Local Only Connection: "Limited Connectivity"
Apr 29, 2009
From time to time, specially when I`m doing heavy uploads or heavy downloads my connection goes from full internet to "Local Only" or "Limited Connectivity". Thus, all internet access is lost until I reset the connection (disconnect and connect again). When the connection is reset, the problem is solved and the issue is fixed, that is, until it happens again a few hours or days later.
I`ve found out that this is quite an usual problem for all Vista users, most of my friends have this same problem and I`ve seen hundreads of posts in the internet about it, but no solutions were found. I`m running Windows Vista Home Premium 64bit on a HP dv7-1245dx notebook. I have another PC which also runs Vista 64bit, two notebooks and a PC that run WinXP.
From all of these machines, only the ones running Vista are affected, I do not have this problem with the machines running WinXP. All machines are wireless (connected through WIFI) but the PC running WinXP. I`ll use my main notebook as the scenario for troubleshooting. ...........
View 9 Replies
ADVERTISEMENT
Aug 21, 2009
I lost connection thinking it was the laptop i tried switching off the wireless card and deleting teh settings however it did not help. I only realised i had just lost connection completely. Now every time i connect i get unidentified ntework limited connectivity.
View 4 Replies
View Related
Nov 19, 2009
I am the manager of my network at my house and i have set up my router with an encryption key i can remember. My mom just got a new laptop and we can not connect to it because i FORGOT THE KEY! My computer is wired directly to the router. I went to my IP address and wouldnt you know it, i forgot the login info! I can reset the router from the router itself, but it took me a while to set it up. Is there any way i can get around my login since i am directly connected?
View 6 Replies
View Related
Jan 29, 2009
I've been having this issue with Vista for over a year now. I just recently reformatted my machine AND bought a new PCI network card (I thought maybe the problem might be related to the onboard network port/driver) and the issue still persists.
This is a nasty one. My network connection simply cuts out at random times. By random I mean I'll be connected between 15 or so minutes to up to 2 or 3 days before the problem occurs. My network icon down in the task tray will show a yellow exclaimation with the message "limited network connectivity." The only way to fix this is to reboot. What's worse is that there are no errors in thrown in any of the Event Viewer logs.
View 9 Replies
View Related
Feb 18, 2009
The computer starts up with wireless networking and wireless connection working fine. At some seemingly random time (usually a few hours) my connection status will go from "local and internet" to "limited connectivity" with the little yellow warning icon. I try disconnecting and reconnecting, it can't connect. I turn off and on the adapter using the on-keyboard button, it says it is going "off" then "on" but connection is not restored. "Repair" attempts fail immediately, with no explanation given, it just says it can't connect.
I can't ping any IP address or websites, I get "host unreachable" messages. The only solution is to restart, at which point everything is fine. Note that in this time when the wireless is not functioning, I can plug in an ethernet cable and be connected to the internet just fine. I did IPCONFIG/ALL in the connected state, and the 'after' disconnected state. In the connected state: Wireless LAN adapter Wireless Network Connection:........
View 8 Replies
View Related
Sep 26, 2009
I know there are several threads like this on the vista forums, but the postmaster recommended a new thread so i am kindly obliging. I have the same ****ty problem many before me have had. One peeerty day I turned on my Vista comp, and all of a sudden my wireless connection had stopped working. Limited or no connectivity was the message I got. So I fired up my notebook, running with XP - same thing. Limited or no connectivity. Only when I did diagnose problem on my XP it did precisely that. and the problem was gone............
View 9 Replies
View Related
Mar 23, 2008
I have 2 laptops that are running Vista and get this message numerious times. I also have 2 Windows XP pc's on the same network. Why do the Vista pc's keep having this issue. My Linksys wireless router is setup with no restictions so I can get this problem fixed.
View 9 Replies
View Related
Jul 23, 2008
I'm on Vista Ultimate x32. I connect to my internet wirelessly using a Linksys USB adapter. When I'm downloading something my internet stops working, downloads top and it says limited or no connectivity - so I have to disconnect from the network, unplug the USB Adapter and then re-plug it in and then it connects.
View 5 Replies
View Related
Mar 23, 2008
My Packard Bell EasyNote MX37-U-05 (Running Vista Home premium) was working fne on a wireless network through a BT Wireless home hub. It did automatic updates and since then has connection problem reporting "limited Connectivity" what does this mean and how can I cure this problem? It seems to be the same if I connect through the Wireless or direct on the hub Lan connection.
View 6 Replies
View Related
Mar 23, 2008
I m trying to resolve limited internet connectivity via ICS. My Vista 64bit Ultimate notebook connects directly to a wireless network, from which it gets internet connectivity. I can visit any webpage and see all network devices, so things seem to be working great on the server side.
My other computer, the ICS client, runs 32bit XP pro and is set up to connect to the internet through my notebook. Between the two PCs is a spare buffalo WHR-HP-G54. I can see all network devices, but it fails to connect to most websites. It will display Google and *some* pages from Time Warner Cable, but I cannot get to Wiki pages, my favorite forums, or download updates for anything on my desktop PC. Based on the status bar of my browser, which usually gets as far as "Transferring data from ", it seems the communication problem is limited to incoming streams........
View 8 Replies
View Related
Feb 20, 2009
Well basically last night my internet was running fine and when i woke up to turn it on i got Unidentifed Network - Limited Connectivity, I'm using my laptop's connection which is the same connection way as the other computer so i'm guessing there is somthing wrong with the desktop
View 9 Replies
View Related
Apr 16, 2008
About 3 days ago I was downloading a file when I noticed the download had stopped half-way through. Thinking the router had frozen I unplugged the router to reset it, as I have done a hundred times before with no problem. After restarting the router Vista (Home Premium 32-bit SP1) stopped recognizing my home network (wired) and I started receiving a "Limited Connectivity" message. When I go into the Network & Sharing screen I see "Unknown Network". When I boot this same computer into Ubuntu (7.10) I can access my network and the internet. I also have a small Ubuntu server and Xbox 360 that can access the network just fine. This is definitely a Vista issue. After trying many, many suggestions (Unplug router, Reset router, IP refresh,...) from around the internet with no success, I purchased a new PCI Ethernet card (Netgear GA311) just to rule out a possible hardware issue. I unistalled the onboard lan in Vista and disabled it in the BIOS then installed the new card. No Luck, Same Problem. My router is a Netgear FWG114P. I have had this network for over a year with no issues and now, out of the blue, nothing. I tried re-entering the IP, Subnet, Default Gateway and DNS addresses for the ethernet adapter, NO LUCK. I did notice a strange issue when I ran "Ipconfig /all" The default gateway was shown as "0.0.0.0". After re-entering the gateway address, the gateway was listed as "0.0.0.0" with my gateway address listed below.
View 9 Replies
View Related
Apr 7, 2008
I am one of the many users experiencing problems with wireless connections that work until your laptop goes into powersave mode, then only allow "Limited or No Connectivity" I have 2 wireless routers, a Linksys and ActionTec, supplied by Verizon with FiOS and Linksys has helped me a couple of times to make it work but that is all. Verizon is clueless. As am I since I have 4 XP laptops that all work. Vista is apparently trying to prevent me from hurting myself, and therefore I am unable to fix it.
View 7 Replies
View Related
Mar 23, 2008
After upgrading Vista Ultimate to SP1 two days ago, I noticed on the Taskbar that I'm getting a yellow Caution symbol on top of the Network Icon. My internet connection seems to be working correctly. I've tried resetting my Linksys router, removed and reinstalled Norton Internet Security 2008, upgraded my NIC drivers, (I'm using an ASUS P5K Deluxe motherboard with built-in networking.), tried the Network repair options, etc.
View 5 Replies
View Related
Sep 24, 2009
I'm facing problems with my internet connection in my vista. I'm trying to connect internet thro usb cable of my mobile as i've taken subscription of mobile connect. It used to work fine but now it shows as limited connectivity. In pc suite it shows as connected but cant connect to internet. I've tried all best possible options to check the connectivity.
View 5 Replies
View Related
Sep 5, 2009
Got a new laptop (VISTA) and already have a wireless router (netgear) in the house. We connected the laptop wirelessly with no problems yesterday and this morning. Then, out of the blue, I get a "limited connectivity" message even though the signal strength is excellent. Our wireless network is the only one that's listed "connect automatically" and we were connected to it yesterday and this morning with no problems.
View 7 Replies
View Related
Mar 23, 2008
I have 2 computers at home both running XP SP2. One plugs directly into my Netgear router and the other is wireless. I recently bought a laptop withe Vista Home Premium. I was able to connect to the network before, but I think I accident;y changed something. It is now showing my network as a public network. It continually says "Identifying. Public Network)" in the Network and Sharing Center. Access is Limited connectivity. Also I am NOT able to access the Customize link in the NaS Center like I was before.
View 5 Replies
View Related
Oct 12, 2008
I have a laptop running Vista Home Premium 32 bit. It's fairly new (~1 month) and has pretty much had this issue since day 1. If you leave the laptop idle for a "fairly long" period of time, it will lose connectivity to other machines on the local network. It will do it frequently overnight, but not always, so it's hard to pinpoint when/how long.
Here are the symptoms:
-Mapped drives still show up in explorer, but if you click on one, it hangs FOREVER. I have let it try to connect for several hours and it never gets through
-Using UNC gives the same result
-I can still ping other machines on my local network
-I can still access the internet
-Disabling/enabling the network connection does not help
-Once the issue starts, Windows explorer can not be shut down. You can task-manager-> end process all day and it will not die.
-Once the issue starts, Windows can not be shut down. It will hang on the "logging off" screen for literally hours. The only way to recover from this is to do a hard power down by holding the power button for 10 seconds or so.
View 4 Replies
View Related
Jan 26, 2010
I have Vista Home Basic OS with AVG free. This past month a new icon appears in my bottom task bar without any warning or my specific command. It commences to connect to my Internet dialup provider. The PC sends about 15KB, receives about 30KB and then no acitivity. The connection does not disengage after a few minutes of preset inactivity as my standard connection does. Clicking on this icon does not help. It won't respond to a left or right click. The Task Manager shows nothing. How do I eliminate this program? My attachment has an enlarged snapshot of what the icon looks like.
View 9 Replies
View Related
Sep 3, 2009
I have a Dell Inspiron 1720 with Windows Vista
I'm trying to connect to some unsecure wireless networks at a friend's house for the first time and am only able to connect with local access.
I try diagnose and repair and it says that there are no issues. Three other computers are connecting to the internet just fine.
They signal is good, and there is supposedly data being sent and received but no programs will connect to the internet.
This issue has never happened before. I regularly run a registry cleaner and tried restoring to a backup from a couple days ago and that didn't help.
View 9 Replies
View Related
Sep 18, 2009
Recently built out of spare parts and some new parts a Media Center PC. Loaded Vista Ultimate X64 on the box and have it hard wired to my network. Issue is limited connection on my network and no internet connection. All was working great until SP1 was installed. Since then I can not access the internet, ping my router or see my WHS or my wifes XP Pro laptop, but I can see and access my daughters laptop running Vista Home Premium and my laptop running Windows 7 RC1.
I have tired to disable IPv6 both through the proprieties on my nick and through the registry, no effect. Tried netsh winsock reset, no effect, also when I go into network settings network discovery is turned off, I enable it with no effect, next reboot it is off again. I saw a post about putting local services group in the administrators group, no effect. I have a D-Link DI524 router my MC PC is showing up in the assigned IP tables, the IP that is returned when I do an ipconfig matches the one issued by the router. As I stated before I had NO network connection issues until SP1 was installed. Is my only option to un-install or remove SP1, is that even possible?
View 4 Replies
View Related
Sep 26, 2009
I have Vista home basic 32bit And I am connected to DSL via ethernet (wired).
About a week ago I stared having a issue that my browsers would stop working(both firefox and internet explorer)I would get the typical error saying the connection has been reset.My modem was showing that I am connected tho.
At the same time my AIM messenger was working fine I was still connected and able to send and receive messages.I tried to reset my modem that didn't work.So I restarted my pc and that seemed to fix it.
This has continued to happen daily now usually around the same timeframe too.
I have scanned my pc with avast,super anti spyware and malwarebytes and they haven't found anything wrong.I tried disabling my firewal (pc tools firewalls plus) that didn't work.I read that zonealarm could cause this issue and i had it in the past but it's been long uninstalled.
The last thing i tried was i disabled avast web scanner and i reset the TCP/IP Winsock. And again it didn't work.
View 9 Replies
View Related
Sep 9, 2009
I recently bought a new Linksys router ultra range plus. it can broadcast on n, g and b bands. My laptop has a "g" adapter. but after setting up the router i tried to connect to the router and only get "Local" connection. DHCP is enabled in my router but the "ipconfig /all" command on the laptop says it isnt. My room mates connect fine, one has a Mac and one has an HP running vista (not sure the version). When i connect via ethernet the internet works just fine. im leaning towards an adapter problem but im no pro in this field. iv updated the adapter drivers to the latest update (attempting to solve the problem).
View 5 Replies
View Related
Dec 9, 2009
I'm using Vista on a HP Pavilion laptop and i'm having some problems with my internet connection. I know very little about computers and so struggle to follow much of the advice on these forums! I'm trying to connect using an ethernet connection so it's not a problem with the wireless. The network and sharing centre shows that i'm connected to an unidentified local network but it isn't connecting through to the internet.
View 5 Replies
View Related
Jan 22, 2008
I've searched everywhere looking for the fix to the "Local Only" network problem. I've had it a couple days and can't find why I can't get through to the internet. I have disabled IPv6 and tried static ip which I don't think works with my router and some registry fixes and cmd commands. I'm connected through Ethernet wire so it's not a wireless thing. I don't know if I should switch back to XP Pro or maybe buy a new network card. .....The first is if I set my ip static and the second without it. It seems that if I don't set my ip static then it does not find the router and only finds unidentified network while if I set my ip static it does but I don't believe my router works with setting static ip from the computer. I can also see the other computers linked into my router but just can't access the internet making me believe it is something with the compatibility with the router and Vista. Okay here it is, this is all without IPv6.
STATIC IP:
C:UsersChris>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Chris-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No.............
View 4 Replies
View Related
Mar 31, 2008
I installed sp1 last night and this morning my internet was gone, the network controller on my machine couldn't find any connections, though the control panel insists the device and the driver are working correctly. I just uninstalled sp1 and got back my connection. I'd done the install hoping it would fix a problem that just started happening: Vista no longer recognizes software CD. Up until a few weeks ago, if I inserted a CD containing software (e.g. adobe CS2), the autoplay brought up the start menu. It not only no longer brings up the start menu, but when I click on the cd/dvd drive in explorer, it asks me how I want to format it. Nero's info tool reads and determines that the disc contains the software I want to install, but vista can't get to it. The only plus side of sp1 was that it correctly reports how much RAM I have installed, instead of 2.93 as it did prior to sp1. Any idea how to install software now that Vista no longer recognizes software media?
View 4 Replies
View Related
Apr 11, 2008
Whenever I do an ipconfig I get a bunch of connections that are not active. It lists my active connections, but then I get a whole series of these: Tunnel adapter Local Area Connection* 6:
Media State ....... . : Media disconnected Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 7:
Media State . . . .. : Media disconnected Connection-specific DNS Suffix . :
Connection-specific DNS Suffix . :
They don't seem to be causing any harm and the only downside is that I sometimes have to scroll around to find the connection that is active. What are these?
View 5 Replies
View Related
Mar 23, 2008
i used advanced vista optimiser to give my laptop a good clean out as i do every week. but this time when i went to log on the diagnostic comes and says either change proxy settings or try resetting local connection setting. i tried resetting many a time which as done no good. web address bar states where its going but the diag box comes on again.so in the mean time while this is all going on a new tab keeps on opening by its self and saying the same thing,this started to happen before i cleaned my l.p but it was just redirecting to a blank page.
that is why i did the clean.anyhow resetting the lan did not work so i reset the internet expolorer in the tools on the bar. which as worked but the same thing is still happening with the tab ,but now its redirecting to all the freebiee sites and it will not stop. i have spyware-adware-trojan software on my l.p and still no good it did pick up 3 infections which it sorted out, its driving me f*&^%*ng nuts:mad::mad:
View 7 Replies
View Related
Mar 23, 2008
I started to have problems with Local Area Connection in Vista, during logon there was two networks identified, one that I had set up and one unrecognized. This was a problem, because it disrupted the DHCP discovery. I have read here that many have the same problem, but so far haven't been able to pinpoint the cause. My solution was to try to disable the network connection and enable it. This seemed to work sometimes, but once I rebooted the machine, the whole network adapter had disappeared from device manager. I tried re-installing the driver but Vista doesn't seem to recognize it. How do I get Vista to install it back?
View 8 Replies
View Related
Oct 12, 2009
Task Scheduler (Local) Upon opening TS..a error box populates and no (Local) data. Upon Xing close the error box...data populates.. Message in error box..The Task Image is Corrupt or has been Tampered with.mcupdate...I ran sfc..nothing reported
View 9 Replies
View Related
Nov 6, 2009
Im the admin on my PC. There is a limited user account. I want to set permissions for certain folders such that they cannot 'cut' or 'delete' the files. Please help me with the settings. I have tried rightclick>>Security but i dont know to proceed further.
View 3 Replies
View Related
