Wireless Not Work After Install SP1
Apr 16, 2008
My thinkpad laptop runs Windows Vista. the wireless worked ok before I install Vista SP1. After installing SP1, I only can actually view my wireless connections, I see everything, but upon connecting I get the "Connection is taking longer than usual" crap. I reinstalled the drivers, but no go. When Vista does the diagnostics, it says "The network adapter 'wireless network connection' is not correctly configured to use the IP protocol'". Then, there are two options below. 1 is about hardware and driver issues, the other is about the internet protocol bindings and IPv4 and Ipv6 being installed (which they are).
View 4 Replies
ADVERTISEMENT
Aug 12, 2008
I have had no trouble instaling it in the past. But all of a sudden one day I chose to freshly install vista. So using the standard installation procedures and when I went to install my netgear usb wireless adapter Which used to work failed to install. I thought it was the adapter so I upgraded to a very nice d-link usb adapter...and that too failed to install. So I installed a fresh copy of so on he same drive and reformatted it and that worked just fine.
So I tried reinstalling vista and of course it didn't work. So now I'm really confused and typing this on the only available Internet device which happens to be an iPod touch LOL. Does anyone have an idea as to what is going wrong? Btw I have an oem copy of vista ultimate x64 pre sp1. The netgear adapter was the wusb111 and the d-link adapter is the dwa 160.
View 5 Replies
View Related
Mar 28, 2009
I Just want to know why my screensaver doesn't work using a Microsoft wireless laser mouse, also microsoft wireless keyboard, windows vista.
View 9 Replies
View Related
Jul 2, 2008
I have a compaq presario desktop that I am trying to connect to a dlink wireless system. I have tried trendnet, linksys, and now Dlink usb wireless adapters but none will connect. They show up in the device manager as fine and dandy but will not enable. I am now trying the dlink WUA 1340 and downloaded the drivers from the dlink website.
I have also did a netsh wlan show settings and it says the autoconfig is disabled. Not sure if it should be enabled and have yet to find out how to enable it on this desktop. I have already tried the to do set autoconfig enabled=yes interface="?" as per technet instructions but just says wlansvc is not running. I am very frustrated and have had to drag the dlink router and dsl to telus to my computer so I can hook up by ethernet.
I have ran the gammut on this as I have even went through all the usb plugs and all are working and detect the wireless device. I have removed everything a few times and reinstalled without the dlink software etc. etc. etc.
View 8 Replies
View Related
Mar 27, 2008
I have a notebook. I can conect to my router but I don't have Internet just if I put the IP, but when I am out of the offic I need conect obtaining IP automatically. What can I do?
View 5 Replies
View Related
Apr 17, 2010
Vista HP 32bit....When I power on my laptop after not using the Power off.....so its coming out of Sleep....and you see RESUMING WINDOWS.....9 out of 10 times I won't get connected to my Router. I have used the Diagnostic Tool...and get the same results, which is, power off the Router...and power it back on...and when I do that, I do get re-connected.
View 4 Replies
View Related
Feb 18, 2009
I bought a Netgear wireless router today so I can hook up multiple computers in my home. Problem is that when I hook everything according to the -schematics it does not go as planned. I have a verizon dsl modem and before I hook up my router everything works (internet). But when I connect my router I cannot get a connection at all. Also after I disconnected the router and connect just the dsl modem the way it was before I cannot get a connection either. I tried reseting the dsl box and I unhooked all the phone cords and ethernet cords and restarted the computer and it is still a no go. I am so confused I cannot understand it.
View 6 Replies
View Related
Nov 1, 2008
Hey guys ive got a Netgear USB wireless adaptor its the WN111. Theres 64 bit drivers for it but I believe they are beta drivers and the card has proven to be unreliable. It constantly disconnects and I get a connection probably 50% of the time.
View 5 Replies
View Related
Sep 1, 2009
1.) I've been (since I got the custom-built PC about a year ago) been using a wireless keyboard; the adapter is USB-connectable. All USB ports respond if/when I attach a device.
2.) I don't know the name of the "port," but where you'd normally plug-in any keyboard (6-pins, 1 square center pin, almost circle-shaped plug), I get no response.
3.) I tried plugging-in a wired keyboard that I borrowed from a friend. I even bought a new Microsoft keyboard, thinking the borrowed one was damaged. I'm positive at this point it's system/hardware-related.
4.) When I go into Device Manager and even view hidden devices, none of the drivers have that warning sign (yellow triangle + a "!" sign) by them. This indicates, to me at least, all my drivers are intact.
View 5 Replies
View Related
May 14, 2009
Any got experience of wireless N dongle that works good in Vista 64? I want it for my htpc. I have a D-link DI-855 router. OS: Win Vista 64 Ultimate
View 6 Replies
View Related
Mar 2, 2010
Have high speed internet. Have a 3gbsdram. And I have a router that is a g. Would I benefit as far as computer speed on the net with a router that is an n router. Also even though the computer says 802.11 a/g/n wireless I still would have to buy the the adapter that goes into the notebook? I know nothing about routers and the fact we have a g router it doesn't have an adapter needed for the computer to work. Was wondering if that is the same case with a wireless n router?
View 7 Replies
View Related
May 25, 2009
JUST set up a wireless network today through my linksys wrt54g2 router. And the Password I configured it with wont work. Meaning I can put nothing in the password space and still get in on wireless devices. WHAT THE HECK. Its only for my PS3, WII and NINTENDO ds. No laptops ITS WEP EDIT- Only wep passwords dont work. but my wireless games only work with wep. Also when clicking on wep once I got- Wep will stop wps because wifi protected setup doesnt support WEP/wpa-enterprise, wpa2-enterprise radius
View 4 Replies
View Related
Feb 26, 2009
My wireless mouse and keyboard no longer work. The mouse stoped working six mounths ago, and the keyboard a few days ago. I put in new batteries and read a couple of post on this forum. There are 5 listings under keyboards and thay all show to be working properly. There are 3 mouse and all show to be working properly.
View 3 Replies
View Related
Nov 28, 2007
Small home wireless LAN, Netgear WGR614v4 router, Using WPA, two XP machines, one Vista (home Basic ),
1) all working ok for many hours, except when
2) Vista machine goes to sleep mode. On wakeup, no connection. Network SSID is visible, good signal, but repeated attempts to connect fail.
3) Other computers connect to router, and internet fine. They can also standby/poweroff and restart fine. Still connected.
4) Reboot Vista computer, no help. Network settings look normal, just no connection to wireless router. Incredibly irritating Vista diagnostic tool suggests I connect to a another network, or recycle the router. (If the router was close enough to be easily recycled, I would just plug in an ethernet cable. But it is not, and I am tired of unnecessary trips to the basement.)
5) Power cycle router, and everything fine again.
View 9 Replies
View Related
May 20, 2008
I can't get online to update any of my drivers.. cuz my wireless card doesn't work. I even tried the disk, it only has x86 on it. so I ran a hardwire, can't usually, it's on the floor. so I used it and downloaded some things 'm having NO luck with it. It's a Airlink Mimo XR 802.11G PCI Adapter mdel AWLH5026.
View 7 Replies
View Related
Mar 25, 2008
I have a Windows XP Home desktop connected to a printer via USB and, I have a Windows Vista Premium laptop connected through a wireless network. Print jobs initiated from the laptop hang up in the print queue with a print error, and also show up on the desktop under the print jobs as a print error. Print jobs iniated from the desktop work just fine. Please help with a solution to my wireless network printing problem.
View 5 Replies
View Related
Mar 23, 2008
Just got a nice wireless keyboard and mouse. Problem is, when the machine is rebooted, these devices dont work anymore. I have to unplug the USB cable of the remote sensing unit, and plug it back in to get the devices to work. Needless to say, this is a pain. This is a Micro Innovations wireless keyboard and mouse, and Im using the latest Vista drivers (according to them).
View 4 Replies
View Related
Apr 28, 2008
I have managed to break the bluetooth dongle that came with this keyboard/mouse and have tried 3 different brands of dongles with no success. My question is does Microsoft replace the dongles with this Mouse/Keyboard
View 4 Replies
View Related
Jun 22, 2009
I cant connect to any wireless network using my laptop. On the network icon in the bottom left of the screen it says Connection status: unknown Access is denied It works fine using the wired connection but it still shows as disconnected!Also when trying to install a program it says The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.This is all happening when using the main administrator account, when using the standard user account or guest account everything works fine
View 9 Replies
View Related
Mar 23, 2008
I am trying to get the Fingerprint Reader to work, but no luck! When I start the "Fingerprint registration wizard', I get the following message: "Error Invalid class string. Suspect installation problem." I have un-installed, re-installed at least 10times. no luck. I got the newest software from MicroSoft, DPPM_201_ENG.exe. (it says: VISTA Compatible).Mouse works just fine. I googled for an answer, I found the same problem that others also have, but nobody had an answer. I installed also under Windows XP, there it works perfectly with the same installation software. Checked at the MS-knowledge base, fix recommendations are more than 2 years old, tried it anyway, still no luck. Changed USB ports, ran it as Windows XP compatible, tried really everything, I am really at a loss. Hopefully someone out there has/had the same problem and got it working? After 2 days of trying I'm really getting..., well you know what I mean!
View 9 Replies
View Related
Apr 4, 2008
I have downloaded the cisco vpn client v 5.0.03.0390. I have a secondary internet connection at work which is wireless. When my laptop saw this connection it came up with a pop up that asked me if i wanted to connect, i did then it asked me if this was a work, home or public connection i labeled it as work. I have been testing on this work wireless connection and ran the cisco VPN client and it was able to
connect.
Now i got home and the same wireless configuration pop up came on, i setup my home wireless and it again asked me if it was a work, home or public connection i choose home. Also, i have WEP running on my home network. My cisco VPN client keeps coming back with the following error: "Secure VPN connection terminated locally by the client. Reason 412: The remote peer is no longer responding"........
View 5 Replies
View Related
Feb 23, 2009
keyboard and mouse are microsoft multimedia keyboard and wireless optical mouse 2000.
The screen saver does not work when you use a Microsoft wireless pointing device on a Windows Vista-based computer
View 5 Replies
View Related
May 19, 2008
On my Windows Vista Home Premium system am unable to install my MS Wireless Laser Mouse 5000 v.1.0. My MS Wireless Laser/Keyboard 6000 v.2.0 works fine. I receive a message from my system that Windows needs to install drivers for Microsoft Wireless Desktop Receiver 3.1. The instructions for the Receiver, Keyboard and Mouse, which came together as a package, makes reference to a Help screen, but I cannot find anything installed. I looked at KB940199, and attempted to install the named driver; but I received an error message that Windows encountered an error, 0X8007000d, the Data is invalid.
View 9 Replies
View Related
Jun 24, 2009
I installed vista on my mum and dads pc last night and all was going perfect until about an hour ago when I fitted the wireless network card to get on the internet and it wouldnt install fully and I get a message saying that I need a driver for the IEEE1394 controller ?? I cant get on the internet on that pc to check for drivers so im using my laptop but cant find any drivers,Ive also installed driver robot and that came up with a few drivers so i stuck them on a usb stick and installed but no luck.Ive gone into the device manager and under "other devices" the IEEE1394 controller is showing as a little question mark so ive gone into that and its saying no drivers are installed. I think its been like this from the second i installed vista but ive just noticed it when i tried to instal the wireless network card.Any ideas of how to fix this please ? and is it solveable ? I can not find any drivers for my mobo at all. the mobo is the asus p4p800 se
View 5 Replies
View Related
Jun 17, 2008
Everything I've read said that doing a clean install would delete all of my files during the process which is what I needed. I wanted everything off of my computer except what came on it. I called myself doing it correctly but when I checked, none of my files were gone and my Recovery D drive has no space left which is why I needed to do a clean install in the first place.
View 4 Replies
View Related
Dec 28, 2007
COD 4 doesn't work after install. Some people have complained about this but no solution has been presented. How do you get it past the program stops working screen?
View 5 Replies
View Related
Jan 5, 2010
I am recieving error messages when I try to update my system I am also unable to successfully download Itunes as I recieve error message "error occurred during installation of assembly policy 8.0.microsoft.vc80.CRT, version 8.0.50727.403 type win 32 policy public key token=1fc8b3b901e18e3bprocess architecture=x86 Quicktime installs OK, but Itunes install is interruped -- Apple Support install portion is rolled back after this error pops up. I went thru suggested Apple troubleshooting options, got same error. Ran install as administrator from desktop, also did not work. Tried installing both thru apple software updater and directly from Apple website, Has anyone exp these issues? I have windows vista home premium
View 5 Replies
View Related
Mar 26, 2008
my PC crashed and will not boot, the NTOSKRNL.EXE is missing or corrupt, repair from the DVD does nor fix the problem. I need to reinstall but the only option I get when bootin from the DVD is to "Install from Windows" but Windows will not boot up.
View 4 Replies
View Related
Jul 25, 2009
I am really frustrated. I installed SP2 on my 32 bit Vista Ultimate and it failed on stage 3 of 3 at 100% and rewound itself and rebooted. I then tried my 64 bit system and it installed fine. Tried my 32bit system again and it failed so bad I had to restore C from a backup. Even a recovery would not work. Then did searches as to why this may be happening and tried all the bits advised. Ran the SFC and it reported errors and said it fixed them, ran it again and it found no errors, did the rearm thing even though I did not use any betas and my version is activated, ran the SP2 readyness and it reports no errors, have no disk management software installed so that is not the issue but everytime after it gets to stage 3 of 3, 100% it sits there for ages spinning the disk and then fails and reverts the changes.
Have used the online update and also the standalone update and that reports an E_FAIL (0x80004005). The log file that is produced is huge and gives so much information you can't make head nor tail out of it. I am certainly not taking MS's option and doing a complete reinstall as then I would have to reinstall all of my software and bother heaps of companies for activations again.
View 9 Replies
View Related
May 5, 2008
I have had the common problem on not being able to install KB938371 update which is one of the 3 prerequisites to downloading through Microsoft Update the SP1. I have tried all the tricks and suggestion published throughout the web except an in place reinstall of Vista Business. This is highly undesireable since my sony laptop will only reinstall Vista Business as per original with all the software originally shipped which is a pain to remove.
If I download the entire sp1 750mb file, will it install without the prerequsite files? I have read that the prerequisites were actually a compilation of sp1 files and not an actual update to Vista. This being the case, it seems that if the sp1 file were downloaded it would work.
View 9 Replies
View Related
Nov 23, 2009
I can't use MSN messenger unless I install a newer version, but this doesn't work. When I run the installer i get the following error message: "messenger couldnt be installed because we had trouble installing these requirements: * Microsoft Application Error Reporting Try installing Windows Live programs again. Program were not installed because the installation was canceled. aborted:0x80004004. * Microsoft Visual Studio Runtime Try installing Windows Live programs again. Programs were not installed because the installation was cancelled. aborted:0x80004004 * Windows live call. The installer has insufficient prviliges to access this directory; :programdatamicrosoftWindowsstartmenuprogramswindows live. The installer cannot continue. Log on as adminstrator or contact your system administrator. Please close all other programs and then try again. It looks like another program is preventign the installer from working. hr:0x80070643.
I tried quite a bit:
- I am admininistrator and have all rights.
- Downloaded the installer and ran it as administrator
- Downloaded the whole file (wlsetup-all.exe, 134MB) and tried to run it (as administrator), instead of the installer itself (wlsetup-custom.exe, 1mb).....
View 5 Replies
View Related
