Netgear Router Connection
Mar 15, 2009
I have the most basic of basic Netgear wireless routers (WGR614), yet I still can't set this dang thing up! I am trying to set up two computers that are literally side by side. I go through the set up, it acknowledges the internet connection, then it asks for the login/password for my connection. I don't have one via my provider ("Qwest) as I simply ran through their install disk and it's ready to roll, no sign in, etc.
I've read quite a bit about this, so I thought maybe it wasn't directed at my providers sign in, and instaed used the general sign in 'admin' and 'password' that work on virtually all Netgear units. No go. I also tried the login of '1234', which is used for older routers (which this is not), but that didn't work either. I am obviously using wires, as there is no need to go wireless. What am I doing wrong? All my wiring is correct.
View 6 Replies
ADVERTISEMENT
Feb 14, 2009
my netgear router dg834g will not portforward, i am new too this so its probably an easy mistake where i am going wrong.
ive tried following the insructions by finding my router on portforward.com and going through those steps, and it didnt seem too work so i started too look for more detailed guides on the internet.
i came across this Internet video Internet - port forwarding on the dg834g and did everything it said once id completed the steps i went too canyouseeme.org too test my port and it was closed.
error: i could not see your service on xx.x.xx.xx on port (43594)
reason: connection timed out that is what canyouseeme.org told me.
id also like too add i think my problem may lie with my laptop not being directly connected too the router, would this change any steps in the Internet video above?
View 2 Replies
View Related
Dec 2, 2008
I have had this router for some time - worked fine with Xp64 - now I've upgraded to Vista 64 Home, it will occasionally lock up. By that I mean that I can sometimes still see my local network, but I lose internect connectivity. I seems to be at random. But the impression I get is that it is something on the wireless network that is causing it as it seems to be worse if I connect my works laptop to the internet via a wireless VPN connection.
I also have a WB NAS drive connected (Soon to be ditched due to problems with it corrupting files and being extremely slow to extract data) and a Wii (Wireless). Or can any recommend a ADSL wireless router that works well with Vista? (I have to run the PC and NAS drive with static IP addresses due to the time it takes for the network to connect if I use DHCP)
View 6 Replies
View Related
Mar 23, 2008
I recently bought an hp laptop with windows vista and the wireless netgear router 614 v8. However the connection is always dropping, and usually won't connect after coming out of sleep, it can't be a problem with the router because there are other computers not vista that have no connection problems. Do i need to change any setting on my comp? restarting the router does nothing
View 8 Replies
View Related
Aug 3, 2009
how to get my Presario 700 Laptop connected to Wireless via my Netgear router. I recently had help from a NETGEAR agent that got me on. I thought I could remember how to get back on, but obviously I am forgetting something.
View 6 Replies
View Related
Mar 23, 2008
i have a netgear wireless router, one desktop pc connected to it with a Ethernet cable (still working fine) and a hp laptop running vista connected thought wireless everything was working fine until one day the wireless on the laptop just stopped working and gave the message connected with limited access i have disconnected from the network and tried to reconnect however all i get is connection unsuccessful then i go to diagnose the problem and have been given some suggestions by windows help i have checked my driver and they are all up to date i have also checked that both ipv4 and ipv6 protocols are ticked in the config for wireless networking, my adapter says working fine and i have checked that my WEP keys are still the same.
View 5 Replies
View Related
Aug 31, 2008
Have Netgear WGR614 v7 router,and Netgear WG111 wireless adapter. My PC is Vista 32bit, and my wifes's new one is Vista 64bit. Mine is direct and connection fine. My wife's PC connects but the connection is not steady and at times intermittent. I suspect I have purchase wrong hardware. The router was supplied by Time Warner, and their techs set it up. The have been back six times, and do not know what the answer is.
View 5 Replies
View Related
Mar 23, 2008
I am having problems getting a wireless internet connection for a friend who has just bought a new laptop with Windows Vista. He connects through a Netgear, wireless router however the network connection on the laptop shows as local connection ok however there is limited access due to no internet connection. The adapter has a router assigned IP address of 192.168.0.3. The gateway, DNS server and DHCP server address all show the 192.168.0.1. I have connected to the admin console on the router and the router has been assigned a public address and DNS address from the ISP (AOL ADSL).
I disabled encryption and mac authentication incase for some reason this would be causing it but its still the same. He has a desktop PC hard wired to the router and this connects without any problems. The IPConfig of the adapter is much the same as the wireless adapter on the laptop with exception of the IP address which is 192.168.0.2. I can get a connection to the internet if I hard wire the laptop however when connecting wireless it once again gets a local intranet connection but no internet. I can ping the local network and the gateway but nothing beyond the gateway.
I have done the usual things in the way of power cycling the router/modem and disabling/repairing network connections etc. I recall having the same problem around 2 months ago for another friend. They were using a cable modem with an Actiontec router. I did as I did above and even tried 2 different routers with no change. My XP laptop connects fine.
View 5 Replies
View Related
Dec 28, 2009
Just recently, I accidently ran 'rd /s /q c:'. You can imagine the chaos that insued. Anyways, I reformatted my computer. For some reason though, Vista won't recognize my router connection anymore. I have a LinksysWRT140EN router hooked up, but neither the Linksys installation CD or Vista will recognize the broadband connection.
View 8 Replies
View Related
Feb 18, 2009
I bought a Netgear wireless router today so I can hook up multiple computers in my home. Problem is that when I hook everything according to the -schematics it does not go as planned. I have a verizon dsl modem and before I hook up my router everything works (internet). But when I connect my router I cannot get a connection at all. Also after I disconnected the router and connect just the dsl modem the way it was before I cannot get a connection either. I tried reseting the dsl box and I unhooked all the phone cords and ethernet cords and restarted the computer and it is still a no go. I am so confused I cannot understand it.
View 6 Replies
View Related
Sep 9, 2009
I recently bought a new Linksys router ultra range plus. it can broadcast on n, g and b bands. My laptop has a "g" adapter. but after setting up the router i tried to connect to the router and only get "Local" connection. DHCP is enabled in my router but the "ipconfig /all" command on the laptop says it isnt. My room mates connect fine, one has a Mac and one has an HP running vista (not sure the version). When i connect via ethernet the internet works just fine. im leaning towards an adapter problem but im no pro in this field. iv updated the adapter drivers to the latest update (attempting to solve the problem).
View 5 Replies
View Related
Mar 23, 2008
My Home network setup consists of the following....
In one room. 1 x laptop running XP Home, connected to the internet via
a linksys wireless router, and modem.
In another room, I have this laptop, Acer Aspire, running Vista
Business, and has wireless.
When I connected up my router (given to me by a family member, no
software, just router, and mains adapter), and switched on my Acer
laptop in the other room, I was able to connect to my Linksys Router,
and gain access to the internet without any security whatsoever, no wep
key or anything.
Now i know most people with problems have issues with not being able to
connect to the internet because of a wep key lost or alike.
My issue is, i would like to add security to my network to stop other
people in my building gaining access, or using my connection without my
permission.
I can also connect my mobile phone to my home wireless network, and
again, no wep key is asked for, which is quite worrying.
View 9 Replies
View Related
Jul 28, 2008
As I've been enjoying Vista a LOT, I was looking in the Vista Tweaks section on Speedguide.net & found that MS Vista's new TCP IP stack has the ability to autotune broadband internet connections due to packet load and or router capabilities/defiencies (much like a "gamer" would be trying to do w/ proggies like TCP Optimizer) except that Vista can do this on the fly while you're surfing, playing MMOG's, etc. Speedguide noted that in Vista this is usually turned off by default but in Server 2008 this is turned on by default.
Now why would Redmond do that? I can understand why turning this on for server usage but I'm a big time online gamer & this ability caught my attention--do y'all know what it means to have a stable connection when you're in the middle of a big intense furball w/ a LOT of others trying to shoot you down? This kind of usage is very much like a server being pinged by LOTS of users trying to get their presentations, budgets, timesheets, projects, etc & IT checking the server as well because Joe can't get his presentation files to run off PowerPoint cause the server is too busy so they're in there checking for malicious "content" that may be using up needed resources....
So I went in & checked thru "elevated command prompt" & sure enough it was turned off. So I just went in & enabled it & set all up according to Speedguide's recommendations to see what Autotuning would do....All I can tell you is this:If you do a lot of online gaming you will WANT this on!Check it out at SpeedGuide.net :: Broadband · Cable · DSL · VoIP · Security · Network Tools I posted this here as I couldn't find any references to this tidbit here in this forum. Now if you just only surf the 'net & online shopping & such I really wouldn't bother w/ this as Vista's TCP IP stack in default configuration is more than enough.Hence why I posted this in the Gaming section.
View 7 Replies
View Related
Oct 26, 2008
My friends computer uses a Netgear router and his computer runs on XP to which I try to connect for internet access. When his computer is turned OFF, I can access the internet no problem. However, when his computer is ON, I can not connect!!
-Vista 64 bit, service pack 1 and is completely up-to-date
-All hardware drivers are up todate with no hardware problems
-DLink has good reception with 1.20 driver (D-Link WMA 510)
-Router computer is XP, up-to-date drivers. Computer uses Netgear router
why my wireless connection drops when the computer with the Router is turned on?
View 7 Replies
View Related
Mar 26, 2008
So I have my desktop hooked up to the WN121T, which is a USB wireless adapter, and my relationship with the thing is love/hate. Sometimes it's fine. But a lot of the time, it just cannot find my network, despite the fact that other computers can get on the network. And I doubt it's a range thing, since when my desktop is online, the signal is pretty good. I have the latest drivers installed, and my router is a Netgear WNR834B.
View 4 Replies
View Related
Jun 5, 2009
I have Windows Vista Ultimate 64-bit and a NetGear WG311v3 wireless card installed into a PCI slot.
Whenever I start up Windows and browse the Internet, the connection seems just fine.
However, after an undetermined amount of time (or perhaps triggered by a certain amount of data I've downloaded), the connection cuts off. I then look in Device Manager and see the yellow warning symbol next to my wireless driver. When I look further, it says "This device cannot start (code 10)". Nothing I do seems to work, except restarting my computer. ANd when I do, I have to manually connect to the wireless network again.
There is no password on the router, and all the other desktops and laptops in the house connect to the router just fine without any connection problems after any amount of time or data.
I have tried re-installing the drivers (even by uninstalling, shutting down, removing hardware, booting up, installing drivers, shutting down, re-inserting hardware, booting up) but it still does the same thing.
There may be a conflict somewhere with other hardware, but I cannot for the life of me figure out what it may be. I have even tried installing the Marvell chipset driver instead of the NetGear driver, but it still does the same time-out problem.
I can stay connected for hours if I don't do any heavy downloading (just surfing and reading), but once I start downloading large files, the connection drops and I have to reboot again, which is a huge pain because the files I download can be quite large and I have to start from the beginning after I reboot.
View 9 Replies
View Related
Dec 11, 2009
I have forgotten the Username and Password for the Login ID... and it is not the default (Username: *blank* Password: admin). I have heard you can hold the reset button on the back of the wireless router but will this reset my wireless network? By that i mean... will i be able to connect with my laptop still through that wireless network or will i have to set it up again?
View 9 Replies
View Related
May 20, 2009
my computer is not holding it's internet connection, even when i refresh it just wont reconnect and i end up having to restart and then the connection is fine. I'm running Vista Home Premium, Defender, ZoneAlarm (free) and Avast (free). Broadband connection. is there anyway to secure the connection permanently (which it should be) Have i, a setting wrong? At all times my internet icon says i am fully connected?
View 9 Replies
View Related
May 15, 2009
I am having the worst problems connecting using a cable connection, which I need because as I am in Europe at the moment, many sites or private homes are not equipped with wireless. Now, when I connect with cable, everything seems to be working fine, the Toshiba connectivity doctor tells me I am connected, the diagnose program assures me that the problem has been resolved etc. etc. and yet whenever I try to connect (IE, Mozilla, Google, I have tried them all), I get an error screen. I have tried everything I could think of, checking my settings etc. Nothing works.
Let me emphasize that:
1) wireless connection works fine
2) it is a problem with my computer, not the host, since I have encountered
the same problem everywhere (libraries with password protected access,
private homes without password protected access etc.).
View 9 Replies
View Related
May 2, 2010
I have a strange problem. I have AOL broadband and I'd like to connect to the internet without using the infamous bloated AOL software. I know how to do that using Vistas' "set up connection or network" wizard and I can successfully log in using by username and password. The problem is the connection is very poor when I use this method. The speed tests show the correct speed and downloads are full speed but pages seemingly randomly do not load (for long stretches of several minutes). For example my home page does not load ("page cannot load" error), google does not load, some pages load but not fully with many errors.
This isnt a browser issue (I tried firefox, IE, chrome), this isn't a modem/router issue (I have a laptop that works fine with a permanently logged in router), it's not an AOL issue I can still log in fine with AOL software and then browse fine with firefox, it's not a hardware issue, and it's not a firewall issue (it's off). Therefore it must be an issue with the way windows connects to my modem when using the built in PPPoE broadband connection. I really have no idea what could be wrong. Maybe one of you do?
View 5 Replies
View Related
Mar 24, 2008
With Vista, I can get internet for my new Dell XPS laptop over the wireless connection without doing anything other than selecting the connection. No user name or password is needed. But to plug in directly into my cable modem, it does not work. Seems to require user name and password. But I use Verizon and a Motorola SB5101 modem and while it is broadband, I did not think it is pppoe. I don't even know of any user name or password for my account. Am I wrong, is all broadband pppoe? My internet connection works just fine without asking for pppoe login info when I use my desktop with Windows XP. So, it seems to Vista specific problem.
View 6 Replies
View Related
Jun 18, 2008
I just installed Vista x64 and found it failed to connect to my home network. Diagnostic indicates the Vista is failing to get IP from the router. This did not happen when I installed Vista x86 or XP x86, x64. Other machine running these OSes have no connection problem. What could be wrong with the Vista x64?
View 9 Replies
View Related
Feb 12, 2010
Ref. Windows Vista. I have noticed that when viewing Network that my router displays its type and most of the password. I'd like to remove the password information from the icon information. File - Rename is greyed.
View 9 Replies
View Related
Mar 27, 2009
3 PC's (Windows XP Home, Windows XP Pro and Vista Home Premium The two XP's work flawlwssly with simple file sharing and printer sharing - the Vista has a problem. All I care about having work, for now, is simple file sharing with no user restrictions and printer sharing.All Workgroups are the same. The two XP's use Zone Alarm The Vista uses the built-in Microsoft firewall Some login Usernames are different on the three machines. The router is a Linksys WRT160N
Situation: The XP's are fine. The Vista shows the networking map OK (I think). The reason I say I think is that, under the router icon is a switch icon. I have no switch that I know of. At least the Vista machine recognizes that there are three machines in the network. Internet works fine on all three machines. However, in Explorer, under Network, on the Vista machine, only the Vista machine shows up with its' shared folders.
View 4 Replies
View Related
Mar 28, 2009
how do i get my router showing in my network folder ive turned network discovery
View 5 Replies
View Related
May 4, 2008
Well i know i viewed my belkin routers settings before in Vx64 via the IExplorer. But i cant remember how... and i think it requires a firmware update.
View 5 Replies
View Related
Jun 1, 2008
I have a laptop running Windows XP SP3 and a desktop running Windows Vista SP1. After connecting them to access internet through a router, they both work well. However, when I want to share files between them, despite proceeding all the steps outlined in the following link, the desktop still cannot see the laptop yet the laptop can see and access the desktop shared folders.
View 5 Replies
View Related
Sep 28, 2009
I updated my home PC today from XP Pro to Vista 64 Bit Business. I was provided the software by my employer and purchased a brand new HD to install it on. Install went fine. I installed Vista 64 Business on a new HD today and changed nothing else as above. I cannot connect to the Internet at all through my router. When I bypass the router and plug in directly, I can connect without issues. This (for obvious reasons) will not work.
View 6 Replies
View Related
Mar 23, 2008
i have a windows xp pc witch i connected to my router then router to my cable modem on my vista laptop it says local only is there away i can fix this?
View 5 Replies
View Related
May 27, 2009
last week virgin media installed TV, Phone and BB. since then, my sons desktop windows vista will not connect to the internet and has local only connection via a Belkin adapter. The adapter has found the router but will not connect. Previous supplier, tiscali. A friend has tried to change the IP address, and still nothing. We have tried to uninstall Norton security, but the machine seems to want to hold onto it, and will not fully uninstall. I have another desktop, which is plugged into the router and that works fine. My laptop which is also Windows Vista, has connected perfectly well. I am seriously pulling my hair out as what to do next. bearing in mind i can navigate a computer but not very technical.
View 4 Replies
View Related
Mar 23, 2008
I posted this message to forum sometime back have been using Vista home edition on a Toshiba laptop for almost 6 months now without any issues when suddenly since last couple of weeks I am having networking problems. Suddenly in the middle of work the connection would be lost. I am using wireless adapter. So I investigated the issue but could not find anything conclusive. When this happens I am unable to ping my router. Initially I suspected my cable modem / router but that is fine beceuase I have another laptop that works fine when this happens.
I now suspect that it is to do with a problem for which a hotfix is available. Unfortunatley when I filled out the form I received an email from MS support that the hotfix is not available!!! Not sure where to go from here. Why write a KB article with a dangling carrot when it leads to a dead end :-)
View 4 Replies
View Related
