System Not Reboot
Jun 21, 2008
I used to have Windows XP on this PC and I have recently replaced it with a clean install of Windows Vista Ultimate 32 bit. Since then my computer will no longer reboot. When I click start > restart it will shut down like it should, then it will go to the POST screen and from there it goes black and nothing happens (where it would normally load windows). I have taken out my C: drive and put it in another PC and it worked perfectly. I have a C and D drive which are both 2 separate hard disks and always worked fine in XP. How can I fix this? They are both IDE. I have to now power off the PC and power it on again to restart.
View 4 Replies
ADVERTISEMENT
Mar 23, 2008
How many times does the update for SP1 reboot your system? When I updated my old laptop to XP SP1, it did it several times.
View 4 Replies
View Related
Mar 23, 2008
i have windows vista on my machine, i must have installed some software that has messed up my system, i keep getting the blue screen. everytime when i reset the machine, i have to press f8 then select that option: last known configuration'. this is the only way to start it, otherwise the blue screen appears.I feel that the only way to stop all this, is by doing a system reboot where my hard drive will be formatted and installs the OS from scratch.i orginally upgraded vista from XP when i have a student account with my univeristy, but then i had to pay approx ??200 for a new product key but i have not got a vista CD.
View 7 Replies
View Related
Feb 6, 2009
Vista Home Prem x64 Raid 1 config, I had a failure of some sort that caused the system to fail to reboot. I booted the system from the Vista CD and performed a repair. Now, I am prompted to choose the Operating System in the in the Boot Manager. I now have 2 files, Windows Vista Home and Windows Vista (tm) Home Premium (recovered). If I choose the NON-recovered file the machine will not boot. If I choose the (recovered) file the machine boots and operates fine. I went to System maintenance and changed the default boot system to the (recovered) file. Now, when I reboot it still goes to the Boot Manager screen and waits a while before it finally boots to the (recovered) file. I would like to repair this machine to the way it used to work and not have the machine go thru the boot manager screen. I would also like to know how the (recovered) operating system got installed in the first place. How can I remove the defective one safely and return system to normal state?
View 4 Replies
View Related
Oct 31, 2009
I have Windows Vista, and I like to make my external usb hard disk stay at D: drive even after I reboot the system.
View 5 Replies
View Related
Jun 5, 2009
i have both Vista and XP in my system with Vista in C drive and XP in D drive..i want to work in full screen mode of XP.. but in vista i cant do it...So each time i have to reboot my sytem and get into XP to do so..so if i can load already installed XP on my vista, it would be helpful...can anyone help me out..remember that i have installed XP and Vista already and i am not using any Virtual PC kind.
View 6 Replies
View Related
Nov 21, 2009
Does having multiple harddrives cause a vista system to reboot slowly? Systems specs are as followed.
View 5 Replies
View Related
Jun 10, 2009
After today's windows update I've been experiencing many blue screen, especially after the reboot. I don;t get any in safe mode so I guess it's a driver problem. This is the minidump created on my system. I have 7 of them and they all seem to be the same.
Code: ADDITIONAL_DEBUG_TEXT:
Use '!findthebuild' command to search for the target build information.
If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols.
FAULTING_MODULE: fffff80001c1b000 nt......
View 7 Replies
View Related
Jul 5, 2008
I have the following issue and hope that somebody can give me a hint about what might be going on! My system has two raid 1 arrays - one is running on XP Professional SP3 the other one is running on Vista x64 Ultimate SP1. When I start my virtual machines (either from the Virtual PC console or when double-clicking the *.vmc files) than everything is working fine on XP and the virtual machines are booting and running as expected. However, on Vista the following is happening (and I hope somebody has an idea):
1. Starting the Virtual machines from the console leads to an immediate reboot of my host machine (I can't even see any boot screen of the virtual machine - it is like clicking start in the VPC console -- > reboot of host).
Now I tried the following:.........
View 9 Replies
View Related
Apr 14, 2008
so im not a computer expert and I just got my computer a few months ago. Recently I donloaded Skype 3.6, but i never knew it wasn't for Vista, so it messed my computer up. I deleted it, but now my right click dosnt work, only my touchpad and my computer it 100x slower. Someone told me i should just reboot my computer, but no matter what i try it dosnt reboot, any idea's on how to reboot??
View 4 Replies
View Related
May 3, 2008
I have had this issue for many months, now. I loaded Vista x64 Home Premium to run in a dual-boot configuration with my XP Pro. I do critical work so I didn't trust going to Vista exclusively. I mainly wanted it to see if I could utilize all my RAM and speed up Photoshop processing. I have had it working three or four times, (except for tablet functionality) then when I must re-boot because of SP1 and other security updates or in one case, I installed Office 2007, it does nothing on restart; black screens and just sits there, totally unresponsive.
No blinking of the LED which shows drive activity. When re-booting, F8 isn't working (nothing happens). Regarding the previous instances, I gave up trying to get it to respond and went back to booting into XP, which always works fine. Then after a period (usually a month or more) I will try booting into Vista, on restart, and viola, it works again! WTF is going on?
View 8 Replies
View Related
Oct 16, 2008
Occasionally when I've been away from the computer for a short time and it goes into sleep mode (it`s set for 15 minutes), I can't bring up the display simply by hitting a key. I have to shut it down and restart. The boot button on the console will still be lit and I have to shut it down before I reboot. This probably happens about 30% of the time. The other 70% it comes back up with a key touch.
View 6 Replies
View Related
Nov 21, 2008
Some times after I reboot vista (ultimate 64bit), random folders in C drive are deleted.
I already lost 4 games and 2 apps (~40 GB).
I think it's happening only after restart and only on C drive, but it's really hard to watch all (4) drives.
View 9 Replies
View Related
Oct 7, 2009
Every now and then I have a problem where Vista displays the message "USB device not recognized" when I plug my iPhone on the USB port. It happens with all the USB ports on the machine and rebooting the computer will fix the problem.
Does anyone has a suggestion as to what may cause the problem and how to fix it?
It there a service that I could try to restart instead of restarting the whole computer?
View 9 Replies
View Related
Mar 23, 2008
My computer freezes and reboots when I surf the web. I use Firefox, Internet Explorer just doesn't cut it for me. My Windows is fully up to date. It also happens when I use Azureus.
View 9 Replies
View Related
Apr 26, 2009
My laptop went to hibernate and when i pressed the power button to wake it up. The laptop seems to respnd fine, the LCD is blank(pitch black). I need to reboot my machine. Pressing power button again puts into sleep once more. I am unable to reboot my machine. Is there any other way to reboot my machine
View 5 Replies
View Related
May 24, 2009
I have had Vista Home Edition for about half a year. About a month ago, I noticed that every time I rebooted the PC, I lost certain information. My prefered locations on Weather Underground and my site information on TV guide vanish. I have been cleaning my cookies for many months using CCleaner, but I have designated that the cookies for these two sites are not to be erased.
View 5 Replies
View Related
Jan 4, 2009
I've had some trouble with my computer and I'm not sure if it's ram problems or graphics or anything. I've had the following problems: Vertical very thin pixel lines that show up random places nvlddmkm has stopped responding and recovered. And within the last 2 days it's done it 3 times, I'm having my screen go blank with random colors. Green, White, and then the last is black that goes away and comes back like the monitor is trying to reset itself. Always black tho. I have to restart in order to get it to reboot. So I'm thinking I have bad ram, my monitor is a Westinghouse 17" Flat panel I got in 2005. My graphics card (8800GT) is about 11 months old.
View 6 Replies
View Related
Jun 8, 2007
every time i reboot i lose my desk top it goes to a plain black back ground i can put a theme on ok but when i restart my computer it goes to a black screen.
View 5 Replies
View Related
May 29, 2009
Any folder starting with the letter a or a number will be deleted upon reboot. It also empties the recycle bin on reboot but I have resigned myself to live with this idiosyncrasy.
View 7 Replies
View Related
Aug 26, 2008
I've recently bought a HP8710w and i've installed Vista Business 64bit on it. After a while for some reason the USB ports don't work when I reboot. In the Device manager section, the usb's have the yellow exclemation marks. The only way i can get them to work is to disable all and then enable them. It's quite annoying to have to disable and enable the 6 usb ports everytime i reboot. Any solution to this?
View 5 Replies
View Related
Mar 23, 2008
I'm having issues trying to upgrade from XP Pro to Vista Ultimate. Upgrade advisor says my system can handle Vista just fine. I pop-in the DVD and it says it might have some issues with the printer and some cellphones I used to connect to the PC but other than that all is well. I continue with installation, it copies files and whatnot and then it reboots (which it is supposed to do). However, the installation hangs on the Windows Vista loading bar. It just stays there forever. No error message, nothing.
I've tried it twice now and both times the exact same thing happened. The first time as an upgrade the second time as a clean install on my second hard drive. I googled my problem but found no real help. Do any of you have any clue how I can get it to install?
View 6 Replies
View Related
Dec 12, 2007
For some reason, when i start using explorer the system starts to take a long time to load anything and gets stuck on the loading cursor.. pretty soon it requires me to hard-reboot the computer. This also occurs when i am trying to install software.
View 6 Replies
View Related
Mar 21, 2008
On some websites and forums there is a remember me function where the site remembers if you want to stay logged in without you having that site open all the time or myspace.com where the remember me function can be used so you dont have to put your email address in everytime you log on. My query is on vista home premium 32bit which im using after each reboot it forgets any information you had told the pc, so on each site including here i have to type in my user name or email address every time.Is this a security issue with vista or just an error.I obviously dont want it to remember my passwords but id like not to have to type in my email address for every login screen. Finally if I leave the pc on all day I can leave and visit any site and it remembers but once a reboot is done its back to square one.
View 5 Replies
View Related
May 28, 2009
I keep having to reboot to get my sound back. This has been going on since I got the laptop 9/2008 When I called support in the beginning, of course the ans was uninstall/reinstall sound drivers then the tyipical reinstall. Maybe you all have an answer?.....
View 5 Replies
View Related
Apr 25, 2008
Every time I open outlook it goes to confifuring and half way through say an install is in progress , config runs then says I have to reboot, which I do the next time I open outlook it runs through the same proccess. What has gone wrong I upgraded to office 2007 from 2003.
View 4 Replies
View Related
Apr 30, 2008
Vista 64 killed my Corel PaintShopPro Photo X2. I installed it and then Vista did some security updates and PSP8 ; PSP9 and PSP Photo X2 no longer run. I did load and tried Photo X2 uninstalled it then PSP 9; unstalled it then PSP 8 then uninstalled it. Up to Sunday 20th it worked OK. bUt I uninstalled it formatted the hard drive and started again and it has not run since.
First time it ran when I put it in then came on the reboot in would not load after switching it off for a while then switching it on again to then hung up the PC. The only way to get Vista to run was to use the Vista installation disc and that wiped PSP off the hard drive. I have repeated this 5 times, each time with a clean formatted disc with the same results. It is an automatic microsoft update (I think it said security update).
View 4 Replies
View Related
Apr 11, 2009
I have two monitors: (HP LP3065) & (HP w1907) I am running dual configured independently with the LP3065 as my primary display. I have a Nvidia 8800 GT card. When the computer goes to sleep the LP3065 primary monitor won't wake up. When I restart my computer the LP3065 primary monitor won't wake up. When I start the computer manually everything works fine.
View 4 Replies
View Related
Apr 12, 2008
after my computer automaticlly updating and installing vista sp1, on reboot i have no mouse cursor and in device manager there is no HID section, the light on my mouse is on but thers no cursor . it just looks like vista SP1 has just removed all forms of mouse drivers
View 4 Replies
View Related
Mar 23, 2008
I installed Vista on my D partition a while back ago (C drive has XP) and now want to remove it. After following someone's instruction (reboot, and now I can not access any data on my D partition anymore. I tried run "bootsect /nt52 d:" and it returns this message: "Could not open the volume root directory:The parameter is incorrect. No bootcode was successfully updated." Anyone here got an idea how I can reaccess the data on D partition without formating it first?
View 4 Replies
View Related
Mar 23, 2008
I have is when i logon windows vista home basic on any account I get a message stateing (need to update driver for unknown devices?) This happens four more times after I cancel each window? I have tried getting said drivers without success? If I do this to all mrssages there will be the same amount of entries in the device manager? I uninstall them and apon re boot it starts all over again? understanding if this is posted in the wrong newsgroup.I am trying to learn how to find similar post for my different problems and sometimes succeed. If there is a way to find newsgroups that handle cirtain problems I would like advice in this also? I have tried the find option with some good results.
View 4 Replies
View Related
