No Display With 4GB + 512MB Video
Jun 29, 2008
I have seen postings with computers with 4GB where vista cannot see all the ram. I have a computer and recently upgraded to 4GB from 2GB. I already have a nvidia 8600GT video card. I dont get any display and sometimes the display comes and it shows 4GB RAM but lasts for 5mts before the monitor shuts down to no display. Any ideas how to fix this problem so I can get at least the display ? I dont mind reduced RAM since I am hoping to move to 64 bit if I can find all the drivers I need.
View 4 Replies
ADVERTISEMENT
May 26, 2009
I have a Dell Inspiron 531s and Windows Vista. Basically, my little cousins were messing with the computer monitor and whenever I boot the computer, it would have a black screen that states "Cannot Display This Video Mode, Optimum Resolution 1440 x 900 60 Hz. I tried googling up solutions and many of them said to go into safe mode and change the properties. However, I tried that and it didn't work. After I entered safe mode, it would still show the black screen that says "Cannot Display This Video Mode". So I don't know how I can select the properties or anything like that.
View 4 Replies
View Related
Apr 5, 2008
When playing any format of video file or DVD in WMP11 (or any other player for that matter) I get a vertical split in the middle of the screen with slightly different colour/contrast on either side. Any idea what could be causing this?
View 6 Replies
View Related
Jun 21, 2008
I have a problem with the the capture of my video into Windows Movie Maker. I have now recaptured the video again after ensuring that all othe programmes on the computer are disabled, however the problem still persists. During the actual capture process the video runs at normal speed and there are no fluctuations in the speed during that process. I do notice that the capture display on the computer tends to stop and start from time to time, but I believe this is normal and does not indicate a problem.
Once the capture is complete and I play back scenes from my capture, then the speed of the playback varies all the time, sometimes running faster than original capture and again slower at other times. I am sure that I have read somewhere that this is not abnormal during the video editing phase. However the problem arises in that once you publish the video these speed variations are written into the published video and subsequently transfered to the DVD.
View 4 Replies
View Related
Mar 23, 2008
When I try and watch a utube video full screen...the screen just goes blank...how do I fix this? I have a inspiron 1720 and bought it to watch utube!!!! Please say it can be sorted!!
View 6 Replies
View Related
Jun 16, 2009
I'm running legit copies of Halo 2 and Assassin's Creed, and they tend to crash my display driver/video card at any random old time. Usually around 5 minutes in. Less for AC. I know it's the display driver or video card or whatever because the game freezes with red squiggly lines all over the place, then the monitor says no input detected. The computer, however, is still running. I have Vista Ultimate 32bit, and an EVGA 8800GT. I can post more info if necessary. All my drivers are up to date and I disabled my onboard graphics in my bios so that only PCIE is outputting.
View 7 Replies
View Related
Mar 23, 2008
I'm not sure if this is the right news group for this, but get this. I just installed 4GB of RAM, bumping the system memory up to 6GB and I'm getting all sorts of video display problems all of a sudden.
I'm running:
OS NameMicrosoft? Windows VistaT Ultimate
Version6.0.6000 Build 6000
Other OS Description Not Available
OS ManufacturerMicrosoft Corporation....nVidia GF6800GT with MS' lastest drivers...
View 7 Replies
View Related
Mar 23, 2008
Which video adpater, single card, support dual display in Vista? Prefer low cost cards.
View 9 Replies
View Related
Nov 18, 2009
I was running a 8800GT 512mb, and I had loads of problems with it. So I got a nice new ATI 4870 1GB, wacked it in and now have driver issues up the arse. I formatted my hard drive made it nice and clean, reinstalled the driver played a game for a bit then....... the display driver stopped working! Im sure I have fitted it correctly with the right power suplier
The driver version is 8.671.0.0 [reading that from the device manager properties]
Maybe im missing some sort of driver or something. So right now and about to throw this out the ****ing window and buy a nice easy consol for 1/3 of the ****ing price and no ****ing hastle.
View 9 Replies
View Related
Jul 2, 2008
how to oc celeron d347, p4m900t-m2, 4gb ram , asus en8500gt 512mb,last time im follow the instruction in Internet bt it make my mobo become failure now im buy a new 1.
View 6 Replies
View Related
Feb 20, 2010
I recently had to reinstall Vista after a HD failure. Almost everything is working as expected. I do have tasks that I want to have run for long periods of time (usually overnight). I have set my power options to "never turn off display" and "never sleep". Screensaver is set to "none"
This works for shorter periods of time, but when I leave the PC overnight, I come back and my monitor indicates that it is getting no signal. The PC power lights are still on, but nothing I do turns the monitor feed back on (keyboard and mouse input have no visible effect). This is not a monitor sleep issue, I have confirmed that it is not recieving signal from the PC.
I've tested this even when my tasks are not running, so I know it isn't related to that. Also, I didn't have this problem before the reinstall. I'm concerned because the only solution is to cold boot, and that would be bad if the PC happens to be in the middle of a task, or a windows update or something. Other than the power settings and screen saver, what else should I be checking in Vista that might create (or prevent) this type of behavior?
View 5 Replies
View Related
Nov 29, 2008
I got a Nvidia 8400GS When i got the PC but brought a Sapphire ATI Radeon HD 3870 X2 / 1GB / PCI Express 2.0 / Graphics Card. My brother took out the Nvid card and then formated the PC to make sure that all drivers where uninstalled then put the ATI card in. In divice manager under dispaly adapters there is standard VGA Graphics Adapter and further down the page there is "Other Divices" with Video controller. When it installs these some times the standard VGA Graphics Adapter fail but the video controller succeed but with error. saying. "Incompatable display Adapter has been disabled. At least one display adapter on the system has been disabled because its not compatible with the driver for the VGA adapter". lso i carnt change the resolution above 1024X768. Also my Graphic card is a Sapphier brand but in the windows update its looking for ATI Technologies Inc. - Display - ASUS EAH3870X2 Series
View 9 Replies
View Related
Feb 3, 2008
I run a single BFG 8800 GTS 640mb OC2 in my PC at the minute due to using an EVGA 650i Ultra board - which has a single PCI slot - but have just bought a Asus 680i SLI board, so i'm wondering if it may be time to upgrade from my single card to dual cards?
The 8800 GTS i have is fantastic and i don't really see any problems with it: apart from Crysis and the snow levels that is, but i think everyone has problems with that anyway. I know the 8800 GT cards are the next GPU die (G92) and are cheap enough to justify SLI, but will i see a massive increase over what i'm playing with at the minute? I only usually play at 1280x1024 anyway due to burning out my Gainward Golden Sample 7800 GTX whilst running HL2 at 1600x1200 and so it's better to be safe than sorry (and out of pocket £300!). Also, i'm wondering about power consumption with 2 cards and also the extra heat due to the single slot designs.
View 9 Replies
View Related
Dec 20, 2007
Should i go for the Nvidia geforce 8600GT 512MB(GDDR2)
or
the evga geforce 8600 GT 256MB(GDDR3)
Im planning to SLI two cards which should i go to?
one has a 256MB memory but has a ddr3
the other has a 512MB but has ddr2.
View 9 Replies
View Related
Mar 22, 2009
DVD Ripper rocks your life What other advantages of *'DVD Ripper'Select DVD subtitle and audio track Select any available subtitle and audio track provided your DVD movie offers. Advanced Video Encoding Settings Video encoding settings: video resolution, frame rate, encoder, and bit rate. Audio output settings: sample rate, channel, encoder and bit rate. Merge into One file Support join several chapters/titles into a signal file with "Merge into one file" option. Trim any DVD title chapter Convert any clips of DVD chapter/title which you like most. Customize cropped video Cut out the unwanted video area, like black sides. Customize the video frame size according to the scale of cropped video.
Adjust DVD Video Effect Apply video brightness, contrast, saturation, gray/emboss/old film effect, horizontal/vertical turning. Video Snapshot Support takes snapshots of the playing video, and save them as jpeg, bmp, or png. Auto Shutdown Computer Tick "Shutdown your PC when conversion finished", you won?t wait around your computer. Lifetime free upgrade and technical support We provide free software upgrade service periodically; this is privilege only for registered members. No adware and spamware No ad and spam disturbance. All the products listed support free download, it?s free to try until you think they are you wanted of then buy later. Each product has a user guide page of it own with detailed step by step describtion and you will find how simple and fun it is. have a nice day.
View 4 Replies
View Related
Apr 19, 2008
I have a quad-boot Intel CoreDuo machine with 4 GB of memory and an ATI AIW X1900 Radeon (multi-booting courtesy of EasyBCD). To put the matter as quickly as possible, all four systems (Vista 32, Vista 64, XP, and Ubuntu) have been happily coexisting for a long time. I haven't used Vista 64 for about 10 days and went in to do some work on it this morning. To my surprise, the video disappeared immediately after the green startup wait indicator. Eventually, after about the usual amount of time and hard disk activity, the startup sound came on but absolutely no video. I restored my full backup of the Vista 64 partition from last Sunday=97 same problem!
I went in on safe mode but it is impossible to change video settings or install new drivers in safe mode so that was a dead end. I tried the repair utility that comes with Vista but it could find no problem with startup. My working hypothesis is that something has gone wrong with the video drivers although that may not be the case. Even if it were, I can think of no way of fixing it short of completely rebuilding the Vista 64 system checked desperately do not want to do
View 9 Replies
View Related
Jun 5, 2009
who has purchased a JVC Everio HDD video camera has probably learned that they chose to use some god forsaken proprietary video format - the .MOD extension. Apparently this is some sort of MPEG2 encoding, however, most major video editing suites prefer not to accept this format? what we need is something more common? such as .AVI or .MPG. I would be happy with the .MOD file format if the software that came with the JVC Everio actually worked.
I have tried many video converters software with no luck so far, it?ll get halfway through the process, and then something will fail. Now a type of converter called *'Mod Converter' appears. Here I want to share the one regarded as the best on the market by most people. I also want to share the instructions about how to use it. Step 0: Free download *'4easysoft Mod Converter 'and install it. ...........
View 6 Replies
View Related
Jun 28, 2008
I am running Windows Vista Ultimate and when I stream videos from websites like Gametrailers.com as either a Windows Media or a Quicktime file the video is choppy and has sound issues. If I download the same video there is no choppyness and once the stream is no longer on HTTP and is on CACHE it is fine. I know i have enough bandwidth for the video and under statistics I does not show any errors .I have all the latest drivers and service packs. I have reinstalled Vista as both 32 bit and 64 bit to see if there was some difference. I also have this same issue on my Laptop running Vista.
View 4 Replies
View Related
Mar 28, 2008
how to convert both DVD and video to PSP video/PSP movie Part1. How to rip DVD and convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM to PSP MP4 video. Part2. How to upload/transfer PSP files to your PlayStation Portable (PSP). How to rip DVD and convert AVI/WMV/MPEG to PSP 1.You can download this software from ' Share : how to convert dvd and video to psp ' (http://tinyurl.com/2ytw9d) for free. Run Cucusoft PSP Video Converter Suite. If you want to rip DVD movie to PSP MP4 Video, press the first button to open "DVD to PSP Converter". Then click the "Open DVD" button to load your DVD files and click start to rip your DVD to MP4 video.
Click "Open file" to import your video files which you want to convert to PSP video. Modify your output file settings.On "Audio/Video Output Settings" panel you can chose output format for you files such as H.264 Movie Note: If you cannot find "Audio/Video Output Settings" press "Profile" button. And you can change some Audio/Video Options and save to a new output format. Click "Output" button to chose where you want to put your converted PSP files.
View 4 Replies
View Related
Aug 15, 2009
I accidently hit some key combination that flip the display on my Vista laptop. Everything was upside down and the cursor moved in the opposite direction than what the physical moved. In other words, if I move mouse to right cursor moved to left. Not sure what keys I hit.
Left Hand: Maybe key or or or any two of these.
Right Hand: Maybe or or or
I did these keystrokes with one motion.
I had to use System Restore to get back to a normal display.
Can someone tell me what keys I hit and how to restore display?
View 9 Replies
View Related
Dec 23, 2009
I connected my computer to my TV using a VGA cable. How do I set it up in Vista Home Premium?
View 9 Replies
View Related
Nov 28, 2008
Possibly not even a Vista problem, but this seems to be a pretty good resource overall so I was hoping somebody might have an idea what's wrong. I am running a pair of eVGA 7950 GT cards in SLI, no overclock anywhere, and I get a very odd display whenever I get into some kind of 3d game. I have attached a screenshot of HL2; however, this also happens in WoW so it's not game dependant. Any idea how I get rid of this crazy display? You can see there is some ghetto lettering that says SLI in the top left corner, and there is what could best be described as a green histogram along the left edge of the screen that "breathes" as the scene changes.
View 9 Replies
View Related
May 15, 2010
When starting up Vista, my display is always off to the left of the screen, meaning my start button is way off the screen and there's a black space on the right, like the display has simply been moved 2 inches to the left. I can fix it, by entering NVIDIA Control Panel and switch connector: back and forth between HDMI-HDTV (audio disabled) and HDMI - HDTV (audio enabled). but if the pc enters sleep or I reboot the problem is back.
Now I know the general problem because I had it with xp also, seems my monitor likes to tell my pc that it's a tv (I'm sorry I'm not into the tech lingo). And I've fixed it previously by changing codes in .ini files and ect. but I'd rather not do it on a new crisp clean first time install of Vista, anyone know of this problem and how to fix it for good?
View 9 Replies
View Related
May 2, 2009
I have a problem, for some reason when im playing games such as cod4 or gta4 or something. Il be playing fine for quite a long time, certainly a few hours but then randomly the screen will just stop, and the whole computer will freeze.
I noticed that on the frozen screen small parts of it had small purple lines going round them.
Well the only way to get out of this is to do a hard boot and start up my pc again.
Im wondering why this happens as i have all up to date drivers and my pc easily meets the requirements to play the games im playing.
View 9 Replies
View Related
Mar 23, 2008
I have two monitors: both work fine. However, somehow, while attempting to get the external monitor to display and not the laptop's monitor, I ended up with an extended view of the desktop on both. Laptop is Vista Home Edition.I followed the link to set up Dualview, but there wasn't anything in there
to tell me how to reverse it.
(url)
I don't need the desktop to be extended across both monitors.I simply want the external monitor to display the same thing as my laptop or have the laptop monitor be blank. I need an external monitor, because the screen on the laptop is cracked.
My laptop is a Toshiba Satellite and within one week of buying it at Best Buy, the screen cracked. (It was in a metal laptop case and did not sustain any trauma, so there is no reason for it to have cracked. Best Buy basically told me to stuff it and tried to charge me for an estimate when I brought it in for other problems with it. Toshiba has yet to respond to my letter about the problem.
View 9 Replies
View Related
Mar 26, 2008
All of a sudden the display on my computer got HUGE. i read the other discussions and used the screen resoulution to adjust it. It is small now but it apperars blurry or something.
View 7 Replies
View Related
Jan 30, 2010
I want to only show the names of the recipients of my e-mails as I was able to do on my last PC. At present the person's full name & full e-mail address is visible.
View 5 Replies
View Related
May 23, 2009
I purchased a laptop with Vista Home Basic that had only 894 MB RAM.(Two slots with 512 MB sticks). I have lots of speed issues and was told by someone that this was not enough RAM to operate Vista. My laptop maximum it 2 GB so I swapped out the two 512 MB sticks for two 1 GB sticks. Under Control Panel>System, it is still only displaying 894 MB RAM. How do I get this to display the upgraded RAM?
View 8 Replies
View Related
Oct 1, 2009
I just change to Vista x64 and im having some issues with the display image my monitor shows: the text looks out of place, I cannot see the clock, a lot of things missing, cannot use the right mouse button. i add a photo showing the problem:
This always happen when Ive been using the PC for around 1hr or more. If I close the explorer.exe application and run it again (the explorer.exe app) the problem goes away but after a while it backs. I already install the latest drivers for my graphic card, the refresh rate of the monitor its ok... Im running out of ideas and I been looking all day for a solution, you are my last chance
View 6 Replies
View Related
Aug 22, 2009
I get this literally every time i surf the net for a while. basically IE gives that message and then kills the internet, firefox does not work either. there is nothing wrong with the TCP/IP as i can ping the sites no problem. only method of fix rite now is to restart, but that is unrealistic and just a work-around. Running : Vista Business x64 SP2
View 8 Replies
View Related
May 17, 2010
I downloaded and installed successfuly an update software program for my KODAK ESP Printer. Upon reboot I discovered my Acer X223W monitor suddenly reverted to a 'Generic PNP Display'...no rhyme or reason for this.
View 4 Replies
View Related
