Wireless Will Not Work With Any Adapter
Jul 2, 2008
I have a compaq presario desktop that I am trying to connect to a dlink wireless system. I have tried trendnet, linksys, and now Dlink usb wireless adapters but none will connect. They show up in the device manager as fine and dandy but will not enable. I am now trying the dlink WUA 1340 and downloaded the drivers from the dlink website.
I have also did a netsh wlan show settings and it says the autoconfig is disabled. Not sure if it should be enabled and have yet to find out how to enable it on this desktop. I have already tried the to do set autoconfig enabled=yes interface="?" as per technet instructions but just says wlansvc is not running. I am very frustrated and have had to drag the dlink router and dsl to telus to my computer so I can hook up by ethernet.
I have ran the gammut on this as I have even went through all the usb plugs and all are working and detect the wireless device. I have removed everything a few times and reinstalled without the dlink software etc. etc. etc.
View 8 Replies
ADVERTISEMENT
Feb 9, 2009
I have a issue with my Linksys wireless USB adapter. I am trying to use it with Vista Home Premium. After installing software... I plug the adapter in (like directions say) and windows update goes to work. It updates the driver, installs correctly, I then connect to my home network and all is good. My prob is for some reason I lose internet and the USB adapter itself. One time I switched users and lost all. I have tried uninstalling adapter and tried reinstalling by pointing to my D drive (install CD) in hopes of using the driver that's on the installation CD. as soon as it saw everything.. windows update once again gave me the same buggy driver. I have tried to install with UAC disabled... no luck... the Linksys website/support for drivers has the same updated driver. I tried to use an older one but Windows keeps forcing this updated one down my
throat.
View 6 Replies
View Related
Mar 23, 2008
I recenctly bought a new machine that has Vista Basic installed on it. I installed the latest drivers for my Netgear wireless adapter which are supposed to be Vista compatible. However, although I can get connected, I often have to mess around with the networking settings first and then the connection will only last around 15 minutes before the adapters led stops flashing. I then have to reboot to get a connection again. I tried the adapter back n my old XP machine and it is fine. As soon as the XP machine boots, the led indicator starts flashing and it doesn't stop until you shut down. With the Vista machine, the adapter often doesn't start flashing until you actually connect and then it will just stop after a short while. I've been messing around with this for weeks now and got nowhere. I would have suspected the adapter drivers, but it seems as though there are a lot of other people with the same problem on different adapters.
View 9 Replies
View Related
Jan 25, 2007
I have a WG111v2 which I bought just to be able to use Vista x64. It doesn't work well with games though, so I need an adapter with no dropouts and x64 support. Would be nice with some recommendations.
View 9 Replies
View Related
Apr 9, 2009
I went to a wired connection instead of wireless, and then decided to go back to wired. Since my wireless connection is through a linksys WUSB600N and it has known problems with skipping when playing games like World of Warcraft I turned off WLAN and had disabled my wireless adapter, then installed another program to run the connection (Which I had done previously though the last time I didn't turn off WLAN or disable my adapter). Then I went to enable the adapater and it wouldn't enable. I also turned back on WLAN and restarted. It still won't work. At this point nothing I do will enable my wireless adapater. It shows it is enabling but then it just keeps saying disabled. The light on the WUSB600N doesn't even turn on when I plug it in now, and it just worked less then 24 hours ago.
View 6 Replies
View Related
Oct 18, 2007
I've recently installed Vista Business on a new Dell PC. I've had problems installing the wireless adapter but in the end, Vista itself installed drivers for it though now the utility provided with the adapter doesn't work at all. The connection works fine until you try and download large files/use more bandwidth. For example; using a download manager like Flashget to download several files. From then it dwindles straight to 0kbps and then the whole connection dies, disconnects and the router is no longer available, according to Vista and yet the router is running fine with other computers on the network going strong. I've tried installing, updating, reinstalling drivers, altering the power settings and other internet settings to no avail.
View 4 Replies
View Related
Mar 16, 2009
I am new to Vista and my o/s is telling me I have Vista Home Premium (64 bit Operating System).
My PC is a Packard Bell iPower X9810. Motherboard is MS-7380
I wanted to insert a wireless PCI adapter into one of the vacant slots in my machine.
I purchased an Edimax wireless 802.11n 32 bit PCI adapter (model = EW-7728in).
I thought, after reading countless reviews this was going to be easy
So I popped it in and switched my machine back on (holding my breath). I saw the initial Packard Bell splash screen then was presented with a black empty screen with a flashing cursor in the top left hand corner
At this point I was rather concerned because I could hear my machine making a whiring noise (it didn't sound good).
After administering some smelling salts I proceeded to re-start crossing my fingers and it happened again. On the 3rd attempt I eventually got a sort of recovery screen that gave me one of two options 1) attempt a repair or 2) continue trying to load windows. I selected the first option and again held my breath.
After roughly 10 mins it had performed a system restore and I had turned back the clock to a previously known good state.
For the life of me I cannot understand why this happened. The manual that came with the card said to pop the adapter in the slot > boot up > run CD-ROM and hey presto but that did not happen.
When I looked at the mobo inside the machine the 2 PCI slots are ever so slightly offset and don't align tru with the covers you ping off the back of the tower. However, I must advise that the adapter went in without much of a struggle but must of " slightly " been on the wonk as I have already said the slots are not 100% in line with were the aerials stick out the back.
I'm scared to death now of breaking my machine and don't know what to do? The Edimax website says this is compatible with my 64 bit Vista so what gives?
View 9 Replies
View Related
Apr 8, 2010
This product is on the market and has not got a decent driver for Vista or 7. Edimax need their buts kicked for selling a product that is useless.
View 0 Replies
View Related
May 15, 2010
So I turned my laptop on today and for some reason it would not connect to the internet. I thought it might be the router so I rebooted that and still no luck. When troubleshooting it says; "This computer does not have a wireless network adapter installed and configured" So immediately I think the driver or my adapter has been uninstalled. If your wondering what my adapter was its; Nvidia nForce Networking Controller (x64 Windows Ultimate) I went on there website and found the driver, installed it and still nothing. I also found another program that was installed; Broadcom 802.11 Uninstaller I really need this fixed ,
View 5 Replies
View Related
Mar 23, 2008
1. My network has ALWAYS failed upon RESUME FROM SLEEP using a WIRELESS connection via a NETGEAR WN121T wireless-N USB 2.0 adapter, but NOT when using a wired Ethernet connection.
2. It also works perfectly from BOOT via the WN121T wireless connection with my NETGEAR DG834N draft 802.11n (and another 802.11g) wireless modem/router on Windows Vista Ultimate, both with and without the SP1 Release Candidate.
3. But upon resumption from SLEEP, the wireless n/w connection has ALWAYS failed: attempting to re-connect to the network fails, and Device Manager reports for the WN121T that ???Windows has stopped this device because it has reported problems (code 43)???.
4. The only remedy is to REBOOT.
5. The consequences of this are twofold:.........
View 9 Replies
View Related
Mar 13, 2009
I think it was after the updates loaded for windows incl. sp1 or after the vista patch for the game witcher which came from the microsoft site. Problem is that my optical drives dissappeared and the wireless adapter seemed to become D drive. Device manager says drivers missing but windows says has latest drivers. Have disk for both LG drives but computer cant see drive to be able to run.
View 6 Replies
View Related
Sep 17, 2007
It works fine except when I have tried to install my Belkin USB wireless adapter. I went to Belkins site and it told me to download the Ralink drivers, which I did. Nothing. Vista tells me that the device is working properly, but the light on the adapter is not lighting up, and Windows does not pick up any networks at all. I tried the PC with a second, identical adapter to see if it was the device causing the problem, but I have gotten the same response, which lead me to think it was an issue with Vista.
View 9 Replies
View Related
Aug 31, 2008
Have Netgear WGR614 v7 router,and Netgear WG111 wireless adapter. My PC is Vista 32bit, and my wifes's new one is Vista 64bit. Mine is direct and connection fine. My wife's PC connects but the connection is not steady and at times intermittent. I suspect I have purchase wrong hardware. The router was supplied by Time Warner, and their techs set it up. The have been back six times, and do not know what the answer is.
View 5 Replies
View Related
Dec 2, 2009
i have a sony Vaio VGN-Z12GN running windows vista. i turned the computer on today and the wireless is not working at all. i chk the network adaptors and both:
Microsoft ISATAP adapter 4
and
6T04 Adapter
have faults next to them. When i update them it states that they are already up to date. Also when i turn the wireless button on then off and the box appears on the screen showing: Vaio Smart Network, it shows - bluetooth, LAN and Modem ONLY. Even wireless has disappeared from here.
View 5 Replies
View Related
Jun 11, 2006
This is my connection to the internet. I have a driver, but when I installed it, it got an error and my internet didnt work. Is there a Vista Driver for a D-Link Wireless G USB Adapter (DWL-G122).
View 9 Replies
View Related
May 1, 2008
I have a VERY old Thinkpad (IBM) 500MHz/256MB - Ok ok enough laughing All of the drivers are installed for the GFX card, it is a "Silicon Motion LynxEM+" GFX adapter. Where you change the resolution, it will allow me to go to 800 x 600, 1024 x 768, 1280 x 1024 & 1600 x 600 - 800 x 600 works fine, but anything above that, & I have to scroll around to see the start menu etc. Is there anyway of going to a higher resolution and compacting this into the screen without scrolling?
View 4 Replies
View Related
Mar 28, 2009
I Just want to know why my screensaver doesn't work using a Microsoft wireless laser mouse, also microsoft wireless keyboard, windows vista.
View 9 Replies
View Related
Nov 29, 2008
I got a Nvidia 8400GS When i got the PC but brought a Sapphire ATI Radeon HD 3870 X2 / 1GB / PCI Express 2.0 / Graphics Card. My brother took out the Nvid card and then formated the PC to make sure that all drivers where uninstalled then put the ATI card in. In divice manager under dispaly adapters there is standard VGA Graphics Adapter and further down the page there is "Other Divices" with Video controller. When it installs these some times the standard VGA Graphics Adapter fail but the video controller succeed but with error. saying. "Incompatable display Adapter has been disabled. At least one display adapter on the system has been disabled because its not compatible with the driver for the VGA adapter". lso i carnt change the resolution above 1024X768. Also my Graphic card is a Sapphier brand but in the windows update its looking for ATI Technologies Inc. - Display - ASUS EAH3870X2 Series
View 9 Replies
View Related
Mar 27, 2008
I have a notebook. I can conect to my router but I don't have Internet just if I put the IP, but when I am out of the offic I need conect obtaining IP automatically. What can I do?
View 5 Replies
View Related
Apr 17, 2010
Vista HP 32bit....When I power on my laptop after not using the Power off.....so its coming out of Sleep....and you see RESUMING WINDOWS.....9 out of 10 times I won't get connected to my Router. I have used the Diagnostic Tool...and get the same results, which is, power off the Router...and power it back on...and when I do that, I do get re-connected.
View 4 Replies
View Related
Apr 16, 2008
My thinkpad laptop runs Windows Vista. the wireless worked ok before I install Vista SP1. After installing SP1, I only can actually view my wireless connections, I see everything, but upon connecting I get the "Connection is taking longer than usual" crap. I reinstalled the drivers, but no go. When Vista does the diagnostics, it says "The network adapter 'wireless network connection' is not correctly configured to use the IP protocol'". Then, there are two options below. 1 is about hardware and driver issues, the other is about the internet protocol bindings and IPv4 and Ipv6 being installed (which they are).
View 4 Replies
View Related
Feb 18, 2009
I bought a Netgear wireless router today so I can hook up multiple computers in my home. Problem is that when I hook everything according to the -schematics it does not go as planned. I have a verizon dsl modem and before I hook up my router everything works (internet). But when I connect my router I cannot get a connection at all. Also after I disconnected the router and connect just the dsl modem the way it was before I cannot get a connection either. I tried reseting the dsl box and I unhooked all the phone cords and ethernet cords and restarted the computer and it is still a no go. I am so confused I cannot understand it.
View 6 Replies
View Related
Nov 1, 2008
Hey guys ive got a Netgear USB wireless adaptor its the WN111. Theres 64 bit drivers for it but I believe they are beta drivers and the card has proven to be unreliable. It constantly disconnects and I get a connection probably 50% of the time.
View 5 Replies
View Related
Sep 1, 2009
1.) I've been (since I got the custom-built PC about a year ago) been using a wireless keyboard; the adapter is USB-connectable. All USB ports respond if/when I attach a device.
2.) I don't know the name of the "port," but where you'd normally plug-in any keyboard (6-pins, 1 square center pin, almost circle-shaped plug), I get no response.
3.) I tried plugging-in a wired keyboard that I borrowed from a friend. I even bought a new Microsoft keyboard, thinking the borrowed one was damaged. I'm positive at this point it's system/hardware-related.
4.) When I go into Device Manager and even view hidden devices, none of the drivers have that warning sign (yellow triangle + a "!" sign) by them. This indicates, to me at least, all my drivers are intact.
View 5 Replies
View Related
Aug 12, 2008
I have had no trouble instaling it in the past. But all of a sudden one day I chose to freshly install vista. So using the standard installation procedures and when I went to install my netgear usb wireless adapter Which used to work failed to install. I thought it was the adapter so I upgraded to a very nice d-link usb adapter...and that too failed to install. So I installed a fresh copy of so on he same drive and reformatted it and that worked just fine.
So I tried reinstalling vista and of course it didn't work. So now I'm really confused and typing this on the only available Internet device which happens to be an iPod touch LOL. Does anyone have an idea as to what is going wrong? Btw I have an oem copy of vista ultimate x64 pre sp1. The netgear adapter was the wusb111 and the d-link adapter is the dwa 160.
View 5 Replies
View Related
May 14, 2009
Any got experience of wireless N dongle that works good in Vista 64? I want it for my htpc. I have a D-link DI-855 router. OS: Win Vista 64 Ultimate
View 6 Replies
View Related
Mar 2, 2010
Have high speed internet. Have a 3gbsdram. And I have a router that is a g. Would I benefit as far as computer speed on the net with a router that is an n router. Also even though the computer says 802.11 a/g/n wireless I still would have to buy the the adapter that goes into the notebook? I know nothing about routers and the fact we have a g router it doesn't have an adapter needed for the computer to work. Was wondering if that is the same case with a wireless n router?
View 7 Replies
View Related
May 25, 2009
JUST set up a wireless network today through my linksys wrt54g2 router. And the Password I configured it with wont work. Meaning I can put nothing in the password space and still get in on wireless devices. WHAT THE HECK. Its only for my PS3, WII and NINTENDO ds. No laptops ITS WEP EDIT- Only wep passwords dont work. but my wireless games only work with wep. Also when clicking on wep once I got- Wep will stop wps because wifi protected setup doesnt support WEP/wpa-enterprise, wpa2-enterprise radius
View 4 Replies
View Related
Feb 26, 2009
My wireless mouse and keyboard no longer work. The mouse stoped working six mounths ago, and the keyboard a few days ago. I put in new batteries and read a couple of post on this forum. There are 5 listings under keyboards and thay all show to be working properly. There are 3 mouse and all show to be working properly.
View 3 Replies
View Related
Nov 28, 2007
Small home wireless LAN, Netgear WGR614v4 router, Using WPA, two XP machines, one Vista (home Basic ),
1) all working ok for many hours, except when
2) Vista machine goes to sleep mode. On wakeup, no connection. Network SSID is visible, good signal, but repeated attempts to connect fail.
3) Other computers connect to router, and internet fine. They can also standby/poweroff and restart fine. Still connected.
4) Reboot Vista computer, no help. Network settings look normal, just no connection to wireless router. Incredibly irritating Vista diagnostic tool suggests I connect to a another network, or recycle the router. (If the router was close enough to be easily recycled, I would just plug in an ethernet cable. But it is not, and I am tired of unnecessary trips to the basement.)
5) Power cycle router, and everything fine again.
View 9 Replies
View Related
May 20, 2008
I can't get online to update any of my drivers.. cuz my wireless card doesn't work. I even tried the disk, it only has x86 on it. so I ran a hardwire, can't usually, it's on the floor. so I used it and downloaded some things 'm having NO luck with it. It's a Airlink Mimo XR 802.11G PCI Adapter mdel AWLH5026.
View 7 Replies
View Related
