Windows Pro Will Not Boot Past Welcome Window
Mar 31, 2005
I have a winbook Si2 that i recently put XP pro on it worked fineat first after a few days it would not boot up past the windows blue welcome page the same thing happens in safe mood.how can i get it to boot to the desk top?
View 13 Replies
ADVERTISEMENT
Dec 11, 2007
I cant get past boot screen into windows with out the password. (computer description) HP 6630 Pavillion with WIN 2000 Pro, both floppy and CD inputs.
View 4 Replies
View Related
Nov 23, 2009
I have a Windows XP Professional Edition and i incurred a spyware virus on my PC, so i made a dumb decision by running MSCONFIG and changing my SAFEBOOT option, I did this because previously I couldn't even get into Safe Mode, it would load the files on the screen.
View 1 Replies
View Related
Apr 2, 2008
Unable to get past the windows log on. Quote. The system could not Log you on. Make sure your User name and domain are correct, then type your password again using the correct case Unquote. (I used the enter key as the password when setting pass word up.)I am using w.XP Prof. with an ASUS 47V133 AGP Pro/4X motherboard. part of the KT4AV Series.I have been having a series of problems lately, including loss of sound (built in sound card) and also no LAN connection for broadband. (also built in - tried a new card but no change) main problem is I cannot get into it at all now.
View 8 Replies
View Related
Jun 8, 2008
I can't get XP Pro to get past "Setup is starting Windows" ,to allow me to format.Loads all drivers up to that point,then the error in above post.Pressing F6 or F10 to install 3rd party(XFX MB drivers) has no effect,and Alt-F2 ultimately gives error also.S prompt is no joy also.Tried F8 for Safe Boot and no joy.Cleared CMOS several times.All drives are there in CMOS. All RAM (4 Gigs) is detected I raised Memory voltage to 1.9 volts standard for my ram),and raised FSB to 1600 Mhz from 1333 (standard also).Put timings to standard 7-7-7-24T Tried Memory linked/unlinked/Auto/1T/2T I Tried only 1 SATA drive,and 1 Gig of RAM with 1 DVD RW /2 drives and 2 Gig of RAM,I Enabled standard RAID for each and every drive and ultimately disabled them cause I want the XFX 790i ultra motherboard RAID Drivers.
View 6 Replies
View Related
May 13, 2007
I have a compaq presario 2500 laptop with windows xp home edition sp1 installed. I had left my computer at the desktop screen to go do something and when I came back avast antivirus had come up with a message saying that one of my files was infected with a trojan. i believe the file was stored in the system or system32 folder. anyways, it had reccomended me to move the file to avast's "virus chest", so I did. and i went ahead and worked on my laptop as normal. then after shutting my computer down and starting it back up later in the day, i found that my laptop would not load any further than the blue "windows is starting up..." screen. i let it sit there for about 30 mins. so then i went to my desktop and started researching my problem on google. i tried going into safe mode, but it still gets stuck at the same screen.
View 5 Replies
View Related
May 8, 2008
My ACER Aspire pc won't boot past the Windows Logo. I tried to boot in safe mode but had the same problem. I am running XP home addition. It just keeps going round in circles, I get the Acer logo, then Windows and keeps repeating itself. I tried all the f8 options ie safe mode and starting from last known config but to no avail.
View 2 Replies
View Related
Nov 8, 2009
I left my computer in "suspend", and when I sat again, it was frozen at my BIOS screen. Each time I try to restart it, it goes straight to that screen. I can't even access my BIOS settings (pressing keyboard buttons doesn't work). Nothing changed when I placed my XP disk in the ROM drive.
I'm using an ASUS mobo and AMD processor (sorry, I can't recall the particular models right now). I have not changed any hardware or installed new software recently except anti-virus definitions.
Does this sound like a motherboard or PSU issue?
View 3 Replies
View Related
Nov 8, 2009
I left my computer in "suspend", and when I sat again, it was frozen at my BIOS screen. Each time I try to restart it, it goes straight to that screen. I can't even access my BIOS settings (pressing keyboard buttons doesn't work). Nothing changed when I placed my XP disk in the ROM drive.
I'm using an ASUS mobo and AMD processor. (Sorry, I can't recall the particular models right now.) I have not changed any hardware or software recently.
Does this sound like a motherboard issue?
View 6 Replies
View Related
Feb 19, 2009
After a visit to the wonderful land of pornography, my dell (about 5 years old) has decided that it doesn't want to boot past the loading screen. Just before this happened, I booted up and the screen froze on the desktop, flashing some distorted lines across the center of the screen. I have tried rebooting multiple times and running diagnostics, but nothing appeared wrong. I'm going to assume its virus related.
View 4 Replies
View Related
Oct 12, 2007
I'm working on a Dell Inspiron 1000 that won't boot past trying to load the Mac address. Here's what I get with powering on: SiS 900 PXE Boot ROM v1.09b Hook Int18. CLIENT MACK ADDR: 00 0F 1F BC 5C EA GUID: 44454C4C-3400-1059-804C-C8C04F4C3431 DHCP ... (It sits & spins for a few seconds here.) PXE - MOF: Exiting Intel PXE ROM.
View 8 Replies
View Related
May 2, 2005
My friend has a XP Home OS. When he fires up his computer, that sucker wont boot past the little loading bar. It just stays there indefinently. I had him boot off the 6 XP boot discs and run "FIXBOOT" to re-write the boot sector, still nothing. We booted up off the XP-CD and ran the setup so we could run the repair (R), files loaded and the computer restarted. Still nothing happened.The files that remain on his computer are so fragile that doing a fresh install of his OS would be a disaster. Any thoughts as to restoring the computer?
View 4 Replies
View Related
Dec 7, 2008
i have a samsung model p29 laptop but have a problem when i boot the machine i get to the log on page, input my pass word then it says loading personalized settings then it says logging off saving settings !!! i know i have 2 virus's 1 is a win32 privacy remover (found by kapersky )the other is associated with ad-aware but i can tell what it is as it boots too fast for me to read what it is:(.I have tried to boot in safe mode but it just dose the same as when i boot in normal mode i dont want to reformat the hdd as there are a lot of family pictures that i want to save
View 4 Replies
View Related
Aug 18, 2008
Crashed computer and can't boot up again. I can't get past the finger print security in Safe mode or any other way I try to boot up. It does not show the box for typing in the password either. Just gives error when swiping finger.
View 14 Replies
View Related
Feb 8, 2005
I was working on my friend's computer and I had to switch the hard drive over to his new computer to try and get it to work on the new computer. It didn't work, so I tried to put the harddrive back in its original computer and now I have a problem. When I try to start up the computer, everything runs fine through the POST and then, before it goes to the Windows screen with the little bar that goes sideways, it stops on a black screen with the blinking underscore (_). I've restarted it many many times and it all ends up the same, stopping at the flashing underscore. I've tried to boot to a Win 98 boot floppy to get it to the command prompt but I get an error saying that it is the incorrect disk. I've also tried to reset the bios by taking the battery out for a while. It reset the bios good and all but I still got the same problem. I think it has to do with the MBR cause I know the harddrive works (as a slave in another computer) and I know the RAM is new. I don't think those are the problems because before I put the harddrive in the new computer to try and boot off it, it worked fine. I can't get into the start up menu either by pressing F8. The only thing I can think of that might work that I haven't tried is to boot off the XP cd and do the recovery console thing. Unless I know that it will abosolutely fix it, I'd like to stray away from it. If you think otherwise, I'll gladly try it. I think I had a problem like this before and I got past it somehow, but I don't remember how I did it.
View 14 Replies
View Related
Oct 15, 2008
after removing and reformating HD,I put HD back in my Compaq Evo D500 and it won't get past the initial recognization of the floppy drive.The floppy indicator light remains ON,and I can't seem to go beyond Strike F1 any ideas on what went wrong?I checked the connections and the memory sticks to see they were all seated right,but it doesn't count up the memory in the upper left corner at this point I'm lost!
View 3 Replies
View Related
Apr 20, 2010
I am working on a Dell Optiplex GX270 that will not boot past the splash screen in normal mode, nor will it go into safe mode. I'm not getting any errors, just a very faint splash screen. So far I've tried (with no success):
1) changing power supplies
2) put in a new video card
3) put in a different hard drive with a fresh Windows XP install
4) different memory
View 3 Replies
View Related
Feb 24, 2007
I'm working on a Compaq Deskpro EN500 running Windows XP Professional SP2 (with all patches and updates), current antivirus and antispyware, and firewall. The system was working fine, user was online browsing the web when the system froze. The mouse froze, etc. Start button could not be accessed. The user shut down the system with the power button. When he turned it back on, he was greeted with the standard Microsoft 'an error has occured' screen' and given the choices of Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good
Start Windows Normally
When I choose any of these, I can get as far as the Windows XP splash screen and then the system seizes. I can get into the Windows Recovery Console. I have run a CHKDSK /P /R and a FIXBOOT. CHKDSK returns no errors. I'm not sure what to try next short of a rebuild.
View 14 Replies
View Related
Aug 20, 2009
i have toshiba laptop and i had to restart after installing poweriso but now it wont go past the windows xp boot screen itll just stay on the black screen it will not boot in safe mode or anything it freezes on the recovery console i have pretty much tryed everything
View 1 Replies
View Related
Sep 5, 2006
I am trying to get my computer to boot but having problems. It gets to the title page of windows xp and stays there...I wanted to do a system restore but when I go onto log on page my mouse isn't working either.....what should I do?
View 3 Replies
View Related
May 17, 2005
i'm getting really desperate here. Heres my problem I was on my fully functional computer last night, here are the specs
-Windows XP Home
-512 DDR ram
-Geforce FX 5200
-Intel Pentium 4
-i865Gm-IL **NEW** motherboard (funtioned perfectly)
Alright, last night, the power went out while i was on the computer. When the power comes back on, i get a blue screen saying
UNMOUNTABLE_BOOT_VOLUME
I absolutely CANNOT get past this screen, i've tried booting in safe mode, and still get nothing. I've tried TONS of commands from the recovery console. When I load up the console it asks me to choose either D:MiniNT (Which i believe is not what i use) and D:I386 I've tried the following commands on BOTH d:MininNT and D:I386
chkdsk /r
chkdsk /f
chkdsk /p
fixboot
fixmbr
I've tried them all, and i get the exact same error, i was on the phone with a good friend whos a comp technician and he had no answers, then I phoned the mobo company, still no answers. I've tried unplugging my HDD, still nothing. I am TOTALLY lost!! could someone
View 13 Replies
View Related
May 13, 2008
A dell inspiron 1000 and it will not boot past the splash screen. when i try to hit f2 or f12 it says entering setup or boot menu but will not go further.
View 14 Replies
View Related
Jun 22, 2005
In some of my windows such as the graphics option window of the window for ez cd creator the text is too large not allowing me to see the whole window.
View 1 Replies
View Related
Sep 4, 2008
Since installing IE7 the open windows on the taskbar show the url instead of the website name. For example instead of showing 'Yahoo' it says http://yahoo.com. Is there a way to change this?
View 4 Replies
View Related
Jun 4, 2005
when I try to play a movie preview with either media player 9 or 10, I get good audio but a black video window. the media seems to be mpeg-4 video v3 if that helps any. I'm sure it's operator error of some
sort on my end!
View 8 Replies
View Related
Sep 7, 2006
I have XP installed and have run the computer for about 2 years without problem. However, 2 days ago, the computer won't boot up and without any signal to the LCD monitor. I noticed that the CD drive was lit up once I switched on power on the computer. The CD drive light kept on and the computer did not go any further.
View 7 Replies
View Related
May 17, 2005
Every time I reboot a setup window appears. When I click the next button an error say can not install on windows NT.
View 5 Replies
View Related
Jul 26, 2005
I am running XP Professional have recently installed Nokia PC Suite 6.6 When I boot up I get an Explorer window opening at D:Program FilesCommon (D is my boot drive). If I remove the software I don't get the Explorer window.
View 1 Replies
View Related
Jan 6, 2009
I have an older Sony Viao desktop. Today I thought it would be a good idea to change the drive letters around in the Computer Managment utility that comes with Xp. So I have 3 physical drives, one of them is external, and I tryed to take the two Cd/dvd drives and move them to the bottom of my drive list by disableing them, then going to the Computer Management Utility, right clicking on my Local H drive, and selecting Change Drive Letter... Did that, then went back to the device manager, enabled my two cd/dvd roms, and everythign seemed to be in order... LOL! Until I restarted my computer. Now windows wont boot up. Wont boot from MY copy of Xp, and to top it off, the bios freezes as sson as I hit any key.
View 5 Replies
View Related
Feb 24, 2010
My motherboard went kaput. I got a new motherboard and was going to avoid formating by using a repair install. I did the repair install and booted to windows (in safe mode) but it crashed on agp440.sys, which seems to be a fairly common problem with outdated chipset drivers. I know I can disable this driver in the recovery console, but when I boot to my XP disk, it cannot find my XP installation, It just goes straight to the screen where I can pick a partition to install onto. How did my XP install get lost? I recently fixed up my boot records and everything was fine, I was always able to use the recovery console. Obviously the install is there since I can start booting to it.
View 4 Replies
View Related
Sep 14, 2005
I have an older Sony Viao desktop. Today I thought it would be a good idea to change the drive letters around in the Computer Managment utility that comes with Xp. So I have 3 physical drives, one of them is external, and I tryed to take the two Cd/dvd drives and move them to the bottom of my drive list by disableing them, then going to the Computer Management Utility, right clicking on my Local H drive, and selecting Change Drive Letter... Did that, then went back to the device manager, enabled my two cd/dvd roms, and everythign seemed to be in order..Now windows wont boot up. Wont boot from MY copy of Xp, and to top it off, the bios freezes as sson as I hit any key. So Im hoping someone can help me with this problem, because I have lots of important data on that machine that I need access to
View 5 Replies
View Related