i'm having a problem with windows update. It's not an error of some kind, but it appears as if it is set on never cheking for updates and even when i change the settings nothing happens. and when i push "check for updates" it says that it's not possible to check for updates cause the service is not running.
View 5 RepliesI cannot use or change the settings of Windows Update in any way. I've tried reinstalling the Windows Update Agent, but nothing changes. I have found no way of uninstalling it either. This alone is not the biggest problem, but the program has set itself to default and downloads hundreds of MB's of useless updates daily, which forces me to wait 30 minutes before the laptop turns on, and another 10 minutes of "reverting changes" because they "were not configured properly". Is there any way to fix this besides reformatting or reinstalling the OS? Install missing files? Somehow disable the agent? Uninstall it?
i'm logged in as an administrator yet i can't change the settings in automatic update. i can see the settings but they are greyed and "locked". Has anyone seen this issue? It may have been there all along i just never cared to change the settings until the pending SP1 release. i want to be there when it happens instead of the default setting of 3am!
View 6 Replies View RelatedI want to change the settings of Windows explorer to open in a specific folder. I can do this for the shortcut under Programs>Accessories> Windows Explorer. But doing so does not affect the settings of Windows Explorer when I invoke it with the keyboard shortcut : "Windows-Key + E"
View 5 Replies View RelatedI have a problem with the security settings in IE7. Everytime I reboot my settings change and I have to restore them. I have the settings set in custom level to allow programmatic clipboard access but it disables that and some other settings after a reboot. what I can do to make my settings stick?
View 9 Replies View RelatedThe Info Pane does not change/update the File Properties i.e. Tags, Ratings under Details? Also how to open Details Pane (Cntl + I does not work either)?
View 6 Replies View RelatedI have recently installed software called 'Tune Up Utilites 2010' and immediately found a vast improvement and one its recommendations was to increase resolution to 1680 x 1050. Having then done that in 'Display Properties' it then advises to 'Set dpi to 96'.
However, I cannot find how to make changes to dpi.
At first I had no problems for the last 4 months when I hooked up my new TV to my laptop. I didn't even change any graphic sttings. It worked great right out of the box. I am using a standard VGA-VGA cable. Last week I hooked up my laptop to an old CRT display to do our taxes. I had to play with the graphic settiings for the CRT monitor to look OK.
Now, when I hook up the TV to the laptop, it only has the middle part of the screen showing the desktop. I have played with the Graphic settings, but no matter what I do, I cannot get it to look like it did before with the wide screen.
after installing Encarta i windows Vista and trying to change the settings i word 2007, it goes to the default and doesn't allow me to change it...
View 8 Replies View RelatedToday I downloaded the new free AVG. I have this and Spyware blaster and Super antispyware installed. I ran a scan with te AVG and it found Trojan's, adware, etc, or so it seemed. When the summary came up at the end a result of 0 (as in nothing found) came up in each categry, with about 214 in the warnings category, potential threats. Did the AVG somehow mistake the protection files for the.
The software on both mine and my dad's laptops is pretty identical, and the same result showed up on both. I wasn't sure what to do at the end. I haven't changed any settings and as I understand it all the threats were removed. At any rate I
ran the scan again and nothing was found.
I am having problems backing up using Vista Home Premium. For some reason I am unable to change my backup settings to enable me to save to anything other than my "D" drive. Ideally I would like to save to the "C" on my PC but when trying to do so I get the following text. File backup could not save your automatic backup settings for the following reasons: Your backup configuration is not valid. Review your backup settings (0x81000029)
View 6 Replies View RelatedCan someone tell me how to change my internet settings on vista? It will not let me access internet settings from the control panel(don't know why). In the control panel all of the icons also have labels , but not the internet settings.
View 4 Replies View RelatedI'm logged in as Administrator. I go into "Date and Time," select the tab "Internet Time," and then hit the button "Change settings..." And I get the error message "You do not have permission to perform this task. Please contact your computer administrator for help." But *I* am the administrator of this computer! I'm logged in as Administrator!
View 9 Replies View RelatedI'm using a USB tuner (Avermedia Volar x). It is compatible with Vista x64 (I'm using Ult). The tuner works fine, the tuner program works in Vista x64, channels are tuned in, and I can watch TV. However, I've just noticed, that if I leave power options on balanced (the default), the audio is fine. But, if I change it to power saver, the audio (when I watch TV on the tuner) goes out of sync. I tried changing USB settings to disabled (under advanced power settings (under power saver), no change the audio is still out of sync.
View 4 Replies View RelatedI have been using my Windows Mail account now for over a year. I have not changed any settings. I have Norton antivirus and I have not changed any of it's settings.
View 8 Replies View RelatedI want it to default sort by name and not size and I want it that way for all folders I open. I find that some apps use the windows protocol and it is annoying having to change it there too. I was able to do it in XP and 2000 but it is not as intuitive in Vista.I want it to sort by name and I would like some other view tabs instead of what's displayed. I know how to do that by adding sort (tabs) by right clicking but how do I make it universal and how do I make it stay that way?
View 6 Replies View RelatedWhen ever I change any settings from stock to OC and reboot or cold start my computer starts for about 3-4 seconds then reboots and most of the time posts on up and runs normal. Every now and then it will reboot a 3rd time but then goes back to stock settings and continues posting. I never get a bsod (bios F2), all power saving options disabled in bios, PCI-E at 100, memory timings loose. Once it posts it runs perfectly. I tried all kinds of different memory timings, goosed the cpu vid to 1.3, raised mch by .1 and fsb volts by .1 in an effort to find out why this posting phenomenon occurs. No matter what I have tried, when I OC this posting regimen occurs. I play Supreme Commander Forged alliance alot and no issues the game just rocks with all the goodies at max and 60fps with fraps. Any smoking grey matter out there with a clue?
View 9 Replies View Relatedi used advanced vista optimiser to give my laptop a good clean out as i do every week. but this time when i went to log on the diagnostic comes and says either change proxy settings or try resetting local connection setting. i tried resetting many a time which as done no good. web address bar states where its going but the diag box comes on again.so in the mean time while this is all going on a new tab keeps on opening by its self and saying the same thing,this started to happen before i cleaned my l.p but it was just redirecting to a blank page.
that is why i did the clean.anyhow resetting the lan did not work so i reset the internet expolorer in the tools on the bar. which as worked but the same thing is still happening with the tab ,but now its redirecting to all the freebiee sites and it will not stop. i have spyware-adware-trojan software on my l.p and still no good it did pick up 3 infections which it sorted out, its driving me f*&^%*ng nuts:mad::mad:
I have MS Vista Basic Home Edition with service pack 1 and all updates current up to 6-1-2008 (there are today 6-4-2008 two updates waiting to be installed, but now I am afraid to install them due to the following problem). I have MS Office Home and Student 2007. My computer is a PowerSpec 32-bit with 2 GB of RAM and my monitor is an Acer 17? All of this was purchased about four months ago.
On 6-1-2008, when I turned on my computer I was notified of two MS updates (I do not use automatic updating), and installed them:
* Update for Windows Vista (KB947562)
* Definition Update for Windows Defender - KB915597 (Definition 1.33.9770.6)
My computer installed and then automatically shut down and re-started........
When I got started moving/ downloading files I had to change my UAC (user account control) settings lower, or remove them all together. Will this have an adverse effect to my lap top? Note: I don't have the site up yet.
View 9 Replies View RelatedIn the information on computer clock syncronization with an internet time server I read: "Your clock is typically updated once a week". Is there any way I can change this interval? My computer clock isn't too accurate so I should like to syncronize say at least daily instead of once a week.
View 9 Replies View RelatedI have a quad-boot Intel CoreDuo machine with 4 GB of memory and an ATI AIW X1900 Radeon (multi-booting courtesy of EasyBCD). To put the matter as quickly as possible, all four systems (Vista 32, Vista 64, XP, and Ubuntu) have been happily coexisting for a long time. I haven't used Vista 64 for about 10 days and went in to do some work on it this morning. To my surprise, the video disappeared immediately after the green startup wait indicator. Eventually, after about the usual amount of time and hard disk activity, the startup sound came on but absolutely no video. I restored my full backup of the Vista 64 partition from last Sunday=97 same problem!
I went in on safe mode but it is impossible to change video settings or install new drivers in safe mode so that was a dead end. I tried the repair utility that comes with Vista but it could find no problem with startup. My working hypothesis is that something has gone wrong with the video drivers although that may not be the case. Even if it were, I can think of no way of fixing it short of completely rebuilding the Vista 64 system checked desperately do not want to do
That is the message I get from the icon in my Vista tray. When I try to manually check for Windows Updates I get the message that I need to "first install an update for Windows Update". When I try to install that update for Windows Update, I get error code 80070643. There is a lot written about Windows Update error 80070643 having specifically to do with restarting the Office Source Engine for Microsoft Office 2003. HOWEVER, I do not have Microsoft Office 2003 installed on my system and this is not my issue! I am quite fearful at this point that I am vulnerable to all sorts of attacks considering that I haven't updated Vista for about 6 months now. This is not good.
View 6 Replies View Relatedwhen going to the windows update window,i get a white blank page and it says "the page failed to load"i did restart, same issue.
what is it all about?
and another thing, i don't have a Floppy drive in my computer however a Floppy A: drive is present in "Computer" how can i remove it from the list?
Microsoft Update was first released a few years ago for Windows XP and Server 2003 as a great way to update all of your Microsoft software installed on your PC. Not only would it update Windows, but it would also update Microsoft Office. Are you a Microsoft Outlook user? If so, Microsoft Update would even download updated junk mail signatures when they are released.
In Windows Vista the new Windows Update application is no longer web-based. Microsoft has built-in the old Microsoft Update functionality into the new interface but you need to turn it on before you can use it. Follow these steps to turn on updates for other Microsoft applications: ...
I am updating my computer and I thought it was finish but my computer restarts and I encountered the death blue screen. I can't switch into safe mode, safe mode with networking, safe mode with Command Prompt and Last Known good configuration. I don't know how to solve this problem because I can't get into any of the modes and even I inserted the installation disc I can't still see any repair computer or what. It will just turn to blank screen with space at the upper left after if i will insert the installation disc.
View 7 Replies View RelatedI understand that Vista SP2 RC update has to be uninstalled before installing SP2 RTM update(when bcomes available). Does 5the Windows Update automatically uninstall SP2 RC update or does it has to be done manually?
View 4 Replies View RelatedThe last time an update was installed was in January..since the next time i was offered an update, Windows Update or any of the programs that use windows update fail to update. Also i can't download the updates manually..standalone msu installers also dont work.. windows defender, IE8 installations also fail to update. And unfortunately i have deleted the recent system restore checkpoints before i knew about this problem. Windows Update gives error 80070002, i have tried the "solution" to delete temp update files, and all other solutions i could find on the internet. Windows defender gives the same error.
The updates can be downloaded from windows update, but cannot be download (not even manually in .msu package) I also lost many shortcut files of MS Office (the icon turned white and they lost their target). Some shortcuts of 3rd party programs are also lost (which were supposed to be in c:windowsinstallerlabla I have Windows Vista Home Basic with SP1 (SP1 came with the ssytem when i bought it). This is very weird. I have no other choice than to reformat drive and use recovery disk.
I want to use my laptop with Vista x64 as both "HTPC" and as a Work computer. Problem: When using it as a HTPC i need to change the DPI scaling in order to be able to read any text on the 27" screen. This is perfectly fine, but when using it as a Work computer this DPI setting wont look nice on the 15" inch screen. So I have to change it and restart the computer, a very awkward process in the long run. One idea i had was to create two users with one used for the HTPC since the DPI setting is global (HKLM) together with screen resolution and other hardware settings (like sound output). I basically just changed the Font size, Icon size and Border sizes for the HTPC user. This works sort of but, unfortunately, only seems to be valid for the Desktop and a select few menus in Vista (like the start menu, main control paned window) most sub windows and dialog boxes are still displayed with the puny 9 pts font
Another wild idea might be to run a "DPI Change-script" at startup, if it's even possible to change the DPI that way. Has anyone tried anything similar? I suppose it needs a restart anyway, but at least it would be automatic. Is there a registry tweak to make the font change apply to everything in Vista. or, a tweak to make the DPI setting Local? (i.e only aplies to current user) I guess, if it would be possible to make Windows apply these (DPI) changes without needing a restart, that would be acceptable.
I can't find the regular settings to begin using windows mail....just got Vista, and never used Outlook....but I can't find the POP and SMTP settings.
View 9 Replies View RelatedI have tried on many occasions to change my SMTP port from 25 to 587, but after I apply my changes and exit Mail and restart Mail, my SMTP ports resorts back to 25. The same thing happens when I change Outgoing Mail Authentication settings. I make the changes and things work, but as soon as I exit the program nothing sticks. Running Vista Home Premium with the latest updates.
View 6 Replies View Related