Connect Router: Local Only Connection
Sep 9, 2009
I recently bought a new Linksys router ultra range plus. it can broadcast on n, g and b bands. My laptop has a "g" adapter. but after setting up the router i tried to connect to the router and only get "Local" connection. DHCP is enabled in my router but the "ipconfig /all" command on the laptop says it isnt. My room mates connect fine, one has a Mac and one has an HP running vista (not sure the version). When i connect via ethernet the internet works just fine. im leaning towards an adapter problem but im no pro in this field. iv updated the adapter drivers to the latest update (attempting to solve the problem).
View 5 Replies
ADVERTISEMENT
Mar 23, 2010
I just moved into a new apartment where there is already wireless internet set up in my office. I don't actually want/need wireless so I'm trying to connect to the wireless router (Linksys WRT110) via ethernet cable, but am getting "local access only". The other two computers that are connected to this router are connected to the internet and thus are NOT having this problem.
-I can not connect directly to the modem because then everyone else loses their internet access.
-firewall is off.
-ping test doesn't work, I can't ping anything since I can't get online AT ALL.
-I know my cable works; if I connect it to the modem, I can get online.
-I know the router works, because everyone else can get online. I tried to get help from Linksys, but they want $30 for one-time help, which, IMO, is BS.
View 9 Replies
View Related
Dec 9, 2009
I'm using Vista on a HP Pavilion laptop and i'm having some problems with my internet connection. I know very little about computers and so struggle to follow much of the advice on these forums! I'm trying to connect using an ethernet connection so it's not a problem with the wireless. The network and sharing centre shows that i'm connected to an unidentified local network but it isn't connecting through to the internet.
View 5 Replies
View Related
May 27, 2009
last week virgin media installed TV, Phone and BB. since then, my sons desktop windows vista will not connect to the internet and has local only connection via a Belkin adapter. The adapter has found the router but will not connect. Previous supplier, tiscali. A friend has tried to change the IP address, and still nothing. We have tried to uninstall Norton security, but the machine seems to want to hold onto it, and will not fully uninstall. I have another desktop, which is plugged into the router and that works fine. My laptop which is also Windows Vista, has connected perfectly well. I am seriously pulling my hair out as what to do next. bearing in mind i can navigate a computer but not very technical.
View 4 Replies
View Related
Apr 9, 2008
here is the setup, I have a Laptop with a wired 10/100/100 jack and a wireless card built in A/B/G. I have a wireless router at home that does B/G, I connect to it at G. The wireless router also has 5 10/100 ports on the back. From the wireless router I go into a cable modem, pretty standard setup so far, here is where gets fun. I have the option of "bundling" my download speeds and upload speeds with the installation of a 2nd cable modem. What I am unsure opf is how exactle this setup would work. Going to attach a pic and see what you all have in the way of advice: Basically, the 2 connections from the cable modems are 15down and 2up each, my cable company will allow me to combine the connections (they will set it up on their end) so I have 30down 4up, what I dont know is how top do it on MY end. I am attaching a word doc with a drawing to explain better. I am running Vista64 Ultimate w/sp1
View 4 Replies
View Related
Mar 18, 2009
We have four computers One desktop and three notebooks. The desktop and two notebooks use XP Home Service Pack 3, the other notebook is two weeks old and has Vista Home Basic installed SP1. The desktop has a NIC and is connected to a Linksys WRT54GS wireless router connected to a Speed Stream 4100 DSL modem.
All three XP machines have no networking problems - only the Acer Aspire 5515 with Vista Home basic which has an Atheros AR5007EG wireless network adapter. The problems are 1)does not connect to the internet [local only], on powering up and 2)coming out of sleep mode or 3)drops the internet connection randomly.
I tried unchecking the QoS Packet Scheduler, the Internet Protocol Version 6, and both Link Layer Topology choices. OK, restart. Also tried CMD prompt: netsh Winsock reset. Neither of those seemed to solve the problem and the QoS Packet Scheduler, the Internet Protocol Version 6, and both Link Layer Topology check boxes are checked and back as they were.
View 9 Replies
View Related
Mar 25, 2009
I have a BIG problem with my wireless network. I have two PC, one with vista ultimate X64 sp1 and another with both the same vista version plus XP sp3 X86 installed. my wireless network is based on ASUS, one router (with vista support) and another WIFI adapter installed on my second PC and as you might guess my main PC is connected to the router via the standard cable. I using WPA2 with a 63 ASCII PSK and it just works well with my XP sp3 but simply when I log in to vista it can't connect to my router, Vista can find my WIFI singal and say that it has a Good-Excellent signal. I downloaded and installed the x64 version of driver for my WIFI Adapter from ASUS website and it seems it should work. I tried everything. checking password...make it shorter reading articles about netWORKING.
View 6 Replies
View Related
Dec 26, 2008
My family and i just got a new dell laptop with vista on it, but it will not connect to our home internet connection. We use a Linksys Wireless-G Broadband Router, Model WRT54G. I've tried various guides and searched high and low for an answer. When I try to connect to the network Linksys, It says
'Windows cannot connect to Linksys'.
Then, it says
"Make sure your computer is in range of "linksys" and that the network settings match the wireless router or access point settings"
All our other computers work fine with it, A laptop running XP, Our Home computer running XP, and even an iphone.
I'm not sure what that diagnostic is supposed to mean and I'm not familiar with vista at all.
View 9 Replies
View Related
Nov 29, 2008
I secured my network connection only to find out that my vista laptop couldnt connect to the wireless. it says "the setting saved on this computer for the network do not match the requirements of the network". My other MACs laptop could connect with no problems. my router: wrt54G the manual that i followed:Linksys Technical Troubleshooting Wizard v3 - Wireless Router Configuration - Security - WEP
View 5 Replies
View Related
Sep 18, 2009
I recently bought a new Dell Studio XPS 435 with Window Vista x64. I can't connect to the internet using my existing DIR-655 router. Have my old desktop (Win XP)still connected and two wireless laptops and they have no problem. I have spoken to Dell, my ISP and tried D-Link with no success. I have updated the driver for my network card, updated the firmware on the router and have changed cables as well. It will connect when I bypass the router and go direct to the modem but not through the router. It appears that the problem is with the router but have run out of things to try.
View 5 Replies
View Related
Jun 5, 2009
Without getting into a rant here, I need to find out if there is any other device that I can use to connect the Xbox 360 wirelessly to my network... I refuse to pay ONE HUNDRED GREENBACKS to Microsoft for a simple wireless adapter.
Connecting the 360 to the router via wired is NOT even an option I am willing to discuss, you will just have to trust me that it would be a royal PITA if I were to got that route. I found another post in the Media Center and I will be doing that once I can get this box to hook up wireless w/o the need to sell one of my kids to buy the adapter
View 6 Replies
View Related
Aug 3, 2009
how to get my Presario 700 Laptop connected to Wireless via my Netgear router. I recently had help from a NETGEAR agent that got me on. I thought I could remember how to get back on, but obviously I am forgetting something.
View 6 Replies
View Related
Feb 4, 2010
I am currently using a 64 bit vista home premium computer and I have a 32 bit router. I have a desktop and three other laptops that are connecting to the router perfectly, the fourth however isn't. It's a 32 bit router, so the fourth laptop which is my 64 bit vista won't connect or even pick up the wireless ping from the router. Is there a way to convert from a 64 bit to a 32 bit other then going out and buying a 32 bit computer?
View 4 Replies
View Related
Sep 3, 2009
I have a Dell Inspiron 1720 with Windows Vista
I'm trying to connect to some unsecure wireless networks at a friend's house for the first time and am only able to connect with local access.
I try diagnose and repair and it says that there are no issues. Three other computers are connecting to the internet just fine.
They signal is good, and there is supposedly data being sent and received but no programs will connect to the internet.
This issue has never happened before. I regularly run a registry cleaner and tried restoring to a backup from a couple days ago and that didn't help.
View 9 Replies
View Related
Sep 18, 2009
Recently built out of spare parts and some new parts a Media Center PC. Loaded Vista Ultimate X64 on the box and have it hard wired to my network. Issue is limited connection on my network and no internet connection. All was working great until SP1 was installed. Since then I can not access the internet, ping my router or see my WHS or my wifes XP Pro laptop, but I can see and access my daughters laptop running Vista Home Premium and my laptop running Windows 7 RC1.
I have tired to disable IPv6 both through the proprieties on my nick and through the registry, no effect. Tried netsh winsock reset, no effect, also when I go into network settings network discovery is turned off, I enable it with no effect, next reboot it is off again. I saw a post about putting local services group in the administrators group, no effect. I have a D-Link DI524 router my MC PC is showing up in the assigned IP tables, the IP that is returned when I do an ipconfig matches the one issued by the router. As I stated before I had NO network connection issues until SP1 was installed. Is my only option to un-install or remove SP1, is that even possible?
View 4 Replies
View Related
Apr 1, 2009
I have a Samsung Vista Home laptop that has connected to the internet without problem for over 2 years. It cannot connect now, either wirelessly or wired, but two other computers running XP can connect both wired and wireless. The connection shows as 'local access only'. I have tried so many things, and have come to a grinding halt
View 9 Replies
View Related
Mar 23, 2008
I am having problems getting a wireless internet connection for a friend who has just bought a new laptop with Windows Vista. He connects through a Netgear, wireless router however the network connection on the laptop shows as local connection ok however there is limited access due to no internet connection. The adapter has a router assigned IP address of 192.168.0.3. The gateway, DNS server and DHCP server address all show the 192.168.0.1. I have connected to the admin console on the router and the router has been assigned a public address and DNS address from the ISP (AOL ADSL).
I disabled encryption and mac authentication incase for some reason this would be causing it but its still the same. He has a desktop PC hard wired to the router and this connects without any problems. The IPConfig of the adapter is much the same as the wireless adapter on the laptop with exception of the IP address which is 192.168.0.2. I can get a connection to the internet if I hard wire the laptop however when connecting wireless it once again gets a local intranet connection but no internet. I can ping the local network and the gateway but nothing beyond the gateway.
I have done the usual things in the way of power cycling the router/modem and disabling/repairing network connections etc. I recall having the same problem around 2 months ago for another friend. They were using a cable modem with an Actiontec router. I did as I did above and even tried 2 different routers with no change. My XP laptop connects fine.
View 5 Replies
View Related
Dec 28, 2009
Just recently, I accidently ran 'rd /s /q c:'. You can imagine the chaos that insued. Anyways, I reformatted my computer. For some reason though, Vista won't recognize my router connection anymore. I have a LinksysWRT140EN router hooked up, but neither the Linksys installation CD or Vista will recognize the broadband connection.
View 8 Replies
View Related
Mar 15, 2009
I have the most basic of basic Netgear wireless routers (WGR614), yet I still can't set this dang thing up! I am trying to set up two computers that are literally side by side. I go through the set up, it acknowledges the internet connection, then it asks for the login/password for my connection. I don't have one via my provider ("Qwest) as I simply ran through their install disk and it's ready to roll, no sign in, etc.
I've read quite a bit about this, so I thought maybe it wasn't directed at my providers sign in, and instaed used the general sign in 'admin' and 'password' that work on virtually all Netgear units. No go. I also tried the login of '1234', which is used for older routers (which this is not), but that didn't work either. I am obviously using wires, as there is no need to go wireless. What am I doing wrong? All my wiring is correct.
View 6 Replies
View Related
Apr 19, 2009
identifing the sucured network both have the same make routers but if i try to connect to the sucured router out of about 20 trys i only get in 2 however i hav found a way around this i must first connect to the unsucured network once im in its ok then if i come out but leave com on then if i go into my room it gos into the sucured network fine infact instantly but if i turn my com off or even restart it i cant get back into it with out going into the other unsucured network first and if i restart my com some times my com dus not even pic up the wireless and when i go into the wireless functios i dont hav wireless when i do to get round this i had to trurn my com off and then switch back on and sometimes my wireless plays up wer it will just disconnect from the network on its own and also my fuctions buttons on my laptop failed to work last nite i had to restart my laptop. my brother came over with his laptop and was able to get into both networks with out a problem and both networks both have the same defalt gateway. ive had this problem now for free months but im upset for the fact that it is having this wireless problem its only now that my computer has stopped crashing alot too i just dont get what the problem is with my wireless and its identifing problem.
View 9 Replies
View Related
Jun 16, 2008
Have a wireless router and cable modem on computer 2 in one bedroom. Suddenly computer 1 in another bedroom cannot connect to to internet. Worked fine until one morning. No settings were changed. Laptop has no problems connecting. Internal network device shows as working properly. Network is there - available to choose and connect to with all green bars but attempts to connect and diagnose suggest "low wireless signal quality." All recommendations have been followed to connect but nothing has worked. Computer is less than 1 year old. Is it possible that an updated driver for the wireless adapter would help? I am going to humiliate myself and ask the stupidest question ever - the same day it quit working, some very large construction equipment was parked in an empty lot next door to us. Could this interfere with any signals?
View 6 Replies
View Related
Jan 10, 2009
HP TX1000 Laptop wouldn't auto connect to my wireless router (1 metre away). I remembered that on the bootup Wireless Assistant turned on Bluetooth but not Wireless. In the Network and Sharing Centre, "Manage Wireless Networks" isn't showing so I can't turn it on. In what may be a related issue, I can't get into Services - Vista says that either I don't have permission (I'm logged on as Administrator) or it can't find Windows/System32/Services.msc (which I can't see). I've done the obligiatory re-start and I've connected via cat5 but I need to resolve this
View 6 Replies
View Related
Jun 13, 2009
I just bought Windows Vista Home Basic to use on a MacBook, and created a partition using a program called BootCamp, which allows the use of Mac OS X as well as Windows XP or Vista. I installed Vista and was excited to use it but then I was unable to connect to the wireless router in my house. I'm not sure why, but the Mac OS X part of my computer is using the internet through the router, but the Windows Vista will not pick up the signal from the router. Does anyone have a similar problem or solution?
View 5 Replies
View Related
Jul 15, 2009
I bought a new laptop and it needed a password to connect. I didn't know the password and a site told me to reset my router. So I did this and now neither of my laptops can connect to it. What should I do?
View 4 Replies
View Related
Dec 27, 2008
I have Vista Home Premium (32-bit). I've had the same laptop/modem/DSL for over a year and everything worked fine, then about a week ago I started getting the local-access-only message and can no longer connect to the internet.
1) Taking my laptop to another wireless location - same error.
2) Trying an XP laptop on my home wireless - works just fine.
3) Rebooting in Safe Mode - still doesn't work.
4) Deleting the Network adapter drivers and letting windows reinstall - still doesn't work.
5) Going back to the latest windows update and uninstalling it - still doesn't work.
6) Disabling TCP/IPv6
View 8 Replies
View Related
Jul 29, 2009
Vista Home Premium SP1 - trying to connect Brother HL-2142 laser printer as a _local_ printer with USB cable connection. I have installed exactly as instructed in printer manual. When I go to print, file appears in print queue until it finally errors. When I look in Device Manager->Universal Serial Bus Controllers->USB Root Hub properties->Power tab, the description shows "Unknown USB Device". Not sure if this is what the problem is. If it is, why would the USB Device be unknown? Also in Device Manager->Other devices, I see the HL-2140 printer with a yellow key hole. Printer manual says using drivers and so on for HL-2140 is fine for the HL-2142. When I try to add the printer manually, I can't work out which is the USB port. Doesn't seem to be one. I've attached document with screen shot of existing ports to choose from....
View 4 Replies
View Related
Apr 8, 2009
I have purchased a new wireless adsl router Aztech dsl605ew. I tried to connect wifi with my vista dell laptop but message shown that: Windows cannot connect to xxx. I used my other xp laptop to connect and I'm able to connect to the internet via wifi.
View 5 Replies
View Related
Feb 18, 2009
I bought a Netgear wireless router today so I can hook up multiple computers in my home. Problem is that when I hook everything according to the -schematics it does not go as planned. I have a verizon dsl modem and before I hook up my router everything works (internet). But when I connect my router I cannot get a connection at all. Also after I disconnected the router and connect just the dsl modem the way it was before I cannot get a connection either. I tried reseting the dsl box and I unhooked all the phone cords and ethernet cords and restarted the computer and it is still a no go. I am so confused I cannot understand it.
View 6 Replies
View Related
May 16, 2008
I have one Vista PC that is being completely uncooperative.We have a bunch of computer connected through a router, some xp, acouple Vista.The best computer is an XP one, so I want to use it as a server for asmall upcoming LAN party. All computers can see and join the server for various games...all except this Asus Laptop with Vista!
I have firewalls shut off for the server computer and this laptop. I have the network on the laptop set to Private. On the laptop, I canactually see the XP computer. I can even open up and download shared files from it!
Regardless, I cannot see or manually connect to IP for any other server in the network (the XP or others...even the other Vista). This computer ust refuses. I have a LAN party scheduled for tomorrow and I'mfreaking out that some of the vista computers won't work.
View 9 Replies
View Related
Sep 26, 2009
I have Vista home basic 32bit And I am connected to DSL via ethernet (wired).
About a week ago I stared having a issue that my browsers would stop working(both firefox and internet explorer)I would get the typical error saying the connection has been reset.My modem was showing that I am connected tho.
At the same time my AIM messenger was working fine I was still connected and able to send and receive messages.I tried to reset my modem that didn't work.So I restarted my pc and that seemed to fix it.
This has continued to happen daily now usually around the same timeframe too.
I have scanned my pc with avast,super anti spyware and malwarebytes and they haven't found anything wrong.I tried disabling my firewal (pc tools firewalls plus) that didn't work.I read that zonealarm could cause this issue and i had it in the past but it's been long uninstalled.
The last thing i tried was i disabled avast web scanner and i reset the TCP/IP Winsock. And again it didn't work.
View 9 Replies
View Related
Jan 22, 2008
I've searched everywhere looking for the fix to the "Local Only" network problem. I've had it a couple days and can't find why I can't get through to the internet. I have disabled IPv6 and tried static ip which I don't think works with my router and some registry fixes and cmd commands. I'm connected through Ethernet wire so it's not a wireless thing. I don't know if I should switch back to XP Pro or maybe buy a new network card. .....The first is if I set my ip static and the second without it. It seems that if I don't set my ip static then it does not find the router and only finds unidentified network while if I set my ip static it does but I don't believe my router works with setting static ip from the computer. I can also see the other computers linked into my router but just can't access the internet making me believe it is something with the compatibility with the router and Vista. Okay here it is, this is all without IPv6.
STATIC IP:
C:UsersChris>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Chris-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No.............
View 4 Replies
View Related
