Change Proxy Settings Or Try Resetting Local Connection Setting

Mar 23, 2008

i used advanced vista optimiser to give my laptop a good clean out as i do every week. but this time when i went to log on the diagnostic comes and says either change proxy settings or try resetting local connection setting. i tried resetting many a time which as done no good. web address bar states where its going but the diag box comes on again.so in the mean time while this is all going on a new tab keeps on opening by its self and saying the same thing,this started to happen before i cleaned my l.p but it was just redirecting to a blank page.

that is why i did the clean.anyhow resetting the lan did not work so i reset the internet expolorer in the tools on the bar. which as worked but the same thing is still happening with the tab ,but now its redirecting to all the freebiee sites and it will not stop. i have spyware-adware-trojan software on my l.p and still no good it did pick up 3 infections which it sorted out, its driving me f*&^%*ng nuts:mad::mad:

View 7 Replies


ADVERTISEMENT

Cannot Resetting The Local Cache Files

Mar 26, 2009

I've tried resetting the local cache files - no change. Can't see any options on WinMail to "ignore your own posts". Windows Mail is version 6.0.6000.16386 (vista_rtm.061101-2205)

View 7 Replies View Related

Resetting Settings To Default?

Nov 1, 2009

Resetting settings to default?

View 3 Replies View Related

Resetting C-drive Allocations To Default Setting In Vista

Jan 15, 2010

To prepare for a dual boot installation (Vista / Ubuntu) I had to allocate space on my C-drive using Vista's 'Disk Management' and 'Shrink Volume' features. Unfortunately, in the process of making the allocation, I mistakenly allocated 40 MB instead of 40 GB. Went back into 'Shrink Volume' to correct the allocation but it apparently cannot increase space. Also tried 'Extend Volume', no luck there either (or maybe I just don't understand how it works). For what it's worth, here's my current C-drive allocations.

144.81 GB NTFS
40.00 MB Unallocated (reserved for Ubuntu) (this is what should have been 40GB)
75.29 GB Primary Partition
3.24 GB Primary Partition
9.49 GB NTFS

I should also mention that I already have Ubuntu installed, so this is actually a re-installation to solve a connection problem I'm having with Ubuntu.

View 3 Replies View Related

General Question Re Resetting/renewing IP Connection

Jun 4, 2009

I have a general question re network settings under Vista Home Premium. On occasion, during busy times of the day, my cable modem will indicate that the connection is lost. If I manually unplug the power cable to the cable modem and router, wait until 15 or so seconds, and reconnect the cables, I can usually suceed in obtaining a connection. I assume the computer looks and finds a new address from my IP.

Under Vista, using cmd.exe (elevated), I tried ipconfig /renew but
received the following message - An error occured while renewing interface
Local Area Connection : unable to contact your DHCP server. Request has
timed out. [end quote]

View 9 Replies View Related

Security Settings In IE7: Reboot My Settings Change And I Have To Restore Them

May 6, 2008

I have a problem with the security settings in IE7. Everytime I reboot my settings change and I have to restore them. I have the settings set in custom level to allow programmatic clipboard access but it disables that and some other settings after a reboot. what I can do to make my settings stick?

View 9 Replies View Related

Recover Administrative Tools Default Services (local) Settings

Aug 24, 2009

Re: Vista Ultimate 64-bit I changed settings for several Services - disabling some - etc & made some trouble for myself.I did find some tech web pages that suggested how to edit/make large scale register changes - sounded risky.Can I return all the Vista/Administrative Tools/ Services back to their default settings - within Windows Vista - without having to reinstall or make other drastic choices? I do have backups but failed to note the dates of changes I made to the settings.

View 4 Replies View Related

Only Local Connection

Sep 3, 2009

I have a Dell Inspiron 1720 with Windows Vista
I'm trying to connect to some unsecure wireless networks at a friend's house for the first time and am only able to connect with local access.
I try diagnose and repair and it says that there are no issues. Three other computers are connecting to the internet just fine.
They signal is good, and there is supposedly data being sent and received but no programs will connect to the internet.
This issue has never happened before. I regularly run a registry cleaner and tried restoring to a backup from a couple days ago and that didn't help.

View 9 Replies View Related

Local Connection Only

Sep 18, 2009

Recently built out of spare parts and some new parts a Media Center PC. Loaded Vista Ultimate X64 on the box and have it hard wired to my network. Issue is limited connection on my network and no internet connection. All was working great until SP1 was installed. Since then I can not access the internet, ping my router or see my WHS or my wifes XP Pro laptop, but I can see and access my daughters laptop running Vista Home Premium and my laptop running Windows 7 RC1.

I have tired to disable IPv6 both through the proprieties on my nick and through the registry, no effect. Tried netsh winsock reset, no effect, also when I go into network settings network discovery is turned off, I enable it with no effect, next reboot it is off again. I saw a post about putting local services group in the administrators group, no effect. I have a D-Link DI524 router my MC PC is showing up in the assigned IP tables, the IP that is returned when I do an ipconfig matches the one issued by the router. As I stated before I had NO network connection issues until SP1 was installed. Is my only option to un-install or remove SP1, is that even possible?

View 4 Replies View Related

Setting Office Registry Settings

Aug 7, 2009

I have been making changes for Access 2003 and Access 2007 registry changes in XP OS to allow certain features to work for me. Will I be able to make the same type of registry changes in Vista?

View 5 Replies View Related

Internet Issue (local Connection )

Sep 26, 2009

I have Vista home basic 32bit And I am connected to DSL via ethernet (wired).
About a week ago I stared having a issue that my browsers would stop working(both firefox and internet explorer)I would get the typical error saying the connection has been reset.My modem was showing that I am connected tho.

At the same time my AIM messenger was working fine I was still connected and able to send and receive messages.I tried to reset my modem that didn't work.So I restarted my pc and that seemed to fix it.
This has continued to happen daily now usually around the same timeframe too.

I have scanned my pc with avast,super anti spyware and malwarebytes and they haven't found anything wrong.I tried disabling my firewal (pc tools firewalls plus) that didn't work.I read that zonealarm could cause this issue and i had it in the past but it's been long uninstalled.
The last thing i tried was i disabled avast web scanner and i reset the TCP/IP Winsock. And again it didn't work.

View 9 Replies View Related

Connect Router: Local Only Connection

Sep 9, 2009

I recently bought a new Linksys router ultra range plus. it can broadcast on n, g and b bands. My laptop has a "g" adapter. but after setting up the router i tried to connect to the router and only get "Local" connection. DHCP is enabled in my router but the "ipconfig /all" command on the laptop says it isnt. My room mates connect fine, one has a Mac and one has an HP running vista (not sure the version). When i connect via ethernet the internet works just fine. im leaning towards an adapter problem but im no pro in this field. iv updated the adapter drivers to the latest update (attempting to solve the problem).

View 5 Replies View Related

Local Area Connection Can Not Connect

Dec 9, 2009

I'm using Vista on a HP Pavilion laptop and i'm having some problems with my internet connection. I know very little about computers and so struggle to follow much of the advice on these forums! I'm trying to connect using an ethernet connection so it's not a problem with the wireless. The network and sharing centre shows that i'm connected to an unidentified local network but it isn't connecting through to the internet.

View 5 Replies View Related

Local Network Connection Can't Work

Jan 22, 2008

I've searched everywhere looking for the fix to the "Local Only" network problem. I've had it a couple days and can't find why I can't get through to the internet. I have disabled IPv6 and tried static ip which I don't think works with my router and some registry fixes and cmd commands. I'm connected through Ethernet wire so it's not a wireless thing. I don't know if I should switch back to XP Pro or maybe buy a new network card. .....The first is if I set my ip static and the second without it. It seems that if I don't set my ip static then it does not find the router and only finds unidentified network while if I set my ip static it does but I don't believe my router works with setting static ip from the computer. I can also see the other computers linked into my router but just can't access the internet making me believe it is something with the compatibility with the router and Vista. Okay here it is, this is all without IPv6.
STATIC IP:
C:UsersChris>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Chris-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No.............

View 4 Replies View Related

Sp1 Disabled Local Network Connection

Mar 31, 2008

I installed sp1 last night and this morning my internet was gone, the network controller on my machine couldn't find any connections, though the control panel insists the device and the driver are working correctly. I just uninstalled sp1 and got back my connection. I'd done the install hoping it would fix a problem that just started happening: Vista no longer recognizes software CD. Up until a few weeks ago, if I inserted a CD containing software (e.g. adobe CS2), the autoplay brought up the start menu. It not only no longer brings up the start menu, but when I click on the cd/dvd drive in explorer, it asks me how I want to format it. Nero's info tool reads and determines that the disc contains the software I want to install, but vista can't get to it. The only plus side of sp1 was that it correctly reports how much RAM I have installed, instead of 2.93 as it did prior to sp1. Any idea how to install software now that Vista no longer recognizes software media?

View 4 Replies View Related

No Connectivity On The Local Area Connection

Nov 19, 2009

I am the manager of my network at my house and i have set up my router with an encryption key i can remember. My mom just got a new laptop and we can not connect to it because i FORGOT THE KEY! My computer is wired directly to the router. I went to my IP address and wouldnt you know it, i forgot the login info! I can reset the router from the router itself, but it took me a while to set it up. Is there any way i can get around my login since i am directly connected?

View 6 Replies View Related

Tunnel Adapter Local Area Connection

Apr 11, 2008

Whenever I do an ipconfig I get a bunch of connections that are not active. It lists my active connections, but then I get a whole series of these: Tunnel adapter Local Area Connection* 6:

Media State ....... . : Media disconnected Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 7:
Media State . . . .. : Media disconnected Connection-specific DNS Suffix . :
Connection-specific DNS Suffix . :

They don't seem to be causing any harm and the only downside is that I sometimes have to scroll around to find the connection that is active. What are these?

View 5 Replies View Related

Local Area Connection In Vista:Network Adapter Disappeared

Mar 23, 2008

I started to have problems with Local Area Connection in Vista, during logon there was two networks identified, one that I had set up and one unrecognized. This was a problem, because it disrupted the DHCP discovery. I have read here that many have the same problem, but so far haven't been able to pinpoint the cause. My solution was to try to disable the network connection and enable it. This seemed to work sometimes, but once I rebooted the machine, the whole network adapter had disappeared from device manager. I tried re-installing the driver but Vista doesn't seem to recognize it. How do I get Vista to install it back?

View 8 Replies View Related

How Do I Change Dpi Settings

Dec 8, 2009

I have recently installed software called 'Tune Up Utilites 2010' and immediately found a vast improvement and one its recommendations was to increase resolution to 1680 x 1050. Having then done that in 'Display Properties' it then advises to 'Set dpi to 96'.

However, I cannot find how to make changes to dpi.

View 5 Replies View Related

Change The Setting IE 7

May 25, 2008

is there any way I change the settings in IE7, whenever it opens a new window, it is not maximized to the full screen size. I would ideally prefer all new windows to open as tabs in my current browser, and not as new pop up windows.

View 5 Replies View Related

TV And Change Graphic Settings

Apr 15, 2010

At first I had no problems for the last 4 months when I hooked up my new TV to my laptop. I didn't even change any graphic sttings. It worked great right out of the box. I am using a standard VGA-VGA cable. Last week I hooked up my laptop to an old CRT display to do our taxes. I had to play with the graphic settiings for the CRT monitor to look OK.

Now, when I hook up the TV to the laptop, it only has the middle part of the screen showing the desktop. I have played with the Graphic settings, but no matter what I do, I cannot get it to look like it did before with the wide screen.

View 5 Replies View Related

Can Change Setting Of Desktop

Jun 24, 2008

can i change a setting on both my desktop (Ultimate) and laptop (Premium) so that either can "wake" the other? I know i can set the network card to "wake on LAN", but i tried that and i believe the machine (desktop) never went to sleep because the card was always active since i'm on a cable modem that's always on (memory is a little fuzzy on that, its been a while). Basically, i want to be able to access and wake either machine that may be "sleeping" without physically going to that location to wiggle the mouse, as it were.

View 6 Replies View Related

How To Reset Or Change The Setting

Mar 22, 2008

I don't know what I clicked, but my vista settings changed and I no longer have the little previews when I hover over the buttons on my bottom bar thingy, and my windows are no longer semi-transparent. Does anyone know what to reset or change to get these things back?

View 5 Replies View Related

Windows Update, Change The Settings Nothing Happens

Jan 9, 2010

i'm having a problem with windows update. It's not an error of some kind, but it appears as if it is set on never cheking for updates and even when i change the settings nothing happens. and when i push "check for updates" it says that it's not possible to check for updates cause the service is not running.

View 5 Replies View Related

Office Settings Doesn't Allow To Change

Jun 30, 2008

after installing Encarta i windows Vista and trying to change the settings i word 2007, it goes to the default and doesn't allow me to change it...

View 8 Replies View Related

AVG Free 8 Conflicts: Change Settings

May 9, 2008

Today I downloaded the new free AVG. I have this and Spyware blaster and Super antispyware installed. I ran a scan with te AVG and it found Trojan's, adware, etc, or so it seemed. When the summary came up at the end a result of 0 (as in nothing found) came up in each categry, with about 214 in the warnings category, potential threats. Did the AVG somehow mistake the protection files for the.

The software on both mine and my dad's laptops is pretty identical, and the same result showed up on both. I wasn't sure what to do at the end. I haven't changed any settings and as I understand it all the threats were removed. At any rate I
ran the scan again and nothing was found.

View 5 Replies View Related

Windows Update: Cannot Use Or Change Settings

Mar 5, 2010

I cannot use or change the settings of Windows Update in any way. I've tried reinstalling the Windows Update Agent, but nothing changes. I have found no way of uninstalling it either. This alone is not the biggest problem, but the program has set itself to default and downloads hundreds of MB's of useless updates daily, which forces me to wait 30 minutes before the laptop turns on, and another 10 minutes of "reverting changes" because they "were not configured properly". Is there any way to fix this besides reformatting or reinstalling the OS? Install missing files? Somehow disable the agent? Uninstall it?

View 8 Replies View Related

Unable To Change Backup Settings

Mar 24, 2008

I am having problems backing up using Vista Home Premium. For some reason I am unable to change my backup settings to enable me to save to anything other than my "D" drive. Ideally I would like to save to the "C" on my PC but when trying to do so I get the following text. File backup could not save your automatic backup settings for the following reasons: Your backup configuration is not valid. Review your backup settings (0x81000029)

View 6 Replies View Related

Change Settings For Windows Explorer

May 18, 2009

I want to change the settings of Windows explorer to open in a specific folder. I can do this for the shortcut under Programs>Accessories> Windows Explorer. But doing so does not affect the settings of Windows Explorer when I invoke it with the keyboard shortcut : "Windows-Key + E"

View 5 Replies View Related

Change Internet Settings On Vista?

Sep 5, 2008

Can someone tell me how to change my internet settings on vista? It will not let me access internet settings from the control panel(don't know why). In the control panel all of the icons also have labels , but not the internet settings.

View 4 Replies View Related

Selecting Files And Change Setting

May 6, 2008

I recently upgraded from XP to Vista and for the most I really like the improvements. One thing that is annoying me is that if your folder view is details and you have your mouse set to select when you hover your cursor over a file it will select the file even if you hover over the size column or the type column etc. In XP it would only select if you hovered over the name of the file. Is there anyway to change this setting?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved