I secured my network connection only to find out that my vista laptop couldnt connect to the wireless. it says "the setting saved on this computer for the network do not match the requirements of the network". My other MACs laptop could connect with no problems. my router: wrt54G the manual that i followed:Linksys Technical Troubleshooting Wizard v3 - Wireless Router Configuration - Security - WEP
View 5 RepliesMy family and i just got a new dell laptop with vista on it, but it will not connect to our home internet connection. We use a Linksys Wireless-G Broadband Router, Model WRT54G. I've tried various guides and searched high and low for an answer. When I try to connect to the network Linksys, It says
'Windows cannot connect to Linksys'.
Then, it says
"Make sure your computer is in range of "linksys" and that the network settings match the wireless router or access point settings"
All our other computers work fine with it, A laptop running XP, Our Home computer running XP, and even an iphone.
I'm not sure what that diagnostic is supposed to mean and I'm not familiar with vista at all.
I just moved into a new apartment where there is already wireless internet set up in my office. I don't actually want/need wireless so I'm trying to connect to the wireless router (Linksys WRT110) via ethernet cable, but am getting "local access only". The other two computers that are connected to this router are connected to the internet and thus are NOT having this problem.
-I can not connect directly to the modem because then everyone else loses their internet access.
-firewall is off.
-ping test doesn't work, I can't ping anything since I can't get online AT ALL.
-I know my cable works; if I connect it to the modem, I can get online.
-I know the router works, because everyone else can get online. I tried to get help from Linksys, but they want $30 for one-time help, which, IMO, is BS.
i have a new vista hp laptop and itis not connecting to my older linksys router. i have other wireless computers in my house that work just find. but my laptop the only vista computer in my house will not connect. i can find my router though "Connect to a network" but every time it says failed due to a unknown reson. my father tied to connect to and he is a computer specails. and on websites it said its a problem with vista sso can someone work me around it.
View 5 Replies View RelatedIm running Vitsa home premium 32bit on the desktop and XP on the Laptop. My Internet is constently droping, and even when its there it wont let me through to the site im trying to get to about 99% of the time.
View 8 Replies View RelatedI have never run into this before. I have a dsl modem/gateway (actiontec) which i use to connect to the internet. when I connected a Linksys WRT54G v.4 router to my laptop thru RJ45, WITH wifi disabled on the router, I lose connectivity to the internet on the wifi connection.
I'm used to XP with independent connectoids. Looking at the properties on each connection, they appear to be correct. Has anyone run into this on Vista? I thought surely by disco'g the wifi on the Linksys Router it should just be a standard wired connection. both routers are setup for DHCP. Is that what's confusing Vista?
As things stand right now: PC 1 - Windows Vista Business. Firewall disabled. DHCP address from Linksys wired DSL router. PC 2 - Windows XP Pro. Firewall disabled. DHCP address from Linksys wired DSL router. Both machines are in the same workgroup.
The XP machine can ping the router, ping the Vista machine by IP address, access the internet, access file shares on the Vista machine
by ip address (\addressshare). It cannot ping the Vista machine by name. The Vista machine can ping the router and access the internet. It cannot ping the XP machine by name or address (request timed out).
Vista Ipconfig output:
-------------------------------------
Windows IP Configuration
Host Name . . . . . . . . . . . . : Dell1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No.......
I have forgotten the Username and Password for the Login ID... and it is not the default (Username: *blank* Password: admin). I have heard you can hold the reset button on the back of the wireless router but will this reset my wireless network? By that i mean... will i be able to connect with my laptop still through that wireless network or will i have to set it up again?
View 9 Replies View RelatedI have a loptop running XP and just build a home machine with VISTA Home Premium. I've tried and tried but I am missing something. Both computers will eventually "find" each other over my Linksys Router but neither can access the other. I get "the network path was not found" on my VISTA machine and "access denied..." on my XP. I've tried everything except ramming the two machines together to make one monster mess of machinery.
View 9 Replies View Relatedlast week virgin media installed TV, Phone and BB. since then, my sons desktop windows vista will not connect to the internet and has local only connection via a Belkin adapter. The adapter has found the router but will not connect. Previous supplier, tiscali. A friend has tried to change the IP address, and still nothing. We have tried to uninstall Norton security, but the machine seems to want to hold onto it, and will not fully uninstall. I have another desktop, which is plugged into the router and that works fine. My laptop which is also Windows Vista, has connected perfectly well. I am seriously pulling my hair out as what to do next. bearing in mind i can navigate a computer but not very technical.
View 4 Replies View RelatedI just purchased two new identical machines. I have a home LAN running W2k Server. (downgraded from a domain to a workgroup). One machine sees the server no problem. I can connect to drives and use the printer. One machine refuses to see the server. When I go Run and type in \ipaddress, it shows up. When I try to browse for it, it never shows up. Both machines on same LAN, same WORKGROUP. I've clicked everything I can find but the one machine just won't find the server. I'm baffled.
View 7 Replies View Relatedhere is the setup, I have a Laptop with a wired 10/100/100 jack and a wireless card built in A/B/G. I have a wireless router at home that does B/G, I connect to it at G. The wireless router also has 5 10/100 ports on the back. From the wireless router I go into a cable modem, pretty standard setup so far, here is where gets fun. I have the option of "bundling" my download speeds and upload speeds with the installation of a 2nd cable modem. What I am unsure opf is how exactle this setup would work. Going to attach a pic and see what you all have in the way of advice: Basically, the 2 connections from the cable modems are 15down and 2up each, my cable company will allow me to combine the connections (they will set it up on their end) so I have 30down 4up, what I dont know is how top do it on MY end. I am attaching a word doc with a drawing to explain better. I am running Vista64 Ultimate w/sp1
View 4 Replies View RelatedI have a BIG problem with my wireless network. I have two PC, one with vista ultimate X64 sp1 and another with both the same vista version plus XP sp3 X86 installed. my wireless network is based on ASUS, one router (with vista support) and another WIFI adapter installed on my second PC and as you might guess my main PC is connected to the router via the standard cable. I using WPA2 with a 63 ASCII PSK and it just works well with my XP sp3 but simply when I log in to vista it can't connect to my router, Vista can find my WIFI singal and say that it has a Good-Excellent signal. I downloaded and installed the x64 version of driver for my WIFI Adapter from ASUS website and it seems it should work. I tried everything. checking password...make it shorter reading articles about netWORKING.
View 6 Replies View RelatedI recently bought a new Linksys router ultra range plus. it can broadcast on n, g and b bands. My laptop has a "g" adapter. but after setting up the router i tried to connect to the router and only get "Local" connection. DHCP is enabled in my router but the "ipconfig /all" command on the laptop says it isnt. My room mates connect fine, one has a Mac and one has an HP running vista (not sure the version). When i connect via ethernet the internet works just fine. im leaning towards an adapter problem but im no pro in this field. iv updated the adapter drivers to the latest update (attempting to solve the problem).
View 5 Replies View RelatedI recently bought a new Dell Studio XPS 435 with Window Vista x64. I can't connect to the internet using my existing DIR-655 router. Have my old desktop (Win XP)still connected and two wireless laptops and they have no problem. I have spoken to Dell, my ISP and tried D-Link with no success. I have updated the driver for my network card, updated the firmware on the router and have changed cables as well. It will connect when I bypass the router and go direct to the modem but not through the router. It appears that the problem is with the router but have run out of things to try.
View 5 Replies View RelatedWithout getting into a rant here, I need to find out if there is any other device that I can use to connect the Xbox 360 wirelessly to my network... I refuse to pay ONE HUNDRED GREENBACKS to Microsoft for a simple wireless adapter.
Connecting the 360 to the router via wired is NOT even an option I am willing to discuss, you will just have to trust me that it would be a royal PITA if I were to got that route. I found another post in the Media Center and I will be doing that once I can get this box to hook up wireless w/o the need to sell one of my kids to buy the adapter
how to get my Presario 700 Laptop connected to Wireless via my Netgear router. I recently had help from a NETGEAR agent that got me on. I thought I could remember how to get back on, but obviously I am forgetting something.
View 6 Replies View RelatedI am currently using a 64 bit vista home premium computer and I have a 32 bit router. I have a desktop and three other laptops that are connecting to the router perfectly, the fourth however isn't. It's a 32 bit router, so the fourth laptop which is my 64 bit vista won't connect or even pick up the wireless ping from the router. Is there a way to convert from a 64 bit to a 32 bit other then going out and buying a 32 bit computer?
View 4 Replies View Relatedidentifing the sucured network both have the same make routers but if i try to connect to the sucured router out of about 20 trys i only get in 2 however i hav found a way around this i must first connect to the unsucured network once im in its ok then if i come out but leave com on then if i go into my room it gos into the sucured network fine infact instantly but if i turn my com off or even restart it i cant get back into it with out going into the other unsucured network first and if i restart my com some times my com dus not even pic up the wireless and when i go into the wireless functios i dont hav wireless when i do to get round this i had to trurn my com off and then switch back on and sometimes my wireless plays up wer it will just disconnect from the network on its own and also my fuctions buttons on my laptop failed to work last nite i had to restart my laptop. my brother came over with his laptop and was able to get into both networks with out a problem and both networks both have the same defalt gateway. ive had this problem now for free months but im upset for the fact that it is having this wireless problem its only now that my computer has stopped crashing alot too i just dont get what the problem is with my wireless and its identifing problem.
View 9 Replies View RelatedHave a wireless router and cable modem on computer 2 in one bedroom. Suddenly computer 1 in another bedroom cannot connect to to internet. Worked fine until one morning. No settings were changed. Laptop has no problems connecting. Internal network device shows as working properly. Network is there - available to choose and connect to with all green bars but attempts to connect and diagnose suggest "low wireless signal quality." All recommendations have been followed to connect but nothing has worked. Computer is less than 1 year old. Is it possible that an updated driver for the wireless adapter would help? I am going to humiliate myself and ask the stupidest question ever - the same day it quit working, some very large construction equipment was parked in an empty lot next door to us. Could this interfere with any signals?
View 6 Replies View RelatedHP TX1000 Laptop wouldn't auto connect to my wireless router (1 metre away). I remembered that on the bootup Wireless Assistant turned on Bluetooth but not Wireless. In the Network and Sharing Centre, "Manage Wireless Networks" isn't showing so I can't turn it on. In what may be a related issue, I can't get into Services - Vista says that either I don't have permission (I'm logged on as Administrator) or it can't find Windows/System32/Services.msc (which I can't see). I've done the obligiatory re-start and I've connected via cat5 but I need to resolve this
View 6 Replies View RelatedI just bought Windows Vista Home Basic to use on a MacBook, and created a partition using a program called BootCamp, which allows the use of Mac OS X as well as Windows XP or Vista. I installed Vista and was excited to use it but then I was unable to connect to the wireless router in my house. I'm not sure why, but the Mac OS X part of my computer is using the internet through the router, but the Windows Vista will not pick up the signal from the router. Does anyone have a similar problem or solution?
View 5 Replies View RelatedI bought a new laptop and it needed a password to connect. I didn't know the password and a site told me to reset my router. So I did this and now neither of my laptops can connect to it. What should I do?
View 4 Replies View RelatedI have purchased a new wireless adsl router Aztech dsl605ew. I tried to connect wifi with my vista dell laptop but message shown that: Windows cannot connect to xxx. I used my other xp laptop to connect and I'm able to connect to the internet via wifi.
View 5 Replies View RelatedI am trying to network both of my desktop computors with a Linksys router,both are windows vista,my new one is vista premium and the older one is vista basic, I run through all of the installation and setup steps required on both computors and no matter what I do I can only get one of them to access the internet at a time and they can't see each other.
View 5 Replies View RelatedI purchased WRT54G Linksys wirless adapter & WRT54G Linksys Router about 8-10 months ago. Router wired to my desktop pc running Windows XP & my wireless connection running Vista Basic on a desktop in another room..Everything has worked fine until about 3 days ago when I keep going in & out of internet connection on the wireless pc. Updated drivers from Linksys and was on the phone with them for 3 hrs. yesterday. They got my connection back up, but only for 15 mins. or so before losing my connection repeatedly. These are my current issues:
1. I have always had full signal streghth on the wireless pc.
2. I am connected to the network.
3. It says I'm connected to the internet but I can't surf the web.
4. Internet connection keeps turning on/off (Globe then no globe)
5. There are no issues at all with the pc with the router attached.
6. When diagnose and repair it says nothing wrong with my connection or sometimes check with my internet provider. (Internet on main pc working fine).
7. It's random but I have been able to browse a couple pages here & there, sometimes for a full hour.
8. Windows Update says there's been an update for my wireless adapter for months but I always get an Update Failed message. My pc has worked fine for all this time without it. There have been no changes to either pc. I don't know why I'm having issues now.
I have cable internet, that runs to a Linksys BFESR41 router, one hardwire goes out to the PC. One hardwire goes out to the internet connection for a Linksys WRT54G, which then provides the internet access for both laptops. Linksys tech support helped me get internet to all three computers. They had me do a MAC clone on the wired router and PC to get internet working on the PC. Then they had me hook the wireless router to the wired router via the wireless router internet "in" connection. I want to network all three computers so that I can access files on each computer, as well as share a printer that is connected to the PC. As of now I have internet on all three computers, but they do not "find/see" each other.
View 9 Replies View RelatedMy set-up is very simple yet I cannot connect to a device. I have a Router which has three connections via ethernet.
1. Vista Machine
2. XP Machine
3. Music Server (systemline)
The problem I have is that my Vista machine will not connect to the music server - I cannot see the shared folders. My XP machine connects to it no problem, e.g. if I enter the location (
I have a issue with my Linksys wireless USB adapter. I am trying to use it with Vista Home Premium. After installing software... I plug the adapter in (like directions say) and windows update goes to work. It updates the driver, installs correctly, I then connect to my home network and all is good. My prob is for some reason I lose internet and the USB adapter itself. One time I switched users and lost all. I have tried uninstalling adapter and tried reinstalling by pointing to my D drive (install CD) in hopes of using the driver that's on the installation CD. as soon as it saw everything.. windows update once again gave me the same buggy driver. I have tried to install with UAC disabled... no luck... the Linksys website/support for drivers has the same updated driver. I tried to use an older one but Windows keeps forcing this updated one down my
throat.
All had been working well until a few days ago. For some reason, now when I double-click a video file, I can hear the audio but I get no video. I must open WMP manually, and then I get the video of what I'm hearing. I used to double-click a video and it automatically opened WMP.
Then, to close WMP, I must stop the video first. Because if I don't, the audio will continue even though the video will not be seen. I then have to re-open the player, stop the video, then close WMP. I used to close the program (X on the WMP) and it would all (video and audio) close,
i recently downloaded got some ISO files from a friend and when i mounted them with daemon tools they contain nothing. I tried to burn it on CD but again it contains nothing (almost). Though the size is 3,5GB when i mount it on Daemon, the total files size is 124KB, (dont advice me to open hidden folders cause i tryied many things after doing this).
This also happened when my friend downloaded some warez stuff and he had the same problem. Though i tryied to stop him opening it with daemon tools due to virus risk, he did it and it had only some KB of file size.