Wont Boot - New Build ?
Aug 30, 2007
I'm sry if i'm such a newb and all. But i think i installed evertying correct. Well becouse everything turns on all lights work, and it beeps, which indicate everything is working correctly. But then it goes through post so called and of course since it's a new build i have no operating system on it. Well when i try to put the cd in i can see the disk reading it but it just says DISK BOOT FAILURE. INSERT SYSTEM DISK & PRESS ENTER. Well i got into the bios and tried the priority thing put cd rom first then it restarted still the same thing so then i went back into bios and put defualt settings were 1st floppy and 2nd hardrive and 3rd cd-rom. So i'm not realy sure wut do to
View 9 Replies
ADVERTISEMENT
Mar 18, 2006
possible for me to build a boot cd like BartPE cd, or Ultimate Boot cd, or 911cd, or make Windows bootable through my flash drive (through BartPE) when my Toshiba laptop came with Win XP Home SP2 preinstalled and an OEM recovery dvd, but not a separate Win XP Home SP2 installation cd?
View 5 Replies
View Related
Mar 31, 2007
How to build a Wondows XP Boot with preinstalled softwares usin nlite.if i install xp (bootable) then it should alsoinstall winamp and winzip etc along with the os how to do this..
View 4 Replies
View Related
Jun 25, 2005
I have just built a new PC from new components. It boots into BIOS fine and detects all the drives - SATA HDD and CD. I have set up CD as boot drive, and installed the XP Pro disc. It immediately puts message "Setup is inspecting your hardware configuration..." and then just sits there doing nothing. I have left it for a long time so far but nothing is happening. This is repeatable. Do I need to do something different eg load drivers from a floppy or is there a problem with my hardward set up?
View 11 Replies
View Related
Oct 8, 2008
I have been running windows XP SP3 and have been happy with it. But I was going to go with Vista on the new bulid (I can get it at a student discount) in order to have a 64-bit OS and have better access to memory. But this week's news has me convinced that I should should stick wiht XP until Windows7 comes out.
I do moderate gaming and lots of multitasking (many open windows, ITunes pumping to my home stereo, etc.)
So, here is are my questions:
-Is windows XP 64-bit even available anymore?
- If so, is it worth it to install the 64-bit version? (will the diferences even be noticable?)
View 8 Replies
View Related
Mar 21, 2005
I just got a new custom computer with a ECS Kt600 Mb, AMD 2200 XP, Maxtor 80gb hdd, 512mb pc2700. Everything work great but when I tried to hook up my HP V40 all-in-one printer (USB cable), it will not recognize it at all. I changed cables but to no avail. I checked the ports and it recognizes my pen drive when I plug it in.
View 3 Replies
View Related
Apr 18, 2007
going to build a new PC and need a windows disc...was going to get a windows home edition......is it available in 64 bit version???if not what should i get...(NOT VISTA!)
View 15 Replies
View Related
Oct 20, 2004
i just built a new pc but when I try to install xp pro it wont load. I installs just fine but when it tries to boot for the first time the screen goes blank when the splash screen is supposed to appear. here is my setup let me know what you think Black antec server tower w/ 450 watt smartpower p Abit ic7 g maxII advance mobo bios rev 21 I think P4 3.0 800 fsb 512 L2 Thermalright 947u h/s w/ 92mm vantec tornado 1 gig Kingston hyper x pc 3200 (512X2) Dual Channel Evga geforce 6800 gt 256
View 13 Replies
View Related
Aug 13, 2007
I am wanting to use 32-bit XP pro on my new build but cannot get it to install.
This is to avoid dealing with XP x64 driver searches and I do not want to lose netmeeting and msconfig so I refuse to convert to Vista just yet.Also, I am not completely convinced my build is Vista ready.The 32-bit XP install BSODs after doing "loading all the setup files".I have ACPI set to DISABLE.The APIC option in the BIOS is unselectable and is set to ENABLE.
No, there are not any BIOS updates available for my MOBO.Yes, I ran memtest86 and had 0 fails on multiple passes.Yes, I tried default BIOS settings.Yes, I tried Fail-Safe BIOS settings
View 6 Replies
View Related
Sep 2, 2004
Here is an very easy way to remove the build number from your desktop. Just follow the directions below to remove it.
Right click on the desktop
Expand arrange icons by
Click on lock items to desktop
The build number will be gone
View 9 Replies
View Related
Apr 28, 2005
i'm new on this forum but i've been reading the posts around for a while.. right now i need help with my computer. i installed windows xp pro sp2 beta (5.1, build 2600) and now i need to remove this sp2 cuz it's screwing up my directx... i cant install directx 9.0c as the installation just goes extremely quickly and nothing actually was installed... after hours of searching i concluded that it was the beta version of sp2 that was causing the problems. the sp2 was slipstreamed (i think) with xp on the disc so i cant uninstall it using add/remove programs, i cant find C:WINDOWS$NTServicepackUninstall$ or anything like that, and i after removeing CSDVersion in HKLMSoftwareWindows NTCurrent Version, it was just backed up.
View 6 Replies
View Related
Jan 16, 2005
Feels that desktop icons take more and more time to build up (got the sand thing running for 20 secs). Any tricks to stop that?
View 2 Replies
View Related
May 10, 2007
New system build has a 320 gig Sata drive, 965 chipset. I have no floppy!I have slipsteamed SP2 and created a new install disk I checked it in old system it boots.The Gigabyte manual says I will need a floppy to install to a SATA drive.What options do I have one thing I am considering is installing on my old 80 gig IDE drive, then, after installing the chipset drivers and such, install the SATA and image the IDE drive to the SATA.
View 6 Replies
View Related
May 14, 2008
I reformat the drives and during the XP Home Discs process of copying files for the installation, the process freezes the system anywhere from 11% at driver.cab to 54% at some random file (i didnt take note). I have tried 2 different XP home Discs (both legal etc.) and two different disk drives, though both are new. and still it is yielding the same result. I have also tried loosening the ram timings to 5-5-5-15 (they are rated at 4-4-4-12). No luck and this is beggining to wear me down.
View 2 Replies
View Related
Aug 12, 2002
Here is an very easy way to remove the build number from your desktop.
Just follow the directions below to remove it.
Right click on the desktop
Expand arrange icons by
Click on lock items to desktop
The build number will be gone. However, you will loose the transparent
text background but most of us can live with that.
View 9 Replies
View Related
Oct 23, 2008
I have tried three times to install SP3, (winxp) mob asus M2V-MX, cpu AMD Athlon (tm) 64 x2 dual core processor 4400, each time I get right to the end of the install and it says access denied, I disabled my anti-virus and firewall and tried to install it in safe mode,
but I still get access denied, and each I have to do system restore to my pc to get back to how it was
I got in touch with microsoft and this what they want me to do, but to be honest I don't trust them I don't want to mess my system up, so would you please have a look at what they have sent me.
View 10 Replies
View Related
Jul 22, 2009
1) While I originally started with XP SP2, now I have a XP SP3 CD, with the SATA drivers successfully incorporated via nLite. SAME PROBLEM, even with the BIOS and XP Setup recognizing the HDDs on SATA ports instead of IDE channels.
2) I downloaded the Windows 7 Beta 64 bit, got thru the install to the point of "Updating Registry" and then the system lost power as with XP and did a soft restart.I am currently downloading to Ubuntu Linux to see if that also fails, at which point I definitely know I have a hardware issue. The question is: Which component? I am leaning towards PSU, with mobo in second. Please any insight from the pros would help.
View 13 Replies
View Related
May 24, 2005
The recovery disk that came with my machine is now well out of date and I want to make my own, with all the latest drivers etc. I am running XP SP2 but XP came as an OEM inbuilt provision. The manufacturer (Tiny Computers) will not release a copy of the XP disk to me unless I pay the full XP price!
View 2 Replies
View Related
Sep 15, 2007
I have a optical disk from my old build and 1 ide hard disk with xp installed.
I have tried booting from the ide hard disk with xp installed but when the xp loading splash screen is about to come a BSOD appears and it restarts. I can't read the BSOD as it goes to fast and i can't stop it.
Used the hard disk back with my old system and there is no problems, everything runs fine.
I have tried using 1 ram stick, both sticks, ram in different slot, every configuration i could think of. But i still have the problem. Tried the ram on a different system and it is fine. i can't get to run xp on this new system.
View 6 Replies
View Related
Jun 1, 2008
I'm building my first system from scratch, and have done fine up until the XP installation. This is by far the first XP installation I've done, so thought it would be a breeze. Not turning out that way.
It runs like normal until it gets to the part where it restarts and is supposed to resume/complete the installation. When it boots back up, it goes right back to the original Setup screen (Enter for setup, R for repair, etc). I've tried re-installing numerous times
View 3 Replies
View Related
May 12, 2010
I have built a new computer with an Athalon IIx. Unable to install OS (XP), I have tried 3 different had drives, but unable to complete the install.
View 2 Replies
View Related
Mar 16, 2008
My system was working fine until I installed XP SP2. I am having trouble with a Blue Screen Error "DRIVER_IRQL_NOT_LESS_OR_EQUAL" I believe NVGTS.SYS is the culprit ? I have had to boot in safe made with network to come here to try and get help. Can someone please give me a suggestion as to what might be the issue? I am trying to install this on a new system build, Intel Core 2 Quad Q6600 2.4 GHz, EVGA NForce 780i SLI, 2 gigs of OCz DDR 2 800, Nvidia 8800GTS (G92) 512mb 256-bit GDDR3 PCI-E 2.0 x-16, WD 74 gig Raptor, Liteon 20X DVDR. Thank you~David
View 4 Replies
View Related
Feb 4, 2009
I have recently built a gigabyte 770 modo with SATA harddrive. When I try to reboot with the XP cd to intall, everything went fine but when the system restart in harddrive, it is giving me disc error.
View 2 Replies
View Related
May 7, 2010
When attempting to install certain packaged software it will fail or in some cases bring up the Windows Installer information window.We have noticed that it appears to happen when an installer, EXE or MSI relies upon transforming a further extracted MSI with an MST file.This only occurs if the files are attempted to be extracted to the root of the temp folder. The files are not created hence cannot be run. The Windows Installer information window will appear if you attempt to run msiexec pointing to a file that does not exist.
View 6 Replies
View Related
Sep 15, 2005
my windows version and "xp service pack" and build number is sitting on the left hand corner of my dekstop. i can't get rid of it. why is it there?
View 7 Replies
View Related
Dec 15, 2007
I had a Dell with XP Media Center Edition on it and I am going to make a new build. My question is, can I use the XP Media Center RECOVERY CD that came with the dell if I were to have a new CD KEY?
View 1 Replies
View Related
Sep 26, 2006
I tried the net but couldn't find the info so I am turning to you guys. How do I make nt server in to a promary domain server?
View 5 Replies
View Related
Nov 11, 2006
I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
View 1 Replies
View Related
Dec 17, 2007
I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
View 9 Replies
View Related
Jun 10, 2007
first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies
View Related
Apr 22, 2010
How can I Reboot and select proper boot device or insert boot media wnidows xp without cd.It is possible.
View 1 Replies
View Related
