Netgear Router No Port Forwading
Feb 14, 2009
my netgear router dg834g will not portforward, i am new too this so its probably an easy mistake where i am going wrong.
ive tried following the insructions by finding my router on portforward.com and going through those steps, and it didnt seem too work so i started too look for more detailed guides on the internet.
i came across this Internet video Internet - port forwarding on the dg834g and did everything it said once id completed the steps i went too canyouseeme.org too test my port and it was closed.
error: i could not see your service on xx.x.xx.xx on port (43594)
reason: connection timed out that is what canyouseeme.org told me.
id also like too add i think my problem may lie with my laptop not being directly connected too the router, would this change any steps in the Internet video above?
View 2 Replies
ADVERTISEMENT
Mar 15, 2009
I have the most basic of basic Netgear wireless routers (WGR614), yet I still can't set this dang thing up! I am trying to set up two computers that are literally side by side. I go through the set up, it acknowledges the internet connection, then it asks for the login/password for my connection. I don't have one via my provider ("Qwest) as I simply ran through their install disk and it's ready to roll, no sign in, etc.
I've read quite a bit about this, so I thought maybe it wasn't directed at my providers sign in, and instaed used the general sign in 'admin' and 'password' that work on virtually all Netgear units. No go. I also tried the login of '1234', which is used for older routers (which this is not), but that didn't work either. I am obviously using wires, as there is no need to go wireless. What am I doing wrong? All my wiring is correct.
View 6 Replies
View Related
Dec 2, 2008
I have had this router for some time - worked fine with Xp64 - now I've upgraded to Vista 64 Home, it will occasionally lock up. By that I mean that I can sometimes still see my local network, but I lose internect connectivity. I seems to be at random. But the impression I get is that it is something on the wireless network that is causing it as it seems to be worse if I connect my works laptop to the internet via a wireless VPN connection.
I also have a WB NAS drive connected (Soon to be ditched due to problems with it corrupting files and being extremely slow to extract data) and a Wii (Wireless). Or can any recommend a ADSL wireless router that works well with Vista? (I have to run the PC and NAS drive with static IP addresses due to the time it takes for the network to connect if I use DHCP)
View 6 Replies
View Related
Mar 23, 2008
I recently bought an hp laptop with windows vista and the wireless netgear router 614 v8. However the connection is always dropping, and usually won't connect after coming out of sleep, it can't be a problem with the router because there are other computers not vista that have no connection problems. Do i need to change any setting on my comp? restarting the router does nothing
View 8 Replies
View Related
Aug 3, 2009
how to get my Presario 700 Laptop connected to Wireless via my Netgear router. I recently had help from a NETGEAR agent that got me on. I thought I could remember how to get back on, but obviously I am forgetting something.
View 6 Replies
View Related
Mar 23, 2008
i have a netgear wireless router, one desktop pc connected to it with a Ethernet cable (still working fine) and a hp laptop running vista connected thought wireless everything was working fine until one day the wireless on the laptop just stopped working and gave the message connected with limited access i have disconnected from the network and tried to reconnect however all i get is connection unsuccessful then i go to diagnose the problem and have been given some suggestions by windows help i have checked my driver and they are all up to date i have also checked that both ipv4 and ipv6 protocols are ticked in the config for wireless networking, my adapter says working fine and i have checked that my WEP keys are still the same.
View 5 Replies
View Related
Aug 31, 2008
Have Netgear WGR614 v7 router,and Netgear WG111 wireless adapter. My PC is Vista 32bit, and my wifes's new one is Vista 64bit. Mine is direct and connection fine. My wife's PC connects but the connection is not steady and at times intermittent. I suspect I have purchase wrong hardware. The router was supplied by Time Warner, and their techs set it up. The have been back six times, and do not know what the answer is.
View 5 Replies
View Related
Apr 25, 2008
I have evga motherboard with built in Realtek HD audio (ALC883). Board features 2 ports for digital audio (optical and coaxial). and according to manual both are output. However when installed vista drivers one of the ports has been chosen as digital output (optical) and another as digital input (coax) (i can see that when i hover the mouse over the jacks in "Realtek HD audio manager") Is there any way to make the coaxial port as an output port instead of optical? My my HT reciver has no free optical ports so i have to use coax to get some sound from the computer.
View 9 Replies
View Related
Apr 25, 2008
I use a AT&T exspress aircard and can't send mail out through windows mail on Vista. Do I need to change my outgoing mail port from 25 to another port number? If so what port or how do I obtain that info?
View 9 Replies
View Related
Mar 26, 2008
So I have my desktop hooked up to the WN121T, which is a USB wireless adapter, and my relationship with the thing is love/hate. Sometimes it's fine. But a lot of the time, it just cannot find my network, despite the fact that other computers can get on the network. And I doubt it's a range thing, since when my desktop is online, the signal is pretty good. I have the latest drivers installed, and my router is a Netgear WNR834B.
View 4 Replies
View Related
Jun 5, 2009
I have Windows Vista Ultimate 64-bit and a NetGear WG311v3 wireless card installed into a PCI slot.
Whenever I start up Windows and browse the Internet, the connection seems just fine.
However, after an undetermined amount of time (or perhaps triggered by a certain amount of data I've downloaded), the connection cuts off. I then look in Device Manager and see the yellow warning symbol next to my wireless driver. When I look further, it says "This device cannot start (code 10)". Nothing I do seems to work, except restarting my computer. ANd when I do, I have to manually connect to the wireless network again.
There is no password on the router, and all the other desktops and laptops in the house connect to the router just fine without any connection problems after any amount of time or data.
I have tried re-installing the drivers (even by uninstalling, shutting down, removing hardware, booting up, installing drivers, shutting down, re-inserting hardware, booting up) but it still does the same thing.
There may be a conflict somewhere with other hardware, but I cannot for the life of me figure out what it may be. I have even tried installing the Marvell chipset driver instead of the NetGear driver, but it still does the same time-out problem.
I can stay connected for hours if I don't do any heavy downloading (just surfing and reading), but once I start downloading large files, the connection drops and I have to reboot again, which is a huge pain because the files I download can be quite large and I have to start from the beginning after I reboot.
View 9 Replies
View Related
Dec 11, 2009
I have forgotten the Username and Password for the Login ID... and it is not the default (Username: *blank* Password: admin). I have heard you can hold the reset button on the back of the wireless router but will this reset my wireless network? By that i mean... will i be able to connect with my laptop still through that wireless network or will i have to set it up again?
View 9 Replies
View Related
Apr 25, 2010
my son retuned home this weekend with his HP Compaq CQ61 Notebook and told me his dongles, Itouch and stuff dont work? told me his mum had it at a shop and the guy did a restore and couldn't find the problem or fix it? I wonder what kind off shop it was? so i took a look and looks like someone has try'd to put something or FORCE something into USB port? i'v uploaded a pic from silly phone sorry about Quality but u can see that the port on the right is broken? AKA Wont work now the port on the left looks ok, so i try'd to hook up ex HD, Iphone and nothing works ? no power to device and PnP dont find anything new ?
i checked Device Manager and states that Drivers are ok and up to date? so the right one is gone and needs replaced i thought the left one would still work but seems not to ? should it?
View 9 Replies
View Related
Dec 28, 2008
I just bought the XFX GeForce 8400 GS from Amazon. I noticed that there is no DVI or VGA port it said DMS-59 on it, what is that and can I run DVI on it? Amazon.com: XFX PVT86SWML4 GeForce 8400GS 256MB GDDR2 DMS-59 Dual DVI Low Profile Monitor Solution PCI Express x16 Video Card: Electronics
View 5 Replies
View Related
Apr 10, 2009
My Son's computer was working yesterday and this morning he can't surf using IE 8 or Firefox. It appears Port 80 is being blocked. I have disabled the firewall temporarily and this did not resolve the issue. I did the "netsh winsock reset" and this did not fix the problem. I have reset my router with no change. I am able to ping the DNS, the Default router and his IP address within the command window. I can also ping yahoo.com, google.com within the command window, but can't reach them with either browser. He did not have System Restore enabled, so I can't use that as a solution. Can the group recommend some options for me to try? He is using Vista Home Premium, and a wireless card. I can also see ALL GREEN when I open up the Network Sharing tool. There is a green line between his IP and the Wireless Card and green line between the Wireless Card and the Internet.
View 9 Replies
View Related
Mar 4, 2009
I am trying to run Apache @ port 80 on Vista Ultimate, and it won't start. When I run a netstat -ab, I get the follow:....
View 5 Replies
View Related
Oct 9, 2009
Pretty strange that I couldn't find one google result about WHERE a USB 2.0 port is, everything is "how do I know I have USB 2.0" and not actually where they are on the computer. Some may say well, just plug in a USB 2.0 usb and see what happens.
However my USB Drive has ALWAYS been saying I'm plugging it in in a port that does not support USB 2.0. I've done this at my college and the same bs occurs. This does not occur for any of my USB drives, not even my 16G one. Should also mention that whenever I try to access the USB drive, it says "Drive E not formatted, would you like to format it now?" Obviously I click no. This by the way has nothing to do with my recent virus issues. This particular USB drive has been like this for years now.-
View 8 Replies
View Related
Jun 11, 2009
in vista, I found that once I deleted the WSD printer icon, in the server property, the WSD port stays here, and I can't delete it, I should reboot my PC for deleting it, So I want to know why it's locked, and if I want handle this WSD port, how can I do it?
View 7 Replies
View Related
Mar 27, 2008
I am curious about the change to port 587. After upgrading to Vista SP1, using Windows Mail, I had the same problem as a few on this board, but only with my roadrunner service. I could receive mails. However, I could send e-mails that were very short (read one or two lines), but anything of any length and I got the usual message of server connection unexpectly closed. I turned off my antivirus program completely and still got the message and could not send e-mails of any basic length. However, I did try the suggestion in a previous thread of changing the smtp port to 587 (even though it appeared to be a comcast network) and, so far, it appears to solve my problem with roadrunner (knock on wood).
View 4 Replies
View Related
Apr 18, 2009
I had Apache server installed on Vista Home Premium and it worked fine until the Vista security update 2 days ago. Something is blocking port 80. I ran netstat -ano and find out it is PID 4 which is System is using port 80, but I have no idea which one just added with the update to stop the service.
View 4 Replies
View Related
Oct 23, 2009
I am using windows XP and i want to disable the usb port (i dont want it to detect flash memories or external storage devices) but at the same time i want it to detect the usb printer, so i cant totally disable the usb port ...
View 4 Replies
View Related
Jan 31, 2010
i miss the old audio manger when it pop's up a balloon asking you what that port will be. i need to change my computer rear line in to headphones or speakers.
View 9 Replies
View Related
Apr 12, 2010
parallel port driver service failed to start due to the following error:
The service cannot be started either because it ia disabled or it has no enabled devices associated with it.
View 9 Replies
View Related
Mar 4, 2009
Vista Home Premium SP1. Is it possible to use more than one device in a single USB port? The reason I ask is that I have five USB ports, four at the back and one at the front. As the one at the front is more accessible, I use this for a Joystick I occasionally use. Can I also use this same port for another device, in this case an MP3 player, not at same time?
View 7 Replies
View Related
Mar 23, 2008
I'm asking the right question ...I have an older application (circa 2002) that connects to a VHF radio thru a serial or USB cable. The software only has provisions for communicating with the radio thru COM's 1 thru 4. Is there some way to emulate or dedicate a COM port thru a USB connection?
View 7 Replies
View Related
Feb 10, 2009
I have an Acer laptop with Vista Home and want to get an MPV film clip on it, from a brief segment of a talk show on my Tivo. I have a Dazzle plugged into a USB port, and have installed drivers that device manager shows to be working correctly. "Help" says I can use USB as a source, but I cannot find a way.
View 8 Replies
View Related
Jun 2, 2008
(running Vista Home Premium) I seem to have lost my COM1 port (and all other COM / LPT ports with it). I use Palm T5 and need the COM1 port for synching this device. The Palm cradle is plugged into a USB connection straight into the computer (not the USB hub ports). But I get the error "The selected port, COM1, is not available at this time. Hotsynch manager will open the port when it become available."
I dont have any modems etc running, and when I look in Device manager, there is no line like "Communication ports", COM and Printer ports or something like it. Curiously, I have my old HP Laser jet 4 running smoothly - so there must be some printer port somewhere.
View 6 Replies
View Related
Mar 23, 2008
I login remotely to 3 servers, and if I choose 5 clients. I have full administrator rights. Suddenly, I am not able to remote into Client 01( Windows Vista). Our MS Pro says someone or something has blocked or locked :3389 and he does not know how to either rebuild it or fix it. The client, is a fairly new Dual Core Vista Machine and I was logging into it just fine, until...A major Software program was installed, and certain permissions were accessed (I do not know which ones). Then it blocked me. It is locked or blocked. We can't seem to find the one thing we need to get it back. The permissions pertained to multiple users ,using the same program on our application Server. No one, including the MS Pro would have purposely shut that port down. What I am looking at from my out of town side is: A BRICK. It Says: Connectiveity to the Remote Computer could not be established. Ensure that the remote computer is on and connected to the Small Business Server network.
View 6 Replies
View Related
May 7, 2007
Have a web site (portal if you will) that i log into to get files etc from the office..it uses NT Challeng response for authentication once you hit the URL. Under XP it brings up the user id and password which lets me in..Vista on the other hand alos brings up the login dialog but just never gets authenticated. I suspect it's Vista given XP and IE7 works...anyone any thoughts? I've removed all firewalls etc to see what happens without them but to no avail...
View 4 Replies
View Related
Dec 2, 2009
I got this message when i tried to view any website. I looked for a solution all over the internet. I tried everything suggested and nothing worked so I just started messing around. Here is what finaly fixed it. Click Tools, internet options, connections, LAN settings, uncheck use a proxy server for you LAN
View 0 Replies
View Related
Nov 12, 2009
I have some old hardware with an RS232 (9 pin) connection to my notebook. I have downloaded a driver for the Serial to USB converter, and my Vista Enterprise OS seems happy with it. However, the hardware only allows communication with COM ports 1 to 4, and as far as I can judge my USB ports are 8, 9 and 10. Can I renumber these ports to make communication possible, or is there another way of doing this?
View 5 Replies
View Related
