I've had some trouble with my computer and I'm not sure if it's ram problems or graphics or anything. I've had the following problems: Vertical very thin pixel lines that show up random places nvlddmkm has stopped responding and recovered. And within the last 2 days it's done it 3 times, I'm having my screen go blank with random colors. Green, White, and then the last is black that goes away and comes back like the monitor is trying to reset itself. Always black tho. I have to restart in order to get it to reboot. So I'm thinking I have bad ram, my monitor is a Westinghouse 17" Flat panel I got in 2005. My graphics card (8800GT) is about 11 months old.
I've had voltage issues causing my computer to freeze or reboot during games and dvds. Fixed that and the computer was fine after memtest showing no problems. That was late Dec.
A few days ago, the computer would go to a blue screen saying it's dumping physical memory and then automatically reboots. Thinking my harddisk might be collapsing on me (I have a seagate barracuda 7200.11 500Gb HD with the SD15 firmware, the infamous crash friendly HD), I flash the HD with the SD1A firmware from seagate, then it was fine. 2days later, Catalyst started to cause problems by not responding, so I formated the drive and reinstalled vista ultimate, along with Catalyst, drivers from Mobo manufacturer ASUS, plus a couple of other softwares. That was yesterday, and now I'm getting the same blue screen back, or the computer just freezes.
I have the following issue and hope that somebody can give me a hint about what might be going on! My system has two raid 1 arrays - one is running on XP Professional SP3 the other one is running on Vista x64 Ultimate SP1. When I start my virtual machines (either from the Virtual PC console or when double-clicking the *.vmc files) than everything is working fine on XP and the virtual machines are booting and running as expected. However, on Vista the following is happening (and I hope somebody has an idea):
1. Starting the Virtual machines from the console leads to an immediate reboot of my host machine (I can't even see any boot screen of the virtual machine - it is like clicking start in the VPC console -- > reboot of host).
I've ran BitDefender Total Security 2009 and got off a few trojans, ran Spybot and got a few as well. I've also ran the cmd prompt command sfc/scannow (with no issues), but I am still getting a blue screen after I shutdown. After it automatically reboots, I get a Windows prompt saying it has recovered from an unexpected shutdown, here is the report: I've zipped and attached (the attachment system doesn't seem to work, so I uploaded it to MediaFire) all of the files that it says could help describe the problem. Here is the download link: 'systemfiles.zip'
i have both Vista and XP in my system with Vista in C drive and XP in D drive..i want to work in full screen mode of XP.. but in vista i cant do it...So each time i have to reboot my sytem and get into XP to do so..so if i can load already installed XP on my vista, it would be helpful...can anyone help me out..remember that i have installed XP and Vista already and i am not using any Virtual PC kind.
After today's windows update I've been experiencing many blue screen, especially after the reboot. I don;t get any in safe mode so I guess it's a driver problem. This is the minidump created on my system. I have 7 of them and they all seem to be the same.
Code: ADDITIONAL_DEBUG_TEXT: Use '!findthebuild' command to search for the target build information. If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols. FAULTING_MODULE: fffff80001c1b000 nt......
Can anyone explain why Windows periodically freezes when the screen saver is running? At first I thought it was due to the Windows Live Photo Gallery. After running for several hours (overnight, for e.g.), it would freeze on one picture. Usually moving the mouse would eventually close the screen saver and I'd return to the desktop.
I then changed to a regular screen saver, Mystify. Usually this isn't a problem, but today when I moved the mouse, the screen saver froze. I couldn't soft boot, actually had to shut down manually. This is the second time this has happened.
I've checked whether I'm using the latest video driver using device manager, and it says everything is up to date. I'm using NVIDIA GeForce 6150SE nForce 430, driver version 7.15.11.7530. Could there be a device conflict? How would I be able to tell?
I recently built a computer with a SATA hdd and a IDE disk drive. I had also bought vista ultimate 64 bit. I cannot install vista. the screen just freezes, about 20-50% through the expanding files part. when I boot the hdd up, I get the missing bootmgr thing, several times. I tried the tip by lifehacker to use the repair settings thing. I cannot seem to install vista. I even tried to make a copy of the dvd from the comp I am typing with now.
I'm having a problem watching videos. About an hour into a movie, I lose the video. My laptop freezes up and my screen goes black, although I still have audio. I have to power it down and then restart Windows normally. I have NVIDIA GeForce GO 7150 graphics w. 1071 mb shared video. It is set to "Let 3D Application Decide". Can anyone tell me what I need to do to stop these abnormal shutdowns?
I have a windows vista that boots OK, but after about 30 minutes the screen becomes a bit distorted and the PC freezes. I cannot move mouse/keyboard nor can I ping it. In safe mode it doesnt lock up.Trying to find where to look. I have disbaled most startup apps and it still locks up in normal mode.
I am having problems with my computer randomly crashing. Didnt have a clue what was causing it. So I decided to: update all my drivers that I could think to update (used device manager to do so). I cleaned my computers inside. Updates my virus scanner - am protected. (Avast) cleaned my registery (I used a downloaded registry cleaner from a computer magazine website, they reviewed it, and i tried it) Disk Defrag used. Finally found some info when my computer crashed. Went online to find information and got some software that helped me get more info about my problems. (see attachments)....
I was trying to install all my old software but I have recently come across a problem that I need some assistance with. When I try to install this software DVD Copy Software from DVDFab | Copy DVD to PSP, DVDR or iPod it starts the install, confirms that I want to install it and then the screen dims and basically freezes. I go to the task manager and it doesn't list the install on there, but when I cancel out of there it has cleared up. I know that this software works on vista from the manufacturer. This has happened with a few install attempts.
I am trying to boot into my Windows Vista Operating System, and it seems to freeze before the Welcome screen appears, is there a way that I can fix, this, the problem started straight after I had uploaded some pics from my Digital camera, I had already scanned the hard drive and I only found trojan horse virus in it, which is only one virus, can there be any other way to fix this?
This computer ran Vista x64 fine for over a year. I sold it to brought it back to me the other day stating it started up, but just a black screen. First thought was power supply. Replaced the power supply with a 500 watt Thermaltake. System POST's. Gets to windows screen with the loading bar. Freezes. Decide to re-install thinking maybe there was too many unsucessful boots.
Install is VERY slow. Never have I seen it do this. It takes forever to get into the language screen. Finally once installed, Freezes at the windows screen with the loading bar underneath, yet again. Fooling around, I popped out the CMOS battery and cut all power to the system (Resetting CMOS, yes I know I can do it via Jumpers as well but I dont have the manual handy) and low and behold once I replace the battery and reboot I get into vista. I shutdown, restart to see if everythings all set. Frozen at the windows loading bar screen again...............
I recently received The Orange Box, and wish to play Half-Life 2. I am running a Vista Home Premium x64 machine updated to SP1. However, whenever I run Half-Life 2, either from within Steam or from a shortcut, Half-Life 2 starts, adjusts the screen resolution, and freezes on a black screen with a frozen Taskbar at the bottom of the screen. I have added "-32bit" to the shortcut line and have set the program to run in Windows XP SP2 compatibility mode. This fix has made Portal run fine, so I don't know why it won't work for Half-Life 2.
Windows Vista freezes I have geforce 8600 graphics card. System works perfectly with 2 gb, but if I try to use 4 gb or 6 gb, i get graphic glithces and screen goes black / system freezes. Does anyone know how to solve this problem? It's driving me nuts
whenever i enter a game in Cs : Source it lets me stay in for about 1 min then my monitor freezes and crashes to blue screen (error nvlddmkm.sys) or comp stays frozen.. i have to restart the hard way.
1. when I play games (quake4) and watch dvds, every now and again (more often with games, sometimes with dvds) the screen freezes and I have to reboot by reset button (nothing else work). As my PC is new, I don't know whether it's a hardware or software problem.
2. I have MS Office 2003 loaded, and again the Word would stop responding every so often and sometimes it restarts, sometimes it doesn't.
3. Finally, a few programs, especially catalyst, would stop working as soon as boot up is completed, but again, this happens only at times. To top it off, sometimes vista will reboot itself automatically, as if I pressed the reset button.
I've checked Bios updates from Asus, and while there are newer updates, they don't seem to be for the problems I'm having, and my realtek driver is the latest version (I've compared my version to what's on Asus' site)
Every time I run a Windows Vista Memory Diagnostics and it completes and gets ready to boot back into Windows it freezes on the blank screen with the progress bar running? While Windows Memory Diagnostics was testing it didn't report any errors and memtest64 also didn't report any errors.
I have new computer, but about two week after purchase this problem started. The screen freezes with a Yellow and white checkard effect, then goes black. The computer is still running but not the screen. The only thing to do it hold the on off button on the tower and reboot. This happened a few times, and I was going to contact my supplier. Then it stopped for about two weeks. But it has just happened again?
I recently used a VISTA compatible utility (TWEAK VI) to sort and clean my registry. I then added several new applications, including Office 2007. My system has now become very unstable and often freezes, does a blue screen data dump, or just shuts down with no explanation. I am to far removed from the registry clean to reach a restore point for it, so I am hoping there is a repair option on the VISTA install disk, like the XP disk has. So far the only option I find is to reinstall the whole program.
I've an Asus f5sl laptop with Vista Home Premium (32bit) but it's been freezing on me lately. When I boot up, it gets to the black screen with the green bar but after a few seconds, the green bar freezes and I can't log in. Occasionally it boots up after around half an hour but then Vista periodically freezes for a few seconds before resuming (which is annoying when trying to write out something etc)
I don't see any problems in Safe Mode so is possibly a driver? I've updated all my drivers, completely updated using WIndows Update, ran antispyware, used System Restore etc. Only problem is; I've moved to a new country, and like a fool, I left my Vista start up disk back home. Which I would otherwise have tried.
so im not a computer expert and I just got my computer a few months ago. Recently I donloaded Skype 3.6, but i never knew it wasn't for Vista, so it messed my computer up. I deleted it, but now my right click dosnt work, only my touchpad and my computer it 100x slower. Someone told me i should just reboot my computer, but no matter what i try it dosnt reboot, any idea's on how to reboot??
I have had this issue for many months, now. I loaded Vista x64 Home Premium to run in a dual-boot configuration with my XP Pro. I do critical work so I didn't trust going to Vista exclusively. I mainly wanted it to see if I could utilize all my RAM and speed up Photoshop processing. I have had it working three or four times, (except for tablet functionality) then when I must re-boot because of SP1 and other security updates or in one case, I installed Office 2007, it does nothing on restart; black screens and just sits there, totally unresponsive.
No blinking of the LED which shows drive activity. When re-booting, F8 isn't working (nothing happens). Regarding the previous instances, I gave up trying to get it to respond and went back to booting into XP, which always works fine. Then after a period (usually a month or more) I will try booting into Vista, on restart, and viola, it works again! WTF is going on?
Occasionally when I've been away from the computer for a short time and it goes into sleep mode (it`s set for 15 minutes), I can't bring up the display simply by hitting a key. I have to shut it down and restart. The boot button on the console will still be lit and I have to shut it down before I reboot. This probably happens about 30% of the time. The other 70% it comes back up with a key touch.
I used to have Windows XP on this PC and I have recently replaced it with a clean install of Windows Vista Ultimate 32 bit. Since then my computer will no longer reboot. When I click start > restart it will shut down like it should, then it will go to the POST screen and from there it goes black and nothing happens (where it would normally load windows). I have taken out my C: drive and put it in another PC and it worked perfectly. I have a C and D drive which are both 2 separate hard disks and always worked fine in XP. How can I fix this? They are both IDE. I have to now power off the PC and power it on again to restart.
Every now and then I have a problem where Vista displays the message "USB device not recognized" when I plug my iPhone on the USB port. It happens with all the USB ports on the machine and rebooting the computer will fix the problem.
Does anyone has a suggestion as to what may cause the problem and how to fix it? It there a service that I could try to restart instead of restarting the whole computer?
My computer freezes and reboots when I surf the web. I use Firefox, Internet Explorer just doesn't cut it for me. My Windows is fully up to date. It also happens when I use Azureus.
My laptop went to hibernate and when i pressed the power button to wake it up. The laptop seems to respnd fine, the LCD is blank(pitch black). I need to reboot my machine. Pressing power button again puts into sleep once more. I am unable to reboot my machine. Is there any other way to reboot my machine
