The Standard VGA Graphics Adapter Fail But The Video Controller Succeed But With Error "Incompatable Display Adapter Has Been Disabled"

Nov 29, 2008

I got a Nvidia 8400GS When i got the PC but brought a Sapphire ATI Radeon HD 3870 X2 / 1GB / PCI Express 2.0 / Graphics Card. My brother took out the Nvid card and then formated the PC to make sure that all drivers where uninstalled then put the ATI card in. In divice manager under dispaly adapters there is standard VGA Graphics Adapter and further down the page there is "Other Divices" with Video controller. When it installs these some times the standard VGA Graphics Adapter fail but the video controller succeed but with error. saying. "Incompatable display Adapter has been disabled. At least one display adapter on the system has been disabled because its not compatible with the driver for the VGA adapter". lso i carnt change the resolution above 1024X768. Also my Graphic card is a Sapphier brand but in the windows update its looking for ATI Technologies Inc. - Display - ASUS EAH3870X2 Series

ADVERTISEMENT

Standard Vga Graphics Adapter Not Detected

Oct 14, 2008

My Standard Vga Graphics Adapter is not detected on my laptop how can i change it?

View 4 Replies View Related

Incompatible Display Adapter Has Been Disabled

Dec 30, 2007

Setup: New Vista PC (bargain-rack special - a bare-bones office machine with Vista Home Basic) has a built-in VGA adapter. I want to do the two-monitor setup, so I plugged in my ATI video card as the second video driver. Problem: When I boot the machine, I get the following error: Incompatible display adapter has been disabled. At least one display adapter on the system has been disabled because its driver is not compatible with the driver for the VGA adapter.

What I find odd, though perhaps it is not odd to you, is that the internal driver was the one disabled - the ATI card is now defaulted as the main (and only enabled) driver. In Control Panel, it does not say that the drivers or controllers are disabled, but instead that there are problems. Clicking on Troubleshoot does nothing at all.

View 9 Replies View Related

Which Video Adapter Supports Dual Display In Vista?

Mar 23, 2008

Which video adpater, single card, support dual display in Vista? Prefer low cost cards.

View 9 Replies View Related

Standard VGA Graphic Adapter

Jan 30, 2009

I have a Dell Studio 1537 and i have completley reinstalled windows vista and after the screen was a bit stretched. I turned the resolution to the highest and made sure the colours option was at 32bit. This helped and shrunk the screen a bit but now it is still a little bit stretched and the image is not as sharp as it used to be. How can i get it back to its origional format?

View 9 Replies View Related

PS2 Controller Adapter: Vista Ultimate X64 It Doesn’t Recognize It

Mar 25, 2008

I used to use my SUPER BOX4 (Ps2 controller to PC adapter) for when I had XP and it worked like a charm. Now with installing Vista Ultimate X64 it doesn’t recognize it.
Is there a compatible driver for it (which I doubt) or is there an alternative adapter?

View 9 Replies View Related

Cant Update Microsoft Windows Standard VGA Adapter Version

May 14, 2010

im having a problem on my Vista...my display adapters on DEvice manager has a (!) sign...i cant update my Microsoft Windows Standard VGA Adapter version 6.0.6000.16383 6/21/2006. please teach me were can i download the driver...i hope someone teach me to resolve this.

View 6 Replies View Related

Linksys Wireless G USB Adapter: Lose Internet And USB Adapter Itself

Feb 9, 2009

I have a issue with my Linksys wireless USB adapter. I am trying to use it with Vista Home Premium. After installing software... I plug the adapter in (like directions say) and windows update goes to work. It updates the driver, installs correctly, I then connect to my home network and all is good. My prob is for some reason I lose internet and the USB adapter itself. One time I switched users and lost all. I have tried uninstalling adapter and tried reinstalling by pointing to my D drive (install CD) in hopes of using the driver that's on the installation CD. as soon as it saw everything.. windows update once again gave me the same buggy driver. I have tried to install with UAC disabled... no luck... the Linksys website/support for drivers has the same updated driver. I tried to use an older one but Windows keeps forcing this updated one down my
throat.

View 6 Replies View Related

Disabled Network Adapter And Freeze Up

May 10, 2008

My computer will load up normally the way until it reaches the screen with the green bar and black screen. The green bar will cycle through about two to three times, but then it stops moving. It moves forward just a little bit every 5 minutes though, so if I leave it like that for about 40 minutes then Vista will be able to boot to my desktop. And when I try to restart my computer, it just stays at the 'Shutting Down" screen forever. The longest I've let the shutting down screen just stay there was 20 minutes. I had to cut the power. Anything that has to do with networking seems to make my computer freeze up. I can start up in Safe Mode but not Safe Mode with Networking. And when I waited the 40 minutes start my comp up, the Vista said the the "Network cable is unplugged", but it wasn't.

When I disabled the network adapter, my computer froze again.My computer will load up normally the way until it reaches the screen with the green bar and black screen. The green bar will cycle through about two to three times, but then it stops moving. It moves forward just a little bit every 5 minutes though, so if I leave it like that for about 40 minutes then Vista will be able to boot to my desktop. And when I try to restart my computer, it just stays at the 'Shutting Down" screen forever. The longest I've let the shutting down screen just stay there was 20 minutes. I had to cut the power. Anything that has to do with networking seems to make my computer freeze up. I can start up in Safe Mode but not Safe Mode with Networking. And when I waited the 40 minutes start my comp up, the Vista said the the "Network cable is unplugged", but it wasn't. When I disabled the network adapter, my computer froze again.

View 5 Replies View Related

Display Adapter Not Showing In Device Manager

Mar 23, 2009

I just bought an EVGA nForce 730i mobo with onboard GeForce 9300 graphics card. I installed vista ultimate 32 bit and the first thing I did was install all the drivers from the disk that came with the motherboard. For some reason I can't find my display adapter in my device manager list and I don't think the driver from the mobo disk is installing properly but I can't check that because I don't see the adapter in the device manager list. Any idea on how I can fix this?

View 4 Replies View Related

Added A Second Monitor To The GeForce 7100 GS Using A DVI-VGA Adapter And For The Life Of Me Cannot Get It To Display Anything, The Monitor Is Just In Sleep Mode

Apr 23, 2010

I added a second monitor to the GeForce 7100 GS using a DVI-VGA adapter and for the life of me cannot get it to display anything, the monitor is just in sleep mode. I've got the latest driver, Windows is up to date, checked the cables, tried another adapter, tried everything but, still nothing. The second monitor shows up in the device manager and in the Nvidia control panel. It's enabled and set to extend desktops. It seems the system knows it's there because I can move the mouse over, but cannot see anything. The power light on the second monitor just flashes. I've swapped monitors over, to make sure there's not a problem with the display and it's fine. When I do that, the main monitor is then plugged in to the DVI adapter and then that one goes to sleep. Just seems whichever monitor is plugged in to the DVI-VGA adapter just doesn't want to work........

View 9 Replies View Related

Standard IDE/ESDI Hard Disk Controller

Mar 26, 2008

After the Compatibility Test the setup says that i need to update the drivers for "Standard IDE/ESDI Hard Disk Controller" so i went to the net and downloaded the latest chipset drivers for my Intel 946GZ and ran the setup again but still the same error comes... any advice??? (i already ran Windows Vista Upgrade Advisor a couple of times and no issues where found and said that Vista Business was the best match for my PC)

View 5 Replies View Related

Network Adapter

Jul 8, 2009

window vista home premium 32 bitand not long ago i had connected a wireless router to it.
shortly after my network sharing did not work any more there was a ! on the on the network adapter symbol. code error 31

i uninstalled it and wanted to reinstalle it but i did not copy down which one it was,
i did researse on my computer and foud four intel (R)/pro wireless 2200BG nectwok connection and others .

my question is which was the one a deleted or which is the one i need to reinstall to be compatible with my pc.

View 9 Replies View Related

Sidewinder Usb Adapter

Apr 24, 2008

A friend of in got his in the mail to day and were trying to get the 98 sidewinder to work on xp withe usb adapter since there is one made is there away to get the controller to work with it?

View 8 Replies View Related

Recommended 802.11g USB Adapter For X64?

Sep 20, 2007

I have Vista Ultimate x64 installed on a dual core Pentium D 820, 3Gb ram machine. I also have a "bluenext" USB 2.0 wifi adapter, which is actually based on the ZD1211B chipset, recently renamed the Atheros AR5007UG. Running WPA-PSK

- all drivers since 2.0.0.125 result in very slow performance (~ 30 kbps)
- virtually every day the adapter stops working. Usually the LED is off & no error is logged, but device needs to be replugged to reactivate. Occasionally a reboot is needed.................

View 6 Replies View Related

Standard VGA Graphics Adapters:Bad Graphics

Jan 1, 2009

When i upgraded my windows xp to vista about 5 days ago it somehow screwed up my computer. My graphics are so bad that i can't play simple games and i know that my graphics card used to work perfectly. I just need to know if it is vista that has changed my graphics card and if it did how can i fix it. Also for Hardware Acceleration, i can not turn it on because i do not have the troubleshoot option in my display settings. My nero will not burn any dvd disc's due to that.

View 6 Replies View Related

Wireless Adapter Keeps Disconnecting

Mar 23, 2008

I recenctly bought a new machine that has Vista Basic installed on it. I installed the latest drivers for my Netgear wireless adapter which are supposed to be Vista compatible. However, although I can get connected, I often have to mess around with the networking settings first and then the connection will only last around 15 minutes before the adapters led stops flashing. I then have to reboot to get a connection again. I tried the adapter back n my old XP machine and it is fine. As soon as the XP machine boots, the led indicator starts flashing and it doesn't stop until you shut down. With the Vista machine, the adapter often doesn't start flashing until you actually connect and then it will just stop after a short while. I've been messing around with this for weeks now and got nowhere. I would have suspected the adapter drivers, but it seems as though there are a lot of other people with the same problem on different adapters.

View 9 Replies View Related

Recommendations Of Wireless Adapter

Jan 25, 2007

I have a WG111v2 which I bought just to be able to use Vista x64. It doesn't work well with games though, so I need an adapter with no dropouts and x64 support. Would be nice with some recommendations.

View 9 Replies View Related

Network Adapters And 6 To 4 Adapter

Mar 23, 2008

I am still trying to get some help for this. In Device Manager, under Network Adapters I get a list of 20 approx items all with yellow triangle warnings (apart from 2). The first ones are Microsoft 6to4 Adapters. Info says drivers are up to date,but I get an error code 31. Details: Message "This device is not working properly because windows cannot load the drivers required for this device" (Code 31). Have checked for solutions, but says there are none. I get similar warnings for the other 20 items shown. What do I do now please? (I am using an Acer laptop, with Vista Ultimate OS)

View 5 Replies View Related

Wireless Will Not Work With Any Adapter

Jul 2, 2008

I have a compaq presario desktop that I am trying to connect to a dlink wireless system. I have tried trendnet, linksys, and now Dlink usb wireless adapters but none will connect. They show up in the device manager as fine and dandy but will not enable. I am now trying the dlink WUA 1340 and downloaded the drivers from the dlink website.

I have also did a netsh wlan show settings and it says the autoconfig is disabled. Not sure if it should be enabled and have yet to find out how to enable it on this desktop. I have already tried the to do set autoconfig enabled=yes interface="?" as per technet instructions but just says wlansvc is not running. I am very frustrated and have had to drag the dlink router and dsl to telus to my computer so I can hook up by ethernet.

I have ran the gammut on this as I have even went through all the usb plugs and all are working and detect the wireless device. I have removed everything a few times and reinstalled without the dlink software etc. etc. etc.

View 8 Replies View Related

Resetting Network Adapter

Jun 21, 2008

It seems many people have problems with Internet connections in Vista. I am one of them and have gone through all the discussions looking for a solution - nothing so far!! What seems to work is a script that automatically resets the adapter on
start up

View 5 Replies View Related

Wireless Adapter Not Enable

Apr 9, 2009

I went to a wired connection instead of wireless, and then decided to go back to wired. Since my wireless connection is through a linksys WUSB600N and it has known problems with skipping when playing games like World of Warcraft I turned off WLAN and had disabled my wireless adapter, then installed another program to run the connection (Which I had done previously though the last time I didn't turn off WLAN or disable my adapter). Then I went to enable the adapater and it wouldn't enable. I also turned back on WLAN and restarted. It still won't work. At this point nothing I do will enable my wireless adapater. It shows it is enabling but then it just keeps saying disabled. The light on the WUSB600N doesn't even turn on when I plug it in now, and it just worked less then 24 hours ago.

View 6 Replies View Related

Wireless USB Adapter Not Working

Oct 18, 2007

I've recently installed Vista Business on a new Dell PC. I've had problems installing the wireless adapter but in the end, Vista itself installed drivers for it though now the utility provided with the adapter doesn't work at all. The connection works fine until you try and download large files/use more bandwidth. For example; using a download manager like Flashget to download several files. From then it dwindles straight to 0kbps and then the whole connection dies, disconnects and the router is no longer available, according to Vista and yet the router is running fine with other computers on the network going strong. I've tried installing, updating, reinstalling drivers, altering the power settings and other internet settings to no avail.

View 4 Replies View Related

PC Won't Boot After Installing PCI Wireless Adapter

Mar 16, 2009

I am new to Vista and my o/s is telling me I have Vista Home Premium (64 bit Operating System).

My PC is a Packard Bell iPower X9810. Motherboard is MS-7380

I wanted to insert a wireless PCI adapter into one of the vacant slots in my machine.

I purchased an Edimax wireless 802.11n 32 bit PCI adapter (model = EW-7728in).

I thought, after reading countless reviews this was going to be easy

So I popped it in and switched my machine back on (holding my breath). I saw the initial Packard Bell splash screen then was presented with a black empty screen with a flashing cursor in the top left hand corner

At this point I was rather concerned because I could hear my machine making a whiring noise (it didn't sound good).

After administering some smelling salts I proceeded to re-start crossing my fingers and it happened again. On the 3rd attempt I eventually got a sort of recovery screen that gave me one of two options 1) attempt a repair or 2) continue trying to load windows. I selected the first option and again held my breath.

After roughly 10 mins it had performed a system restore and I had turned back the clock to a previously known good state.

For the life of me I cannot understand why this happened. The manual that came with the card said to pop the adapter in the slot > boot up > run CD-ROM and hey presto but that did not happen.

When I looked at the mobo inside the machine the 2 PCI slots are ever so slightly offset and don't align tru with the covers you ping off the back of the tower. However, I must advise that the adapter went in without much of a struggle but must of " slightly " been on the wonk as I have already said the slots are not 100% in line with were the aerials stick out the back.

I'm scared to death now of breaking my machine and don't know what to do? The Edimax website says this is compatible with my 64 bit Vista so what gives?

View 9 Replies View Related

Stop :0x000000ED , Bluetooth Adapter

Jan 12, 2010

just before the bsod problems my bluetooth adapter was working up and i got messages to reinstall the drivers fer it.(didnt pay much heed to it)i thnk i had a few viruses on my system i used avira and cleaned them up.(only the c i also let windows update download updates (around 450 mb) (in the meantime i went out fer a smoke) it installed them then prompted me to reboot. i rebooted it when i got back and since then iv had this error message.(BSOD)

a problem has been detected ..blah blah..windows shut down to prevent damage to your system.. .

UNMOUNTABLE_BOOT_VOLUME

stop :0x000000ED (0x85B33808,0X80000003,0X00000000,0X00000000).........

View 9 Replies View Related

Edimax 7728in Wireless Adapter

Apr 8, 2010

This product is on the market and has not got a decent driver for Vista or 7. Edimax need their buts kicked for selling a product that is useless.

View 0 Replies View Related

Automatically Get New IP Settings For The Network Adapter

Mar 23, 2008

Everytime I reboot the laptop I loose the ability to connect to the internet although the laptop confirms a connection to the wireless network router.I click "Diagnose this connection" and choose "Automatically get new IP Settings for the network adapter" I have internet connectivity restored.

The laptop is an HP dv6755ca, less then one week old, and has been checked to be sure all drivers and updates have been installed. I have run anti-virus and checked for malware/spyware. The network setup is 1. PC connected via ethernet, 1. wireless laptop and 1. smc8014w-g wireless gateway.

Although the setup was walked through with me by the technician (over the phone) I'm not yet ruling out a faulty set-up in the 192.168.0.1 site [except that I have had no issues with the wired connection].

View 9 Replies View Related

Reset Network Adapter After Wake Up

Oct 7, 2009

I have several notebooks with Windows Vista Business 32 installed. After wakeup from sleeping mode, is necessary to reset network adapter to get to the internet. Otherwise only local network is reachable. I disabled power off of network adapter during sleep mode, Disabled IP6. I tried to install KB933872 but installation end because KB is not for my operating system.

View 7 Replies View Related

Realtek Network Adapter Update

Jul 28, 2009

Is there a way to delete "failed install of updates" I have the most updated version of the driver. it installed a few times B4; now it won't, error code states already installed or not compatible

View 5 Replies View Related

ISATAP Adapter 3 With Yellow Indication

Sep 25, 2009

I found this today in my device manager. ISATAP adapter 3 with yellow indicating problem.

View 5 Replies View Related

Wireless Network Adapter Installed

May 14, 2010

So I turned my laptop on today and for some reason it would not connect to the internet. I thought it might be the router so I rebooted that and still no luck. When troubleshooting it says; "This computer does not have a wireless network adapter installed and configured" So immediately I think the driver or my adapter has been uninstalled. If your wondering what my adapter was its; Nvidia nForce Networking Controller (x64 Windows Ultimate) I went on there website and found the driver, installed it and still nothing. I also found another program that was installed; Broadcom 802.11 Uninstaller I really need this fixed ,

View 5 Replies View Related

SCSI U320 Adapter Has 64 Support?

Jan 26, 2008

I have an LSI U320 but there are no drivers for Vista of any flavor.

View 6 Replies View Related

Conflicting IP Addresses For Single Adapter

Mar 23, 2008

After installing Windows Vista I get a single network adapter assigned two IP addresses which causes a conflict everytime I start up. I disable and enable the adapter and the problem goes away. Then I can connect to the internet.

View 4 Replies View Related

How Do Enable DHCP Network Adapter

Mar 23, 2008

When I check the status of my network adapter, it says that DHCP is not enabled. How do I enable it in Windows Vista Ultimate? I'm trying to enable it for ICS to/with a windows XP Pro computer. The other computer (XP) is not auto configuring itself with the right type of network settings. (IP, Subnet mask, & Gateway) For instance: it will configure itself to use 169.254.37.72, 255.255.0.0 instead of 192.168.0.(2-255), 255.255.255.0, and Default Gateway of 192.168.0.1.

View 4 Replies View Related

Automatically Get New TCP/IP Settings On Wifi Adapter?

Mar 23, 2008

How do I force Vista to do what it should be doing anyway, i.e. get new TCP/IP settings when it connects to a new access point (with different SSID, WEP key, channel no) Vista (HP) certainly does not do it automatically... ipconfig /all shows IP address of previous access point... and previous gateway/DNS. "Repair" usually resolves the issue but it shouldn't be necessary. DHCP client is on; IPv6 is off; all current updates applied. Access point that Vista will not connect to properly is a Netgear WPN824 Firmware V2.0.15_1.0.11; DHCP on LAN Port ON (i.e. is LAN DHCP server)

View 4 Replies View Related

Enable Ati Adapter Displays Manager

Feb 4, 2009

This message appeared today: ATI WARNING The Catalyst Control Centre is not suppored by the driver version of your enabled graphics adapter. Please update you ATI graphic river, or enable your ATI adapter using the Displays Manager. But the thing is I dont know how to do this or what to do can someone help!!!!

View 4 Replies View Related

USB To Playstation 2 Adapter: Opened Up X-plane And Tested It Out And Nothing

Feb 12, 2010

Today i recieved a USB to Playstation 2 Adapter that i ordered from eBay, so i ran upstairs, plugged it in and checked game controllers to make sure it was there, and it was. So i plugged in my Logitech Cordless Action controller and the lights flashed and the receiver flashed so i assumed it was connected. Opened up X-plane and tested it out and nothing, did a bit of googleing and found a driver/program for the adapter, installed it and still nothing. Im wondering if it is because the controller i am using is wireless, but if it worked on my Playstation then it should work with this adapter, right? I hope this can be sorted as the Vista Forum has sorted lots of my problems out before.

View 9 Replies View Related

D-Link Internet Adapter Didnt Work

Jun 11, 2006

This is my connection to the internet. I have a driver, but when I installed it, it got an error and my internet didnt work. Is there a Vista Driver for a D-Link Wireless G USB Adapter (DWL-G122).

View 9 Replies View Related

WIRELESS Network Adapter FAILURE On ONLY AFTER SLEEP

Mar 23, 2008

1. My network has ALWAYS failed upon RESUME FROM SLEEP using a WIRELESS connection via a NETGEAR WN121T wireless-N USB 2.0 adapter, but NOT when using a wired Ethernet connection.

2. It also works perfectly from BOOT via the WN121T wireless connection with my NETGEAR DG834N draft 802.11n (and another 802.11g) wireless modem/router on Windows Vista Ultimate, both with and without the SP1 Release Candidate.

3. But upon resumption from SLEEP, the wireless n/w connection has ALWAYS failed: attempting to re-connect to the network fails, and Device Manager reports for the WN121T that ???Windows has stopped this device because it has reported problems (code 43)???.

4. The only remedy is to REBOOT.

5. The consequences of this are twofold:.........

View 9 Replies View Related

Optical Drives Dissapeared Wireless Adapter

Mar 13, 2009

I think it was after the updates loaded for windows incl. sp1 or after the vista patch for the game witcher which came from the microsoft site. Problem is that my optical drives dissappeared and the wireless adapter seemed to become D drive. Device manager says drivers missing but windows says has latest drivers. Have disk for both LG drives but computer cant see drive to be able to run.

View 6 Replies View Related

Integrated Realtek Network Adapter Does Not Recognize

May 18, 2008

Everything is working fine (so far) except that it does not recognize integrated Ethernet adapter at all. On advise of support guys did driver reinstall several time including while in Safe Mode. Even restored factory settings i.e. reinstalled OS. If I run "pnputil -e" then the adapter package is listed but the adapter just does not show up in Device Manager.

Already verified that it is enabled in BIOS. Netgear USB adapter worked just fine after installing vista driver for it. Thinking of putting in a PCI card but that will occupy one slot. Only 3 PCI slots are available - standard, Express 1 and Express 16.

View 7 Replies View Related

Blue Screen: Realtek Network Adapter?

Jan 20, 2010

I have been getting the BSOD for like a year now, but only frequently has it really been bothering me, it has happened 4 times today...

The error is consistant. Problem signature:

Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1033

Additional information about the problem:.........

View 8 Replies View Related

Tunnel Adapter Local Area Connection

Apr 11, 2008

Whenever I do an ipconfig I get a bunch of connections that are not active. It lists my active connections, but then I get a whole series of these: Tunnel adapter Local Area Connection* 6:

Media State ....... . : Media disconnected Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 7:
Media State . . . .. : Media disconnected Connection-specific DNS Suffix . :
Connection-specific DNS Suffix . :

They don't seem to be causing any harm and the only downside is that I sometimes have to scroll around to find the connection that is active. What are these?

View 5 Replies View Related

Silicon Motion Lynxem Adapter Can't Work

May 1, 2008

I have a VERY old Thinkpad (IBM) 500MHz/256MB - Ok ok enough laughing All of the drivers are installed for the GFX card, it is a "Silicon Motion LynxEM+" GFX adapter. Where you change the resolution, it will allow me to go to 800 x 600, 1024 x 768, 1280 x 1024 & 1600 x 600 - 800 x 600 works fine, but anything above that, & I have to scroll around to see the start menu etc. Is there anyway of going to a higher resolution and compacting this into the screen without scrolling?

View 4 Replies View Related

Not Displaying Option, Network Adapter Not Function Properly

Apr 4, 2009

My board is an Asus P5QC...the most unstable board I have ever owned... Anyway, I got this board since November and it was not running it's best but the I had the basics running. In the past 3 months, I have re-installed Vista 9 times I was blaming Vista, but I notice that my BIOS for some weird reason is not displaying some option that I had before. Now my network adapter will not function properly. I tried my old driver and the latest drivers, I installed it the way it is suppose to be installed and well...no success.
I tested all my cat 5 and they are all in good condition. My router is functionning well, seeing that my other computers are working.

View 9 Replies View Related

ADVERTISEMENT