Wireless USB Adapter Not Working
Oct 18, 2007
I've recently installed Vista Business on a new Dell PC. I've had problems installing the wireless adapter but in the end, Vista itself installed drivers for it though now the utility provided with the adapter doesn't work at all. The connection works fine until you try and download large files/use more bandwidth. For example; using a download manager like Flashget to download several files. From then it dwindles straight to 0kbps and then the whole connection dies, disconnects and the router is no longer available, according to Vista and yet the router is running fine with other computers on the network going strong. I've tried installing, updating, reinstalling drivers, altering the power settings and other internet settings to no avail.
View 4 Replies
ADVERTISEMENT
Aug 31, 2008
Have Netgear WGR614 v7 router,and Netgear WG111 wireless adapter. My PC is Vista 32bit, and my wifes's new one is Vista 64bit. Mine is direct and connection fine. My wife's PC connects but the connection is not steady and at times intermittent. I suspect I have purchase wrong hardware. The router was supplied by Time Warner, and their techs set it up. The have been back six times, and do not know what the answer is.
View 5 Replies
View Related
Dec 2, 2009
i have a sony Vaio VGN-Z12GN running windows vista. i turned the computer on today and the wireless is not working at all. i chk the network adaptors and both:
Microsoft ISATAP adapter 4
and
6T04 Adapter
have faults next to them. When i update them it states that they are already up to date. Also when i turn the wireless button on then off and the box appears on the screen showing: Vaio Smart Network, it shows - bluetooth, LAN and Modem ONLY. Even wireless has disappeared from here.
View 5 Replies
View Related
Feb 9, 2009
I have a issue with my Linksys wireless USB adapter. I am trying to use it with Vista Home Premium. After installing software... I plug the adapter in (like directions say) and windows update goes to work. It updates the driver, installs correctly, I then connect to my home network and all is good. My prob is for some reason I lose internet and the USB adapter itself. One time I switched users and lost all. I have tried uninstalling adapter and tried reinstalling by pointing to my D drive (install CD) in hopes of using the driver that's on the installation CD. as soon as it saw everything.. windows update once again gave me the same buggy driver. I have tried to install with UAC disabled... no luck... the Linksys website/support for drivers has the same updated driver. I tried to use an older one but Windows keeps forcing this updated one down my
throat.
View 6 Replies
View Related
Mar 23, 2008
I recenctly bought a new machine that has Vista Basic installed on it. I installed the latest drivers for my Netgear wireless adapter which are supposed to be Vista compatible. However, although I can get connected, I often have to mess around with the networking settings first and then the connection will only last around 15 minutes before the adapters led stops flashing. I then have to reboot to get a connection again. I tried the adapter back n my old XP machine and it is fine. As soon as the XP machine boots, the led indicator starts flashing and it doesn't stop until you shut down. With the Vista machine, the adapter often doesn't start flashing until you actually connect and then it will just stop after a short while. I've been messing around with this for weeks now and got nowhere. I would have suspected the adapter drivers, but it seems as though there are a lot of other people with the same problem on different adapters.
View 9 Replies
View Related
Jan 25, 2007
I have a WG111v2 which I bought just to be able to use Vista x64. It doesn't work well with games though, so I need an adapter with no dropouts and x64 support. Would be nice with some recommendations.
View 9 Replies
View Related
Jul 2, 2008
I have a compaq presario desktop that I am trying to connect to a dlink wireless system. I have tried trendnet, linksys, and now Dlink usb wireless adapters but none will connect. They show up in the device manager as fine and dandy but will not enable. I am now trying the dlink WUA 1340 and downloaded the drivers from the dlink website.
I have also did a netsh wlan show settings and it says the autoconfig is disabled. Not sure if it should be enabled and have yet to find out how to enable it on this desktop. I have already tried the to do set autoconfig enabled=yes interface="?" as per technet instructions but just says wlansvc is not running. I am very frustrated and have had to drag the dlink router and dsl to telus to my computer so I can hook up by ethernet.
I have ran the gammut on this as I have even went through all the usb plugs and all are working and detect the wireless device. I have removed everything a few times and reinstalled without the dlink software etc. etc. etc.
View 8 Replies
View Related
Apr 9, 2009
I went to a wired connection instead of wireless, and then decided to go back to wired. Since my wireless connection is through a linksys WUSB600N and it has known problems with skipping when playing games like World of Warcraft I turned off WLAN and had disabled my wireless adapter, then installed another program to run the connection (Which I had done previously though the last time I didn't turn off WLAN or disable my adapter). Then I went to enable the adapater and it wouldn't enable. I also turned back on WLAN and restarted. It still won't work. At this point nothing I do will enable my wireless adapater. It shows it is enabling but then it just keeps saying disabled. The light on the WUSB600N doesn't even turn on when I plug it in now, and it just worked less then 24 hours ago.
View 6 Replies
View Related
Mar 16, 2009
I am new to Vista and my o/s is telling me I have Vista Home Premium (64 bit Operating System).
My PC is a Packard Bell iPower X9810. Motherboard is MS-7380
I wanted to insert a wireless PCI adapter into one of the vacant slots in my machine.
I purchased an Edimax wireless 802.11n 32 bit PCI adapter (model = EW-7728in).
I thought, after reading countless reviews this was going to be easy
So I popped it in and switched my machine back on (holding my breath). I saw the initial Packard Bell splash screen then was presented with a black empty screen with a flashing cursor in the top left hand corner
At this point I was rather concerned because I could hear my machine making a whiring noise (it didn't sound good).
After administering some smelling salts I proceeded to re-start crossing my fingers and it happened again. On the 3rd attempt I eventually got a sort of recovery screen that gave me one of two options 1) attempt a repair or 2) continue trying to load windows. I selected the first option and again held my breath.
After roughly 10 mins it had performed a system restore and I had turned back the clock to a previously known good state.
For the life of me I cannot understand why this happened. The manual that came with the card said to pop the adapter in the slot > boot up > run CD-ROM and hey presto but that did not happen.
When I looked at the mobo inside the machine the 2 PCI slots are ever so slightly offset and don't align tru with the covers you ping off the back of the tower. However, I must advise that the adapter went in without much of a struggle but must of " slightly " been on the wonk as I have already said the slots are not 100% in line with were the aerials stick out the back.
I'm scared to death now of breaking my machine and don't know what to do? The Edimax website says this is compatible with my 64 bit Vista so what gives?
View 9 Replies
View Related
Apr 8, 2010
This product is on the market and has not got a decent driver for Vista or 7. Edimax need their buts kicked for selling a product that is useless.
View 0 Replies
View Related
May 15, 2010
So I turned my laptop on today and for some reason it would not connect to the internet. I thought it might be the router so I rebooted that and still no luck. When troubleshooting it says; "This computer does not have a wireless network adapter installed and configured" So immediately I think the driver or my adapter has been uninstalled. If your wondering what my adapter was its; Nvidia nForce Networking Controller (x64 Windows Ultimate) I went on there website and found the driver, installed it and still nothing. I also found another program that was installed; Broadcom 802.11 Uninstaller I really need this fixed ,
View 5 Replies
View Related
Mar 23, 2008
1. My network has ALWAYS failed upon RESUME FROM SLEEP using a WIRELESS connection via a NETGEAR WN121T wireless-N USB 2.0 adapter, but NOT when using a wired Ethernet connection.
2. It also works perfectly from BOOT via the WN121T wireless connection with my NETGEAR DG834N draft 802.11n (and another 802.11g) wireless modem/router on Windows Vista Ultimate, both with and without the SP1 Release Candidate.
3. But upon resumption from SLEEP, the wireless n/w connection has ALWAYS failed: attempting to re-connect to the network fails, and Device Manager reports for the WN121T that ???Windows has stopped this device because it has reported problems (code 43)???.
4. The only remedy is to REBOOT.
5. The consequences of this are twofold:.........
View 9 Replies
View Related
Mar 13, 2009
I think it was after the updates loaded for windows incl. sp1 or after the vista patch for the game witcher which came from the microsoft site. Problem is that my optical drives dissappeared and the wireless adapter seemed to become D drive. Device manager says drivers missing but windows says has latest drivers. Have disk for both LG drives but computer cant see drive to be able to run.
View 6 Replies
View Related
Sep 17, 2007
It works fine except when I have tried to install my Belkin USB wireless adapter. I went to Belkins site and it told me to download the Ralink drivers, which I did. Nothing. Vista tells me that the device is working properly, but the light on the adapter is not lighting up, and Windows does not pick up any networks at all. I tried the PC with a second, identical adapter to see if it was the device causing the problem, but I have gotten the same response, which lead me to think it was an issue with Vista.
View 9 Replies
View Related
Apr 11, 2009
I am using a windows Vista 32 bit home premium notebook computer for which the wireless network detection has stopped working. I updated the driver for the built in wireless card with out any results. I also tried a plug in wireless card which windows detected and said was working properly and this did not work either. This leaves me to believe that something is wrong with the OS. I can get on the internet via dialup modem and also by the ethernet connection with a DSL modem. I have been to several hotspots that I know have wifi and no networks show up. All critical windows updates have been installed.
View 9 Replies
View Related
Jan 18, 2009
The Microsoft 6to4 adapter showed in the device manager that it was not working properly. If you look at yours it may show the same. I think I disabled it trying to update it. This was before I found this short sweet article from Microsoft. Does anyone know if I will experience problems in the future when this new technology gets more prevalent? If so, how do I get it back. I followed the instructions that a vista pro gave me to fix this problem and it shows in the reliability monitor that it was installed...but it is not showing int he device manager. Would it be installed but not show on the device manager?
View 6 Replies
View Related
Nov 29, 2008
I got a Nvidia 8400GS When i got the PC but brought a Sapphire ATI Radeon HD 3870 X2 / 1GB / PCI Express 2.0 / Graphics Card. My brother took out the Nvid card and then formated the PC to make sure that all drivers where uninstalled then put the ATI card in. In divice manager under dispaly adapters there is standard VGA Graphics Adapter and further down the page there is "Other Divices" with Video controller. When it installs these some times the standard VGA Graphics Adapter fail but the video controller succeed but with error. saying. "Incompatable display Adapter has been disabled. At least one display adapter on the system has been disabled because its not compatible with the driver for the VGA adapter". lso i carnt change the resolution above 1024X768. Also my Graphic card is a Sapphier brand but in the windows update its looking for ATI Technologies Inc. - Display - ASUS EAH3870X2 Series
View 9 Replies
View Related
Jan 10, 2009
I have problem with connecting to a network through wireless. I think I got it because I installed a new hd and vista, so my laptop is essentially new. But for some reason, I seem to not be getting any wireless connectivity to the internet. It used to work before my hd broke down, and now, my "new" laptop doesn't seem to know that I have wireless.
The only way I can connect through the internet is by using ethernet and connecting the laptop with my dsl modem.
View 6 Replies
View Related
Jul 22, 2008
I recently had other problems with my personal notebook but now i have another issue i can't connect to the internet the diagnostics keeps telling me to reset or check and make sure everything is fine but im positive it is ; the other computer and notebook in my household has internet and is working fine.
View 5 Replies
View Related
Mar 23, 2008
I recently purchased a Dynex wireless optical mouse for my laptop running vista. after installing the driver and software I can not get the mouse to work. When I physically move the mouse the light on the receiver blinks but the mouse does not move on the screen. I tried plugging the mouse into another system I have running xp and have zero problems. When I open device manager and look under universal serial bus controllers, the standard OpenHCD USB Host Controller says it does not have enough free resources.
View 5 Replies
View Related
Apr 15, 2008
My wireless internet used to work and one day i turned my computer on and it no longer worked. I have a HP pavillion dv6000 laptop, the switch for wireless networking is on and when i click diagnose the problem it says "This computer does not have a wireless network adapter installed and configured. Install wireless networking hardware and verify that the correct drivers are loaded."
View 5 Replies
View Related
Jul 2, 2008
I recently got a sony vaio laptop installed vista and my wireless router will not work. I had no problems using it when I had my previous laptop, a HP with windows XP. When i try to connect to the router I am trying to install I get a message saying the computer cannot find any connection and to try again, I can assure I have done all the steps correctly. I also tried to connect to other wireless connections in my area as a test because i can't i get a message saying cannot connect. (and I have checked that the WLAN is on everytime).
View 5 Replies
View Related
Dec 3, 2008
My computer no longer recognizes any of my wireless networks. But when I go into "manage wireless networks" all of them are there. I've tried resetting the adapter and command prompts but it says that I am denied/blocked from accessing them.
In my Device Manager the only thing that has a little yellow triangle is a 'Non Plug Non Play' item called npkcrypt. Is there any reason why I can't access the internet other then connecting my laptop directly to it? I'm using an Acer with Windows Vista Home Premium 32bit. Anyone know what's going on?
View 5 Replies
View Related
Apr 26, 2009
One computer upstairs with modium and router right next to computer getting full bars and great signal. My computer, downstairs aprx 8 mtrs away, brick house getting only 3 bars. When the upstairs computer is turned on I get no bars hence no signal. If i turn upstairs computer off I than get signal. The range says indoors up to 46mtrs, 100 mtrs outdoors. Why would having the upstairs computer on effect my signal downstairs? Do I need a better router of better modium. What can I do?
View 6 Replies
View Related
Aug 20, 2009
Have installed vista over xp everything fine except my wireless connection press switch but have been told software update or driver needed for acer aspire 1690 anyone know where I can look? my belkin adaptor allows me to connect fine.
View 4 Replies
View Related
Aug 18, 2008
My wireless internet used to work and one day i turned my computer on and it no longer worked. I have a HP pavillion dv6000 laptop, the switch for wireless networking is on and when i click diagnose the problem it says "This computer does not have a wireless network adapter installed and configured. Install wireless networking hardware and verify that the correct drivers are loaded."
View 4 Replies
View Related
Nov 24, 2008
I've been having this issue ever since I bought my new tablet pc. I am connected wirelessly to a network here at work. I've never had an issue with any other computer before until this one. I'm using a Vista 64 ultimate and this is my issue. I connect to the wireless network... I can browse the internet just fine. I have a shortcut on my desktop \192.168.1.200location Once I click on that it ask me for my user id and password so I enter and I then get to the network folder. After a few seconds it says Not Responding and I can no longer connect to the network or the internet although I can ping all internet addresses just fine. Disconnecting from the wireless and reconneting does not work... Disabling and reenabling doesn't work either. I have to shut down the pc and restart for it to come back up.
View 4 Replies
View Related
Mar 28, 2008
I had a network setup running well, consisting of 3 computers with each one running XP. I replaced my "main" desktop with a new Acer 5100 unit running Vista Premium. It is the only one connected to the router/DSL modem (Westell 327w). Even after reading all the previous posts and responses, I can't get this darned Vista box to see the two XP's that are also on the same network. Only the Windows firewalls (with sharing excepted) are turned on, same workgroup, passwords' use turned off. REGARDLESS OF SHARING SETTINGS, DRIVE PROPERTIES SHOW THAT THE DRIVES are "NOT SHARED." The two XP units show each other but not the Vista box. Vista shows only Vista. 'Bout ready to strip Vista off and reload XP
View 4 Replies
View Related
Aug 29, 2009
I have a Compaq Presario f730US. I run Vista 32bit. When I got the computer back the next day, I could no longer get wireless. The Wireless button on the front won't turn blue. I have tried installing the drivers. I can use the ethernet but I got a laptop so I woulldn't be on a leash.
View 4 Replies
View Related
Feb 20, 2009
computer:bought 2 weeks ago hp pavilion dv4-1220 us vista home premium x64
internet:baught 2 weeks ago alltel wireless hauwei ec168 rev a
connection drops while i am downloading files or tring to watch a video using flashplayer internet goes "dormant" sometimes if i am extremely lucky it will hold longer then other times. i have no problem surfing the net. just "buffering" videos and downloading files i.e. patching wow or watching videos on myspace,Internet, or anywhere that invovles a flashplayer. its seems to be at random.
View 4 Replies
View Related
Jan 26, 2009
I have a new Wireless Desktop 600 Keyboard and when I am using my autotext in Word F3 should finish the autotext but it is not working. When I click F3 after typing the beginning text it repeats what I have typed half the time, the other half it deletes.
View 7 Replies
View Related
