Although I see the mapimail link in the SendTo folder, it no longer shows up when I right-click an item.
I created a guest account: in that account, it is still functioning.
I tried to copy the mapimail link of the guest account and paste it in the main account (just in case it was corrupted): nothing!
The possible cause being that I changed the default association of the .mapimail files from "unknown application" to Thunderbird, I tried to restore it to "unknown application", but nothing happened.
I tried some other solutions from other threads as well as from other sites, but I didn't get to a solution.
Vista Home Premium, SP1
I am unable to attach a photo to e-mail from Windows Explorer in Vista. I use MS Outlook as my default mail. For example, with a photo, I right-click, select "Send to....Email Recipient", select size, slect "Attach", it goes through "attaching" the files but then nothing happens. A mail window does not open. I have set all my defaults to Outlook yet still nothing happens and not quite sure what to do.
After sending an e-mail to a large group (130 addresses in total divided on 6 emails) my emails seem to be blocked. I can't send any more emails to anyone, regardless of the size or number of reciptients.
I only receive a message from System Administrator saying: "Undeliverable: Your message did not receive some or all of the intended recipients. Recipient address rejected: Policy Rejection- Quota Exceeded." I need to be able to send e-mails again
I should know better, but I make the same mistake again and again when I am absorbed in my work. I right-click on the document I want to Send to/Mail Mail Recipient, and find that what I had selected was NOT the document, just a LINK to the document.
Is there any way of activating a user option to chose, at that moment, between the link and the underlying document? Vista has plenty of exasperating UAC serial popup messages (eg five clicks just to do a Disk Cleanup), but a warning/option in this case would be welcome. Perhaps this feature is available and I just need to enable it?
As per an example I created a batch file with the following line: DIR %1 /O >LPT1: I placed the file in the SendTo folder but nothing happens when I right click a folder PrintDir.bat which is the name of the file.
In Windows Vista Ultimate SP1, every system drive (partition) is listed in my SendTo menu even though the C:Users\%USERNAME%AppDataRoamingMicrosoftWindowsSendTo folder only contains the following (defaults):Compressed (zipped) folder Desktop (create shortcut) Fax Recipient Mail Recipient I my case there are 14 drives including A;, C:, D:, etc. The SendTo menu is too busy.Is there any way to get rid of the list of drives in SendTo?
I have had several customers tell me they cannot reply to my emails and they have to open a new email to communicate with me. This is a huge concern! Any ideas out there?
Under vista I no longer get an address or selection of possible addressees after typing in several characters of the recipient's address. I was told previously in this forum that this would happen after I entered the addressee's name three times. I've done that many times over and still no auto recognition.
Whenever I send out an email with a picture or any kind of attachment including word documents through Windows mail, it says the email was sent, but it isn't being recieved by the recipient. Then I get a Norton symantec pop up saying this problem does not occur often, their support team have not been able to reproduce the error, and it also says that the error message is actually caused by a problem on the cpu itself. When I clicked the "run it now" button to run a Symantec administrative tool it states that I must be logged into an administrative account to complete this action, but I am! The only info it gave was this: Module 1003, Error ID 9, Build Symantec. I have Norton Antivirus 2007 and I ran a full scan and I don't have a virus. I'm about to throw this cpu out the friggin' window! Is there anyone out there who knows why it's doing this? My last resort is to bring it in to the geek squad to see if they can fix it.
I am using Vista and Windows Mail. When I try and attach a word or excel document (from 2007 suite) it does attach to the email, but the recipient does not receive the attachments. I have sent myself test emails and indeed an email arrives with no attachments (and yes...all the docs are closed in word or excel). I have sent as .docx and also as .doc and neither arrive..the only way they do go is if I zip them first in a folder and then send them.
I now have vista and on my old computer with earthlink software I was able to have a recipient added to my address book when sending mail. I have searched windows mail and cannot find where to give this command. Consequently people responding to an email from me have to go through the spamblocker and are not in the address book unless I put them in separately.
This may be a Office 2007 question. I use Windows Fax & Scan and Outlook 2007. I am unable to choose a recipient from Outlook 2007 Contacts correctly to use in Windows Fax & Scan. When I click on the To: Button in Windows Fax & Scan I only get three columns shown. Name, Display Name and E-mail Address. If the intended recipient does not have an email adress their name does not appear. What am I setting up incorrectly. I can not see an option in Windows Fax & Scan. Is it a Outlook setting.
Can someone tell me how to delete contacts from the recipient list.This is the list that comes up when creating new mail,when you click on "to"in the new email.When I remove alll details after clicking on properties "unknown"is left behind.I now have a huge list of "unknowns" in my recipient list.
When sending emails on Windows Mail the full email address and name of the receiver are displayed on the header. The old system i used had a "display as" option and all that it showed was the persons name or nickname. I usually send mail using the BCC option to hide identities so i know that its not a big deal but its driving me mad. I know that there must be a way of changing it to just show a name.
I can't send any attachments using the "send to recipient" function. I need to send pics in email size but when I right click and push send to mail recipient it asks what size (I choose the size) and then I click attach and it acts like its resizing the picture but then just disappears...it never gets attached. just goes away! It's the same for any attachment.
My main mail client is my office XP system, I also receive mail in home. So I select the 'Leave mail on Server' in my home XP system and it work fine. But after I upgrade my home PC to Vista system (I export my mail account for XP outlook express then inport it to my Vista system.) then it have problem - when the mail that I received in home Vista system Windows Mail then i no longer can receive in office mail client. Does anyone know is it the bug of Vista Windows Mail?
Every time I open Windows Mail it will erase all my SBC yahoo mail. I go to Yahoo Mail and all my e mails are gone. How can I change my settings so it doens't do that anymore?
when i get mail useing mail washer it opens mail program but mail dosnt down load. i have to click send and recieve. ive not changed anything. ill not really worry as win 7 next week but was wondering if any one had a clue
I am not able to send a invitation for a meeting. Furthermore I am not able to send this meeting by e-mail. Furthermore I do not want to register for any support community in the world wide web to get a solution for such a business critical issue. what can cause that I am no longer able to send meetings by E-Mail or to send invitations.
For the last couple of weeks when I receive mail with attached pdf files, if I try to move or delete the mail Windows Mail hangs. Sometime it recovers but otherwise I need to kill it. I can open the attachment by clicking on the paper clip etc and everything seems fine so I don't think it's a security thing.
Using Easy File Transfer, how can I transfer just my e-mail settings from OE6 to Windows Mail? Everything else I "need" to move I can move by other means that I have already tested. E-mail is my only problem child.
i just installed the latest windows live mail beta software client and i wanted to know how do i get junk mail to be displayed automatically ? before it would show automatically on the layout of the reading pane to the right of the message list but now i have to click to open them because they wont show in the reading pane like they did before
I have Yahoo plus mail account and Microsoft Windows Mail receives mail but when sending it gives the following error. I've tried troubleshooting from the Yahoo mail help but nothing seems to work (for example, changing to port 587, turning on SSL). It was working fine before. Subject 'test', Account: 'plus.pop.mail.yahoo.com', Server: 'plus.smtp.mail.yahoo.com', Protocol: SMTP, Port: 25, Secure(SSL): No, Error Number: 0x800CCC19
Windows mail deletes my mail after reading and closing the program. I have Kaspersky internet security with the spam blocker disabled. This started yesterday two days prior to this I installed SP1
I've tried using Control Panel where I can't find Windows Mail as an option for default e-mail handler.
Tried changing by accessing Properties from Windows Mail but when I change to "Make this the defalut e-mail handler, apply and save then exit and return to Properties the setting has returned to Not the default e-mail handler.
I'm using Windows Vista Home Premium.
Note:
Control panel does show Windows mail as being the Default Newsgroup handler.
cannot get links to open in windows mail. some are public mail such as nascar, and, some are orivate emails from friends, when i defaults, it says 2 out of 3 are working. i have to keep resetting default.
I am having trouble downloading mail from my isp pop3 account. I receive the following error message:
Account: 'm.cabourn@ntlworld.com', Server: 'pop3.ntlworld.com', Protocol: POP3, Server Response: '-ERR invalid user name or password.', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92
Up until about 5 days ago I could retrieve mail from this account but I now cannot