Networking Connection: "limited Network Connectivity."
Jan 29, 2009
I've been having this issue with Vista for over a year now. I just recently reformatted my machine AND bought a new PCI network card (I thought maybe the problem might be related to the onboard network port/driver) and the issue still persists.
This is a nasty one. My network connection simply cuts out at random times. By random I mean I'll be connected between 15 or so minutes to up to 2 or 3 days before the problem occurs. My network icon down in the task tray will show a yellow exclaimation with the message "limited network connectivity." The only way to fix this is to reboot. What's worse is that there are no errors in thrown in any of the Event Viewer logs.
View 9 Replies
ADVERTISEMENT
Aug 21, 2009
I lost connection thinking it was the laptop i tried switching off the wireless card and deleting teh settings however it did not help. I only realised i had just lost connection completely. Now every time i connect i get unidentified ntework limited connectivity.
View 4 Replies
View Related
Feb 20, 2009
Well basically last night my internet was running fine and when i woke up to turn it on i got Unidentifed Network - Limited Connectivity, I'm using my laptop's connection which is the same connection way as the other computer so i'm guessing there is somthing wrong with the desktop
View 9 Replies
View Related
Apr 16, 2008
About 3 days ago I was downloading a file when I noticed the download had stopped half-way through. Thinking the router had frozen I unplugged the router to reset it, as I have done a hundred times before with no problem. After restarting the router Vista (Home Premium 32-bit SP1) stopped recognizing my home network (wired) and I started receiving a "Limited Connectivity" message. When I go into the Network & Sharing screen I see "Unknown Network". When I boot this same computer into Ubuntu (7.10) I can access my network and the internet. I also have a small Ubuntu server and Xbox 360 that can access the network just fine. This is definitely a Vista issue. After trying many, many suggestions (Unplug router, Reset router, IP refresh,...) from around the internet with no success, I purchased a new PCI Ethernet card (Netgear GA311) just to rule out a possible hardware issue. I unistalled the onboard lan in Vista and disabled it in the BIOS then installed the new card. No Luck, Same Problem. My router is a Netgear FWG114P. I have had this network for over a year with no issues and now, out of the blue, nothing. I tried re-entering the IP, Subnet, Default Gateway and DNS addresses for the ethernet adapter, NO LUCK. I did notice a strange issue when I ran "Ipconfig /all" The default gateway was shown as "0.0.0.0". After re-entering the gateway address, the gateway was listed as "0.0.0.0" with my gateway address listed below.
View 9 Replies
View Related
Mar 23, 2008
After upgrading Vista Ultimate to SP1 two days ago, I noticed on the Taskbar that I'm getting a yellow Caution symbol on top of the Network Icon. My internet connection seems to be working correctly. I've tried resetting my Linksys router, removed and reinstalled Norton Internet Security 2008, upgraded my NIC drivers, (I'm using an ASUS P5K Deluxe motherboard with built-in networking.), tried the Network repair options, etc.
View 5 Replies
View Related
Mar 23, 2008
I have 2 computers at home both running XP SP2. One plugs directly into my Netgear router and the other is wireless. I recently bought a laptop withe Vista Home Premium. I was able to connect to the network before, but I think I accident;y changed something. It is now showing my network as a public network. It continually says "Identifying. Public Network)" in the Network and Sharing Center. Access is Limited connectivity. Also I am NOT able to access the Customize link in the NaS Center like I was before.
View 5 Replies
View Related
Apr 29, 2009
From time to time, specially when I`m doing heavy uploads or heavy downloads my connection goes from full internet to "Local Only" or "Limited Connectivity". Thus, all internet access is lost until I reset the connection (disconnect and connect again). When the connection is reset, the problem is solved and the issue is fixed, that is, until it happens again a few hours or days later.
I`ve found out that this is quite an usual problem for all Vista users, most of my friends have this same problem and I`ve seen hundreads of posts in the internet about it, but no solutions were found. I`m running Windows Vista Home Premium 64bit on a HP dv7-1245dx notebook. I have another PC which also runs Vista 64bit, two notebooks and a PC that run WinXP.
From all of these machines, only the ones running Vista are affected, I do not have this problem with the machines running WinXP. All machines are wireless (connected through WIFI) but the PC running WinXP. I`ll use my main notebook as the scenario for troubleshooting. ...........
View 9 Replies
View Related
Sep 26, 2009
I know there are several threads like this on the vista forums, but the postmaster recommended a new thread so i am kindly obliging. I have the same ****ty problem many before me have had. One peeerty day I turned on my Vista comp, and all of a sudden my wireless connection had stopped working. Limited or no connectivity was the message I got. So I fired up my notebook, running with XP - same thing. Limited or no connectivity. Only when I did diagnose problem on my XP it did precisely that. and the problem was gone............
View 9 Replies
View Related
Mar 23, 2008
I have 2 laptops that are running Vista and get this message numerious times. I also have 2 Windows XP pc's on the same network. Why do the Vista pc's keep having this issue. My Linksys wireless router is setup with no restictions so I can get this problem fixed.
View 9 Replies
View Related
Jul 23, 2008
I'm on Vista Ultimate x32. I connect to my internet wirelessly using a Linksys USB adapter. When I'm downloading something my internet stops working, downloads top and it says limited or no connectivity - so I have to disconnect from the network, unplug the USB Adapter and then re-plug it in and then it connects.
View 5 Replies
View Related
Mar 23, 2008
My Packard Bell EasyNote MX37-U-05 (Running Vista Home premium) was working fne on a wireless network through a BT Wireless home hub. It did automatic updates and since then has connection problem reporting "limited Connectivity" what does this mean and how can I cure this problem? It seems to be the same if I connect through the Wireless or direct on the hub Lan connection.
View 6 Replies
View Related
Mar 23, 2008
I m trying to resolve limited internet connectivity via ICS. My Vista 64bit Ultimate notebook connects directly to a wireless network, from which it gets internet connectivity. I can visit any webpage and see all network devices, so things seem to be working great on the server side.
My other computer, the ICS client, runs 32bit XP pro and is set up to connect to the internet through my notebook. Between the two PCs is a spare buffalo WHR-HP-G54. I can see all network devices, but it fails to connect to most websites. It will display Google and *some* pages from Time Warner Cable, but I cannot get to Wiki pages, my favorite forums, or download updates for anything on my desktop PC. Based on the status bar of my browser, which usually gets as far as "Transferring data from ", it seems the communication problem is limited to incoming streams........
View 8 Replies
View Related
Apr 7, 2008
I am one of the many users experiencing problems with wireless connections that work until your laptop goes into powersave mode, then only allow "Limited or No Connectivity" I have 2 wireless routers, a Linksys and ActionTec, supplied by Verizon with FiOS and Linksys has helped me a couple of times to make it work but that is all. Verizon is clueless. As am I since I have 4 XP laptops that all work. Vista is apparently trying to prevent me from hurting myself, and therefore I am unable to fix it.
View 7 Replies
View Related
Sep 24, 2009
I'm facing problems with my internet connection in my vista. I'm trying to connect internet thro usb cable of my mobile as i've taken subscription of mobile connect. It used to work fine but now it shows as limited connectivity. In pc suite it shows as connected but cant connect to internet. I've tried all best possible options to check the connectivity.
View 5 Replies
View Related
Sep 5, 2009
Got a new laptop (VISTA) and already have a wireless router (netgear) in the house. We connected the laptop wirelessly with no problems yesterday and this morning. Then, out of the blue, I get a "limited connectivity" message even though the signal strength is excellent. Our wireless network is the only one that's listed "connect automatically" and we were connected to it yesterday and this morning with no problems.
View 7 Replies
View Related
Jul 5, 2008
I have an old machine running Win2K and a new laptop running Vista. Both machines are in a workgroup. The Vista machine can see itself, the Win2K machine and the router. owever, the Win2K machine can see only itself. Can someone tell me if Microsoft did this purposely to encourage people to migrate to Vista? Everything seems to be configured properly. If someone can tell me how to check out things thoroughly,
View 7 Replies
View Related
Jan 26, 2010
I have Vista Home Basic OS with AVG free. This past month a new icon appears in my bottom task bar without any warning or my specific command. It commences to connect to my Internet dialup provider. The PC sends about 15KB, receives about 30KB and then no acitivity. The connection does not disengage after a few minutes of preset inactivity as my standard connection does. Clicking on this icon does not help. It won't respond to a left or right click. The Task Manager shows nothing. How do I eliminate this program? My attachment has an enlarged snapshot of what the icon looks like.
View 9 Replies
View Related
Nov 19, 2009
I am the manager of my network at my house and i have set up my router with an encryption key i can remember. My mom just got a new laptop and we can not connect to it because i FORGOT THE KEY! My computer is wired directly to the router. I went to my IP address and wouldnt you know it, i forgot the login info! I can reset the router from the router itself, but it took me a while to set it up. Is there any way i can get around my login since i am directly connected?
View 6 Replies
View Related
Feb 18, 2009
The computer starts up with wireless networking and wireless connection working fine. At some seemingly random time (usually a few hours) my connection status will go from "local and internet" to "limited connectivity" with the little yellow warning icon. I try disconnecting and reconnecting, it can't connect. I turn off and on the adapter using the on-keyboard button, it says it is going "off" then "on" but connection is not restored. "Repair" attempts fail immediately, with no explanation given, it just says it can't connect.
I can't ping any IP address or websites, I get "host unreachable" messages. The only solution is to restart, at which point everything is fine. Note that in this time when the wireless is not functioning, I can plug in an ethernet cable and be connected to the internet just fine. I did IPCONFIG/ALL in the connected state, and the 'after' disconnected state. In the connected state: Wireless LAN adapter Wireless Network Connection:........
View 8 Replies
View Related
Mar 23, 2008
We have a Dell with Vista running on it. we connected it to the university network and are not able to get any browser to find any web site. I open a command line and do a ping both with ip address numbers and via name and ping works fine so there is network connectivity and name server access. I can't find any answer to why the browser will not work. I have tried the microsoft browser and mozilla neither will work. Does any one have any ideas? I am a nubie to Vista. but pretty well versed in 2000 and XP.
View 4 Replies
View Related
Mar 25, 2009
One new computer using Vista Home. Installed wireless network card and ran software. Found and established connection to wireless network in the office. Then....I setup the network to be secured, connected with a Win XP computer with no problems using the correct key. Did the same process with the Vista computer, found the network, asked for key, entered correct key and have limited connection. Reset everything on network. Switched back to unsecured and hooked right up. Disabled firewall, the only thing running is McAfee Total Protection, no firewalls.
View 5 Replies
View Related
Jan 19, 2010
We have recently installed another computer in the house. I can detect it in 'Network'. If I click on the this new computer icon and login, what features and facilities will be available to me when working on the original computer.
View 5 Replies
View Related
Apr 20, 2010
Have a small network consisting of one Win XP Media Center Ed. and one Vista home premium (and an Internet router). The Vista crashed and was restored to factory and apps reinstalled, etc. Each computer has dedicated IP address, and each runs a version of Norton Internet Security. They are in the same workgroup. Prior to the Vista problem, all was generall well. Now, the XP seems to lose network connectivity to the Vista computer when the computers are turned on in the morning. This is important for many reasons, including that the XP uses a printer attached to the Vista for most of the XP's printing needs.
I have set up a user on Vista that matches the user on XP, and have set the NIS on Vista to allow all connections to the IP of the XP box. And all is well until that reboot. There may be more to that, but in the few days the rebuilt Vista has been up, that has been the story. I have been able to restore the connection by launching Network Places, and searching for the name of the Vista computer. It so far does not show up in the network view until I do a manual search using the computer name. Then when it comes up and I double-click on the Vista C: drive, I'm prompted for login info, which I give and then I get connected (why is this not automatically done for me?). I've also mapped a drive to the Vista and set that for "reconnect at login."
View 9 Replies
View Related
Mar 23, 2008
I have finaly gotten xp and vista to network together with no trouble through a hub/router/switch, I can see both computers from eatchother and run programs between them no problem. The problem is i have a connection to the internet with the vista computer but not the xp computer. If i try resetting the router and cable modem what ever computer i load up first gets the internet conection.I have to force the ip adderss by making it match within on number the vista ip. basicly shove the network down vista's neck. I have went into the vista computer and made sure i checked the box to make it so that any computer on the network can surf the internet though its internet connection but my xp still can not see the internet.
I have tried using command prompts to ping the internet and ping my gateway but that is no good. On vista i can map it out and see the gateway but with xp even when it has the internet connection i do no see the gateway. is there something i am missing in the set up of the network and is tthere a fix without updating to vista and or taking a axe to my vista computer i just spent 2 grand on.
View 4 Replies
View Related
Sep 12, 2009
I just installed an OEM windows vista home premium onto my computer so that I could take advantage of my 6GB ram. Unfortunately I don't know too much about building systems and I have an internet problem. After I installed the OS, when I plug my computer into my router, I always recieve "unidentified network..limited or no connectivity". I've done everything that the internet company has asked me to do as far as my modem/router is concerned, and Acer wants to charge me a buttload for their help.
Am I missing something simple that I need to do with my 64 bit software? I downloaded the 64 bit drivers for my LAN, audio etc from the acer website but it seems to still do no good. I even downloaded the driver directly from my Lan ethernet controllers brand website. I've been stuck here for days without much help and the wierd thing is that my girlfriend can plug her computer (32 bit vista home premium) right into the router and it connects fine. I'm downloading SP2 now if that makes any difference.
View 5 Replies
View Related
Mar 23, 2008
I have started to notice a lot of vista systems that are connected direct to cable modems saying not connected to internet or showing unidentified network. You cannot create a new connection, because the create a connection is for PPPoE only, (which is not very smart). And when the browser gives you the option to connect, it asks for name/password for a PPPoE connection.
1. How do I get the Vista networking to recognize the fact is has a direct connection to the Internet?
2. How can you create a new connection without it defaulting to PPPoE?
3. Is there any way to force Vista to simply connect to a network, if the network is available, and has been checked with other computers as working properly, and Network discovery is on, and vista simply says unknown network?........
View 6 Replies
View Related
Oct 7, 2008
I have with Vista and an ad-hoc peer-to-peer wired network. When I run the wizard to connect to a network, it does not show the add ad-hoc network option, only four others for wireles, internet and vpn connection. Also, although I have networked two PC's both running Vista, I cannot ping the second machine from the first and vice versa despite having added routes to both machines. nslookup recognises the ip address of each machine, as does tracert(I should point out that both machines obtain their iP addresses from a router which also allows access to the internet. Both machines can see the internet).
View 4 Replies
View Related
Mar 23, 2008
using the laptop through wireless I can see other computer and even list their shared folders but when I try to actually list files the connection timesout and gives an error os dennied access to the shared folder. If I try to use VNC for instance, the client connects, asks for pass and then after the remote screen starts to appear.. it hangs... no response after that . The strange part of the problem is that if I connect the laptop through a wired connection everything works ok I access shared folders, I print remotely, no problems. I tried a number of things , the most obvious, like firewalls diferent settings on the network etc. What I can't figure out is what can be so different in the PC for the wired to work but not the wireless.
View 9 Replies
View Related
May 15, 2010
At my office we have 2 computers (both Vista version 6.0) networked together. I'll call them computer A and computer B. I can access, modify, and save Computer B files from computer A - I can save them directly to B or A. However, when I'm on computer B, it will only let me access files on computer A, which I then have to save to computer B if I want to save any changes I've made. I get a message saying they're read-only files and I don't have authorization to save to computer A.
View 6 Replies
View Related
Mar 27, 2009
I can't seem to find the drivers i need to astablish a network connection. I went to ASUS's website typed in my GPU's model and couldn't find a driver for network connection anywhere. EDIT: LOL! not gpu i mean mainboard as i have an inbuilt networking card.
View 4 Replies
View Related
Apr 17, 2008
Two vista home premium computers, desktop and laptop, are connected to a private network(Netgear router). Both can use internet through router and dsl modem. The two computers cannot communicate with each other. Each shows up on the other's full map, but not in the list of computers and devices. Network discovery, file sharing,public file sharing, printer sharing,media sharing are on, password protected sharing is off. Also Desktop prints to wireless printer, laptop can not. Laptop has drivers installed from disk, not over network from desktop since they do not communicate.
View 9 Replies
View Related
