percent.
