Task Scheduler (Local) Upon opening TS..a error box populates and no (Local) data. Upon Xing close the error box...data populates.. Message in error box..The Task Image is Corrupt or has been Tampered with.mcupdate...I ran sfc..nothing reported
View 9 RepliesI'm not sure where to post this question. Will start here and if it's not here that I should post it, please tell me. My problem is this: when I open Task Scheduler, I get 53 pop-up error messages that various scheduled tasks no longer exist, and to get them back click on refresh. When I click on refresh, I get the same pop-up that it no longer exists. I identified all the folders that have the pop-up error messages, checked in
c:WindowsSystem32TasksMicrosoftWindows and then opened one of the folders that's generating the error message and verified that the file named in the task that is failing is indeed there. I went back into Task Scheduler and attempted to import the task, and then it tells me, "An error has occurred for task. Error Message. A task or folder with this name already exists." Someone's advice was then to just delete the
task. Why would I do that? These are default Windows tasks and I'm having problems with Windows Calendar's alerts not working, and I believe it's coming from the fact that Window's default tasks "no longer exist", even though they do! Can anyone stear me in the right direction? I've been all over the Internet for answers.
When I open task scheduler a pop up says "an error has occurred for task MCVsurveyReminder4 Error message the specified name is not vailid.". It repeats 4 time when i click OK and is followed by 4 of "an error has occurred for task MCVregistrationReminder4 Error message the specified name is not vailid". And finally by "an error occurred for task reminders - username Error message the specified account name is not valid"
I think it is something to do with a task to register my vaio or take part in a survey but I cannot get rid. It is in task scheduler local and there is no delete. I found a similar situation on the vaio site but cannot find now.Found it http://club.vaio.sony.eu/clubvaio/gb...7&lastpage=yes
I'm trying to back up my file, but in the process I was asked to start the task scheduler. when I do start the task scheduler, I get the following message: Task Scheduler is not available. Verify that the service is running.! I tried command prompt as well but I get nothing.
View 5 Replies View RelatedI want to automatically log off user after idle for 10 minutes. The problem appears to be that Vista won't go into an idle state. Lots of stuff running in background, and even my time clock on desktop I suppose keeps the PC from not idling.
View 4 Replies View RelatedI've written a simple console application in Visual Studio 2010 (VB.Net) that I want to schedule with the task scheduler (in Vista Business). Everything looks ok when I schedule it. However, it ALWAYS returns the run-status of "Failure".
View 2 Replies View Relatedi m not eable to start the cheduler wath i do wrong? the prog is: "C:Program Files (x86)PowerGUIScriptEditor_x86.exe" next line the file name: "C:UsersAdministrateurDocumentsPSf***3D********.ps1" and the cheduler can find any file
View 9 Replies View RelatedI have a vbs script that I use to copy files from my local drive to a network drive as a backup. The script works fine on its own (by double-clicking it or by running it from the command prompt). I created a scheduled task to have it run automatically, but it doesn't seem to work. It says that it completed successfully, but it didn't really do anything. Even if I select it in the Task Scheduler and then click "Run" in the Actions pane, it says it's status is "Running", but nothing is happening.
View 9 Replies View RelatedWhenever I open up the Task Scheduler, I get the following pop up windows,then, after clicking on the OK button, followed by,Everything seems to work OK and programmed things happen when they should as far as I can tell. I don't use Windows Media Centre very much as I do not have a TV tuner installed but otherwise it seems to work. No idea what the "Reminders - David" are - must be something I tried a while ago. I have a Dell desktop with OEM Vista Home Premium....
View 5 Replies View RelatedHaving noticed that some of the automated tasks I had scheduled were not running, I opened Services.msc and looked at Task Scheduler which hadn't started. Selecting properties showed all options greyed out. I can't select Automatic, Manual, Disabled or anything. The contents of all other tabs are also greyed out. All dependencies are running.
View 4 Replies View RelatedI read in web that Task Scheduler version in Windows vista /W2k8 is version 2.0. I have a machine with W2k8 installed. I checked the Task Scheduler version in about dialog. It says 1.0. why is this so. Where can i see the 2.0 version of task scheduler?
View 4 Replies View RelatedYou can't use task scheduler in Vista due to bug/conflict with UAC. Any known cures/fixes/patches???
View 4 Replies View RelatedI have a problem in vista 64bit: If I set up a task in the Task Scheduler and I check the "Wake the computer to run this task", the computer wakes up (from hibernate) at the specified time but the task doesn't run.
View 9 Replies View RelatedWhat is the difference between a 'Manual: Restore Point' and a 'System: Scheduled Checkpoint' if any? Because I just had to tinker with the task in Task Scheduler to make it more to my liking I no longer get scheduled checkpoints after midnight if the computer is on--I don't get any scheduled checkpoint. Before I get into more detail of what I recall changing--I know I deleted the default multiple task to also create a scheduled checkpoint at boot or logon--I want to test whether anyone will tackle this problem with me or if it has been handled so many times over the years that the post will just be ignored?
View 8 Replies View RelatedSystem restore does not run via the Task Scheduler. I show that the triggers in Task Scheduler are set for:
1. At 12:00 AM every day
2. At sytem start up.
I have checked the history in the Task Scheduler and have the following error: Task Scheduler failed to start "MicrosoftWindowsSystemRestoreSR" task for user "NT AUTHORITYSystem". Additional Data: Error Value: 2147750691. If I go to the "Actions" tab in the Task Scheduler and then click on run, system restore runs.
The "Conditions" tab in the Task Scheduler is grayed out but shows the following are checked: Start the task only if the computer is idle for 10 minutes and Start the task only if the computer is on AC power.
I have a problem with the task scheduler. I have a stockpicking program (stockbrowser) that i want to run every hour from 8:00 till 18:00 on weekdays. So I defined a task as listed below, but the darn thing won't stop at 18:00. It keeps on running every hour weekdays, weekend, night and day. Now I know that Vista has good stamina, but I hate it when I am playing a game and it is starting to run in the background. what i am doing wrong? You would be forever in my mind. well at least a day or so.
View 6 Replies View RelatedI cannot get the task scheduler to send an email. I have used my outgoing pop3 and smtp server names but in neither case will an email get sent out. I think this is something simple but the solution is not obvious to me.
View 5 Replies View RelatedTask Scheduler Running Tasks in Task Scheduler Under Current Action there are several tasks running that I have neverscheduled:
AutoWake Task Handler Class
Microsoft PlaySoundService Class
Certificate Services Client Task Handler- there are 2 of these running
Transient Multi-Monitor Manager
Custom Experience Improvement Progress
Mobile PC- Launches application configured for windows Hot Start (I do not use a Mobile PC)Multi Media System Sounds- User mode Agent Shell- Index all Crawl type Start Addresses Does anyone know why these task are running all the time and whether I can delete or disable them?
I have been struggling with the task scheduler since upgrading to Vista. I used to have the XP task scheduler run Realplayer when my PC turned on via the bios RTC each morning, and play BBC Internet Radio. Worked fine, no problems. Vista however simply cannot do it. I have setup the Vista Task Scheduler to run a command line that I know works - I have tried dummy runs of the task scheduler when I have been logged in, and it goes no problem. I have also ticked "Run whether user is logged on or not" and entered my password when prompted.
When I login after Realplayer has failed to launch, the Task Scheduler history tab shows the following:Event 107, Task triggered on scheduler, etc, then above it, Error, event 101, Task Start Failed, Launch Failure.Most interestingly, in the failure details it reads:"Task Scheduler failed to start "Alarm Radio" task for user "ROTOMADave".
Additional Data: Error Value: 2147943726." What I find strange here is why the user is ROTOMADave (ROTOMA being the name of my Workgroup) when the user account is DAVES-DESKTOPDave.Could this be causing the problem, and if so how do I fix it? As an aside, the task will successfully run if I login to my PC before the scheduled task, then logout and wait at the login screen.
I've been reading a lot in the forum lately but now I have to post as well...I've been trying to get the old Task Scheduler (at.exe) running on Vista Enterprise to have scheduled jobs run indefinitively. Right now, I add a process via e.g.$> at 15:00 notepad.exe The job will start fine on the chosen time but will cease to run after 3 days (72 hours), killed by Vista/Task Scheduler. A look via Start -> All Programs -> Accessoires -> System Tools -> Task Scheduler reveals, that a flag is set "Stop the task if it runs longer than" to "3 days".
Googling for help, I found a KB entry from Microsoft, how to change the default ehaviour via a registry edit (A Task That Is Scheduled with the AT Command May Stop After 72 Hours Win XP/2000). This didn't do the trick on Vista Enterprise altough the registry section exists with the required parameter "AtTaskMaxHours"). Has anyone encountered similar issues on Vista or has anyone been able to overrule the default behaviour from 3 days to an "endless" job run?
i have a problem with Task Scheduler, i need it to work for my auto back ups, but i cannot turn it from manual to auto in the services panel as the box is greyed out, i can start it manually but if i turn my laptop of i have to restart it again manually. Also Windows loses all the backup settings and i have to do everything again. Everything is ok as long as i don't have to restart my laptop. i have checked all the uac settings i know all the other services that depend on it everything seems ok. No other services have there box for changing from manual, auto, or disable greyed out
View 9 Replies View RelatedSo I turned on my PC this morning ( vista 64 bit ) and I could not connect to the internet. I hover my mouse over the little internet connection icon in the botom right hand corner and it says local access only. Has anyone else had this roblem? Is more information required (more than likely) jsut let me know. This is jsut another reason to have vista.
View 9 Replies View RelatedI have a Dell Inspiron 1720 with Windows Vista
I'm trying to connect to some unsecure wireless networks at a friend's house for the first time and am only able to connect with local access.
I try diagnose and repair and it says that there are no issues. Three other computers are connecting to the internet just fine.
They signal is good, and there is supposedly data being sent and received but no programs will connect to the internet.
This issue has never happened before. I regularly run a registry cleaner and tried restoring to a backup from a couple days ago and that didn't help.
Recently built out of spare parts and some new parts a Media Center PC. Loaded Vista Ultimate X64 on the box and have it hard wired to my network. Issue is limited connection on my network and no internet connection. All was working great until SP1 was installed. Since then I can not access the internet, ping my router or see my WHS or my wifes XP Pro laptop, but I can see and access my daughters laptop running Vista Home Premium and my laptop running Windows 7 RC1.
I have tired to disable IPv6 both through the proprieties on my nick and through the registry, no effect. Tried netsh winsock reset, no effect, also when I go into network settings network discovery is turned off, I enable it with no effect, next reboot it is off again. I saw a post about putting local services group in the administrators group, no effect. I have a D-Link DI524 router my MC PC is showing up in the assigned IP tables, the IP that is returned when I do an ipconfig matches the one issued by the router. As I stated before I had NO network connection issues until SP1 was installed. Is my only option to un-install or remove SP1, is that even possible?
I'm posting this from another laptop using the same router. It seems this is a common problem without any certain resolution. I've tried most of the plentiful suggestions on the web without success. I obviously don't want to flatten the laptop and re-load just to get internet access back.
View 9 Replies View RelatedI recently bought a new Vista computer.
I had a Windows 98 computer previously.
I copied the "dbx" files from Outlook Express 5 into a temporary folder on the new machine.
I imported them into Windows Mail (correcting the path error in the import wizard).
Windows Mail crashed, and when I reloaded Windows Mail all of the local folders had vanished except for the Inbox, which was inaccessible. After restarting it again a few times, nothing changed.
Eventually I went to the folder store in AppData, and deleted all the files in the Windows Mail folder, assuming them to be corrupted in some way.
When I restarted Windows Mail, it recovered and recreated the Local Folders structure for me again.
Back to square one.
I tried importing the "dbx" files again, and this seemed to work,appearing under "Imported Folders".
All seemed well, but now for the problem.
If I want to create a folder, or delete a folder, or move a folder,the change does not show up live in the folders list in the left pane.
However, if I click on local folders, the change shows up in the right pane, which lists the local folders tree in expanded form.
To repeat, Windows Mail seems to make the change to the folder structure, but does not update the live folders list in the left hand pane.
However, if I restart windows mail after creating, deleting or moving, the change is visible in the left hand pane.
My friend, who now does not have a connection to internet with a wired router, has asked me for help. His connection is showing "local access only" . He runs Vista Premium on his desktop and was connected yesterday. Vista updates installed automatically, and after restart he only had " l. a . o. " connection.
View 9 Replies View RelatedI have two computers at home, both using XP, both directly connected to the speedtouch modem/router (it only has two network slots). My friend just bought a notebook, an Asus F3K. Since he only got Vista drivers with it, we installed Vista Ultimate. Everything went as planned, and it all works ... but the network connection. At first I connected it using my first computer's cable. It says "local only". Now the fun part ... I went to my second computer and connected the laptop to the network using this computer's cable ... and it suddenly worked fine.
But, even though ... both XP computers run fine and have no network problems, as long as I don't use one of their cables to connect the laptop. It's an Asus F3K as I said, using a RealTek network card. I unticked the IPv6 in the network connection properties, and I followed the "additional information". My friend also tried to connect it at home, but he got "local only" as well. We both use the same internet provider and have the same modem/router. Also, when Vista starts solving the problem it identifies the modem/router to be the problem ... but both modems work fine if we use XP. Using XP on my friend's computer is not an option at the time, since all of the supplied drivers and applications are Vista only.
I don't know what the Folder or File names are for my Local Folders in Vista Mail.
My old HD began making noises so I bought a new 750KB FireAgent last week,
(ST307504FPA1E3-RK), and Backed it up immediately, before Dell replaced it.
I had my HD set with 4 partitions and Backed them up individually: C-OS & important
programs, D-Vista's Recovery, E-non-critical programs , F-Data.
There were other problems in the C: OS drive so I could not just restore it as I had to use the Dell reinstallation CD.
I have restored most folders and files, BUT my Vista Mail "Local Folders" with all the subfolders and messages did not restore. If I look in I:/backup/CarlP,
I can see C, D, E, F. But, I don't know what I'm looking for, don't know what they would be called, where they are, and how to get them back. It's imperative that I DO restore the information stored in the messages.
I have 2 laptops both running vista home premium and both have been working perfectly until recently. I use 3 mobile broadband and this worked fine until i upgraded the hardware to a faster version. When i did this i could not connect to the internet on my 2nd laptop. I was getting the message "local access only". My other laptop still worked fine on the new dongle so I could live without my 2nd laptop on my home internet as i primarily use this one for college anyway. However, i then decided to get a mobile broadband router. When i connect this up i can detect the network on both laptops and connect to it but i am now getting the message "local access only" on both computers.
I have spent literally hours of my life on the phone running through every kind of test with my isp and still have gotten nowhere. They cannot identify the problem and are telling me that there actually isn't one and can't understand why its not working!
i just got a new PC last friday with 64bit vista ultimate and i have been having alot of problems with hooking it up to my home network. At first, i would plug it in and it would only let me get into "local area connection" local access only. I did a repair install which got rid of all updates that the company had put on, so its a fresh SP1 install. Now i can sometimes get it to connect to the internet, but the speed is ridiculously slow, like if i look at the antivirus updaters for speed (i cant access speedtest.net cuz it says i dont have flash or w.e. and it wont let me download it cuz the site wont load) i get max speeds of...4 kb/s.
View 4 Replies View Related