My Vista very often hangs, usually on shutdown. I have to pull the plug. Will this damage my laptop if I keep doing it? I have to though cos its hung. Problem Reports and Solutions is useless of course it doesnt specify anything. If it wont damage the laptop then I can just keep pulling the plug when it happens.
View 6 RepliesI have read elsewhere of some users experiencing the problem of hard disks making the infamous clicking noises on shutdown of any version of vista. I don't know if its only SATA HD but thats what I have and I am experiencing the same thing. It has me concerned that the clicking of the HD arms might be unnecessary wear and tear. any fixes for this?
View 6 Replies View RelatedI just purchased a Toshiba A205-7464 laptop before Christmas and have been having a problem lately with the wireless internet hanging on me.
I will be online for a certain period of time, sometimes hours, sometimes 10 minutes. I will try to go to a website, not always the same one, and IE will just hang, no graphics will come up, the green bar just stops halfway through and it just hangs. I get no error page or anything but in order to get it working again, I have to reboot. It is really starting to tick me off because it is starting to happen more frequently. I have uninstalled McAfee and installed my own Security Software (CA Suite).
Here are some stats on my PC:...
I have built up a new system...been running perfectly since August 2008.
2 nights ago I had just finished an update to itunes and some other apple software which required a restart. Upon restart, the system hung while booting.didn't get to the user account log-in screen.it froze with a blackscreen with the mouse cursor sitting there in the middle.
I have done the following things and observed the following behaviour:I have not added any hardware to the system Windows Update has doing automatic updates the systems boots and runs perfectly in safe mode with networking I have reverted to a couple of different restore points prior to installing the apple software...no change I have disabled all non-Microsoft software from starting up via Windows Defender...no change I can get the system to boot to where it displays the user accounts login screen. When I click on an account and enter the password it will hang at that point. Mouse continues to respond but no further response. Disk drive light goes solid but no sound of the disk operating If at the user account log in screen I select to shut the system down it will hang during shutdown checking the event logs shows a range of various fatal errors.I can provide more info on this at later posts if needed but the messages look quite similar to other posts given for a range of different behaviours so I am not sure which if any are relevant. Booting to the Vista CD and doing a repair found no errors. In short, my perfectly happy and functioning system has suddenly gone mental for no obvious reason.
I have a recurring problem in that my computer randomly will freeze and become non responsive(though I can move the mouse during these freezes). When clicking on a link or trying to view an e-mail I get the message "Not Responsive" as I watch the Windows "circle" rotate in the middle of the screen. Usually within 15 seconds to a minute the computer again returns to usable state. It used to happen only in Windows Mail. But about two weeks ago it started happening when using other programs, IE, Firefox, etc.
My system specs are as follows:
Dell Dimension E521
Vista Home Premium 32 bit
AMD Athlon 64 X2 Dual Core Processor 3800+ 2GHz
2GB Dual Channel DDR2 SDRAM at 533MHz- 2DIMMs
256MB NVIDIA Geforce 7300LE TurboCache
Integrated 7.1 Channel Audio
Optiquest 19" widescreen lcd 1280 x 768
250GB Serial ATA Hard Drive (7200RPM) w/DataBurst Cache™
Tower
Dell USB Keyboard and Dell 2-button Scroll Mouse
DSL 3.0 Mbps down 384 Kbps up
To this point I worked with Dell support to try to solve the problem. After doing a disk cleanup, removing temp files, etc. that didn't fix it, they had me perform a restore to Factory Settings. However even after doing that and reinstalling my programs and data files, the problem persists. I have tried opening Windows in safe mode and the problem doesn't occur then. BTW, there are no error messages when this occurs.
When Dreamscape is running, Vista will periodically hard hang (will not respond to any input except hardware reset).
On reboot all desktop dispay setting are trashed.
Vista is UFAPP
(Useless For Any Practical Purpose)
Good Evening / Morning / Other
I have a PC running Vista x64 specs-
MB Asus P5VD2-VM
CPU Core 2 Duo 6700
GPU BFG Nvidia 8600GTS
HD Seagate 500GB Sata
RAM 4 GB DDR2 (System only uses 3GB due to chipset lacking memory remap)
For the past year its been occasionally hanging at random - sometimes repeatedly each day, othertimes once every few days. I have run ram tests and its found nothing. Its not overheatring. The only other thing I can think of is the hard drive when I run seagates tools it cant complete the long tests but it does the short test - can anyone thing of any other diagnostics I can try.
Im running vista 64bit home premium on my acer desktop. Its been absolutly fine until today. I uninstalled a game and suddenly...well.. every time I close any application the system hangs up/stalls..the cursor goes into 'wait' mode and I can't do anything, the windows key does nothing, etc. Task manager does come up after cntrl/alt/dlt, but it wont do anything - the cursor won't even close it. If Im in a game and tab out, the same thing happens. Sometimes it happens once Ive booted. The desktop pic may be there but the desktop icons wont be...If I go to the menu screen and hit log off then suddenly things happen as they should, but the machine, naturally, logs off. Ive run a virus scan using avast, but it found nothing.
View 8 Replies View RelatedI just bought parts for a new computer, today i finished putting together, now when I try to install Vista, it hangs at the 'loading files....' screen. I've tried installing XP Pro too, and it gives me a STOP C0000221' Unknown Hard Error' after it copies all the files, and tries to start the installation.
View 7 Replies View RelatedI can start the install fine, let it run to expand files et al, and then it needs to reboot. Thats where the problem starts. My comp reboots all ok until I get the message "Press a key to boot from CD/DVD or something similar, and then it hangs. Forever!
View 7 Replies View RelatedSo this is the first issue I've really had with this. I try to uninstall the current SP1 to install the new refresh and this is what happens. All goes well until stage 3. Stage 3 gets to 74-75% and "hangs". When I say hangs... it does progress... SLOOOOOWLLLLYYY. Eventually its gets to about 85% then jumps to 100% and eventually says "uninstall has failed" and reverts changes. It's 11:30pm right now. I started the uninstall at ~6:15pm. Between it going slowly and then reverting the changes, thats how long it took. Tried this twice so far, both with the same result. I previously uninstalled a different version of the SP, no issues.
View 6 Replies View RelatedI've been having major troubles getting my Vista 64-bit box to start up reliably.
Symptoms: During startup my Vista 64-bit machine unexpectedly "powers off" and the power button, reset button, and power switch stop working until I unplug the power cable on the back and plug it back in.
Workaround: If I boot into safe mode first, I can usually reboot back into Windows normally.
Triggers: This doesn't happen every time, although usually after Windows Update forces me to reboot it will happen. There was a power outage today and it took several reboots and unplugging the computer to get it to boot again afterwards.
Other issues: Lately when I try to put Vista to sleep, it doesn't always go into low power mode and seems to just leave everything on. Sometimes it never sleeps and goes back to the login screen immediately.
When the system dies, it usually makes this high-pitched whining noise just beforehand that I think may be the CPU - this noise happens on every boot, whether successful or not, but might be a clue about what triggers the power-off.
A friends relatively new Dell laptop running Vista Ultimate SP1 32bit. Downloaded SP2, but has hung for 3 hours at the "installing Service Pack 2 stage 3 of 3 - 92% complete. Do not turn off or unplug your Computer" stage. I had disabled all anti-virus and firewalling software.
I am told by friend that this is what happened when he first tried to install SP2, though he DID get through to 100% complete, before message popped up that installation failed and that his lappie would be rolled back to last good SP1 configuration. I have tried the wuauserv net stop bits net start bits repair.bat file that I read about elsewhere. His wife's exact same laptop (bought at same time, same configuration, same updates installed) installed SP2 no problems.
When I try to download a number of emails ore large emails, vist mail will process about 3/4 of them and then just hangs and can not down load any more.
View 4 Replies View Relatedmy computer hangs and doesn't came back even after 2 hours and it happens when i'm doing anything. it has hung twice just tring to write this question it hangs even when the computer is idle. and the only solution that works so far is to hit the reset button. if it helps here are my spec for my computer: Q6600, p35c-ds3r, gigabyte 8800gts, 4x kingston 1066MHz 1gig RAM, seagate 7200rpm 750GB hard drive. also have 3 fans keeping to cool 1 for CPU + 2 for case, none are overclocked.
View 4 Replies View RelatedHanging up again and again.
View 0 Replies View RelatedYesterday after a week long holiday, I came home and started my computer which ran fine until this afternoon.
I was out and about doing things and I left the computer on and logged online as I usually do.
When I came home, I found it had shut down and restarted and I was at my Windows Logon screen.
I figured we must have had some sort of electrical outage, so I logged in and let my Intel RAID storage manger do it's thing (it has to re-verify and re-match the data on my two RAID 1 drives).
I wandered back in a few minutes later to find the computer had gone into a CheckDisc. Check Disc didn't find any bad things so I let it run through and restarted, now all seems well again.
I am curious as to why it might have shut down in the first place and not quite sure where to look.
Control Panel>Administrative Tools>Event Viewer says no critical errors, just one error message that says the shut down was unexpected.
Today i am getting windows has recovered from a shutdown, click for solution, no solutions come up,in fact nothing at all comes up, all seems normal till it happens again, usually after just being left on but not being used. attatched is the messge i get. Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 2057
Additional information about the problem:
BCCode: 1a
BCP1: 0000000000041289
BCP2: 000000018050B001
BCP3: 000000000000674D
BCP4: 000000018040B501
OS Version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:WindowsMinidumpMini031409-03.dmp
C:UsersLindaAppDataLocalTempWER-84505-0.sysdata.xml
C:UsersLindaAppDataLocalTempWER4F95.tmp.version.txt
Read our privacy statement:
Microsoft Online Crash Analysis
I have a new Dell XPS 730x running a clean install retail version of vista ultimate x64. I had 5 Disruptive Shutdowns on the first day of use and 2 on the second. Is there any way of diagnossing what is causing them? I have checked all the hardware and software with microsoft to make sure it's compatible with vista x64.
View 7 Replies View RelatedSince installing the latest Nvidia Graphics Driver 175.19, I've had a bit of an issue when I go to Restart or Shutdown my PC. After I click-on Restart or Shutdown, the Logon screen appears, then it goes back to the Desktop Screen, then back to the Login screen and Restarts or Shuts Down correctly. I'm not sure whether it may have something to do with the Task Scheduler (and Windows Sounds possibly)
View 7 Replies View RelatedI have a problem in that anytime i shutdown the computer it goes ahead shuts down. fans shut off etc but then restarts about 5 seconds later. No errors show up on the screen at all.
View 7 Replies View RelatedVista Home Premium Sometimes when I try to shut down the PC - START-SHUTDOWN and either shutdown or restart - the shutdown can take, literally, 60-75 minutes and sometimes longer. Since I usually don't have that long to wait, removing the power cord is an adequate substitute. How can I eliminate these eternal shutdowns?
View 5 Replies View Relatedi use the sleep function a lot because i like to get straight back into whatever i was doing. I was wondering if i could use hibernate instead of shutdown on my pc so i can come straight back in the morning & carry on with whatever i was doing. Is it safe to do this? And can i turn off my mains supply without affecting my hibernated pc?
View 5 Replies View RelatedI recently added a new hard drive to my system to give me a bit more storage room. All drives in the system are SATA, 2x Raptor 36GB, 1 Plextor DVD burner, and the new Samsung 250GB. The Raptors are currently not in a RAID. What occurs during Vista shutdown? It may give me some more insight into my problem.
During shutdown, the new drive gets thrashed for 3-5 minutes before the system drive updates config and shuts down. Could this be some sort of conflict with the controller? Raptors are SATA 150 and the Samsung is 300. Is Vista writing a system restore to that drive at shutdown? (A friend theorized that, and it sounded logical enough)
Brother purchased new laptop. Vista Home Basic 32 bit SP1. Turned on machine and connected fine via ethernet cable to home network. I logged in remotely and watched and acted when required as both Vista and McAfee downloaded and installed numerous updates. On one occassion when asked to restart now or later after McAfee finished updating, I chose later. I then installed LogMeIn on this computer so that upon reboot I would have more control.
That may or may have nothing to do with issue now but ever since then, when warm or cold re-start of computer is done, computer does not obtain an IP. Have to go to CPanel/Network/Diagnose and choose automatic rediscovery of IP which works just fine.
I leave my pc running to allow various programs to run during the course of the day; however, other users manage to shutdown the system without any thought for my login "at work". Does anybody know of a "Shutdown Password" facility I can use which prevents this from happening?- I know I'm still at risk from the power supply being switched off.
View 4 Replies View RelatedI am proffesional .NET developer working with C and SQL. Because of new features of the new MS products I was switching to Windows Vista Ultimate 32bit. My Vista runs on: ASUS Striker II Extreme with QuadCore 2.5 GHz. 4 GB Patriot Memory, 2 GeForce Grafikcards with 4 Monitors, 300GB Fujitsu SCSI disk.
I hade always some problems with booting and Shutdown.Somitimes I had to start the pc 4 times until it runs. Also somitimes it was not Shutingdown ... When it was up und running, all was ok, except somitimes Network does not work ... Finaly now, the system was running fine and I plugged in a webcam and it was starting to install forever ... After about 1h, I switched off the pc and now it does not boot any moren ...When I try to boot in SaveMode, it stopps at crcdisk.sys. I cannot even boot from install CD ... What should I do now ? Buy another harddisk and install a fresh copy of Vista ?? Buy another harddisk and go back to Windows XP ?? Or ist there anybody out ther who knows a solution ??? I really need to work with my pc and I would be happy for any comment on this issue !!
I have a question about Vista. I have 2 laptops. One of them has shutdown and wont boot up the login screen... but it turns on. Now that Laptop came with Home Premium... and the one I got (new) today came with Home Basic. Can I use any premium Boot Disc, and use the serial from the old laptop?
View 3 Replies View RelatedWhen installing Vista SP1 on a Sony notebook the process hangs at 56% during phase 3. I have left the machine for many hours with no indication of any progress being made (no HD Led flashes and absolutely no feedback re problem).
View 6 Replies View RelatedNew Install, updated to SP2, once boot up, I select a folder to check properity, explorer crash, next rebooted, and got to desktop and selected, my hard drive, right click, and crash again... What going on.. Why is Explorer hanging ? I ran system file checker tool, sfc.exe Nothing wrong, all is well.
View 7 Replies View RelatedWhen I click on the Windows Update button the box opens and that's it. The cursor tells me that it is working but even after an hour nothing happens. The box is empty. I haven't been able to update in a long time.
View 6 Replies View Related