, XP And Router Don't Work
Mar 27, 2009
3 PC's (Windows XP Home, Windows XP Pro and Vista Home Premium The two XP's work flawlwssly with simple file sharing and printer sharing - the Vista has a problem. All I care about having work, for now, is simple file sharing with no user restrictions and printer sharing.All Workgroups are the same. The two XP's use Zone Alarm The Vista uses the built-in Microsoft firewall Some login Usernames are different on the three machines. The router is a Linksys WRT160N
Situation: The XP's are fine. The Vista shows the networking map OK (I think). The reason I say I think is that, under the router icon is a switch icon. I have no switch that I know of. At least the Vista machine recognizes that there are three machines in the network. Internet works fine on all three machines. However, in Explorer, under Network, on the Vista machine, only the Vista machine shows up with its' shared folders.
View 4 Replies
ADVERTISEMENT
Feb 18, 2009
I bought a Netgear wireless router today so I can hook up multiple computers in my home. Problem is that when I hook everything according to the -schematics it does not go as planned. I have a verizon dsl modem and before I hook up my router everything works (internet). But when I connect my router I cannot get a connection at all. Also after I disconnected the router and connect just the dsl modem the way it was before I cannot get a connection either. I tried reseting the dsl box and I unhooked all the phone cords and ethernet cords and restarted the computer and it is still a no go. I am so confused I cannot understand it.
View 6 Replies
View Related
Mar 2, 2010
Have high speed internet. Have a 3gbsdram. And I have a router that is a g. Would I benefit as far as computer speed on the net with a router that is an n router. Also even though the computer says 802.11 a/g/n wireless I still would have to buy the the adapter that goes into the notebook? I know nothing about routers and the fact we have a g router it doesn't have an adapter needed for the computer to work. Was wondering if that is the same case with a wireless n router?
View 7 Replies
View Related
Dec 11, 2009
I have forgotten the Username and Password for the Login ID... and it is not the default (Username: *blank* Password: admin). I have heard you can hold the reset button on the back of the wireless router but will this reset my wireless network? By that i mean... will i be able to connect with my laptop still through that wireless network or will i have to set it up again?
View 9 Replies
View Related
Jun 18, 2008
I just installed Vista x64 and found it failed to connect to my home network. Diagnostic indicates the Vista is failing to get IP from the router. This did not happen when I installed Vista x86 or XP x86, x64. Other machine running these OSes have no connection problem. What could be wrong with the Vista x64?
View 9 Replies
View Related
Feb 12, 2010
Ref. Windows Vista. I have noticed that when viewing Network that my router displays its type and most of the password. I'd like to remove the password information from the icon information. File - Rename is greyed.
View 9 Replies
View Related
Mar 28, 2009
how do i get my router showing in my network folder ive turned network discovery
View 5 Replies
View Related
May 4, 2008
Well i know i viewed my belkin routers settings before in Vx64 via the IExplorer. But i cant remember how... and i think it requires a firmware update.
View 5 Replies
View Related
Jun 1, 2008
I have a laptop running Windows XP SP3 and a desktop running Windows Vista SP1. After connecting them to access internet through a router, they both work well. However, when I want to share files between them, despite proceeding all the steps outlined in the following link, the desktop still cannot see the laptop yet the laptop can see and access the desktop shared folders.
View 5 Replies
View Related
Sep 28, 2009
I updated my home PC today from XP Pro to Vista 64 Bit Business. I was provided the software by my employer and purchased a brand new HD to install it on. Install went fine. I installed Vista 64 Business on a new HD today and changed nothing else as above. I cannot connect to the Internet at all through my router. When I bypass the router and plug in directly, I can connect without issues. This (for obvious reasons) will not work.
View 6 Replies
View Related
Mar 23, 2008
i have a windows xp pc witch i connected to my router then router to my cable modem on my vista laptop it says local only is there away i can fix this?
View 5 Replies
View Related
May 27, 2009
last week virgin media installed TV, Phone and BB. since then, my sons desktop windows vista will not connect to the internet and has local only connection via a Belkin adapter. The adapter has found the router but will not connect. Previous supplier, tiscali. A friend has tried to change the IP address, and still nothing. We have tried to uninstall Norton security, but the machine seems to want to hold onto it, and will not fully uninstall. I have another desktop, which is plugged into the router and that works fine. My laptop which is also Windows Vista, has connected perfectly well. I am seriously pulling my hair out as what to do next. bearing in mind i can navigate a computer but not very technical.
View 4 Replies
View Related
Mar 23, 2008
I posted this message to forum sometime back have been using Vista home edition on a Toshiba laptop for almost 6 months now without any issues when suddenly since last couple of weeks I am having networking problems. Suddenly in the middle of work the connection would be lost. I am using wireless adapter. So I investigated the issue but could not find anything conclusive. When this happens I am unable to ping my router. Initially I suspected my cable modem / router but that is fine beceuase I have another laptop that works fine when this happens.
I now suspect that it is to do with a problem for which a hotfix is available. Unfortunatley when I filled out the form I received an email from MS support that the hotfix is not available!!! Not sure where to go from here. Why write a KB article with a dangling carrot when it leads to a dead end :-)
View 4 Replies
View Related
Mar 23, 2008
We are using Netgear Router in most offices in Northern California offices. Most are Net gear router modele MR814 & WGR614, 4 wired ports and 1 wireless port; and WG311 wireless adapters. Is there anyway to monitor the router activity? Anyway to see which port (wired and wireless) is active and network traffic. Also, want to make sure nobody outside our approved users is using the wireless ports? We know about the router log in the router set up page (from all ports, all mixed), howing what URL is contacted and time stamped.
View 9 Replies
View Related
Aug 12, 2008
Ok, my friend asked me a few days ago to help him fix his router. Its a Belkin N1.
It keeps knocking of at random times every few minutes. I have tried everything I know to solve the problem but nothing seems to work. He can connect to his neighbours internet and it stays connected but when he connects to his own it goes offline after a few mins.
View 9 Replies
View Related
Mar 23, 2008
how a router can be incompatible with Vista? Surely a router is platform independant as it is merley directing network traffic?
View 9 Replies
View Related
Mar 23, 2008
I live in a congested area. On one glorious morning my fiddling around with the wifi card allowed me to discover that I was able to access a 54g Wifi (lynksys) Internet connection. My experience with high speed was null so you could imagine my delight. Prior to this I was using "Netzero" which is like being homeless. My Question is- How can I look up the physical Router address that is providing me access? Its important to me because I could be sniped off easily for many reasons and to share the cost with a good neighbor is the moral thing to do. One exception is, if it???s the Hotel near-by.
View 9 Replies
View Related
Mar 23, 2008
I am having problems getting a wireless internet connection for a friend who has just bought a new laptop with Windows Vista. He connects through a Netgear, wireless router however the network connection on the laptop shows as local connection ok however there is limited access due to no internet connection. The adapter has a router assigned IP address of 192.168.0.3. The gateway, DNS server and DHCP server address all show the 192.168.0.1. I have connected to the admin console on the router and the router has been assigned a public address and DNS address from the ISP (AOL ADSL).
I disabled encryption and mac authentication incase for some reason this would be causing it but its still the same. He has a desktop PC hard wired to the router and this connects without any problems. The IPConfig of the adapter is much the same as the wireless adapter on the laptop with exception of the IP address which is 192.168.0.2. I can get a connection to the internet if I hard wire the laptop however when connecting wireless it once again gets a local intranet connection but no internet. I can ping the local network and the gateway but nothing beyond the gateway.
I have done the usual things in the way of power cycling the router/modem and disabling/repairing network connections etc. I recall having the same problem around 2 months ago for another friend. They were using a cable modem with an Actiontec router. I did as I did above and even tried 2 different routers with no change. My XP laptop connects fine.
View 5 Replies
View Related
Mar 23, 2008
Got a new laptop and trying to get it wireless with a belkin router, when i go to network and sharing i can see the wireless icon there but it is not conneted. how do i do this? Tried everything and i am about to crack up. Friend reckons you must be conected with wires on one computer before you can connect wireless for other computers (laptops). I only got one laptop which i want wireless is this ok.
View 5 Replies
View Related
Apr 14, 2008
trying to configure the network settings by adding a second static IP address, so that it can see with the other pc's in the network. The network infrastructure is set up as the following: there is a DSL router in bridge mode, so all pc's connected to the network have a direct connection to the internet, and get their ip address from the ISP's DHCP server. Also the other pc's (with XP and linux) have a secondary IP address set up e.g. 192.168.1.10 so they can access a NAS also hooked up to the network, but not connected to the internet.
View 7 Replies
View Related
Dec 28, 2009
Just recently, I accidently ran 'rd /s /q c:'. You can imagine the chaos that insued. Anyways, I reformatted my computer. For some reason though, Vista won't recognize my router connection anymore. I have a LinksysWRT140EN router hooked up, but neither the Linksys installation CD or Vista will recognize the broadband connection.
View 8 Replies
View Related
Dec 23, 2008
No networking. Nothing. Can not ping router, dns, other IP's, etc. The whole reason I upgraded to Vista Home Premium 64 was so that I can use the now 4+ gigs of ram I have (for some virtualization stuff I do) and mess with DirectX 10.
Anyway, vista installed flawlessly. The only only device that didn't install in the device manager was the ACPI (or whatever it's called) from the motherboard. For 2 whole days I have tried to get online using either of those network card. I have tried the following:..........
View 6 Replies
View Related
Mar 15, 2009
I have the most basic of basic Netgear wireless routers (WGR614), yet I still can't set this dang thing up! I am trying to set up two computers that are literally side by side. I go through the set up, it acknowledges the internet connection, then it asks for the login/password for my connection. I don't have one via my provider ("Qwest) as I simply ran through their install disk and it's ready to roll, no sign in, etc.
I've read quite a bit about this, so I thought maybe it wasn't directed at my providers sign in, and instaed used the general sign in 'admin' and 'password' that work on virtually all Netgear units. No go. I also tried the login of '1234', which is used for older routers (which this is not), but that didn't work either. I am obviously using wires, as there is no need to go wireless. What am I doing wrong? All my wiring is correct.
View 6 Replies
View Related
Jul 2, 2008
I recently got a sony vaio laptop installed vista and my wireless router will not work. I had no problems using it when I had my previous laptop, a HP with windows XP. When i try to connect to the router I am trying to install I get a message saying the computer cannot find any connection and to try again, I can assure I have done all the steps correctly. I also tried to connect to other wireless connections in my area as a test because i can't i get a message saying cannot connect. (and I have checked that the WLAN is on everytime).
View 5 Replies
View Related
Mar 23, 2008
I have a Belkin wireless-N router. I have 3 computers hardwired, and 3 computers that are wireless with a passphase. My new Vista computer is finding my network, but when I ask to connect I receive an "Enter Credetials" window asking for a User name, Password, and Logon Domain. Never saw this with XP. What do I need to enter, or what do I need to do to bypass this window?!
View 8 Replies
View Related
Sep 22, 2009
I am considering upgrading to a new wireless router soon. I just want to know what would be the best router to buy... I obviously want as much transfer rate as I can get for the price.
View 6 Replies
View Related
Aug 17, 2009
I just was wondering what is a "proxy"? Im using wireless router can I use a proxy? Why do people use proxy? Can there be consequences with using it? Were can I find a proxy?
View 8 Replies
View Related
Mar 27, 2009
I have a Wireless router connected to cable internet and I have 2 vista computers connected to the internet through it. I have WEP key on it.I need to share files between those 2 PCs and remote Desktop. How can it be done? I would also like to make it in a secure way so that no one can hack into my PCs via the Wifi Router.
View 4 Replies
View Related
Apr 9, 2008
here is the setup, I have a Laptop with a wired 10/100/100 jack and a wireless card built in A/B/G. I have a wireless router at home that does B/G, I connect to it at G. The wireless router also has 5 10/100 ports on the back. From the wireless router I go into a cable modem, pretty standard setup so far, here is where gets fun. I have the option of "bundling" my download speeds and upload speeds with the installation of a 2nd cable modem. What I am unsure opf is how exactle this setup would work. Going to attach a pic and see what you all have in the way of advice: Basically, the 2 connections from the cable modems are 15down and 2up each, my cable company will allow me to combine the connections (they will set it up on their end) so I have 30down 4up, what I dont know is how top do it on MY end. I am attaching a word doc with a drawing to explain better. I am running Vista64 Ultimate w/sp1
View 4 Replies
View Related
Feb 14, 2009
my netgear router dg834g will not portforward, i am new too this so its probably an easy mistake where i am going wrong.
ive tried following the insructions by finding my router on portforward.com and going through those steps, and it didnt seem too work so i started too look for more detailed guides on the internet.
i came across this Internet video Internet - port forwarding on the dg834g and did everything it said once id completed the steps i went too canyouseeme.org too test my port and it was closed.
error: i could not see your service on xx.x.xx.xx on port (43594)
reason: connection timed out that is what canyouseeme.org told me.
id also like too add i think my problem may lie with my laptop not being directly connected too the router, would this change any steps in the Internet video above?
View 2 Replies
View Related
Sep 26, 2009
we have a netgear wireless router and vista is NOT recognizing it! i've called netgear and they've said that the problem is w/ dell and these dell idiots wanna charge me $200! so i figured i would ask here
View 9 Replies
View Related
