I wanted to partition my 750 GByte disk to give Windows and Programs together about 300 GBytes and I wanted a separate partition for data storage to be about 400 GBytes. However, I can not "shrink" the OS portion below 460 GBytes. I have removed the un-movable Page File. Is there some way to discover who has put an un-movable file at 460 GBytes and is there some way to move it out of the way.
View 7 RepliesI have a laptop with a 90GB hard disk. There is 60GB free and I'm trying to use the Shrink volume option in Disk Management to make the main partition smaller. After I want to create an additional partition so I can dual boot. The problem lies with Shrink Volume. Even though I have 60GB free it's only offering me the chance to shrink by 14GB.I've turned off system restore and hibernate. I've also used a number of defrag tools including Auslogic and SysInternals.
View 7 Replies View RelatedI refer specifically to this Tutorial;
Disk Management - Shrink Partition
A bit of background first. I have recently had installed a new 320GB Hard-drive to my Laptop [see my Specs]. The allocation of partition [volume] space has been divided evenly between the C:[Acer] - 139GB, and the D:[Data] - 138GB, Drives on the HD.
This is what I have;
Questions;
Question 1; Is this setup division just the 'norm' for allocating volume space for each drive? In this case it is more or less a 50:50 share of the available space [PQ Service on a hidden partition takes up the rest]....why not 65%[C]:35%[D]? Question 2; Is it necessary for the partition volume of the Data drive to more or less mirror that of the Acer drive? Question 3; If answer to Q2 is 'not necessarily so', am I then able to partition the Data drive to create a new drive partition of about 60GB, or are there any pitfalls in playing around with this particular drive? If possible, I'd like to create a new drive on the HD for personal data storage.
I downloaded Windows 7 RC1 with the intent of adding a partition to my HDD and dual booting. My understanding is that I would need a 16GB partition. My Disk Management Console tells me I have two existing primary partitions (expected). D (the recovery partition) is 6.62GB. The other (C) makes up the difference (~142GB) and has 47.1GB free space. When I begin the "shrink volume" process, it says that only 3MB is available to shrink C. I checked the page file and it has less than 3GB allocated to it. So, I have two questions. First, why isn't more shrinkage ;>) space available? Two, assuming that with your help I can find more space, if I try to create a 16GB partition from C will I significantly affect computer performance?
View 9 Replies View RelatedI want to shrink the C Drive (Vista Drive). Actually 111GB is free out of 236GB on the C Drive but I am only about to Shrink 6GB and even when I try to Shrink the Drive by 6GB I get an error. I want to create a new partition on my hard-disk. These are the screen shots:
View 6 Replies View RelatedI just purchased an HP all-in-one. The fax portion of the unit appears as a printer option whan I want to print a documant. However, when the fax is selected, sometimes I get the fax info promt and othere times, nothing happens. Has anyone determined how to send/receive faxes throught their computer without having to print a hard copy? I used to use Winfax Pro, but that (and everything else) is not Vista compatible.
View 4 Replies View RelatedI want to have certain items open in a program that is not listed in the drop down box for that item. For example, for my Canon camera, I want it to open with zoombrowser and yet zoombrowser is not one of my choices. One other program wants to open with Omnipage version 14 - yet I have updated to version 17 and it does not show in the drop down box. How can I add programs. I am doing all this in the Autoplay portion of my Control Panel and have Windows Vista Ultimate 64 bit.
View 4 Replies View RelatedI partitioned my new computer 400 gig HD using Vista. It has put 180 gigs in C:, which I can't shrink further. It has 162 gigs available and I would prefer to reduce that to 90 gigs and use 90 gigs elsewhere.
View 9 Replies View RelatedHow to increase the shrink space. I have lenovo Y410. Its hard Drive is partitioned in three parts: 20 GB C Drive - primary drive where i have my OS, one of 117 GB D drive just another partition for data and one more 10 GB for recovery. What i need is to shrink D drive to 107 GB and create a new drive of about 10 GB. but the problem is that disk management says that it can only be shrinked to about 2.6 GB ----So what to do....plz tell me. By the image u can see the disk management system. Its the D drive i need to shrink.
View 4 Replies View RelatedI don't know where to start At the beginning I guess which seems like ages ago but it was only a few hours ago Okay, I wanted to shrink my 650gig C drive down to 85 or so. I read a tutorial on the net about how to do it and they said that you could do it by defragging with Perfect Disk, defragging the System Files with it, and then performing a few other steps which would allow you to shrink C to a lot smaller than the 350 gigs it was originally allowing me to do.
The steps were to turn off hibernation and delete the files, turn off system restore and delete files, and turn off the page file.Then perform a defrag and then a system file defrag on boot up, then shrink.
I did this and then repeated the "rinse, lather, repeat" about 3 times to get my C drive down to 85 gigs and leave the biggest part of my 750gig HD for archiving only. Seemed like a good idea at the time So the Shrink process went well. Each time I did a System File defrag with Perfect Disk, figuring that each time the drive shrunk, it could move the MFT file a little closer in thus allowing for more shrinkability. It seemed to work.
After I got C drive down to 85 gigs, I immediately restarted and re-stored my page file settings to "let Vista manage" it, and re-started System Restore and created a new restore point.
But when I re-set the page file I got the message: "Another page file exists, do you want to replace it with this one?" I said, sure, why not? I have a feeling I should have said no. But I moved on NOW I had a 600 gig unallocated section that I needed to format to NTFS. But Vista Disk Mgmt said I could not format it because I already had the limit of 4 partitions:
1. The EISA drive
2. OS C drive
3. Recovery Drive D - came with the Dell
4. Rip Process Download R - I created with Paragon Partition the other day
then
5. Unallocated - the partition I just created by shrinking C drive with Vista
I knew there was a limit on the number of partitions you could have, which is why I fired up Paragon Disc Manager, which is supposed to do this kind of thing...........
I have tried to Google for a free DVD Shrink Program. They all seem to say they are free, but once you download them they suddenly want $40 to $60. Does anyone have an actual link to a truly free program that you can use to shrink and burn decrypted DVD's so I can back up my collection?
View 5 Replies View RelatedTried the built-in partition mgr but it does not shrink the partition much. Can it use partition magic 8 on it?
View 6 Replies View RelatedSee attached. Cannot shrink the C: drive to create a new partition. using Vista Ultimate 64bit with SP1 refresh 2
View 9 Replies View RelatedI have Vista Home Premium preloaded on a Dell Inspiron 1520 with a 320gb hard drive. I would like to isolate the OS from my data by shrinking the OS partition to 42GB and creating another partition for my data. However, Vista's partitioning utility says the minimum I can shrink the existing partition to is around 176gb. I suspect that even though I have defragged the hard drive, there is some part of the OS that is sitting on the drive out far enough to cause this. I can't verify this because Vista's defrag utility doesn't show you a map of the drive during defrag. Anyone know of a way around this?
View 8 Replies View RelatedI know this is a repetitive topic, but I can not seem to figure this one out. It is a HP Laptop DV9815nr. I do not know much about it as it is not mine, but the problem is the audio was cutting out and now there is nothing. The computer is not recognizing any type of audio device installed. Even in Device Manager, there is no option for Sound, game and controllers. I have tried downloading the driver and installing, but no luck there.
View 9 Replies View RelatedI have just spent all day, literally, formatting and partitioning my 500gb SeaGate Free Agent. As of now, it is 32gb FAT32, and the rest is NTFS. My question is, can I use the Extend/Shrink Volume tools to decrease the maximum capacity of the NTFS format and therefore increase the maximum capacity of the FAT32 format, as I need more than 32gb. If not, how can I achieve this on Vista?
View 4 Replies View RelatedI have a new Dell laptop with a pre-installed Vista Business,and I would like to shift or "slide" its partition forward toward the start of the hard drive by 10GB to make way for a Linux dual-boot between Vista and Linux. (This is not a "shrink" operation.) Does anyone know of a utility that can do this with Vista? Gparted, BootIt NG, and Acronis Disk Director are the traditional utilities which come to mind, but I've heard of difficulties with Vista partitions where the partition was created by the Vista installer. If you've used any of these or other partitions in their "Vista compatible" versions
View 8 Replies View RelatedI have a new Dell laptop with a pre-installed Vista Business, and I would like to shift or "slide" its partition forward toward the start of the hard drive by 10GB to make way for a Linux dual-boot between Vista and Linux. (This is not a "shrink" operation.) Does anyone know of a utility that can do this with Vista? Gparted, BootIt NG, and Acronis Disk Director are the traditional utilities which come to mind, but I've heard of difficulties with Vista partitions where the partition was created by the Vista installer. If you've used any of these or other partitions in their "Vista compatible" versions
View 8 Replies View RelatedMy C: drive is 1Tb in size (931.43Gb), with Used Space of 73.8Gb and Free Space of 857.65Gb. I want to shrink the C: partition down to 200Gb, and use this just for my OS and App files - I'm running Vista Ultimate 64 bit. This would then leave me with a new partition of c. 750Gb for my data files and documents etc. However, Vista will only offer to shrink the C: partition by around 260Gb as a maximum. It will not allow me to select a larger size than this. I've tried turning off System Restore / Shadow Copies, but this makes no difference. Any ideas why this should be, and what can I do? p.s. I've tried using Acronis Disk Director as well, but whilst I can select a new C: partition size of 200Gb, when the system reboots, nothing has changed, so ADD won't work either.
View 4 Replies View RelatedIs it normal for Disk Defragmenter to Analyze the disk AFTER it defragments? I know it does it before and then I click 'Defrag Now' and it proceeds to defrag my hard drive. But today I was watching it and noticed that all of a sudden it stopped defragmenting and the info changed to 'Analyzing disk...'.
View 9 Replies View RelatedI have four (4) hard disks C: D: E: F: all are connected with sata cable and power cable.(of course) The F: is outside from the pc and connected via external SATA and power cable (like usb NOT usb) I know,with USB external hard disk i can use the safely remove option.
Is there any option to safely remove SATA hard disk without Shut Down the pc?
1) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Properties-Policies-UntikDisable the Enable write cashing on the disk??
2) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Disable??
i was messing around with virtual disk programs and made 2 disk drives that are not really there. I can't seem to be able to delete them and its really getting annoying. How can i do this?
View 5 Replies View RelatedIs this normal? My disk cleanup shown me a 257GB of files to delete on my 80GB disk. I haven't local network and no external disk. I am using vista home premium with sp1, but this problem was without sp1 too. I attached link (for better understanding) to picture of cleanup.
View 8 Replies View RelatedI am a relatively unexperienced windows vista user using windows home premium at 32 bit on an acer aspire 6920 notebook. I noticed that occassionaly my disk space would drop dramatically without me doing anything. 100s of mbs would just disappear for no reason, so probably being stupid i decided to run the disk fragmenter to try and fix the problem. BUT to my horror i was shocked to find that the disk fragmenter began to eat up my hard disk space big style. I went from 79.7GB to 72.5GB in just over an hour. What the hell happened and can it be fixed? can i get my disk space back? i thought the disk fragmenter was supposed to help your computer not rob it. does anyone else have this problem and can someone please help me? im kinda desparate, i cant believe it.
View 9 Replies View RelatedMy Disk is split into 2 partitions, Vista (C: ) and Data (E, each is about 70 Gb. I do not use the Data partition. I want to delete it and allow Vista(C to use all 140 Gb. The Help pages suggest that if I delete (or reduce the size of) "Data", the free space becomes unallocated? Can I repartition the disk to allow Vista C: to acces all 140 Gb?
View 9 Replies View RelatedWhen I try to open a disk, the driver ejects it and it says please insert a disk into drive. I tried uninstalling and installing the CD RW DRIVER, but it still doesn't work.
View 5 Replies View RelatedI need to replace my wife's motherboard, and I am trying to minimize the amount of change. She is currently running XP, but the hardware is old enough that I cannot simply swap the MBs, because a new board will need a different HAL. I was thinking about installing XP and migrating applications. I was wondering what would happen if I cloned her disk to a SATA disk and installed a Vista upgrade on top of the XP disk. I would run setup and provide the appropriate drivers at the F6 prompt. She has used Vista on occasion when we are out-of-town. I have a separate userID on my laptop that is configured to look as much as possible like XP. The question is whether a Vista upgrade would work on top of an XP image that used a lot of older hardware.
View 4 Replies View RelatedI have an HP DV7 notebook that I recently added a second SATA 500 GB hard drive in the expansion bay. The purpose of the drive is to serve as a data drive. I also intend to store an image of my system disk on this internal expansion drive so that I can restore my system and apps when I am in the field. For most purposes the drive seems to be functioning normally. However, I recently noticed that, without my instructions, HP Updates were installing suipport files on my expansion disk rather than on my system disk and I have become concerned that Windows Updates may also end up on the expansion drive (so far they appear not to have done this). On further inspection in Computer Management - Disk Managment I discovered that when I put the expansion drive into the 2nd bay, my original system disk was automatically bumped from the Disk 0 position to the Disk 1 position and my expansion disk became the new Disk 0.
In Computer Managment - Disk Management the system currently looks like
Disk 0 - F: Expansion Drive - Healthy, Primary Partition
Disk 1 - C: - Healthy, System, Boot, Page File, Active, Crash Dump,Primary Partition.
If I physically pull out the F: drive from the machine the C: drive returns to the Disk 0 position. I am concerned that my system and application updates are going to get splattered across two drives when I want them to remain on the original C: drive. I can find no way in BIOS or Computer Management - Disk Management to assign the Disk and physically swapping the drives makes the system disk unbootable. Am I at risk of splattering my Window updates across two drives? Should I instruct Vista to regard my system disk C: as Disk 0 and how to I do this?
I've persuaded my boss that I need 16 gig of RAM. The purpose being, of course, to make Vista fly. Is a RAM disk the best way to do this? Can I 'cache' the system disk in a RAM disk? Or is there a better way to make use of my new endownment.
View 6 Replies View RelatedI was under the impression that it was possible to partition a hard disk via Disk Management. I want to split the existing C drive into two drives but when I right click the drive in Disk Management there is no option to do this. Is this not possible in Vista?
View 7 Replies View RelatedI changed the Boot sequence to CD first, then HDD. Everything ran fine and vista seemingly loaded perfectly. After moving some files from my backup drive back onto my main one and installing some drivers, I was asked to restart my computer (for the drivers) so I did. Remembering that the boot sequence was still set on CD first, and since my driver CD was still in the drive, I decided to set the boot sequence back to the way I had it with XP: HDD and then CD. After doing this I quit BIOS and tried to boot, but I kept getting a message saying: DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER.
So I restarted the computer again, this time with my Vista CD in the drive, and again, the computer wouldn't boot and told me to enter a boot disk. Not knowing what to do, I went back into BIOS and changed the boot sequence back to CD first, then HD. After doing this, and restarting with the Vista CD in the drive, my computer booted up with no problems whatsoever. I tried reinstalling Vista (twice), reformatting the target hard drive, changing the boot sequence around, pretty much everything I could think of......