For some reason, when i start using explorer the system starts to take a long time to load anything and gets stuck on the loading cursor.. pretty soon it requires me to hard-reboot the computer. This also occurs when i am trying to install software.
View 6 RepliesI'm having issues trying to upgrade from XP Pro to Vista Ultimate. Upgrade advisor says my system can handle Vista just fine. I pop-in the DVD and it says it might have some issues with the printer and some cellphones I used to connect to the PC but other than that all is well. I continue with installation, it copies files and whatnot and then it reboots (which it is supposed to do). However, the installation hangs on the Windows Vista loading bar. It just stays there forever. No error message, nothing.
I've tried it twice now and both times the exact same thing happened. The first time as an upgrade the second time as a clean install on my second hard drive. I googled my problem but found no real help. Do any of you have any clue how I can get it to install?
I just removed DVD drive from ASUS R1E laptop and plugged in extra battery pack and after I plugged in USB portable hard drive WD Passport Vista now requires activation. I use this system for about 1 year and I used it in exactly the same configuration before. OS says that there was a hardware change and now I need to activate OS within 3 days. The only difference from previous config is that now I have connected receiver for US wireless Microsoft keyboard and mouse and 4 port USB hub. I also changed power plan to conserve battery power and at that moment Vista shown activation message in tray. Is there a limitation how many USB devices in total can I plug in? I think I may have used about 10 - 15 different devices including USB flash memory.What can I do to revert the activation request? I don't have any other product key, but the original one that came with the laptop.
View 4 Replies View RelatedI only had to click on IE to have it run. Than, (after 1. installing latest Windows Vista upgrades, and 2. installing and viewing the latest FreshUI but not making any changes), IE would only run if I Rt clicked and selected RUN AS ADMINISTRATOR. If I only Left clicked the IE window would open, and then quickly (1-2 sec) close again.
View 3 Replies View RelatedI have a bit of weird problem. My step-brother's laptop keeps telling him his version of Vista is not genuine. And yes I'm telling the truth, it really is my step-brother with the problem, and not just me using him as a scapegoat to save my e-pride . But anyway I told him a thousand times to look for help online, but every time he just answers with something nonsensical like "No I shouldn't have to. Bill Gates should just make better hardware." And I'm just like there are so many things wrong with that statement I don't know where to start. So I decided to make the topic for him since him complaining about it nonstop won't fix it. I'll provide as much info as I can, but I'm not sure if it'll prove useful. It would be much better if he would just make a topic, so he could go into more detail but it's not like he listens to me.
View 7 Replies View Relatedevery operation requires UAC and a password (why?) under a domain. when trying to disable the uac i get: the requested operation requires elevation tried to elevate CMD but still get this message: the requested operation requires elevation. i can't login locally because i don't have the user password. any change to get this message out the way?
View 4 Replies View Relatedit may be because I got the one with all languages in it, but do they all require 9 gigs to install on the windows partition? and if they do, is there a work around? I only made my vista partition 25gigs.
View 4 Replies View RelatedTitle says it all. Vista prompts for username/password to access a shared folder on an XP machine on my network. What do I have to do to fix this now? UPnP service and SSDP service is set to auto on the XP box. The folder is shared publicly on the network, not just local. Vista seems to think that it needs authentication to access the file. How could I disable this. password protection is already disabled.
View 6 Replies View RelatedWinMail was working fine after logging off last night. Starting today e-mail does not arrive in my Inbox, cannot send mail either. When I click the Send/Receive button, a Windows Security pop-up appears and requires me to logon to my account. This has never happend before. Any info I put into the username and password do not log me on to my own mail. What gives? I have owned this machine for just over one year.
View 9 Replies View Relatedi've set my laptop to auto-connect to a wireless network, but it'll ask for identification because it's a secure network. is it possible to automate the filling process too, so that i don't have to type everytime? i have to enter my username, password and another field which i can't rem. >.< there is a check box on the prompt pop up screen which says that the above information can be saved when checked, but it's greyed out, so i couldn't check it.
View 8 Replies View RelatedAfter bootup of my system, my system gets to the normal acount login (as normal) but then tries to log into an account that doesnt exist!!! on the login screen there is an account with no picture but it requires a password! It all of a sudden appeared the other day. I have used "manage accounts" to try and delete it but it does not appear on there. the os I am using is vista home basic 32bit.
View 6 Replies View RelatedThis is regarding a desktop using Vista Home Premium and a laptop using Vista Home Premium. A shared printer is attached to the desktop. I've spent more than a few hours of researching on the internet, including the technet information for Vista file/print sharing. I have enabled file and print sharing without using a password on a private network. I have Xp machines on my home network. I am able to access them with no issues.
My issue is that when I access my Vista Home Premium desktop from the Vista Home Premium laptop (or vice versa), I have to enter a username. Any letter of the alphabet works, a password is not required. My desktop is a dual boot system. The other OS is XP Home. It does not require a username for file/print sharing................
My Norton Anti Virus 2008 requires SP2 on my XP system before I can install it. From the Microsoft site, I start to download SP2. All goes well 'till I get a message saying the installation can't be completed, and everything is being un-installed. I get no reason or error message. Fortunatly my system works after the un-install. how I can go forward with SP2. I need to get the Anti Virus definitions up-to-date.
View 5 Replies View RelatedI have the following issue and hope that somebody can give me a hint about what might be going on! My system has two raid 1 arrays - one is running on XP Professional SP3 the other one is running on Vista x64 Ultimate SP1. When I start my virtual machines (either from the Virtual PC console or when double-clicking the *.vmc files) than everything is working fine on XP and the virtual machines are booting and running as expected. However, on Vista the following is happening (and I hope somebody has an idea):
1. Starting the Virtual machines from the console leads to an immediate reboot of my host machine (I can't even see any boot screen of the virtual machine - it is like clicking start in the VPC console -- > reboot of host).
Now I tried the following:.........
I just purchased a Toshiba A205-7464 laptop before Christmas and have been having a problem lately with the wireless internet hanging on me.
I will be online for a certain period of time, sometimes hours, sometimes 10 minutes. I will try to go to a website, not always the same one, and IE will just hang, no graphics will come up, the green bar just stops halfway through and it just hangs. I get no error page or anything but in order to get it working again, I have to reboot. It is really starting to tick me off because it is starting to happen more frequently. I have uninstalled McAfee and installed my own Security Software (CA Suite).
Here are some stats on my PC:...
I have built up a new system...been running perfectly since August 2008.
2 nights ago I had just finished an update to itunes and some other apple software which required a restart. Upon restart, the system hung while booting.didn't get to the user account log-in screen.it froze with a blackscreen with the mouse cursor sitting there in the middle.
I have done the following things and observed the following behaviour:I have not added any hardware to the system Windows Update has doing automatic updates the systems boots and runs perfectly in safe mode with networking I have reverted to a couple of different restore points prior to installing the apple software...no change I have disabled all non-Microsoft software from starting up via Windows Defender...no change I can get the system to boot to where it displays the user accounts login screen. When I click on an account and enter the password it will hang at that point. Mouse continues to respond but no further response. Disk drive light goes solid but no sound of the disk operating If at the user account log in screen I select to shut the system down it will hang during shutdown checking the event logs shows a range of various fatal errors.I can provide more info on this at later posts if needed but the messages look quite similar to other posts given for a range of different behaviours so I am not sure which if any are relevant. Booting to the Vista CD and doing a repair found no errors. In short, my perfectly happy and functioning system has suddenly gone mental for no obvious reason.
I have a recurring problem in that my computer randomly will freeze and become non responsive(though I can move the mouse during these freezes). When clicking on a link or trying to view an e-mail I get the message "Not Responsive" as I watch the Windows "circle" rotate in the middle of the screen. Usually within 15 seconds to a minute the computer again returns to usable state. It used to happen only in Windows Mail. But about two weeks ago it started happening when using other programs, IE, Firefox, etc.
My system specs are as follows:
Dell Dimension E521
Vista Home Premium 32 bit
AMD Athlon 64 X2 Dual Core Processor 3800+ 2GHz
2GB Dual Channel DDR2 SDRAM at 533MHz- 2DIMMs
256MB NVIDIA Geforce 7300LE TurboCache
Integrated 7.1 Channel Audio
Optiquest 19" widescreen lcd 1280 x 768
250GB Serial ATA Hard Drive (7200RPM) w/DataBurst Cache™
Tower
Dell USB Keyboard and Dell 2-button Scroll Mouse
DSL 3.0 Mbps down 384 Kbps up
To this point I worked with Dell support to try to solve the problem. After doing a disk cleanup, removing temp files, etc. that didn't fix it, they had me perform a restore to Factory Settings. However even after doing that and reinstalling my programs and data files, the problem persists. I have tried opening Windows in safe mode and the problem doesn't occur then. BTW, there are no error messages when this occurs.
When Dreamscape is running, Vista will periodically hard hang (will not respond to any input except hardware reset).
On reboot all desktop dispay setting are trashed.
Vista is UFAPP
(Useless For Any Practical Purpose)
Good Evening / Morning / Other
I have a PC running Vista x64 specs-
MB Asus P5VD2-VM
CPU Core 2 Duo 6700
GPU BFG Nvidia 8600GTS
HD Seagate 500GB Sata
RAM 4 GB DDR2 (System only uses 3GB due to chipset lacking memory remap)
For the past year its been occasionally hanging at random - sometimes repeatedly each day, othertimes once every few days. I have run ram tests and its found nothing. Its not overheatring. The only other thing I can think of is the hard drive when I run seagates tools it cant complete the long tests but it does the short test - can anyone thing of any other diagnostics I can try.
Im running vista 64bit home premium on my acer desktop. Its been absolutly fine until today. I uninstalled a game and suddenly...well.. every time I close any application the system hangs up/stalls..the cursor goes into 'wait' mode and I can't do anything, the windows key does nothing, etc. Task manager does come up after cntrl/alt/dlt, but it wont do anything - the cursor won't even close it. If Im in a game and tab out, the same thing happens. Sometimes it happens once Ive booted. The desktop pic may be there but the desktop icons wont be...If I go to the menu screen and hit log off then suddenly things happen as they should, but the machine, naturally, logs off. Ive run a virus scan using avast, but it found nothing.
View 8 Replies View RelatedI just bought parts for a new computer, today i finished putting together, now when I try to install Vista, it hangs at the 'loading files....' screen. I've tried installing XP Pro too, and it gives me a STOP C0000221' Unknown Hard Error' after it copies all the files, and tries to start the installation.
View 7 Replies View RelatedI can start the install fine, let it run to expand files et al, and then it needs to reboot. Thats where the problem starts. My comp reboots all ok until I get the message "Press a key to boot from CD/DVD or something similar, and then it hangs. Forever!
View 7 Replies View RelatedSo this is the first issue I've really had with this. I try to uninstall the current SP1 to install the new refresh and this is what happens. All goes well until stage 3. Stage 3 gets to 74-75% and "hangs". When I say hangs... it does progress... SLOOOOOWLLLLYYY. Eventually its gets to about 85% then jumps to 100% and eventually says "uninstall has failed" and reverts changes. It's 11:30pm right now. I started the uninstall at ~6:15pm. Between it going slowly and then reverting the changes, thats how long it took. Tried this twice so far, both with the same result. I previously uninstalled a different version of the SP, no issues.
View 6 Replies View RelatedMy Vista very often hangs, usually on shutdown. I have to pull the plug. Will this damage my laptop if I keep doing it? I have to though cos its hung. Problem Reports and Solutions is useless of course it doesnt specify anything. If it wont damage the laptop then I can just keep pulling the plug when it happens.
View 6 Replies View RelatedI've been having major troubles getting my Vista 64-bit box to start up reliably.
Symptoms: During startup my Vista 64-bit machine unexpectedly "powers off" and the power button, reset button, and power switch stop working until I unplug the power cable on the back and plug it back in.
Workaround: If I boot into safe mode first, I can usually reboot back into Windows normally.
Triggers: This doesn't happen every time, although usually after Windows Update forces me to reboot it will happen. There was a power outage today and it took several reboots and unplugging the computer to get it to boot again afterwards.
Other issues: Lately when I try to put Vista to sleep, it doesn't always go into low power mode and seems to just leave everything on. Sometimes it never sleeps and goes back to the login screen immediately.
When the system dies, it usually makes this high-pitched whining noise just beforehand that I think may be the CPU - this noise happens on every boot, whether successful or not, but might be a clue about what triggers the power-off.
A friends relatively new Dell laptop running Vista Ultimate SP1 32bit. Downloaded SP2, but has hung for 3 hours at the "installing Service Pack 2 stage 3 of 3 - 92% complete. Do not turn off or unplug your Computer" stage. I had disabled all anti-virus and firewalling software.
I am told by friend that this is what happened when he first tried to install SP2, though he DID get through to 100% complete, before message popped up that installation failed and that his lappie would be rolled back to last good SP1 configuration. I have tried the wuauserv net stop bits net start bits repair.bat file that I read about elsewhere. His wife's exact same laptop (bought at same time, same configuration, same updates installed) installed SP2 no problems.
When I try to download a number of emails ore large emails, vist mail will process about 3/4 of them and then just hangs and can not down load any more.
View 4 Replies View Relatedmy computer hangs and doesn't came back even after 2 hours and it happens when i'm doing anything. it has hung twice just tring to write this question it hangs even when the computer is idle. and the only solution that works so far is to hit the reset button. if it helps here are my spec for my computer: Q6600, p35c-ds3r, gigabyte 8800gts, 4x kingston 1066MHz 1gig RAM, seagate 7200rpm 750GB hard drive. also have 3 fans keeping to cool 1 for CPU + 2 for case, none are overclocked.
View 4 Replies View RelatedHanging up again and again.
View 0 Replies View RelatedWhen installing Vista SP1 on a Sony notebook the process hangs at 56% during phase 3. I have left the machine for many hours with no indication of any progress being made (no HD Led flashes and absolutely no feedback re problem).
View 6 Replies View RelatedNew Install, updated to SP2, once boot up, I select a folder to check properity, explorer crash, next rebooted, and got to desktop and selected, my hard drive, right click, and crash again... What going on.. Why is Explorer hanging ? I ran system file checker tool, sfc.exe Nothing wrong, all is well.
View 7 Replies View Related