I am trying to install xp onto my new hdd. it goes through the formality of formating then it starts to copy files from cd to my hdd then all of a sudden it cant copy files. it is random(not a particalar file) some times at 5% 20% 80% ect:..but i can install winme no problems..then i try to install xp over the top of winme and i get the same problem..I have even taken my copy(originall) of xp to my friends and it installs with no problems at all..then i have taken their disk drive back to my machine, connected it and xp boots up with my motherboard..all is ok...but, when i do a fresh install with xp on their hdd i get the same problem..no settings in bios have been altered in anyway..
So I have a laptop without a CD drive and I've done this before so I know it came be done, just can't seem to find the googled page that i found last time with the how to. I want to take the laptop HD out and put it into a USB mobile disk enclosure, then from my desktop in my windows xp RUN command I wanna set the XP CD in the drive to copy all its install files to the blank HD and start the XP installation but NOT RESTART after its done. Then take the HD out of the enclosure, pop it back into the laptop, boot up and have the install do the rest from there.
Have a laptop that i got in 2003 and i bought microsoft office pro with it. well my laptop is having problems and i have an extended warranty on it, the company said that the harddrive might have to be formated and i should backup everything. since my laptop didn't come with office and the cd got lost with the move to college, is there a way to copy the office program files? what im talking about is how with a game you can copy the folder .programs files/ea games/need for speed. like that and if you copy that folder to another computer it will work without having to be installed. i know its not in the registry.
My computer didn't come with an XP CD, just the manufacturer's restore CD which will wipe out all I've done in the last four years. So, if I backup (copy) all the files on my C drive, except the Windows folder (assuming that's where all the OS files are), to an external drive, then run the restore CD which will revert the computer back to the way it was when I bought it. Then download and install SP2 and copy the original files back to C.
I had bought several hard drives as is, hoping one of them would work. thought I had one, but turned out I couldn't install XP onto the disk, wouldn't copy any files. so I pretty much cut my loss on the drives and removed it the bad one from pc. now I get 2 options when booting windows. my original xp install, and the 2nd install that still needs to complete, how can I stop it from wanting to install xp again from the boot file and keep the original settings as they were?
can I stop xp from trying to install an old programme? which doesn't work and I can't delete? I have a copy of roxio media creator which doesn't work since I reset windows to an earlier point, the prog can't find a certificate and questions the system date so won't install. it won't delete either for the same reasons and every time I try to copy files it tries to install the damn thing, unsuccessfully
Windows xp pro and discovered that it is a pirated copy. I want to get rid of it and install my valid copy of 98se. do i format my hard drive i do have files i want to keep.
The registry on one of my computers is corrupt and if I try to copy the files from the WindowsRepair folder using the windows system repair tool, I'm told the files cannot be found. One possible solution I thought of is using the registry files from my other computer running Windows XP. I don't even know if this is possible, but if it is, how can I transfer the files. I would put them on a CD but the CD drive won't open when the system repair tool is running, and they're too big to fit on a floppy disk, even one at a time (the system and software files are both over 2mb.)
For some reason when i validate my XP it says its some kind of company copy or something and wont let me install SP2. Is there anyway of just downloading it and manually installing it
Its time for me to rebuild the old machine and i started looking for a guide i once saw on here (TG) which showed you the best way to install a clean copy of XP on a new machine.
I need to copy all files on a local drive to a network drive once a week. I want to be able to do this using a batch file that I can have Windows scheduler execute. This means the use of the Windows Backup utility is not possible. However, program suggestions that have a cloning ability with no compression and does not create its own file can be used.
I've been troubled by viruses and trojans on an older computer (Pentium4) and decided to reinstall XP from the disc to see if I can "start over". I have another primary computer, so it doesn't hurt me to lose all the files etc. I'd rather start with a clean slate. Anyway, the XP install from the disc with SP1 went fine. Then I installed SP2 per the request of the windows update monitor. The install proceeded fine until a copy error occurred.Copy Erro Error occurred while copying file sprb0414.dll.Cannot copy file to directory.
I have just started experiencing this problem after installing a new backup hard drive. I am searching a large folder of mp3 files to copy to my mp3 player.Periodically and seemingly at random the folder I am searching through resets.That is it blinks and shifts back to the top of the folder.So I then have to remember where I was and find the place that I left off.
I'm using an SD card for a Palm Pilot T|X and I'm copying files back and forth frequently using an SD reader, but I'm starting to get a couple of error messages (in XP, not on the actual Palm) while copying files FROM the SD card (not TO the card, I'm copying TO the card just fine). For example, if I copy specific mp3 files, I get this error message- Cannot Copy *filename*: The parameter is incorrect. The weird thing is that only certain mp3 files do this while others copy just fine. The weirder thing is I can play the file in Winamp directly from the card just fine. Yet other messages pop up with different files. Sometimes I get that specific message with another file, but I also get this one--
Cannot copy *filename*: Cannot read from the source file or disk I've noticed that the first one is far more common than the second. I've also noticed that the second can be fixed by safe-removing the SD card and reinserting it (up until now, I haven't been safe-removing, which I now suspect may be the source of the problem). I've also noticed that I can't copy files from my card to my Palm's internal memory using FileZ, but that may be unrelated (also, I know that this isn't a Palm forum anyway; I'm mainly asking about my problem within XP).
If I access "My Pictures" on WXP, I can copy pictures to a CD-RW without any problem. If I try to use the "Copy" command to copy a folder such as my Quicken Data files, I receive a message that the disc is not formatted or it may be corrupted. If I use the disk "that may be corrupted" I can copy pictures to it and then erase them. Why won't data files copy? Am I going about it the wrong way?
When I try to copy files to a DVD+RW it puts them into some kind of temporary files and then tells me it's ready to copy them to the CD. But it won't let me copy them to a DVD, seems to be looking for a CD. Why must I wait for these temporary files to be created. I was once able to start the copying and it would copy them with no delay. Is there some way to bypass this creation of temporary files and just begin the copying immediately?
I have erased my hard drive and was reinstalling xp pro.when it is copying install files i keep getting messages that certain files did not copy correct, and I can skip them but xp probably won't work.After several attempts, I just started skipping all the files and xp was on the hard drive, but when logged on it would crash.I have tried using different copies but i get same message about files aren't being copied correct.
I had to install new hard drive.The only way out now, is to install a brand new copy of XP Home or Professional.I do not need the box/manual etc so I thought I could buy a cheaper copy OEM. But when I went to Amazon it said the OEM was not for a consumer, only system builders.Can anyone explain what problems I might encounter if I installed a OEM version (as funds are very tight - OEM would help out a lot).Or does anyone know of a version of XP that you can buy without the box etc (just the CD), that is for a home user.One other question - will my motherboard except a new version of XP(does it know that I am changing the "Product Key" etc).
I turned on my computer today and everything's messed up. I'm running windows XP on a Sony Vaio (about 6 yrs. old). I have 2 separate CD drives, and my computer won't recognize them. Sometimes when I restarted it'd recognize one of them. When I'm in the BIOS screen it only shows 1 CD drive. I can't copy or backup files; I wanted to backup so I could revert back to factory settings. I also can't install or uninstall anything. My anti-virus program (McAfee) says it has updated, but when I run a scan it says my definitions are 5 months out of date. It suddenly takes a really long time to boot up.
its a brand new computer and only a month old. Windows XP Professional keeps on restarting itself for no reason. I tried to get into safe mode but it also restarts the computer before the OS can be loaded. It's the main business computer that keeps all my employee numbers and payroll accounts. Is there a way to reformat the computer without losing my precious data?
I get an copy error, when trying to install windows components from control panel add/remove windows components. I have the right win xp sp2 cd in running and it says it cant find a specific file its looking for, but then when i click browse i see that its there in the cd the exact file i double click it and it doesn't recognize it or something again what can i do about this?
I have old backup of favorites (bunch of *.lnk files) from Internet Explorer that i had on cd and forgot about it. Then i formated my pc and had to start over collecting them. Now after year i find out my old favs was on backup cd and i want to merge my old favorites with my current ones, the problem is there is about 100 links in old folder and about 200 links in current folder and many of them lead to same sites, i dont wanna have duplicates and i dont wanna sort them manually.
Is there prog that can copy file from one folder to another, checking if each file from source folder is not present in destination folder (and subfolders) under different name (by checking size or crc or md5 whatever)?
Or prog that can check which of files from source folder (without subfolders) are same as files in destination folder (without subfolders) and mark them to delete or move or smooth
i have lots of photos that i need to back up but how do i do it? im pretty good with pcs but all i want to do is back up all my pics to cd were by inserting one after the othe untill they are all full i have nero but when you have filled one disc (multisession)and want to continue you cant as it doesnt know were to back up to/from. i used to us back up lit may moons ago but no more any help would be nice. its a pane in the asre when you have to keep note of the file you got up to before you can follow on with another disc. im using xp home
I have a computer that I need to wipe the hard drive and perform a fresh install on.I'ts a windows xp pro os that is pre windows service pack 2 and I don't want to spend the next twenty years downloading all those windows critical updates again.So my question is: Is there a way to legally copy all those update files on a cd or is there a way to make things easier for me by getting them by some other method?
I'm running Win XP Pro SP 3, I have a file that I periodically copy to several different computers on a LAN. The exact destinations of the file change occasionally and I want to minimize the amount of maintenance involved when there is a change. In the folder containing the file I have a shortcut to each of the destination drives. When one of the destination folders changes I update the shortcut in that folder. If I drag the file to each of the shortcuts using the right mouse button one of the options is to copy the file to the target of the shortcut, so one way to copy the file is to manually drag it to each shortcut. Is it possible to achieve similar functionality with a batch file? It is easy enough to write a batch file that copies the files to each destination by coding the destinations into the batch file but is it possible to use a batch file to copy the file to the target of each shortcut? I suspect that parsing the .lnk files is complex but I don't know if there is another way to do this.
I am trying to get files off of a computer that has an IDE raid setup.The IDE Raid is on the motherboard and I have all the drivers. Win XP is installed but will not boot.I have tried many of the MS fixes that deal with XP stopping during the boot up. Frankly I do not care about getting XP to run again on this system, but I do need some files as the owners did not back up their files.I used the XP CD to boot up the computer, F6 to enable raid and gained access to the hard drive.I installed a second IDE drive in the computer to transfer the files to. Everything seemed fine. I could see both drives, look at any directory and so on. However, I was not allowed access to copy any files, make any directories, etc. Just to get to the raid drive in the first place I had to enter the admin, so shouldn't I have had permission on both drives? I also wanted to try just booting to a command prompt, but had no access to the raid drive that way.I tried UBCD Win XP to no avail for the same reason, no drivers for the raid so it just wasn't there.
I initially had a problem with java after installing a SP2 update for IE. And eventually reinstalled XP, that didn't correct the issue and then I had to get a new product code because I was in the "you have 30 days to activate" loop even though my copy of XP was already activated.So called Microsoft, got new product key and started to install again. This is when I first got the "Unable to copy files" error. I tried 2 different copies of XP but got the same issue, with the same files, with each disk.I've talked to Microsoft for hours, and finally had a guy tell me it was my motherboard (now this is after having swapped out my memory with the manufacturer). I just received my replacement board (M7NCD by Biostar) and I am still getting the same error. The gist is that at the dsound3d.dll, I start to get "unable to copy file" errors. I attempt to retry the copy, which works occasionally, but eventually I get an error (normally a memory error) Microsoft had said that even with those errors, it wasn't my memory but my motherboard that was the issue
It boots to either Win 2000 or XP Pro. I run XP most of the time. Updates been coming in everyday. It won't install SP2 because the copy of Windows "may not be valid". Any way to get around this garbage?
