I am trying to get files off of a computer that has an IDE raid setup.The IDE Raid is on the motherboard and I have all the drivers. Win XP is installed but will not boot.I have tried many of the MS fixes that deal with XP stopping during the boot up. Frankly I do not care about getting XP to run again on this system, but I do need some files as the owners did not back up their files.I used the XP CD to boot up the computer, F6 to enable raid and gained access to the hard drive.I installed a second IDE drive in the computer to transfer the files to. Everything seemed fine. I could see both drives, look at any directory and so on. However, I was not allowed access to copy any files, make any directories, etc. Just to get to the raid drive in the first place I had to enter the admin, so shouldn't I have had permission on both drives? I also wanted to try just booting to a command prompt, but had no access to the raid drive that way.I tried UBCD Win XP to no avail for the same reason, no drivers for the raid so it just wasn't there.
i have 2 western digital 80gb on raid0. on this array i have installed windows 7 and now i want to install windows xp on another partition.the problem is that windows xp setup won't recognize my array even with the original raid driver floppy-disk. i created even an nLite customized xp with those drivers installed and it doesn't work.
Got a question conserning the boot files on my windows XP Pro,Raid setup.There are no boot files on the C: of my raid o setup.I just created this setup , I have 2 80 gig drives and partitioned them to C: & D: ,The boot files apear on my D: ,(Raid storage drive).Is this normal ? Why does windows put the boot files on D:, does this always happen in a raid setup?
We have 7 computers at our business where I want to place some files on one of the newer ones and let the others simply access them. However, the newest computer is running Win7 64-bit pro. Some of the other computers are just Win XP pro 32-bit. If I setup a "Work Network" on the Win 7 computer where the files are located, will I be able to find them on one of the Win XP computers? Hope I am being descriptive enough. Sorry if I'm not.
I am running windows xp sp2. My primary computer seems to have had a motherboard meltdown. Left on thursday, would not boot on friday. Cannot get to cmos, or anything. I removed the harddrive and put it in another computer to get work files off of the drive and transfer them to server. On boot it says"error loading operting system".I hooked up the hard drive as a slave and used explorer to go through and get the files. I can see the Desktop directory in documents and settings****desktop, but i get an access denied when i try to get to the files on desktop. I have tried using the Dos Command prompt and have the same result. I have booted in safe mode w/ prompt, same results. I have tried making a user profile with same name and passwords, no luck. These are files on the desktop, not shortcuts. Does anyone know how i can copy these files?
I bought a DELL labtop Inspiron 5052 over two years ago. It got XP Home version. A couple of weeks ago, a cup of coffee was spilled on my laptop. I took it to a computer shop. They contacted Dell and tried to order the labtop motherboard but to no avail as Dell has discontinued manufacturing this type. The warranty is only 1 year. So I decided to use it for spare parts. What 's an expensive cup of coffee ($3500.00). After removing the hard drive (60Gb) from the labtop, I made it as an external USB type hard drive. It was a perfect solution as at least I can save the data. But the fun was a short one as I now experience something to do with 'file access'. Connecting the external hard drive to my PC, I can see all the files and folders on it. The problem is on my Dell laptop I have 2 users setup under Document and Setting. One of the user logon (userA) enforces password while the the other (userB) enfoces no password for logging on. I can open files from userB with no problem but can not open files or folders from userA. It says "Access denied" or "file inaccessible". Is there a way to overcome this ?
I am using Windows XP and have two hard drives. Until recently I had Windows installed on one hard drive and all my important files (photos, business files, videos, etc) were also on this drive. My other hard drive was completely empty. Suddenly I started encountering problems with Windows and while I was using Windows it would completely freeze. I would pull the plug on the computer and start it again and then it would be fine - for a few hours - and then it would freeze again. The problem started happening more often and more quickly after rebooting and interestingly I noticed over the course of a few days that the problem seemed to be worse whenever my heater was turned on. I left the heater turned off and didn't encounter a problem again for a couple of days, but then it started happening again and more often even while the heater was turned off. I figured because there seemed to be a correlation with the heater being on and the computer's performance that the fans or the power supply inside the computer were over-clogged with dust. I opened up the computer and thoroughly cleaned out all the dust I was able to and made sure all the fans were dust-free. It didn't help. The computer's condition continued to deteriorate and occasionally when I attempted to re-boot the computer it would completely freeze before getting to the Windows boot screen or it would display the following message.
Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information. Over the next couple of days the computer wouldn't get to the Windows loading screen at all and it would only boot to the point of displaying the aforementioned message.I took my computer to my friend's house to see if he could fix it. He said that some of the boot.ini files in my version of Windows were damaged or I had accidentally deleted them somehow. Because I was completely unable to load Windows there was no way to do a System Restore so he came up with an alternative plan. He decided to load a new Windows XP onto my other hard drive and use that drive as my master. He said even though Windows was loaded onto the first drive, I would be able to access the files from it with the new Windows in Windows Explorer. So he did it but then we encountered a new problem. The new Windows works fine but for some reason I am unable to access the files from the other hard drive. I think this is because my original Windows had a password on it. When I used to load Windows you had to type a password to login as me and access my files. Otherwise you could only be a guest. But now when I try to access these files an Error message comes up saying these files cannot be accessed. It doesn't even give me the option to type a password.So basically what I want to know is this: Am I able to recover these files from my original hard drive. I really need them for my business and I have five years of family photos on there that are of high sentimental value to me.
My computer came down with a nasty virus that I didn't want to deal with anymore, all the computer would do was constantly reboot, could never get to log-in. So I bought a new HD (which I really wanted anyway ) with intentions of loading new OS on the new drive and using the old drive as a slave, and after copying all the files I needed off the old drive I was going to reformat it for storage. Everything worked out fine except on the old drive I had a separate password protected admin login named Billybob where I kept all my important work files. I also used the sharing and security function to protect Billybob from access from other users. Now I can't access the files myself. I can only access the files that were in the 'Guest' profile that wasn't password protected. When I click on or try to move the files in Billybob I get the 'access denied' message. I used the HD utility program that came with my new HD and it allowed me to actually move the files on to the new HD but the files are still protected when I try to open them. Any help on this would be REALLY appreciated as I have over a years worth of technical work stuff in Billybob that I will never be able to replace.
I had my hard drive transferred to a new pc. I cannot access the numerous (and important!) files under Documents and Settings/My Username on the new pc. Apparently, Windows has restricted access to those files since it does not recognize me on the new PC. The files all seem to be there (based on the info from the properties of the documents and settings folder), but I cannot see them. Both old and new pc use XP Home.How can I regain access to these files?
The registry on one of my computers is corrupt and if I try to copy the files from the WindowsRepair folder using the windows system repair tool, I'm told the files cannot be found. One possible solution I thought of is using the registry files from my other computer running Windows XP. I don't even know if this is possible, but if it is, how can I transfer the files. I would put them on a CD but the CD drive won't open when the system repair tool is running, and they're too big to fit on a floppy disk, even one at a time (the system and software files are both over 2mb.)
I need to copy all files on a local drive to a network drive once a week. I want to be able to do this using a batch file that I can have Windows scheduler execute. This means the use of the Windows Backup utility is not possible. However, program suggestions that have a cloning ability with no compression and does not create its own file can be used.
I have just started experiencing this problem after installing a new backup hard drive. I am searching a large folder of mp3 files to copy to my mp3 player.Periodically and seemingly at random the folder I am searching through resets.That is it blinks and shifts back to the top of the folder.So I then have to remember where I was and find the place that I left off.
I'm using an SD card for a Palm Pilot T|X and I'm copying files back and forth frequently using an SD reader, but I'm starting to get a couple of error messages (in XP, not on the actual Palm) while copying files FROM the SD card (not TO the card, I'm copying TO the card just fine). For example, if I copy specific mp3 files, I get this error message- Cannot Copy *filename*: The parameter is incorrect. The weird thing is that only certain mp3 files do this while others copy just fine. The weirder thing is I can play the file in Winamp directly from the card just fine. Yet other messages pop up with different files. Sometimes I get that specific message with another file, but I also get this one--
Cannot copy *filename*: Cannot read from the source file or disk I've noticed that the first one is far more common than the second. I've also noticed that the second can be fixed by safe-removing the SD card and reinserting it (up until now, I haven't been safe-removing, which I now suspect may be the source of the problem). I've also noticed that I can't copy files from my card to my Palm's internal memory using FileZ, but that may be unrelated (also, I know that this isn't a Palm forum anyway; I'm mainly asking about my problem within XP).
I am trying to install xp onto my new hdd. it goes through the formality of formating then it starts to copy files from cd to my hdd then all of a sudden it cant copy files. it is random(not a particalar file) some times at 5% 20% 80% ect:..but i can install winme no problems..then i try to install xp over the top of winme and i get the same problem..I have even taken my copy(originall) of xp to my friends and it installs with no problems at all..then i have taken their disk drive back to my machine, connected it and xp boots up with my motherboard..all is ok...but, when i do a fresh install with xp on their hdd i get the same problem..no settings in bios have been altered in anyway..
If I access "My Pictures" on WXP, I can copy pictures to a CD-RW without any problem. If I try to use the "Copy" command to copy a folder such as my Quicken Data files, I receive a message that the disc is not formatted or it may be corrupted. If I use the disk "that may be corrupted" I can copy pictures to it and then erase them. Why won't data files copy? Am I going about it the wrong way?
When I try to copy files to a DVD+RW it puts them into some kind of temporary files and then tells me it's ready to copy them to the CD. But it won't let me copy them to a DVD, seems to be looking for a CD. Why must I wait for these temporary files to be created. I was once able to start the copying and it would copy them with no delay. Is there some way to bypass this creation of temporary files and just begin the copying immediately?
I have erased my hard drive and was reinstalling xp pro.when it is copying install files i keep getting messages that certain files did not copy correct, and I can skip them but xp probably won't work.After several attempts, I just started skipping all the files and xp was on the hard drive, but when logged on it would crash.I have tried using different copies but i get same message about files aren't being copied correct.
I have old backup of favorites (bunch of *.lnk files) from Internet Explorer that i had on cd and forgot about it. Then i formated my pc and had to start over collecting them. Now after year i find out my old favs was on backup cd and i want to merge my old favorites with my current ones, the problem is there is about 100 links in old folder and about 200 links in current folder and many of them lead to same sites, i dont wanna have duplicates and i dont wanna sort them manually.
Is there prog that can copy file from one folder to another, checking if each file from source folder is not present in destination folder (and subfolders) under different name (by checking size or crc or md5 whatever)?
Or prog that can check which of files from source folder (without subfolders) are same as files in destination folder (without subfolders) and mark them to delete or move or smooth
i have lots of photos that i need to back up but how do i do it? im pretty good with pcs but all i want to do is back up all my pics to cd were by inserting one after the othe untill they are all full i have nero but when you have filled one disc (multisession)and want to continue you cant as it doesnt know were to back up to/from. i used to us back up lit may moons ago but no more any help would be nice. its a pane in the asre when you have to keep note of the file you got up to before you can follow on with another disc. im using xp home
I have a computer that I need to wipe the hard drive and perform a fresh install on.I'ts a windows xp pro os that is pre windows service pack 2 and I don't want to spend the next twenty years downloading all those windows critical updates again.So my question is: Is there a way to legally copy all those update files on a cd or is there a way to make things easier for me by getting them by some other method?
I'm running Win XP Pro SP 3, I have a file that I periodically copy to several different computers on a LAN. The exact destinations of the file change occasionally and I want to minimize the amount of maintenance involved when there is a change. In the folder containing the file I have a shortcut to each of the destination drives. When one of the destination folders changes I update the shortcut in that folder. If I drag the file to each of the shortcuts using the right mouse button one of the options is to copy the file to the target of the shortcut, so one way to copy the file is to manually drag it to each shortcut. Is it possible to achieve similar functionality with a batch file? It is easy enough to write a batch file that copies the files to each destination by coding the destinations into the batch file but is it possible to use a batch file to copy the file to the target of each shortcut? I suspect that parsing the .lnk files is complex but I don't know if there is another way to do this.
I initially had a problem with java after installing a SP2 update for IE. And eventually reinstalled XP, that didn't correct the issue and then I had to get a new product code because I was in the "you have 30 days to activate" loop even though my copy of XP was already activated.So called Microsoft, got new product key and started to install again. This is when I first got the "Unable to copy files" error. I tried 2 different copies of XP but got the same issue, with the same files, with each disk.I've talked to Microsoft for hours, and finally had a guy tell me it was my motherboard (now this is after having swapped out my memory with the manufacturer). I just received my replacement board (M7NCD by Biostar) and I am still getting the same error. The gist is that at the dsound3d.dll, I start to get "unable to copy file" errors. I attempt to retry the copy, which works occasionally, but eventually I get an error (normally a memory error) Microsoft had said that even with those errors, it wasn't my memory but my motherboard that was the issue
Just wondering if anyone knows of a program that will copy files and folders along thier permissions.I came across the Scopy stuff on M$ but just wondering if there is a easier way
So I have a laptop without a CD drive and I've done this before so I know it came be done, just can't seem to find the googled page that i found last time with the how to. I want to take the laptop HD out and put it into a USB mobile disk enclosure, then from my desktop in my windows xp RUN command I wanna set the XP CD in the drive to copy all its install files to the blank HD and start the XP installation but NOT RESTART after its done. Then take the HD out of the enclosure, pop it back into the laptop, boot up and have the install do the rest from there.
so i have a epson picturemate(personal photo lab) and i have it installed but everytime i put the memory card in it so i can copy the photos to my computer, the screen that asks me what i want to do (copy files to folder..view..etc.) doesnt show up anymore and i want to know how i can get that back so i can save my photos to my computer..it use to show up before i got internet and now it does not..
Just tried to install windows on my new build,first one I've tried by myself.Everything seemed to b ok,when prompted to hit f6 I did.Nothing happened.Windows said to hit reset,I did.It started to copy files for a short while then displayed error code OXOOOOOO7B (OXF7C7A524,OXCOOOOO34,OXOOOOOOOO,OXOOOOOOOO) What now ,do I need to clear(RTC) RAM in CMOS b4 starting over?
Have a laptop that i got in 2003 and i bought microsoft office pro with it. well my laptop is having problems and i have an extended warranty on it, the company said that the harddrive might have to be formated and i should backup everything. since my laptop didn't come with office and the cd got lost with the move to college, is there a way to copy the office program files? what im talking about is how with a game you can copy the folder .programs files/ea games/need for speed. like that and if you copy that folder to another computer it will work without having to be installed. i know its not in the registry.
I want to copy files from my hard drive to my dvd writer.InCD screws this up.I want to be able to open windows explorer and move/copy]selected files to a dvd. I then want to be able to read the files direct from the dvd using windows explorer.
I have been trying to delete pics. When i press control and click on each pic to delete a bunch at one time, I get copies of the files im trying to highlight. I thought I was clicking on create shortcut, but it is creating a copy of all I have highlighted even before I get to the delete menu.
